After trying to start the run mode, I get a fatal error on the target system :
Init7\IO: Set State TComObj PREOP OP >> AdsWarning: 1861 (0x745, ADS
ERROR: timeout elapsed) Anyone of you know how to fix it??
Is your target system running Windows 10? Has it recently been updated (Windows Update) to version 1803? If so, the problem is because TwinCAT is not compatible with the 1803-version of W10. Beckhoff did release an updated TwinCAT version 3.1.4022.20, but removed it as it caused other problems. They will release a new version in the coming days.
That often occurs when you have EtherCAT bus in the system and there are problems. For example you could have an EtherCAT slave configured and it is not found when trying to start the system. So check you I/O configuration.
Of course, the problem could also be the one that Jakob described.
We ran into intermittent 1861 (0x745) errors with Twincat2 on Win10 version 1809 communicating with a CX8090. We did not see the intermittent 1861 errors on Win10 version 1709.
Based off of Jakob's, answer we tried updating the TcAdsDll.dll and AdsDll.dll from the latest Twincat 2.11 x64 Engineering release install (which was 2305) and it resolved our intermittent 1861 errors.
I'm not sure if anyone else out there still uses Twincat2, but this might help someone else searching for a solution to the 1861 error code.
Related
This HIP Runtime is recent, just release I think in the previous release. I have no idea how to install this thing (the correct version), but all I know is that I am unable to harness the complete potential of my GPU because of this error. Anyone faced a similar issue and got this resolved?
Thanks!
when i install modelsim10.4SE in my windows10 completed. but when run modelsim there comes an error.could sameone help me ?enter image description here
The first Modelsim 10.4 version was released back in 2014 and had no Windows 10 support, perhaps more importantly it also didn't support Windows 8.1 yet, so I think you simply stumbled upon a Windows compatibility issue.
Try to run Modelsim (vsim/vcom/vlib/etc) in Windows7/8 compatibility mode, try the 32bits version or if you have the license install a later version of Modelsim SE.
Good luck,
Hans.
This thread is a bit old, but I've encountered the same issue and I think that I've found a way to solve it.
In my case another program was blocking the install (Skype/lync). After closing it the installation wizard kicked in as it was supposed to do.
To find the program that was causing the issue I used the new option added to the task manager called "Analize wait chain" and eventually got to lync.
I'm attempting to install Java 8 JRE on Window 10, and it's failing. The purpose of this is so that I can install SQLWorkbenchJ on my Windows machine. This is my personal machine, and I have complete access privileges. Please let me know if I can provide any additional information to answer this question (e.g., logs).
I've downloaded Java 8 from Oracle, specifically the offline 64 bit version for windows. When I download it, it places the following icon on my desktop:
When I double click on this icon, the following image pops up:
After I click "Yes" and the popup box disappears, nothing happens. Windows continues operating as if nothing happened. The only trace of activity is in the task manager, which shows the following:
Does anyone have any suggestions on how to fix this? I'm at a loss for how to push the installation process forward.
Update: I was able to solve this issue by installing the x86 version (32 bit) instead. I'm not sure why the x64 version doesn't work on Windows 10, but I'd seen this solution subtly referred to elsewhere on the internet as a solution. Would be interesting if someone could figure out why the x64 version itself doesn't work.
We have two concerns here - 1. JRE 8u101 (64-bit) fails to install without an error message and 2. JRE 8u101 (64-bit) fails to install on Windows 10.
The first one seems similar to http://bugs.java.com/view_bug.do?bug_id=8148167 which is a known issue.
However, it would be appropriate to take a look at jusched and JavaDeploy log files to confirm the same.
The second concerns with 64-bit JRE installation in Windows
Microsoft Edge on Windows 10 is not supported a supported browser.
For Internet Explorer 11 on Windows 10, see:
Related bug ID: http://bugs.java.com/view_bug.do?bug_id=8162523
For a solution related to 64-bit installation, suggest you to follow the instructions from the comment in the above bug report.
Hope this helps.
This is known issue https://bugs.openjdk.java.net/browse/JDK-8148167 , this has already fixed in 8u111/8u112, early access builds are available here - https://jdk8.java.net/download.html, you can download and try to install the same. Do let us know your feedback?
I was having this issue as well and the 8u112 worked from this page
Thank you
Hi！I had run a freeswitch for a callcenter ivr service.
During this time, freeswitch crash twice for the similar reasons below:
freeswitch[39310]: segfault at 7f556d514638 ip 00007f55dd909dc6 sp
00007f556d514640 error 6 in libspeexdsp.so.1.5.0[7f55dd8ff000+12000]
Dec 6 17:37:08 calltest kernel: freeswitch[19590]: segfault at
7f96ca9c8b18 ip 00007f96cb3b4dc6 sp 00007f96ca9c8b20 error 6 in
libspeexdsp.so.1.5.0[7f96cb3aa000+12000]
OS version: CentOS release 6.6 (Final)
freeswitch version: FreeSWITCH Version 1.4.19~64bit (64bit)
How can I find out what happen to freeswitch, and fixed the problem?
Thank you for your time.
you need to upgrade FreeSWITCH to the latest version, and open a Jira ticket if the problem persists. You will need to attach as much as possible logs and information to the ticket, so that it's possible to analyze and maybe reproduce.
Also the best would be to migrate to FreeSWITCH version 1.6, as most of development is happening there, and the bugs get fixed faster.
I recently installed Idea IntelliJ 10.0.3 on my Mac Snow Leopard. Whenever I try opening a project, IntelliJ starts indexing and in the process crashes!! It happens everytime.
I have Java 1.6.0_15 on my machine. I am not sure if this happens due to specific version of Java or due to a problem with my settings on IntelliJ.
Anybody experienced this before? Any fixes?
JDK 1.6.0_15 is known to crash because of GC bug, installing Apple Java Update is known to resolve this problem (current version is 1.6.0_26). Hardware problem mentioned by #xbit is also possible, but less likely.
I had this issue as well. It turned out to be bad memory in my case. Run Memtest if you are experiencing frequent crashes. Turn computer off, then hold down Command-S while turning on. This will boot you to single user mode. Then run "memtest all 2".