I tried to install autokeras on aws ec2 (p2.xlarge) with the environment python 3.6 & tensorflow. I get following error after "pip install autokeras":
tensorflow 1.10.0 has requirement numpy<=1.14.5,>=1.13.3, but you'll have numpy 1.15.4 which is incompatible.
Installing collected packages: imageio, autokeras
Found existing installation: imageio 2.3.0
Cannot uninstall 'imageio'. It is a distutils installed project and thus we cannot accurately determine which files belong to it which would lead to only a partial uninstall.
I uninstalled numpy 1.15.4 and installed numpy 1.14.5. With "conda list", I can see the numpy has the correct version.
But after "pip install autokeras" I get the same error and numpy 1.15.4 is still there.
Has anyone successfully installed autokeras on aws ec2? What shall I do to install autokeras correctly?
(Maybe the 'imageio' is the next problem?)
Thank you!
I think you need tensorflow 1.14. Here my notes for AutoKeras installation:
Autokeras Installation Notes in the Deep Learning AMI:
We launched a new deep learning AMI with ubuntu.
The deep learning AMI didn't worked using the "tensorflow + keras + py3.6" environment (so no need for a DL AMI probably, you can save space on disk using a normal clean AMI), so we managed o install autokeras doing the following:
Create a new environment with Anaconda: $ conda create -n autokeras python=3.6.
1.1. Remember that only python 3.6 is working with autokeras
Activate virtual env: It didn't work $ conda activate autokeras, but it works using $ source activate autokeras.
installation of all the packages as required by pyimagesearch.
3.1. A new problem arised here, which, long story short, was solved using the next post (note that I chenged the order, since urllib3 needs jsonschema to be installed first):
$ pip uninstall urllib3```
$ pip uninstall jsonschema
$ pip install jsonschema==2.6.0
$ pip install urllib3==1.24.1
3.2. Finally I was able to install all 3 packages:
$ pip install tensorflow # or tensorflow-gpu
$ pip install keras
$ pip install autokeras
3.3. Autokeras worked fine at this point, but it raised a warning:
>>> import autokeras
Better speed can be achieved with apex installed from https://www.github.com/nvidia/apex
So I just went to the webpage and followed the installation steps. Now it works without warnings (so far):
$ git clone https://github.com/NVIDIA/apex
$ cd apex
$ pip install -v --no-cache-dir --global-option="--pyprof" --global-option="--cpp_ext" --global-option="--cuda_ext" ./
I can not find a solution to install tensorflow on anaconda/mac.
When i try: conda install tensorflow,
I get:
UnsatisfiableError: The following specifications were found to be in conflict:
- blaze -> numba -> numpy=1.13
- tensorflow
Use "conda info " to see the dependencies for each package.
I tried reinstalling numpy, and could not find any relevant documentation.
On mac use following command:
conda install -c conda-forge tensorflow
This will install the latest Tensorflow on your system. if you wish to upgrade it to newer version then you can use the following command
conda update -f -c conda-forge tensorflow
I have had success installing tensorflow through pip...
pip install tensorflow
or, if you have all of the proper libraries...
pip install tensorflow-gpu
But if you have already removed numpy form the anaconda install, you might be in for a long day because almost all of the numeric packages require it. If the above pip install doesn't work, you might want to start from a clean anaconda install.
I have installed tensorflow using -
pip install tensorflow
Or, you can use Anaconda in following way -
Open Anaconda Navigator
On Left side go to Environments
Create a new environment (eg :- tensorflow_tf), select python 3.7
then select Not installed and Search "tensorflow"
click on tensorflow and apply
This question is for a Windows 10 laptop. I'm currently trying to install tensorflow, however, when I run:
pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-1.0.0-cp35-cp35m-win_x86_64.whl
I get the following error:
tensorflow-1.0.0-cp35-cp35m-win_x86_64.whl is not a supported wheel on this platform.
I am trying to install the cpu-version only of tensorflow in an Anaconda 4.3.0 version. I had python 3.6.0 and then I downgraded to 3.5.0, none of them worked.
I also had same problem when I installed anaconda 4.3 version
Here is my solution.
Instead of using Anaconda3 4.3, install Anaconda3 4.2(Anaconda3-4.2.0-Windows-x86_64.exe)
Type on command line(If you are using GPU version)
pip install -U --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-1.0.0-cp35-cp35m-win_amd64.whl
Typeon command line(If you are using CPU only)
pip install -U --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-1.0.0-cp35-cp35m-win_amd64.whl
I'm working on win10 with python version=3.5.2, 64 bit
You can use same version of anaconda and execute this command
conda create -n tensorflow python=3.5
activate tensorflow
pip install tensorflow-gpu
It worked for conda 4.0.8
So are you sure you correctly downgraded your python? Run this command on command line pip -V. This should print the pip version and the python version.
Inside your Anaconda environment, try running this:
pip install --upgrade tensorflow
This will do the job. The issue was discussed here also.
