How can I extract a word that comes after a specific word in bash ? More precisely, I have a file which has a line which looks like this:
Demo.txt
IN=../files/d
out=../files/d
dataload
name
i want to read "d" from above line.
sed -n '/\/files\// s~.*/files/\([^.]*\)\..*~\1~p' file
this code helping if line having "."
IN=../files/d.txt
so its printing "d"
here we have "d" without "." as end delimeter. So i want to read till end of line.
i/p :
Demo.txt
IN=../files/d
out=../files/d
dataload
name
output looking for:
d
d
code: in bash
You could use GNU grep with PCRE :
grep -oP '/files/\K[^.]+' file
The -P flag makes grep use PCRE, the -o makes it display only the matched part rather than the full line, and the \K in the regex omits what precedes from the displayed matched part.
Alternatively if you don't have access to GNU grep, the following perl command will have the same effect :
perl -nle 'print $& if m{/files/\K[^.]+}' file
Sample run.
This sed variant should work for you:
sed -n '/\/files\// s~.*/files/\([^.]*\).*~\1~p' file
d
d
Minor change from earlier sed is that it doesn't match \. right after first capture group.
When you don't want to think about a single command solution, you can use
grep -Eo "/files/." