I install Oracle Developer Suite 6i on Windows 10 Professional 64-bit, but when i run form builder, its give the error \ORANT\DBS\FMCUS.MSB not found. but when i search this file in in installed 6i directory this file is exist there, when i google this error, i found a solution: its suggest me to run the form builder in compatibility mode of windows XP service pack 2. but still its show the same error given below:
Message file \ORANT\DBS\FMCUS.MSB not found
Kindly suggest me what should i do to get rid from this error. Thank You!
Typically errors like this mean the software does not know precisely where it is installed. A couple of options that might resolve this (I say might because that is some very old software you've got there).
Try setting ORACLE_HOME as an environment variable
Look in the registry for the the key which nominates where Forms is installed and set ORACLE_HOME there.
Create a batch file which sets ORACLE_HOME and then launches Forms
If you still have an old installation of Oracle Developer Suite. Look for the keys like :
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OH155385982] and
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Oracle\KEY_OH267560998].
Export them as Key_ODS64.reg and Key_ODS64_Wow.reg, respectively.
Go to your new installation's machine and Import by double-clicking.
Related
I am running SQLManagementStudio_x86_2012_ENU.exe to install SQL Server 2012. I came across a problem and I was hunged on it too long.
I have seen the same problem in SO and they are give a solution for that. I also over come that problem but again stuck again in half way through. So I am going to ask this again(not a spam)
Problem: When I ran above mentioned exe it was installed fine, Then I tried to create a instance of the server. I used SQL Server Installation Center in configuration tools. then I selected new SQL Server and it asks me to select the SQL Server Installation Media. I selected C:\Program Files (x86)\Microsoft SQL Server but it was invalied.
then I figured out that it is asking for the Installation media itself. So I extracted the .exe file to a folder and selected that path. that was taken as a valid media.
I refered to this link.
some have mentioned that this was a bug here.
when I clicked next it gives the following error. so that I can not proceed and create a instance. Can some one help me on this.
thanks in advance.
I have tried lot of things to come up with a solution for this. As you can see in the picture, there are only 2 check boxes which are already checked and disabled. This is not the right .exe file to run(I was unable to create a server instance using this). I downloaded the right SQL server installation file from here.
There are several .exe files that gives different functionality enhancements. I chose SQL server with tools which is about 1GB. I did not have to uninstall the existing sql server installation. I installed this and it worked fine. I will post back if I found a way to create a SQL server form the given installation. If you have the same problem as described above, most probably you are using the wrong .exe file.
Good luck with your fix.
I am using Oracle 11g. I had exported data using the installed version of SQL Developer to a sql file called "export.sql". Now, I have downloaded the new version which is 3.1.07 and when I try to import data by clicking on the tree view and choosing Tables | Import Data and navigating to "export.sql", I get the following error:
no readers are registered for the sql type
When I first started the application it asked for the path to java.exe and I have shown that path and application started. I have the started the application from the path where it was downloaded (C:\users\kaushik\Downloads\sqldeveloper)
You can call the file directly from sql developer.
Example: If you saved you file to c:\Oracle\MyBackups\Export.sql
Then from within Sql Developer, connect to your database and use the sql command:
#C:\Oracle\MyBackups\Export.sql
and that will execute the Export.Sql script.
If you have a valid SQL file, you simply need to execute the script. Open the file (File | Open and navigate to export.sql), hit the Run Script button (F5 on Windows), and choose the connection you want to use. The Data Import Wizard supports a number of different file formats (Excel, CSV, etc.). It doesn't support SQL files. If you want to ask the developers why they don't support SQL (or why they use the general file navigation dialog rather than using different dialogs for different sorts of files) you can ask them over in the SQL Developer forum on OTN. I assume the problem is that most SQL scripts contain much more than simple INSERT statements and it would be challenging to figure out whether any particular script was actually just a bunch of INSERT statements that could be used to import data.
Yes, SQL Developer is written in Java so you need to have an appropriate version of the JVM installed. Different SQL Developer download options include a bundled JVM or you can download a smaller file and use an already installed JVM.
