I have a problème when I try to generate a Ssh Key as requested in the instructions of this Symfony Bundle :
LexikJWTAuthenticationBundle
When I use this command :
openssl genrsa -out config/jwt/private.pem -aes256 4096
The process doesn't finish, here is what I have : openssl genrsa with AES
But it works perfectly without the use of AES (either: -aes256 or 128 or other ..)
Do you know why ?
(Then, do you think I can continue without using AES ?)
Thank you.
I had the same problem, when I was using openssl from my Git Bash (command line installed with git on Windows, and openssl is coming by default with it). Later on, I installed OpenSSL on windows itself, you can can download it from here, add it in path variables in your pc, then you would be able to use it from your CMD anywhere and it works the same way as it's described in JWT docs.
Hope it could help you and someone else.
You are probably using OpenSSL on Windows in a Linux like subsystem like MinGW.
There seems to be an issue in displaying the passphrase prompt in this setup. You can bypass the prompt by specifying the password using the -passout option of OpenSSL:
openssl genrsa -out config/jwt/private.pem -aes256 -passout pass:PASSWORD 4096
You can however not generate a key with one of the encryption switches like -aes256 and not specify a password. Or you will get errors like this as a passphrase is obviously needed for the encryption:
$ openssl genrsa -aes256 -out ca-key.pem -passout pass: 4096
Generating RSA private key, 4096 bit long modulus
........++++
..................................................................................++++
e is 65537 (0x10001)
5588:error:0906906F:PEM routines:PEM_ASN1_write_bio:read key:pem_lib.c:373:
Related
I try to generate with OpenSSL a peer of key.
userner#userner-VirtualBox:/certs$ openssl genrsa 2048 >frugalCA.key
However, the output can not be generated in this file frugalCA.key and I got this error:
bash: frugalCA.key: Permission denied
I would be very grateful if you could help me pleaz?
Use the -out flag:
openssl genrsa -out frugalCA.key 2048
But from the output shown, you probably don't have the write permission in that folder.
It works for me with this command line:
openssl genrsa 2048 | sudo tee frugalCA.key
You need to be specific on where you want your output, as the default location may be restricted.
C:\Program Files\OpenSSL-Win64\bin>openssl genrsa -out C:\Users\user123\Downloads\MyOrganization_auth.key 2048
I am writing a shell script which executes a command which requires a password. I cannot put password in plain text in the script. I read about openssl encrypt decrypt mechanism but for encrypting a file again I need a password which again I cannot put in the script. I am clueless what is the best way to have a script execute a command using a secure password.
After reading about Using OpenSSL to encrypt messages and files on Linux, the following approach might work for you.
Assuming you have private and public key generated for your machine
openssl genrsa -out passwordPrivKey.pem 2048
openssl rsa -in passwordPrivKey.pem -out passwordPubKey.pem -outform PEM -pubout
OpenSSL could be used than to encrypt and decrypt a password. Providing a script stub which will demonstrate how to use the command.
#!/bin/bash
echo -n "password" > PASSWORD.plain
# To encrypt
openssl rsautl -encrypt -inkey ./passwordPrivKey.pem -pubin -in PASSWORD.plain -out PASSWORD.dat
# To decrypt
DECRYPTED=$(openssl rsautl -decrypt -inkey ./passwordPubKey.pem -in PASSWORD.dat)
echo $DECRYPTED
On the machine where the password is needed unencrypted later, only PASSWORD.dat and passwordPubKey.pem would be stored.
You may also interested in Hiding Password in Shell Scripts, Password encryption and decryption or How does OpenSSL decrypt a password.
Try openssl. It is a command available on UNIX and it can hash your password for you.
https://www.openssl.org/docs/man1.0.2/apps/openssl.html
It depends on where you execute that script from. If it's a continuous integration tool, there should be way to define a system variable, visible in your script.
I have created a certificate authority and need to generate and sign 50+ certificates. I wanted to script this process. I don't want to have to manually enter a password 100+ times!
Here is the command I was getting hung up on:
openssl req -newkey rsa:1024 -keyout ~/myCA/tempkey.pem -keyform PEM -out ~/myCA/tempreq.pem -outform PEM
The problem is, it wants me to create a password with these prompts:
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
When I am just being asked for a password to input I can use the -passin pass:mypass command line option for openssl. But this does not seem to work for creating a password.
Also, it seems strange that a password is required when later I just end up removing it with:
openssl rsa < tempkey.pem > server_key.pem
I tried creating a simple Ruby script:
require 'open3'
Open3.popen2("openssl req -newkey rsa:1024 -keyout ~/myCA/tempkey.pem -keyform PEM -out ~/myCA/tempreq.pem -outform PEM") {|i,o,t|
i.puts "mySecretPassword"
i.puts "mySecretPassword"
}
But this does not seem to work either. I still end up with a manual prompt asking me to create a password.
