Is there a way to composer require some/thing without actually pulling the package? In my workflow, it would hasten things if I knew a command to just check version requirements and update composer.json without actually doing anything with regard to the vendor directory.
You can use --no-update switch to avoid updating and installing new dependencies - it will only add new dependency to composer.json.
composer require --no-update symfony/symfony
But since require does not check if required package can be installed (it always pick the newest version compatible with your PHP as a constraint, without checking if it will be possible to install), this can leave composer.json in non-installable state.
It will also not update composer.lock so composer install may ignore your new dependency. So this is probably a bad idea unless you want to do something with it before you commit new composer.json.
You may try to use --dry-run switch to test what will happen after composer update - you will be able to check if composer.json is installable, but composer.lock still will be out of date.
composer update --dry-run
Related
I've used following command to remove a package using composer.
composer remove sjparkinson/static-review
Above command removes entry from composer.json file but composer.lock file still contains entry for mentioned library in require section.
What is the proper way to update composer.lock ? Should I update it manually?
Composer does not removing this package, because it is required by another dependency. So even if you don't require it directly, it is still required by your project, so you cannot remove it. You can use composer why some-vendor/some-package command to check what is the reason to keep this package installed:
composer why sjparkinson/static-review
magento/product-community-edition 2.2.4 requires sjparkinson/static-review (~4.1)
If you really want to remove this package, you need to remove magento/product-community-edition too (and every dependency, which depends on this package).
BTW: Editing composer.lock manually is really bad idea, you should never do that.
I've currently installed a package "watson/sitemap". Now, I want to remove it without using "composer update" since it will update other packages which I don't want.
Any help would be much appreciated.
UPDATE: Composer 2 is now out, and it seems to be smart enough to handle the recursion. You need only remove the offending package.
I recently needed to do this. Here's a real-world example. This is pretty hacky. You could script this by using Composer's PHP classes or by parsing the composer.lock file, but this is a manual process you can follow.
1. Remove the unwanted package(s)
composer remove --no-update illuminate/mail
composer update illuminate/mail
2. Look for orphaned dependencies
composer show -N | xargs -n 1 composer why | grep "There is no installed package"
Output (something like this):
There is no installed package depending on "erusev/parsedown"
There is no installed package depending on "swiftmailer/swiftmailer"
There is no installed package depending on "tijsverkoyen/css-to-inline-styles"
3. Remove orphaned dependencies
composer update erusev/parsedown swiftmailer/swiftmailer tijsverkoyen/css-to-inline-styles
4. Rinse, repeat
Repeat steps 2 and 3 until you've found all the orphans.
Clarification: If you use the --no-update flag, you won't upgrade packages... however (as of writing, early 2020) it also does not remove orphaned dependencies. You're not telling it not to "upgrade". You're telling it not to update any of the installed (composer.lock) dependencies. Big difference. This is why you have to find them and manually "update" them out of your project.
Right way:
composer remove watson/sitemap --no-update
From CLI Docs:
The remove command removes packages from the composer.json file from
the current directory.
php composer.phar remove vendor/package vendor/package2
After removing the requirements, the modified requirements will be
uninstalled.
Hack way:
Remove the entry from composer.json then run
composer update watson/sitemap
This will remove a package totally from composer.lock and /vendor
I'm not sure this is possible. To restate your question. You have watson/sitemap in your composer.json, you've executed a composer update to download the package and it's dependencies. Now you want to remove the package but leave dependent packages in place?
I'm not sure there's a good way to do this, you'll have to run composer update at some point, which will just download it again. If my interpretation is correct, maybe your solution is to just add the other packages that you need that you don't want removed when you get rid of watson/sitemap, possibly sloppy/paste it's dependencies into your composer.json file?
I use
composer remove package-name --no-update-with-dependencies
Works imho
I added a package in the require block of my composer.json.
I do a composer install and it says Nothing to install or update.
In my understanding, composer update would work but I shouldn't do that because it updates the versions of the other packages to the latest, but I haven't tested my code on them.
How do I install that new package?
The Command Line.
You don't have to add the new packages manually to your composer.json file and then do a composer install or update. Use The Command Line
Installing new packages from the command line automatically adds it to your composer.json file and it does not update previously installed packages.
From the project root, simply run:
composer require package/name
Hope it helps
For future readers, if you have already added package(s) to your require block in composer.json, it's as simple as listing them all after the update command to exclude existing packages from being updated. First, simulate update to ensure you're happy with the result:
composer update --dry-run vendor/project vendor2/project2
If okay, run it again with the --dry-run argument removed.
You can see the output of updating new/specific packages is different from that of:
composer update --dry-run
Your composer.lock file should be on version control or otherwise backed up so you can restore it & revert all packages in the event of failure.
Using composer require will also update other dependencies.
We can install a new package without updating anything else like this:
composer require package/name --no-update
this will add your package to composer.json, leaving composer.lock intact.
composer update package/name
this will now install/update your new package, adding it to composer.lock. This will not update any other dependencies.
Here is the definitions from the docs:
The require command adds new packages to the composer.json file from
the current directory. If no file exists one will be created on the
fly. After adding/changing the requirements, the modified requirements
will be installed or updated.
