Bundle install fails, Gem install succeeds - ruby

When trying to bundle install on a Gemfile that contained only the GitHub Pages gem and nothing else, on Ubuntu 18.04, I got error messages telling me to try installing eventmachine using gem install. That always succeeds, but bundle install still fails. How can I get bundler to see that the gem is installed?

I fixed this after many hours of struggle, by noticing that on the GitHub Pages repo there's a note that says
Important: Make sure you have Bundler > v1.14 by running gem update bundler in your terminal before following the next steps.
I have no idea why this mattered but I removed my ruby packages from Ubuntu and reinstalled them, then installed bundler with rubygems, which gave me a newer version:
sudo apt-get remove ruby
sudo apt-get install ruby ruby-dev
sudo gem install bundler
bundler --version
If anyone knows why I needed that version of bundler, or how I should have diagnosed this faster, I'd be interested to hear it. I'm not new to programming but I'm new to Ruby.

From my understanding it might be the gem you are trying to install requires a specific feature provided by bundler. If you check the change log of bundler there is some changes related to install github based gems on how to correctly read the user git settings. So I think that might be where the problem is from.

Related

How to start over with a clean gems install for jekyll?

I've been working on a blog using Jekyll so I installed Ruby with this command from the Jekyll doc:
sudo apt-get install ruby ruby-dev build-essential
Then I installed the gems directory to my home folder. I tried out a lot of different themes and just run bundle install when my terminal said I was missing any dependencies. Now I have a lot of packages installed inside the gems folder. Is there a way for me remove unnecessary gems and start over without uninstall gems?
It is highly recommend to not use system ruby but use a ruby version manager. One reason is that you won't have to use sudo before your gem commands.
If you want to remove all your current gems you should be able to just do
gem uninstall --all
But you might need to prepend it with sudo gem uninstall --all
If you intend to do any longer term work / multiple projects with ruby, I recommend using RVM. You can find detailed install instructions here
Some prefer rbenv however it's install instructions seem to be focused on MacOS, so if you're on linux, I dunno.
You can just run:
gem uninstall [gemname]
to remove them one at a time.

How to run bundle install as normal user

I am attempting to use bundle install. I am not a Ruby user - this is my first real foray into even running rake. I'm simply trying to user some packages from ThrowtheSwitch.org that use Rake and so on.
I initially installed ruby several days ago using:
sudo apt-get install ruby-full
This allowed me to use rake with Unity testing framework. Now I'd like to use CMock. the instructions for using CMock say to cd into the directory then
$ bundle install
$ bundle exec rake
So I install bundler using:
$ sudo apt-get install bundler
But then running the bundle install continuously asks me for my password. So I try:
$ gem install bundler
Which fails for write permissions on /var/lib/gems/1.9.1. So I try:
$ sudo gem install bundler
which installs OK so I try the bundle install again. But still get continuously asked for my password. So I try:
$ sudo bundle install
And get a warning that I should not run bundler as root:
Don't run Bundler as root. Bundler can ask for sudo if it is needed, and installing your bundle as root will break this application for all non-root users on this machine.
How can I install this properly so that I can run it as expected?
Note: I have seen that there are several other questions on this topic, none of which I understood the answers to so let me underline that I am not a ruby (or even web stack) dev - I need this in layman's terms as much as possible.
Note also: I did see several mentions of RVM and rbenv. I'm not sure if they were incidental to those questions in particular or if one or both is required. I do not currently have either. Am about to research exactly what they are now.
Note the third: My platform is WSL (so Ubuntu, kind of).
I've been working with Ruby only a few weeks now. I'll say, I know where you are. I am not about to help much but will say, to your last question in the comments, that my understanding is that the two commands are different.
My understanding of a short answer.. One can have diff versions of Ruby they need to work with (legacy projects, etc) and not every version of Ruby can run every version of a given gem. For this reason, one can use rbenv or rvm to help manage the art of setting up a project with a particular version of ruby and then installing the needed gems.
I've been working with rvm on my mac and rbenv in linux and find them both similar enough for the simple stuff I've been doing. Installing rbenv on linux proved slightly easier. Once set up properly, sudo is no longer needed to install gems - which is preferred. I would recommend trying one of these and installing per their website instructions. Things should go smoother once set up.
Try running:
gem install bundler
bundle install
I will try to explain how the ruby ecosystem works:
Bundler is a gem - a module - that is installed on top of ruby. Gems are installed using
gem install <gem name>
I would recommend you look at installing a ruby version manager before doing anything else. the two main candidates are RVM and rbenv.
I find RVM is the simpler option for the beginner, but it eats up more space on your hard drive.
check out how to install rvm at https://rvm.io/
alternatively look at rbenv at https://github.com/rbenv/rbenv
after you have installed ruby you can test that it is installed correctly by calling ruby -v from the command line.
After that you can install bundler by calling gem install bundler
Once the gem is installed you should be able to run bundler, however if you are using rbenv you might need to run rehash first
I hope that explanation makes sense - please shout if you have questions.
If you - for some reason - stuck with a system installation of ruby,
this does the job:
export GEM_HOME="$(ruby -e 'puts Gem.user_dir')"
export PATH="$GEM_HOME/bin:$PATH"
found it elsewhere: https://guilhermesimoes.github.io/blog/using-bundler-with-system-ruby