One of oracle client tools to make session to database is sqlDeveloper and its graphical interface tool Programmed with Java Lang and its installed independently from oracle_home its a stand alone product and Of Course it needs SDK Or JDK to work
make sure to set the path and check it
read this link http://www.ehow.com/how_5127784_set-java-path.html
all of this if sql developer didn't run and other similar problem
this to answer
Is JDK is needed or what ? Yes
use sql Developer higher version
i am upgraded to Version 20.2.0.175
issue resolved
i have created a application in VB6.0 which is connected to MySQL through ODBC connection,there are two dsn which connects to application.Now i want to create a setup of the application that i can install on any computer.but how? I tried using Package and Development wizard in VB but it gives me error "access denied ieframe.dll" something like that while installing it AND also after using that wizard,now all my forms are corrupt.I craeted new and i don't want this to happen again.Help me!!
tired googling now!!!
I am not sure of the version of VB6 you are running, I do know that there was an InstallSheild Light version that shipped with Visual Studio 6 Professional. It was an optional install. If you have your original installation media try looking for it. There was also Visual Studio Installer 1.1 that used to be available from Microsoft. I found a link on Web.Archive.org that still works. I have used this to build msi files for VB6 in the past. You need to have Visual Interdev because it gets added as project type to it.
And since you mentioned that the Package and Deployment Wizard corrupted your project, you should make a backup of your data or use some type of source control. It will be a lot less painfull to recover when problems occur.
First of all, I take it that the two DSNs are not relevant to this problem?
I have never seen the error "access denied ieframe.dll", but I would guess that you are trying an installation via internet explorer. I would try creating a standard application installation.
I have to say that I am surprised to hear of "corruption" of your forms. Do you really mean your source code? Or this the forms in the executable. In any case, you really should be using some form of source control.
In any case, if you want a better answer, try giving a step by step run-throught of exactly what you are doing.
Regards,
Mark
I am trying to run a .NET application which uses System.Data.OracleClient on a Win7 x64 workstation. The workstation has a 32bit Oracle client installed, which leads to the following error message:
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
So this is my long journey of tries and failures:
I tried to install the Oracle client win64_11gR2_client. But during the setup process it crashes without any comment.
I followed an answer from a different SO thread, tried and extracted the instantclient-basic-windows.x64-11.2.0.2.0, and put the folder containing the binaries in the windows PATH variable. I still get the same error message though (even after rebooting).
I followed the "alternative way" from this answer and copied the files oci.dll, orannzsbb11.dll, and oraociei11.dll into the bin/ folder of my web site project. Still the same error message.
I tried and copied all files from the instant client into that directory and tried again, without success.
I installed ODAC112021Xcopy_x64.zip and put the installation folder and the bin folder in the windows PATH variable. No success.
I put my hope on this answer and reviewed the DllPath in the registry (which is actually supposed to relate to ODP.NET as opposed to System.Data.OracleClient) and saw that DllPath points to the correct x64 installation of ODAC, so, if my application wasn't using System.Data.OracleClient, it should work,b but since it does use that, it still failed.
I googled and stackoverflew but didn't find anything else that the posts I already referred to.
I carefully crafted this SO question in the hope of getting any insightful advice from an enlightened SO user.
After getting the first answer from b_levitt, I tried and added the following lines to the Global.asax at Application_Start:
Environment.SetEnvironmentVariable("ORACLE_HOME", #"C:\OracleProducts\Odac-11.2.0.2.1-x64");
Environment.SetEnvironmentVariable("PATH", #"C:\OracleProducts\Odac-11.2.0.2.1-x64;C:\OracleProducts\Odac-11.2.0.2.1-x64\bin");
C:\OracleProducts\Odac-11.2.0.2.1-x64 is where I installed the ODAC 64 bit xcopy version. No success either.
On a related note, I even tried to force my .NET app into 32bit mode without success, but that's a different thing. I need a forward-looking solution, which means 64bit.
Your #5 should have worked but you also need to set the ORACLE_HOME environment variable. I've done this many times including recently with the very xcopy install that you are using. Please check out my experience with the xcopy install and let me know what kind of additional errors that you get.
In my case I was setting it up for asp.net, but winforms is even easier. You can open a cmd window, use the "set" command to set both the PATH and the ORACLE_HOME environment variables and then run your app from that same cmd window. Once you get the bugs worked out, you can use the Environment.SetEnvironmentVariable to set these within your code.
For the record, I do avoid installing the oracle client on client machines by handling all of the business logic via web services. That way I only need the oracle components on the web server.
I had the same problem you have. I found most of my answers through Oracle forums and here at stackoverflow. I can't post links for reference but I can give you some things to try out.