If you do not want to choose requirements interactively, you can just
pass them to the command.
I can't seem to understand the purpose of the require command and the difference from install. Can you elaborate on that?
And here is the example of using the command:
composer global require "fxp/composer-asset-plugin:~1.0.3"
Can you tell me what's the difference from:
composer global install "fxp/composer-asset-plugin:~1.0.3"
It's just a convention. There might be some fallbacks in other commands for common people missuses, but every command is optimized for a different feature. It's just better user experience.
Same goes for similarity of composer install and composer update.
As for conventions, in order of common workflow:
composer install is for installing all packages of new application (all mentioned in composer.json), use: composer install
composer require is for adding a new package, use: composer require symfony/symfony
composer update is for updating current dependencies, use: composer update
composer require->It will write the modules in composer.json file and install the module.
composer install->It will install the modules which are already present in the composer.json file.
I have a project with a few dependencies and I'd like to install another one, but I'd like to keep the others the way they are. So I've edited the composer.json, but if I run composer install, I get the following output:
Installing dependencies from lock file
Warning: The lock file is not up to date with the latest changes in composer.json. You may be getting outdated dependencies. Run update to update them.
Your requirements could not be resolved to an installable set of packages.
Problem 1
- laravel/framework dev-master requires ext-mcrypt * -> the requested PHP extension mcrypt is missing from your system.
- laravel/framework dev-master requires ext-mcrypt * -> the requested PHP extension mcrypt is missing from your system.
- Installation request for laravel/framework dev-master -> satisfiable by laravel/framework dev-master.
First of all, I do have mcrypt installed, so I don't know why it's complaining about that there.
So, how can I install this new dependency?
My composer.json:
{
"require": {
"opauth/opauth": "*",
"opauth/facebook": "*",
"opauth/google": "*",
"opauth/twitter": "*",
"imagine/Imagine": "dev-develop",
"laravel/framework": "4.*",
"loic-sharma/profiler": "dev-master"
},
"autoload": {
"classmap": [
"app/libraries",
"app/commands",
"app/controllers",
"app/models",
"app/database/migrations",
"app/tests/TestCase.php"
]
},
"minimum-stability": "dev"
}
To install a new package and only that, you have two options:
Using the require command, just run:
composer require new/package
Composer will guess the best version constraint to use, install the package, and add it to composer.lock.
You can also specify an explicit version constraint by running:
composer require new/package ~2.5
–OR–
Using the update command, add the new package manually to composer.json, then run:
composer update new/package
If Composer complains, stating "Your requirements could not be resolved to an installable set of packages.", you can resolve this by passing the flag --with-dependencies. This will whitelist all dependencies of the package you are trying to install/update (but none of your other dependencies).
Regarding the question asker's issues with Laravel and mcrypt: check that it's properly enabled in your CLI php.ini. If php -m doesn't list mcrypt then it's missing.
Important: Don't forget to specify new/package when using composer update! Omitting that argument will cause all dependencies, as well as composer.lock, to be updated.
Actually, the correct solution is:
composer require vendor/package
Taken from the CLI documentation for Composer:
The require command adds new packages to the composer.json file from the current directory.
php composer.phar require
After adding/changing the requirements, the modified requirements will be installed or updated.
If you do not want to choose requirements interactively, you can just pass them to the command.
php composer.phar require vendor/package:2.* vendor/package2:dev-master
While it is true that composer update installs new packages found in composer.json, it will also update the composer.lock file and any installed packages according to any fuzzy logic (> or * chars after the colons) found in composer.json! This can be avoided by using composer update vendor/package, but I wouldn't recommend making a habit of it, as you're one forgotten argument away from a potentially broken project…
Keep things sane and stick with composer require vendor/package for adding new dependencies! 😉
We can install a new package without updating other dependencies like this:
composer require package/name --no-update
this will add your package to composer.json (no update to composer.lock)
composer update package/name
this will now install/update your new package, adding it to composer.lock without updating other deps
My use case is simpler, and fits simply your title but not your further detail.
That is, I want to install a new package which is not yet in my composer.json without updating all the other packages.
The solution here is composer require x/y
In my case, I had a repo with:
requirements A,B,C,D in .json
but only A,B,C in the .lock
In the meantime, A,B,C had newer versions with respect when the lock was generated.
For some reason, I deleted the "vendors" and wanted to do a composer install and failed with the message:
Warning: The lock file is not up to date with the latest changes in composer.json.
You may be getting outdated dependencies. Run update to update them.
Your requirements could not be resolved to an installable set of packages.
I tried to run the solution from Seldaek issuing a composer update vendorD/libraryD but composer insisted to update more things, so .lock had too changes seen my my git tool.
The solution I used was:
Delete all the vendors dir.
Temporarily remove the requirement VendorD/LibraryD from the .json.
run composer install.
Then delete the file .json and checkout it again from the repo (equivalent to re-adding the file, but avoiding potential whitespace changes).
Then run Seldaek's solution composer update vendorD/libraryD
It did install the library, but in addition, git diff showed me that in the .lock only the new things were added without editing the other ones.
(Thnx Seldaek for the pointer ;) )