i am new to jmeter. i would like to run multiple urls at one shot and display the results on one screen. finding hard to config urls through csv file and in jmeter.
my sample url:
http://10.56.34.67:7065/services/sample/2070
http://10.56.34.67:7065/services/sample1/2070
http://10.56.34.67:7065/services/sample2/2070
like this i have more thn 100 url to test it.
could you please tell me the format to store urls in csv file and how to config the csv file in jmeter?
It has simple as
Click Ctrl+0,Ctrl+1 which adds Thread Group and HTTP Request in side
In HTTP Request add ${path} to Path field
In Thread Group choose Loop Count Forever
Add CSV Data Set Config by right click on Thread Group -> Add -> Config Element
CSV Data Set Config parameters :
a. Put the fileanme in Fileanme field
b. Enter in Variable Names path
c. Choose Recycle as False
d. Choose Stop Thread as True
Click Ctrl+R (run)
It will go through all URLs and submit them sequentially
To view results you can add View Results Tree (Click Ctrl+9) and you will see all your requests/responses.
It seems your data here is your URLs.
So instead of using multiple samplers for each URL, you can go for CSV Data config and store all your URLs there and name the column as URL.
you can refer to this in your single http sampler as ${URL}.
Your CSV should look like this
In Server name put ${URL} and in the Thread Group check the forever check box
You don't need CSV for this use case, the easiest way would be going for __StringFromFile() function.
In the HTTP Request sampler put the __StringFromFile() function into "Path" input field like:
The textual function representation is ${__StringFromFile(urls.txt)}, you will need to replace urls.txt with full or relative path to the file where your URLs are listed
That's it, each time the request is called JMeter will read the next line from the file and substitute request path with the string from file:
See Apache JMeter Functions - An Introduction article to get familiarized with JMeter Functions concept
Related
I am receiving below response in jmeter-
[{"Status":"Failed","ErrorDesc":"Duplicate Transaction Id","Amount":"23","CorporateID":"aaa","StatusCode":"ERR0DUP","TransactionReferenceNumber":"1111"}]
I need to save this whole response message.
I tried by using listner,and using csv file as well but only b able to save response like - OK,true
Please help me to save whole response as it is.
You could use the Save the Response to a File Sampler with following configuration
Ensure "Don't add number to prefix" check box is not checked
Set the Minimum Length of sequence number (e.g 6)
You can try with following options for unique file names
Check the Add timestamp
Use ${__threadNum} and/or ${__threadGroupName} fields with file name
response-${__threadGroupName}-{__threadNum}.json
If you want to save response into a variable just use Boundary Extractor with empty left and right boundaries or Regular Expression Extractor and (?s)(^.*) regular expression, see The Boundary Extractor vs. the Regular Expression Extractor in JMeter article for more details to learn more about differences of these two guys.
Example setup:
in the above setup the whole response will be saved into a JMeter Variable and you will be able to refer it as ${response} where required
If you want to save response into a file - go for Save Responses to a file listener, add it as a child of the request which returns the response and configure it like:
the above configuration will store the whole response of the parent sampler into response.txt file in "bin" folder of your JMeter installation
My question is - if I run a test via Jmeter, for example , if it's a site which enables you to book a flight, and you choose your source and destination when you record it.
Is it possible to pass different values to the destination field? I mean, maybe a txt file with some destinations and pass it to the Jmeter test and then, you will have some tests which each of them is running with a different destination?
If yes, how can I do it?
It's not necessary that it will be a txt file. Just a way to pass different values to one parameter.
Important: I'm using blazemeter plugin for chrome.
Thanks a lot,
appreciated.
You can use CSV Data Set Config. It is very easy to use for parameterizing variables in the test plan.
Check this article on blazemeter to understand the CSV Data Set Config quickly.
Depending on what you're trying to achieve you can go for:
HTML Link Parser. See Poll Example which shows how you can use it for selecting random values from inputs
You can extract all the possible values from the previous response using a Post-Processor, most probably CSS Selector Extractor and configure each thread to use its own (or random) value from the input
And last, but not the least, you can use an external data source like .txt or .csv file and utilize __StringFromFile() function or CSV Data Set Config so each thread (virtual user) would read the next value from file instead of using recorded hard-coded values.
There is a URL which I want to hit and save the response. The URL id needs to be incremented each time and save the response. For example -
First Get Request - http://google.com/getdata/?Id=1
First Response - one
Second Request - http://google.com/getdata/?Id=2
Second Response - two
and so on...
I want to hit the request with increment the id each time and save the response
I have tried using fiddler but unable to figure how to increment the id and save the response.
P.S. - I have to make around 6,00,000 hits
Since the 'Postman' tag is mentioned, I can help you regarding how to implement this in Postman.
Postman has a nice feature of using 'variables'.
You can use environment variables or globals.
Read more about these on their docs:
https://www.getpostman.com/docs/v6/postman/environments_and_globals/variables
You can use a global variable such as 'counter' and set it to 1 / whatever starting point you want.
Then you can modify your request like so :
http://google.com/getdata/?Id={{iteration}}
Now, in the Tests script of the request you can write the following script
let i = parseInt(pm.globals.get('iteration')) + 1;
pm.globals.set('iteration', i);
Also, to access the response you can use the following command in Test script:
console.log(pm.response); // Use pm.response as per your needs
Save the request in a collection.
