I have below syntax that would compare the modified date of xml files against f1_mdate variable.
typeset -f mdate | ssh 101.101.101.101 "cd "$tar_dir"; $(cat); for xml_file in *.xml; do mdate_xml=$(mdate $xml_file) if [[ "$f1_mdate" == "$mdate_xml" ]]; then echo 1; fi; done"
xml_file: unbound variable
mdate_xml: unbound variable
can somebody please help point out why it is getting unbound variable?
I believe the problem is quoting; this will be clearer if I put line breaks where the shell sees closing quotes:
typeset -f mdate | ssh 10.225.28.45 "cd "\
$tar_dir"; $(cat); for xml_file in *.xml; do mdate_xml=$(mdate $xml_file) if [[ "\
$f1_mdate" == "\
$mdate_xml" ]]; then echo 1; fi; done"
In terms of how to write that correctly... that gets very tricky, because you have two layers of shell which are interpreting commands, stripping quotes and interpolating variables. I usually write a small shell script, scp it to the remote machine and run that remotely, just to get around that... or use a tool like ansible.
As an example of how to get data to and from the remote machine: I created /tmp/a.sh on the remote machine foo. Here's the content of /tmp/a.sh:
while read line
do
echo "xyzzy> $line"
done
On my local machine, I have /tmp/xyz containing
foo
bar
baz
Running
cat /tmp/xyz | ssh foo bash /tmp/a.sh
will give
xyzzy> foo
xyzzy> bar
xyzzy> baz
xyzzy>
You can re-direct the output to a file:
cat /tmp/xyz | ssh foo bash /tmp/a.sh > a.txt
The file a.txt will be on your local machine.
Related
I want to change the name of a file if it is already present on a remote server via SSH.
I tried this from here (SuperUser)
bash
ssh user#localhost -p 2222 'test -f /absolute/path/to/file' && echo 'YES' || echo 'NO'
This works well with a prompt, echoes YES when the file exists and NO when it doesn't. But I want this to be launched from a crontab, then it must be in a script.
Let's assume the file is called data.csv, a condition is set in a loop such as if there already is a data.csv file on the server, the file will be renamed data_1.csv and then data_2.csv, ... until the name is unique.
The renaming part works, but the detection part doesn't :
while [[ $fileIsPresent!='false' ]]
do
((appended+=1))
newFileName=${fileName}_${appended}.csv
remoteFilePathname=${remoteFolder}${newFileName}
ssh pi#localhost -p 2222 'test -f $remoteFilePathname' && fileIsPresent='true' || fileIsPresent='false'
done
always returns fileIsPresent='true' for any data_X.csv. All the paths are absolute.
Do you have any idea to help me?
This works:
$ cat replace.sh
#!/usr/bin/env bash
if [[ "$1" == "" ]]
then
echo "No filename passed."
exit
fi
if [[ ! -e "$1" ]]
then
echo "no such file"
exit
fi
base=${1%%.*} # get basename
ext=${1#*.} # get extension
for i in $(seq 1 100)
do
new="${base}_${i}.${ext}"
if [[ -e "$new" ]]
then
continue
fi
mv $1 $new
exit
done
$ ./replace.sh sample.csv
no such file
$ touch sample.csv
$ ./replace.sh sample.csv
$ ls
replace.sh
sample_1.csv
$ touch sample.csv
$ ./replace.sh sample.csv
$ ls
replace.sh
sample_1.csv
sample_2.csv
However, personally I'd prefer to use a timestamp instead of a number. Note that this sample will run out of names after 100. Timestamps won't. Something like $(date +%Y%m%d_%H%M%S).