Why can't bundler find rake when it's obviously installed?

I'm trying to migrate a version of Redmine from backup to a new server; I'm migrating from Redmine 3.2.3 to 3.3.0. I installed the new version of Redmine (from Bitnami Stack) on my new server and everything loads properly. When I move my old database into the new version, I have to run
bundle exec rake db:migrate
to migrate my database. But... bundler can't find rake somehow even though gem list shows it clearly installed. Can I force bundler to use the version of rake that I have installed that it says I don't?
I should mention I've done no customization at all, haven't installed any gems, or changed ruby versions or done anything. This is out of the box Redmine.
I noticed after I made the question that I had two versions of rake installed. I removed both and reinstalled rake 11.1.2 and have the same problem.
You are probably using the wrong ruby binary. Note that, the installers for Bitnami Stacks are completely self-contained and run independently of the rest of the software or libraries installed on your system.
Also, taking a look at the screenshots you have shared, you were using ruby 1.9.3 when you have executed ruby -v and the Redmine Bitnami Stacks uses ruby 2.1.9. Probably this is the reason of the issue you are having.
If you want to use the ruby (and the other components) shipped with the Bitnami Stack you need to run the following command:
cd *INSTALLDIR*
./use_redmine
This command will open a new console session with the environment configured to use the stack.
There are two things:
ruby gems available via gem list
ruby gems availbale via bundler
When you are using bundle then bundler is looking for gem from Gemfile. You can have multiple gems installed in your system, but when you are using Gemfile then gem version will be taken from Gemfile.lock
Summing up:
$ bundle exec rake ...
require to have rake gem inside Gemfile
$ rake ...
it will take the newest version of rake gem installed in system
I hope it helps you.
This is how I finally got my Redmine upgraded:
A version of ruby outside of the one provided by Bitnami somehow got installed on this machine as well as another version of bundler. The first thing I did was uninstall the apt-get version of bundler. I had to manually remove /usr/bin/bundler and /usr/bin/bundle for $ which bundle to stop finding bundler even after the removal.
I saw that the Bitnami stack's ruby was version 2.1.x but found Ruby 1.9.3 was installed to /usr/bin/ruby1.9.3/ with $ which ruby. I took the commands from here and removed that version of Ruby.
Running $ ruby -v now gave me nothing as Ruby wasn't installed anymore (even though it was in the Bitnami stack). Bitnami's Ruby then had to be (re?)added to my path in ~/.profile. $ ruby -v now gives me the correct version.
$ gem list was no longer telling me that rake was installed. I tried running $ bundle install where Gemfile is but was complaining about mime-types being locked at a lower version and wouldn't do anything. I got around that with $ bundle update but then ran into the infamous nokogiri problem where it complains that everything required by nokogiri isn't installed.
Since I'd dealt with this before (many many times) I went over to the Nokogiri Website's install page and followed the instructions for troubleshooting on Ubuntu:
sudo apt-get install build-essential patch
sudo apt-get install ruby-dev zlib1g-dev liblzma-dev
and now $ bundle update worked on my Gemfile. Redmine upgraded and my users are about as happy as users can get.