Here is the screenshot of how this helped me:
If you have python3 on Windows insatalled, you can use the following command(non GPU):
pip install --upgrade https://storage.googleapis.com/tensorflow/mac/cpu/tensorflow-0.10.0-py3-none-any.whl
Worked for me.
when I try to install TensorFlow by cloning from Git, I run into the error "no module named copyreg," so I tried installing using a virtualenv. However, I then run into this error:
pip install https://storage.googleapis.com/tensorflow/mac/tensorflow-0.5.0-py2-none-any.whl
tensorflow-0.5.0-py2-none-any.whl is not a supported wheel on this platform.
I don't see this under the common problems section.
I am using OS X v10.10.5 (Yosemite) and Python 3.4.3, but I also have Python 2.7 (I am unsure if pip differentiates between these or how to switch between them).
I too got the same problem.
I downloaded get-pip.py from https://bootstrap.pypa.io/get-pip.py and then ran python2.7 get-pip.py for installing pip2.7.
And then ran the pip install command with python2.7 as follows.
For Ubuntu/Linux:
python2.7 -m pip install https://storage.googleapis.com/tensorflow/linux/cpu/tensorflow-0.5.0-cp27-none-linux_x86_64.whl
For Mac OS X:
python2.7 -m pip install https://storage.googleapis.com/tensorflow/mac/tensorflow-0.5.0-py2-none-any.whl
This should work just fine as it did for me :)
I followed these instructions from here.
After activating the virtualenv, be sure to upgrade pip to the latest version.
(your_virtual_env)$ pip install --upgrade pip
And now you'll be able to install TensorFlow correctly (for Linux):
(your_virtual_env)$ pip install --upgrade https://storage.googleapis.com/tensorflow/linux/cpu/tensorflow-0.7.0-py2-none-linux_x86_64.whl
I was trying to do the Windows-based install and kept getting this error.
It turns out you have to have Python 3.5.2. Not 2.7, not 3.6.x-- nothing other than 3.5.2.
After installing Python 3.5.2, the pip install worked.
Make sure that the wheel is, well, supported by your platform. Pip uses the wheel's filename to determine compatibility. The format is:
tensorflow-{version}-{python version}-none-{your platform}.whl
I didn't realize that x86_64 refers to x64, I thought it meant either x86 or x64, so I banged my head against this futilely for some time. TensorFlow is not available for 32-bit systems, unless you want to compile it yourself.
It seems that TensorFlow only works on Python 3.5 at the moment. Try to run this command before running the pip install
conda create --name tensorflow python=3.5
After this, run the following lines:
For CPU:
pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-1.1.0-cp35-cp35m-win_amd64.whl
For GPU:
pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/windows/gpu/tensorflow_gpu-1.1.0-cp35-cp35m-win_amd64.whl
It should work like a charm.
On Windows 10, with Python 3.6.X version I was facing the same. Then after checking deliberately, I noticed I had Python-32 bit installation on my 64-bit machine. Remember TensorFlow is only compatible with a 64-bit installation of Python. Not 32 bit of Python
If we download Python from python.org, the default installation would be 32 bit. So we have to download the 64 bit installer manually to install Python 64 bit. And then add
C:\Users<username>\AppData\Local\Programs\Python\Python36
C:\Users<username>\AppData\Local\Programs\Python\Python36\Scripts
Then run gpupdate /Force on the command prompt. If the Python command doesn’t work for 64 bit, restart your machine.
Then run the Python interpreter on the command prompt. It should show 64 bit
python
Python 3.6.3 (v3.6.3:2c5fed8, Oct 3 2017, 18:11:49) [MSC v.1900 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
Then run the below command to install the TensorFlow CPU version (recommended)
pip3 install --upgrade tensorflow
The pip wheel file contains the Python version in its name (cp34-cp34m). If you download the .whl file and rename it to say py3-none or instead, it should work. Can you try that?
The installation won't work for Anaconda users that choose Python 3 support, because the installation procedure is asking to create a Python 3.5 environment and the file is currently called cp34-cp34m. So renaming it would do the job for now.
sudo pip3 install --upgrade https://storage.googleapis.com/tensorflow/linux/gpu/tensorflow-0.7.0-cp34-cp34m-linux_x86_64.whl
This will produce the exact error message you got above. However, when you will download the file yourself and rename it to "tensorflow-0.7.0-py3-none-linux_x86_64.whl", then execute the command again with the changed filename, it should work fine.
For Windows 10 64 bit:
I have tried all the suggestions here, but finally I got it running as follows:
Uninstall all current versions of Python
Remove all Python references in the PATH system and user environment variables
Download the latest 64-bit version of Python 3.8: Python 3.8.7 currently, not the latest 3.9.x version which is the one I was using, and not 32 bit.
Install with all options selected, including pip, and including the PATH environment variable
pip install tensorflow (in an administrator CMD prompt)
Upgrade pip if prompted (optional)
Actually, you can use Python 3.5.*.
I successfully solved this problem with Python 3.5.3. Modify the Python version to 3.5.* in Conda. See Managing Python.
Then go to https://www.tensorflow.org/install/install_windows, and repeat from "Create a Conda environment named tensorflow by invoking the following command" bla, bla...