As you asked for ideas to help you, I thought it worth mentioning that you probably don't want to start up to 100 ssh processes each one logging into the remote machine, so you might do better with a construct like this that only establishes a single ssh session that runs till complete:
ssh USER#REMOTE <<'EOF'
for ((i=0;i<10;i++)) ; do
echo $i
done
EOF
Alternatively, you can create and test a bash script locally and then run it remotely like this:
ssh USER#REMOTE 'bash -s' < LocallyTestedScript.bash
Below is an example of a ssh script using a heredoc (the actual script is more complex). Is it possible to use both local and remote variables within an SSH heredoc or command?
FILE_NAME is set on the local server to be used on the remote server. REMOTE_PID is set when running on the remote server to be used on local server. FILE_NAME is recognised in script. REMOTE_PID is not set.
If EOF is changed to 'EOF', then REMOTE_PID is set and `FILE_NAME is not. I don't understand why this is?
Is there a way in which both REMOTE_PID and FILE_NAME can be recognised?
Version 2 of bash being used. The default remote login is cshell, local script is to be bash.
FILE_NAME=/example/pdi.dat
ssh user#host bash << EOF
# run script with output...
REMOTE_PID=$(cat $FILE_NAME)
echo $REMOTE_PID
EOF
echo $REMOTE_PID
You need to escape the $ sign if you don't want the variable to be expanded:
$ x=abc
$ bash <<EOF
> x=def
> echo $x # This expands x before sending it to bash. Bash will see only "echo abc"
> echo \$x # This lets bash perform the expansion. Bash will see "echo $x"
> EOF
abc
def
So in your case:
ssh user#host bash << EOF
# run script with output...
REMOTE_PID=$(cat $FILE_NAME)
echo \$REMOTE_PID
EOF
Or alternatively you can just use a herestring with single quotes:
$ x=abc
$ bash <<< '
> x=def
> echo $x # This will not expand, because we are inside single quotes
> '
def
remote_user_name=user
instance_ip=127.0.0.1
external=$(ls /home/)
ssh -T -i ${private_key} -l ${remote_user_name} ${instance_ip} << END
internal=\$(ls /home/)
echo "\${internal}"
echo "${external}"
END
In a script.sh,
source a.sh
source b.sh
CMD1
CMD2
CMD3
how can I replace the source *.sh with their content (without executing the commands)?
I would like to see what the bash interpreter executes after sourcing the files and expanding all variables.
I know I can use set -n -v or run bash -n -v script.sh 2>output.sh, but that would not replace the source commands (and even less if a.sh or b.sh contain variables).
I thought of using a subshell, but that still doesn't expand the source lines. I tried a combination of set +n +v and set -n -v before and after the source lines, but that still does not work.
I'm going to send that output to a remote machine using ssh.
I could use <<output.sh to pipe the content into the ssh command, but I can't log as root onto the remote machine, but I am however a sudoer.
Therefore, I thought I could create the script and send it as a base64-encoded string (using that clever trick )
base64 script | ssh remotehost 'base64 -d | sudo bash'
Is there a solution?
Or do you have a better idea?
You can do something like this:
inline.sh:
#!/usr/bin/env bash
while read line; do
if [[ "$line" =~ (\.|source)\s+.+ ]]; then
file="$(echo $line | cut -d' ' -f2)"
echo "$(cat $file)"
else
echo "$line"
fi
done < "$1"
Note this assumes the sourced files exist, and doesn't handle errors. You should also handle possible hashbangs. If the sourced files contain themselves source, you need to apply the script recursively, e.g. something like (not tested):
while egrep -q '^(source|\.)' main.sh; do
bash inline.sh main.sh > main.sh
done
Let's test it
main.sh:
source a.sh
. b.sh
echo cc
echo "$var_a $var_b"
a.sh:
echo aa
var_a="stack"
b.sh:
echo bb
var_b="overflow"
Result:
bash inline.sh main.sh
echo aa
var_a="stack"
echo bb
var_b="overflow"
echo cc
echo "$var_a $var_b"
bash inline.sh main.sh | bash
aa
bb
cc
stack overflow
BTW, if you just want to see what bash executes, you can run
bash -x [script]
or remotely
ssh user#host -t "bash -x [script]"
I'm trying to remotely process a while read line loop via ssh with the following:
ssh /root/.ssh/id_rsa "while read var; do echo \"- $var -\"; done < /tmp/file; cat /tmp/file"
/tmp/file exists remotely. Output of the command should be:
- /tmp -
- /var -
/tmp
/var
But output actually is:
- -
- -
/tmp
/var
Why doesn't $var get filled here when remotely executed ?