Now load the Postman's Runner and select the collection.
Now you can put an iteration count of 6,00,000 and hit run!
Remember, heavy iterations will cause performance degradation.
In JMeter you need to click , Ctrl+0 and Ctrl+1 to create , Thread Group and HTTP Request
In Thread Group put the number of hits you need in Number of Threads (users)
In HTTP Request Put in Server Name or IP www.google.com and in Path /getdata/?Id=${__threadNum}
__threadNum will create increasing number from thread 1 to number of hits.
For small number of hits or debugging you can add View Results Tree to view request/response by clicking Ctrl+9 in Test Plan/Thread Group level.
To save the response use Post Processor, especially by adding Regular Expression Extractor below HTTP Request by clicking Ctrl+2.
Allows the user to extract values from a server response using a Perl-type regular expression. As a post-processor, this element will execute after each Sample request in its scope, applying the regular expression, extracting the requested values, generate the template string, and store the result into the given variable name.
Import to notice that for load testing you need to work with non GUI mode, which means call jmeter using command line as jmeter -n -t myTest.jmx
you will use Command-line mode (called Non-GUI mode) to run it for the Load Test.
Don't run load test using GUI mode !
For saving all responses to a one file see save response data or if you want to save file per thread/user you can add Save Responses to a file
Fiddler:
Open script editor (Control + r ) then add the following code inside OnBeforeResponse
static function OnBeforeResponse(oSession: Session) {
if(oSession.oRequest["X-SAVE-ME"] != "")
{
oSession.SaveResponseBody("C:\\tempfiddler\\" + oSession.SuggestedFilename);
}
}
Go to the "Composer" tab and include the header X-SAVE-ME with any value, in the URL, replace your ID with # (just like this: http://google.com/getdata/?Id=#) fiddler will now ask for the starting and ending value of ID before executing;
Please find the snapshot below for your scenario.
Scenario_Testplan
First, go to user properties and put "sample_variables = ID, Response_File_Name" or whatever the name you choose for the variables. Restart jmeter.
Create the below plan:-
CSV data set config to have incremental values and response file name
HTTP request will use ${ID}
Save response to a file will use ${Response_File_Name}
Hope this will help.
I would do this by command line, using a while loop with a curl to the URL, storing the body result on the standard output to a file. It would look something like this:
for i in {1..600000}; do curl "http://google.com/getdata/?id=$i" > body-result-id-$i; done
I couldn't test the line above because I don't have any access to a console right now, but I think it should work.
In Burp you can do this using the Intruder tool. First, capture a sample request in Burp. If you're unsure how to do this, please consult the getting started documentation.
Then right-click the request and selected "Send to Intruder".
In the Positions tab within Intruder, first click "Clear" then select the section you want to vary, and click "Add"
In the Payloads tab select the Payload type as "Numbers" and configure the range.
Click "Start attack"
For more information, consult the documentation.
One Another solution is that you can use Counter in jmeter. That you can find from below path
Thread Group > configElement > Counter.
Configure the Counter as per your need.
Give the Reference Name i for counter.
Use the variable in your request
For more information.
This is my test URL " http://appr.seconddemo.org/hitssurveys/survey?uid=113&offerid=311&subid=subvalues&offr_id={Email} "
I want to hit the url 1500 times per second , and want to change the "{Email}" with real value in each iteration.
How it's possible please give me a step by step guide.
Considering that you need to pass the emails from the external file, the most efficient way that we are using in software testing companies is to pass the variable from .csv or .txt files using 'CSV Data Set Config' element of the JMeter.
Please find the steps that you need to follow:
Add a 'CSV Data Set Config' element from 'Config Element' by right-clicking the thread group
Set Filename field with complete path to your .csv or .txt file that contains your emails
Set Variable field as 'Email' [This variable name should be same as you set in your url request]
Ignore first line to False
Set other fields as per your requirement
Now add HTTP Sampler in your Thread Group and set the Protocol, Server Name, Method & Path as instructed in the screenshot:
Create .csv or .txt file and add all emails separated by new line:
Hope this answer is useful.
You can use the CSV Data Set Config. Put all your email credentials in the CSV file and make sure you have put this CSV file in your JMeter /bin directory.
Add a CSV dataset config in your test plan. Your CSV dataset config should be like:
Now in your thread group, define the number of threads you want to execute and then in your sampler put the path as follows:
http://appr.seconddemo.org/hitssurveys/survey?uid=113&offerid=311&subid=subvalues&offr_id=${Email}
Depending on where do your emails live there are following options:
If they are in a text file, each email on a new line you can use __StringFromFile() function like:
If they are in a database you can use JDBC PreProcessor to fetch the data from the database table column and put your request under ForEach Controller
If you need to provide just some random characters you can use __RandomString() function.
More information: JMeter Parameterization - The Complete Guide
I need to upload 100 images through JMeter.
How can I load paths and names into JMeter's HTTP Request quickly?
First use a CSV DataSet that will contain the paths of the list of files to send. Name variable to fileName
Put images in bin folder of jmeter
use Http Request and in field "Send files with the request" use ${fileName} , the right parameter name used by your upload form and the right mime type (you may add a column to csv for this). Set other fields of HTTP Requesf like path, host port to the right values
In thread group configure 100 iterations
Run you test