Maybe you are installing the wrong pre-build binary?
Check on https://github.com/lakshayg/tensorflow-build
For my Coffee Lake processor on Ubuntu 18.04 (Bionic Beaver) the download URL was:
https://github.com/lakshayg/tensorflow-build/releases/download/tf1.12.0-ubuntu18.04-py2-py3/tensorflow-1.12.0-cp36-cp36m-linux_x86_64.whl
pip install --ignore-installed --upgrade <PATH>
resolved the issue for me.
I was trying to install from source and got that error. (Why would a wheel built on this machine not be compatible with it?)
For me, the tag --ignore-installed made all the difference.
pip install --ignore-installed /tmp/tensorflow_pkg/tensorflow-1.8.0-cp36-cp36m-linux_x86_64.whl
worked, while
pip install /tmp/tensorflow_pkg/tensorflow-1.8.0-cp36-cp36m-linux_x86_64.whl
threw the abovementioned error.
Context: Conda environment; it might have been a problem specific to this
I was trying to install CPU TensorFlow on Ubuntu 18.04 (Bionic Beaver), and the best way (for me...) I found for it was using it on top of Conda, for that:
To create a Conda ‘tensorflow’ environment. Follow How to Install Anaconda on Ubuntu 18.04
After all is installed, see Getting started with conda. And use it according to Managing environments
conda create --name tensorflow
source activate tensorflow
pip install --upgrade pip
pip uninstall tensorflow
For CPU: pip install tensorflow-cpu, for GPU: pip install tensorflow
pip install --ignore-installed --upgrade tensorflow
Test TF E.g. on 'Where' with:
python
import tensorflow as tf
>>> tf.where([[True, False], [False, True]])
Expected result:
<tf.Tensor: shape=(2, 2), dtype=int64, numpy=
array([[0, 0],
[1, 1]])>
After the Conda upgrade, I got:
DeprecationWarning: 'source deactivate' is deprecated. Use 'conda deactivate'.
So you should use:
‘conda activate tensorflow’ / ‘conda deactivate’
I faced the same issue and tried all the solutions that folks suggested here and other links (like Platform not supported for TensorFlow on Ubuntu 14.04.2).
It was so frustrating because using print(wheel.pep425tags.get_supported()) I could see that my Ubuntu supported ('cp37', 'cp37m', 'linux_x86_64') and that was exactly what I was trying to install (from https://storage.googleapis.com/tensorflow/linux/cpu/tensorflow-1.14.0-cp37-cp37m-linux_x86_64.whl).
What at the end fixed it was to simply download the package first and then
pip install tensorflow-1.14.0-cp37-cp37m-linux_x86_64.whl
It means that the version of your default Python interpreter (python -V) and the version of your default pip (pip -V) do not match. You have built TensorFlow with your default Python interpreter and trying to use a different pip version to install it.
In Mac, delete /usr/local/bin/pip and rename (copy) pipx.y (whatever x.y version that matches your Python version) to pip in that folder.
This worked for me.
system requirement Python 3.7–3.10
macOS 10.12.6 (Sierra) or later (no GPU support)
pip install tensorflow-macos
I'm attempting to install ipython on a CentOS 6.5 box using pip, but I get an error because it is attempting to use python 2.6 instead of 2.7.
By default, I'm running python 2.6
$ python -V
Python 2.6.6
Which is located in /usr/bin/python
$ which python
/usr/bin/python
I've also installed python 2.7 and it is located in usr/local/bin/
$ which python2.7
/usr/local/bin/python2.7
I would like to install the latest version of ipython, and I'm using pip to do this.
$ sudo pip install ipython
Downloading/unpacking ipython
Downloading ipython-2.2.0.tar.gz (11.9MB): 11.9MB downloaded
Running setup.py (path:/tmp/pip_build_root/ipython/setup.py) egg_info for package ipython
ERROR: IPython requires Python version 2.7 or 3.3 or above.
Complete output from command python setup.py egg_info:
ERROR: IPython requires Python version 2.7 or 3.3 or above.
I can see that the setup.py script for ipython is determining the active version here:
v = sys.version_info
if v[:2] < (2,7) or (v[0] >= 3 and v[:2] < (3,3)):
error = "ERROR: IPython requires Python version 2.7 or 3.3 or above."
print(error, file=sys.stderr)
sys.exit(1)
PY3 = (sys.version_info[0] >= 3)
How can I override the version that pip is assessing by default? Should I make a symbolic link to the python 2.7 in /usr/local/bin? Simply updating my bash profile with an alias for python at /usr/local/bin/python2.7 does not do the trick. Thanks.
If you're using virtualenv, you can use the -p switch when creating the environment and it will understand you want that version of python:
virtualenv -p /usr/local/bin/python2.7 ~/.virtualenvs/venv
Will create a virtualenv venv under ~/.virtuenvs with /usr/local/bin/python2.7 copied to ~/.virtualenvs/venv/bin/python for the python interpreter. The line on top of all scripts is similarly going to be #~/.virtualenvs/venv/bin/python . If you still have problems, do leave a comment.