If I happen to connect a console via ssh to the machine and execute the same command, it works as expected.
You should use single quotes or escape the $ in $var. Right now $var is getting substituted before ssh runs.
ssh /root/.ssh/id_rsa 'while read var; do echo "- $var -"; done < /tmp/file; cat /tmp/file'
$var is getting expanded before the ssh because it's inside double quotes. If you make the command you're passing to ssh be in single quotes it won't get expanded, or if you escape the $ you should be set:
ssh /root/.ssh/id_rsa 'while read var; do echo "- $var -"; done < /tmp/file; cat /tmp/file'
or
ssh /root/.ssh/id_rsa "while read var; do echo \"- \$var -\"; done < /tmp/file; cat /tmp/file"
I need to read the variable from a remote file over SSH and compare it. But I get a variable in the wrong format. how to do it correctly?
#!/bin/bash
pass='dpassspass'
user='root#10.10.19.18'
IP="10.2.1.41"
path=/sys/variable/serv
#not work## No such file or directory# write=$(sshpass -p $ovhpass ssh -t $user echo "$IP" > $path)
sshpass -p $pass ssh -t $user << EOF
echo "$IP" > $path
EOF
my_var=$(sshpass -p $pass ssh -t $user "cd /sys_ovh; ./serv.bash")
echo mystart-"$my_var"-myend
read=$(sshpass -p $pass ssh -t $user cat $path)
echo start-"$read"-end
echo start-"$IP"-end
if [ "$read" == "$IP" ]; then
echo "run"
fi
output:
Connection to 10.10.19.18 closed.
-myendt-10.2.1.41
Connection to 10.10.19.18 closed.
-endt-10.2.1.41
start-10.2.1.41-end
Where I make a mistake? How to take data from the SSH?
The vars my_var and read are filled with a string ending with '\r', telling echo to go back to the first column. I think this is a problem with your local script. You can correct that with
tr -d "\r" < myfile > myfile2
Your fundamental problem comes from using unquoted here documents for the commands. You should properly understand in which order the shell interprets these contructs.
ssh remote cmd >file
executes cmd remotely, but first redirects the output from the ssh command to the local file.
ssh remote "cmd >’$file'"
The quotes cause the redirection to be part of the remote command line. The variable file is interpreted first, by the local shell, though.
ssh remote 'cmd >"$file"`
The single quotes prevent the local shell from modifying the command before sending it. Thus, he variable interpolation and the redirection are both handled by the remote shell, in this order.
So your commented-out "not work" command could easily be fixed with proper quoting. However, it will be much more elegant and efficient to use a single remote session, and execute all the commands in one go. Mixing the local variable IP with remote variables calls for some rather elaborate escaping, though. A major simplification would be to pass the value on standard input, so that the entire remote script can be single quoted.
#!/bin/bash
pass='dpassspass'
user='root#10.10.19.18'
IP="10.2.1.41"
result=$(echo "$IP" |
sshpass -p "$pass" ssh -t "$user" '
path=/sys/variable/serv
cat > "$path"
cd /sys_ovh
./serv.bash
cat "$path"')
echo mystart-"${result%$'\n'*}"-myend
echo start-"${result#*$'\n'}"-end
echo start-"$IP"-end
if [ "${result#*$'\n'}" == "$IP" ]; then
echo "run"
fi
The output from the remote shell is two lines; we pick it apart by using the shell's prefix and suffix substitution operators.