Also include OraOps11w.dll in your bin directory along with the other Oracle dll files.
Go to the project properties|Reference Paths, add C:\Windows\Microsoft.NET\Framework64\v2.0.50727 or C:\Windows\Microsoft.NET\Framework64\v4.0.30319 to the Reference paths depending on which framework version the project is using.
**Fuzzy part that I don't remember well: Remove the System.Data.OracleClient current reference and add the new reference from C:\Windows\Microsoft.NET\Framework64\v2.0.50727 or C:\Windows\Microsoft.NET\Framework64\v4.0.30319 to the Reference paths depending on which framework version the project is using.
See if the exception goes away.
FYI, Microsoft is dropping Oracle data provider (in ADO.NET) support in the near future. It currently works through .NET 4, but it is a good idea to start testing the native Oracle drivers.
I have an app that uses a local version of ODAC 11 below the directory that the .exe file is in. The idea is that we want our app to use the local ODAC 11 regardless of what else the user has installed on her machine.
Oracle.DataAccess.dll is in the same directory as the .exe.
It works fine when the client machine has no Oracle client installed, but I get an error when starting it on a machine with Oracle Database 10.2.0.something installed:
The type initializer for 'Oracle.DataAccess.Client.OracleConnection' threw an exception.
[Stack Trace]
The provider is not compatible with the version of Oracle client
OracleException
at Oracle.DataAccess.Client.OracleInit.Initialize()
at Oracle.DataAccess.Client.OracleConnection..cctor()
I'm guessing that this has something to do with the runtime binding policy, but a search for "Oracle/ODAC/ODP.NET runtime binding policy" on Google has not turned up anything useful.
Does anyone know how to resolve the issue?
If not this specific issue, can someone point me towards an overview of how to do what I want to do: make sure that my application uses the ODAC 11 no matter what?
So as I understand it, the issue was that while Oracle.DataAccess.dll was in the same directory as the app, it could not find its lower-level homies (oci, et al), hence the compatibility error.
Turns out that if you want an application to work with ODAC 11 xcopy deployment regardless of what else the user may have installed on her machine, you need to do 2 things:
Set the PATH environment variable for the process. (I was already doing this.)
Set the ORACLE_HOME environment variable for the process. (I was not doing this.)
Environment.SetEnvironmentVariable("PATH", Environment.CurrentDirectory + "\\oracle\\11.1\\odac;" + Environment.CurrentDirectory + "\\oracle\\11.1\\odac\\bin;", EnvironmentVariableTarget.Process);
Environment.SetEnvironmentVariable("ORACLE_HOME", Environment.CurrentDirectory + "\\oracle\\11.1\\odac", EnvironmentVariableTarget.Process);
EDIT: It's also important to note that Oracle will throw this error not just for environmental issues, but also if one of the files is missing on the target machine. I got this same error on other machines despite the Environment settings because I had Subversion set to ignore directories called "bin", so the OraOps DLL was not being copied to the client.
An article titled "Deploying ODP.NET with Oracle Instant Client" found at http://alderprogs.blogspot.com/2009/04/deploying-odpnet-with-oracle-instant.html gave what was for me about the best explanation of how to deliver a stripped down xcopy type deployment with your application. Only 5 Oracle DLLs required for support.
That said the answers by ObiWanKenobi and Josh Kodroff provides important additional info which matches with my experience.
Add to that: http://www.brothersincode.com/post/Oracle-ODPnet-xcopy-deployment-for-aspnet.aspx
You want to force your ODP.NET drivers to use the copy of oci.dll that is in your local folder, instead of the one already installed.
You can force this by either
setting the PATH variable so the system finds your copy of of oci.dll first (as in the answer by Josh Kodroff)
or
you can use ODP.NET configuration section in app.config (or web.config) to explicitly set the value of "DllPath".
For details, see http://ora-00001.blogspot.com/2010/01/odpnet-minimal-non-intrusive-install.html and http://database.in2p3.fr/doc/oracle/Oracle_Database_11_Release_1_(11.1)_Documentation/win.111/e10927/featConfig.htm
If you're using oracle client 10.2.0.1 or 10.2.0.2, Oracle Note 215255.1 indicates that if you apply patchset 10.2.0.3 it fixes the issue. Get the 10.2.0.3 database patch (852MB) and patch the client home. Yes, it's the full database server patchset, but it applies to the client as well.