I'm working in an old iOS/Objective-C project.
To support my app in iPhone X, I've added iPhone X launch image in my project, and it seems my app is supporting full screen in iPhone X.
So, Is it necessary (strongly) to upgrade all graphics to 3X in order to support iPhone X design? or just launch image is fine to get my app approved from Apple?
Are there any chances to get my app rejected, if I only add launch image for iPhone X, and keep all assets in 2X size??
Related
Here is a screen shot of an ipad 10.5 inch running my app which takes up around 50% of the screen real estate. How do I force the app to use 100% of the screen real estate? (I am using xcode 10)
You have to specify it in Xcode. If you don't the ipad is getting a scaled up version of ui for iPhone 4. Open Xcode and specify it "General" project settings.
May be your IOS setting preference is wrong. You are opening your application on ipad but XCode rendering your application as iPhone app.
Go to general setting and select "iPad" in Deployment Info section.
Go to Build Setting and select "iPad" in Targeted Device Families under Deployment section.
Restart your project.
I'm currently using Expo to build an iPhone app.
I'm not supporting iPad and I have it so when it builds on iPad it runs in an iPhone Simulation.
The problem is I can't develop with Expo using this approach.
The app shows up as an iPad app, but this is not the mode being shipped to users.
According to this I might have some luck adding ios.supportsTablet to the app.json file and setting it to false but it didn't change anything.
Is there another configuration value I'm missing to force iPhone simulation mode on an iPad?
I'd rather not eject if I don't have to.
According to this, there currently isn't a way to live develop using "iPhone mode" on an iPad.
The Expo Client app can’t change its tablet support on the fly,
unfortunately, so it will always adapt your project to the iPad
viewport.
So, following the above forum here is how you get around it:
Run exp build:ios -t simulator
Open Simulator
Select Hardware/Device/iOs 11.x/iPad x generation
Unpack the generated build from the first command
You should have a file named yourApp.app
Drag that file into the iPad you are running in Simulator
It will install the app on the device and you can then view your creation
This is faster than doing a whole build cycle with TestFlight just to see your changes.
But it still leaves a bit to be desired.
My app is supposed to run only on Iphone but apple is testing it on Ipad too. Apparently, the apps can run in Iphone mode on Ipads. How do I know which Ipad will run which Iphone mode (ex: ipad mini air2 = iphone 5 view settings in iphone mode?)?
How can I change the size of my UI based on changing aspect ratio programmatically ? (My views are created through code).
The iPad Pro runs an iPhone 6. The iPad 2 and Air 2 run an iPhone 4s.
I don't know if there's official documentation for this, but what I did is create a sample app and set the Devices to iPhone only. Then I added
print(self.view.frame.size) //Swift
NSLog(#"width = %f, height = %f", self.view.frame.size.width,
self.view.frame.size.height); //Obj-C
in the default ViewController. This will print the screen size of the view only, and not the entire iPad's screen. I then compared the printed value to the printed value of the same app run in iPhone 6/4s. You can try it too.
In terms of changing the size of your UI to fit different screen sizes, your best bet is probably AutoLayout. There are many (free, open source) frameworks available that make creating AutoLayout constraints programatically much simpler.
A few are Stevia, Cartography, SnapKit (Swift) / Masonry (Obj-C), or PureLayout.
As you said your app is supposed to run on iPhone only, then do the following process.
Select your project target in Xcode and goto General in which there is one section Deployment Info
Change the Devices to iPhone from dropdown
this will open app on iPhone only.
Please suggest me.How to solve this.
I got this reason from iTunes Store**"iPhone Apps must also run on iPad without modification, at iPhone resolution, and at 2X iPhone 3GS resolution"**
But I built in only for iPhone.
I got answer of my question.But i didn't change anything in my code.I submitted the same build to the AppStore.App store is accepted my same binary,This is worked for me.
In order to determine if your app is running in iPhone resolution on iPad, embed this code in you opening view controller class:
-(void)viewDidAppear:(BOOL)animated
{
[super viewDidAppear:animated];
NSLog(#"width = %f, height = %f", self.view.frame.size.width, self.view.frame.size.height);
}
If your app is displayed in iPhone resolution, you will see this in the output console:
width = 320.000000, height = 480.000000
I had the same app rejection reason and it turned out that in FACT my app WAS in iPhone resolution on the iPad, but in iPhone 4 resolution (which I didn't design it for) which made it look like it was in iPad resolution even though it wasn't. Apple has dropped support for the iPhone 4 with iOS 8 and will likely drop support for iPhone 4S with iOS 9, so I neglected to design the app for iPhone 4 which meant that some of my UI elements at the bottom of the screen were not visible on the iPad displaying iPhone 4 resolution. That was the reason for the rejection (really dumb since it's not even an iPad app).