As explained in this answer you can use the -passout pass:foobar option to set a password via command line. For example:
openssl req \
-newkey rsa:1024 -keyout ~/myCA/tempkey.pem -keyform PEM \
-out ~/myCA/tempreq.pem -outform PEM \
-passout pass:foobar \
-subj "/C=US/ST=Test/L=Test/O=Test/CN=localhost"
The problem is most of utilities that expects a password do require interactive terminal. So if you try to fake it (like you did with a Ruby script) it will not work. You could also try:
echo -n "pass\npass\n" | openssl req ....
While this will work with some programs, those what require interative shell will not work.
You are searching for the tool called expect. Install it on your UNIX/Linux/MacOS and see the man page:
man expect
...
Expect is a program that "talks" to other interactive programs according to a script. Following the script, Expect
knows what can be expected from a program and what the correct response should be. An interpreted language pro‐
vides branching and high-level control structures to direct the dialogue. In addition, the user can take control
and interact directly when desired, afterward returning control to the script.
...
You need to create "expect script", it really depends on your environment - what the application is asking for. If it is only a passwords, it should be simple. Here is more complex example: http://fixunix.com/openssl/159046-expect-script-doesnt-create-newreq-pem.html
I think this should work (you will maybe need to change it a bit):
#!/usr/bin/expect -f
spawn -console openssl req blah blah blah blah
expect "Enter PEM pass phrase:*" {send "password\r"}
expect "Verifying - Enter PEM pass phrase:*" {send "password\r"}
Good luck!
I am trying to run OpenSSL from Node.js in order to create a CSR. Basically, this works fine, but now I have a problem I can not solve.
Basically, what I want to do is to create a CSR from a key. The appropriate command is
$ openssl req -key private.key -new -subj "/C=DE/ST=..."
This outputs the CSR to stdout. So far, this is fine. What I now want to change is that I do not need to have the private key in a special file, instead I want to provide it from stdin. So, basically I'd like to run OpenSSL like this:
$ openssl req -new -subj "/C=DE/ST=..."
But since the -key parameter is now missing, this forces OpenSSL to create a new private key. How can I tell OpenSSL not to create a new private key, but to use the one I provide via stdin?
PS: I am aware of the option to hand over /dev/stdin to the -key parameter, but this will only work on OS X and Linux, not on Windows.
Instead of going to Extension Builder > Build Package…, I'd like to built a .safariextz package from the MyExtension.safariextension folder.
I know I can unpack an extension with xar -xf. I suspect the way back involves packing it with xar, but then I'll need to do the code signing thing, which may or may not involve codesign(1).
Here are Omar Ismail's instructions, omitting the need for separate shell scripts. This will all occur in a directory safari/, where we will be signing the directory safari/appname.safariextension/ to become the extension safari/appname.safariextz. The first thing is to sign the extension the official way, with Extension Builder's Build Package.
Set up Xar:
1. Download and unzip/untar
https://github.com/downloads/mackyle/xar/xar-1.6.1.tar.gz
to wherever you want the executable xar-1.6.1 (xar 1.6dev doesn't support the options we need)
2. in xar-1.6.1/
./configure
make
sudo make install
sudo ln -s /full/path/to/xar-1.6.1/src/xar /usr/local/bin/xar161
Set up your certificates:
1. in safari/
mkdir certs/
xar161 -f appname.safariextz --extract-certs certs/
2. open Keychain Access and export your Safari Developer certificate to safari/certs/certs.p12 (use a blank password for certs.p12, and then use your Mac's password to export the cert)
3. in safari/certs/
openssl pkcs12 -in certs.p12 -nodes | openssl x509 -outform der -out cert.der
(same blank password)
openssl pkcs12 -in certs.p12 -nodes | openssl rsa -out key.pem
(same blank password)
openssl dgst -sign key.pem -binary < key.pem | wc -c > size.txt
It's possible that you can get the certificates from certs/cert.p12, and not need the --extract-certs step (and hence not need the extension built the official way), but I don't know openssl well enough, and it's only for the set up that you need that step anyway.
Once everything is set up, to sign the extension:
In safari/
xar161 -czf appname.safariextz --distribution appname.safariextension/
xar161 --sign -f appname.safariextz --digestinfo-to-sign digest.dat --sig-size `cat certs/size.txt` --cert-loc certs/cert.der --cert-loc certs/cert01 --cert-loc certs/cert02
openssl rsautl -sign -inkey certs/key.pem -in digest.dat -out sig.dat
xar161 --inject-sig sig.dat -f appname.safariextz
rm -f sig.dat digest.dat
This was all on a 2006 Snow Leopard MacBook, so it's possible things may be different on a machine that's more up to date.
Looks like there is a way to patch XAR with a signature option. http://code.google.com/p/xar/issues/detail?id=76#c0