Bundler::GemfileNotFound whenever I try to run bundle install

I'm working in kali-linux (a linux distro witch is the continuation of Back-Track, based in Ubuntu, just that now is based on Debian wheezy) for some penetration testing. Everything was working just fine, until I decided to update my systems tools. Now whenever I try to run a tool based on ruby, it trows me:
Could not find gem 'ruby-progressbar (>= 1.1.0) ruby' in the gems available on this machine.
Run `bundle install` to install missing gems.
I proceed to run bundle install but then it comes with Bundler::GemfileNotFound error.
Kali use by default ruby, for using gems. The software don't 'require' any other package but ruby seems not-fully-configured/installed for the problem at hand.
$ ruby --version
ruby 1.9.3p194 (2012-04-20 revision 35410) [i486-linux]
$ rvm
bash: rvm: command not found
$ rbenv
bash: rbenv: command not found
I faced the same problem when I was trying to bundle install without realizing that I was not in the project directory. Make sure you're in the current project directory.
to avoid this error you should be at the root of your application and create GemFile and specify all gems needed in there, and run bundle install
The problem was that for some weird motive Ruby didn't detected that bundler was installed, although the package manager says so.
$ apt-cache policy bundler
bundler:
Installed: 1.3.5-2
Candidate: 1.3.5-2
$ bundle --version
Bundler::GemfileNotFound
I simply run gem install bundler then bundler install as root in the tool root path and everything works as charm.
Do you use rvm or rbenv? If so, make sure you are using a particular ruby version.
For rvm, rvm list and look for an indication next to your ruby version. If the correct one is not listed, run rvm install x.y.z. If the correct one is not selected, run rvm use x.y.z
If you want to segregate your gems for a given project, create a gemset. Otherwise, you should be good to go.
Run gem install bundler. You should not have to do this as sudo. This will install bundler in either the Default rvm gemset, or the selected gemset.
Bundler should now be available and can be run using bundle. This is the same as bundle install.
Try this:
sudo ln -s /var/lib/gems/1.8/bin/bundle /bin/bundle
sudo ln -s /var/lib/gems/1.8/bin/bundler /bin/bundler
Worked for me in debian.

Can't install JSON gem

I need to install json because I get this error:
Could not find json-1.4.6 in any of the sources
I ran gem install json and bundle install but I was only able to install json-1.5.1 when I need json-1.4.6
I have gem 'json', '1.4.6' in my gemfile, so I'm not sure what's going on...
UPDATE
I get this error:
Installing json (1.4.6) /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/fileutils.rb:1216:in `chmod': Operation not permitted - /Library/Ruby/Gems/1.8/gems/json-1.4.6/CHANGES (Errno::EPERM)
After checking logs by running $ heroku logs
I found "An error occurred while installing json (1.4.6), and Bundler cannot continue.
Make sure that gem install json -v '1.4.6' succeeds before bundling."
I then removed 2 json entries from the Gemfile.lock and had no further issues.
Why did you run gem install json at all? Bundler takes care of that for you and will ensure that the correct version of each gem is installed (since sometimes dependencies require an older version). Run
gem uninstall json
bundle install
Also ensure you have source 'https://rubygems.org' at the top of your Gemfile.
As for the permissions info, you may have to run gem and bundle commands with sudo.
By the way, I highly recommend taking a look at and using RVM, particularly the gemsets feature. It will make your life infinitely better when developing Ruby apps. If you decide to do so, I'd also suggest trashing all the gems you've install using the system Ruby by running sudo rm -rf /Library/Ruby/Gems/1.8/. It's also important that when using RVM you don't have to use sudo when running gem (or bundle), which is not only safer but less typing too.
Please update your rubygems by executing the following command..
gem update --system
may be it will solve the problem. After updating your gem. Then run the following command to install json
gem install json
Now you can get json gem installed in your system.
Try:
$ sudo apt-get install ruby1.8-dev
If you're using rbenv, try rbenv rehash
I had this problem when trying to build a website with Jekyll.
Turned out I hadn't followed all the instructions at https://jekyllrb.com/docs/installation/ubuntu/
I don't know if it was the missing packages or commands into ~/.bashrc but it fixed the problem in two instances of Ubuntu in WSL
Remove the json entries from the Gemfile.lock file and try to re run bundle install..

Resources