This is what I got back from Apple Developer Technical Support:
While your app may be built for iPhone or iPod, it must still run on
iPad. Did you test your app on an iPad prior to submission? If you
don't have an actual iPad device to test with, many issues that lead
to a 2.10 rejection can be spotted by testing in the iPad simulator.
I'll go over a couple of the most common ones here:
1) Controls or Important Content That Underlap the Status Bar
If your app places controls or important content in the twenty points
below the top of the screen, they will be cutoff when the app is run
on a retina iPad [1]. This can lead to a poor user experience. Make
sure that your app positions controls and important content below the
status bar. You can use the topLayoutGuide property from within your
UIViewController instance to access the current status bar height.
You can also create Auto Layout constraints between the topLayoutGuide
and your view controller's subviews to ensure they remain positioned
below the status bar at all times.
https://developer.apple.com/library/ios/documentation/UIKit/Reference/UIViewController_Class/Reference/Reference.html#//apple_ref/occ/instp/UIViewController/topLayoutGuide
2) Authoring Your Interface Specifically For the 4" Screen
Both the iPad and iPad retina simulate a retina 3.5" display when
running iPhone apps. This means that content positioned 480 points or
more below the top of the screen will not be visible when the app is
run on an iPad (or an iPhone 4, and iPhone 4s for that matter). This
can lead to a poor user experience. Make sure that you have designed
your interface to adapt to any height. This means either adopting
Auto Layout[2] or overriding
-viewWillLayoutSubviews/-viewDidLayoutSubviews in your view controllers to manually position your elements for the given screen
size. If your app displays more content than will fit on a 3.5"
screen, consider placing it in a scroll view.
https://developer.apple.com/library/ios/documentation/WindowsViews/Conceptual/UIScrollView_pg/Introduction/Introduction.html
Before we continue, please try running your app on either an iPad
device or the iPad simulator (both the regular and retina). See if
you can spot either of the above issues in your app. If you can't,
send me screenshots from your tests and we'll work from there.
[1]: When an iPhone app is run on a retina iPad, a 20 point black bar
is overlaid atop the app's window, obscuring any content underneath
it.
[2]: To get started with Auto Layout, you'll want to watch the
Introduction to Auto Layout for iOS and OS X session from WWD 2012
https://developer.apple.com/videos/wwdc/2012/?id=202 followed by the
Auto Layout by Example session from WWDC 2012
https://developer.apple.com/videos/wwdc/2012/?id=232.
The iTunes AppStore auto generates some listings on its published pages. One of them is "Requirements:" and shows the devices that this app is compatible with. iPod, iPhone or iPad etc.
QUESTION: Where is this REQUIREMENTS listing set during the build process?
I have submitted an app that I 'thought' was properly configured because the Xcode settings for iPhone and NOT iPhone/iPad. But apparently this is either broken or I am totally confused as to where this is set and how its created on the AppStore.
Can someone enlighten me?
If you create an app that is iPod/iPhone only, it will still run on an iPad, just not as an iPad native app. That is to say, an iPhone/iPod-only app will run in an iPhone-sized window on an iPad. I do not think that you can say you want your iPhone app NOT to run on iPad.
When you select iPhone/iPad for your app type in Xcode, that is telling Apple and iTunes that your app binary is a universal app -- built for both platforms.
may be it's done by apple reviewers according to this guidelines limitation
App Store Review Guidelines:
2.10
iPhone apps must also run on iPad without modification, at iPhone resolution, and at 2X iPhone 3GS resolution
... or else it will be rejected.
What's the problem? When you start a project you get to choose whether its for iPhone or iPad or both. When you submit it to apple this is also checked against your iOS build version and other things (normally though if there's a conflict it'll let you know before submission - eg: if you haven't included the iPad icons and your app says that its for iPad too).
In XCode4 theres a nice handy interface now that you can use. If you select your project in the left hand pane and click on your main target in the main window you can select the iOS application targets that your app is for.
In your Project settings Version, Device and Deployment Target are where the iTunes Requirements come from. If you choose only iPhone, then your requirements will inlcude iPod touch.
I believe this is the answer you are looking for:
http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneosprogrammingguide/App-RelatedResources/App-RelatedResources.html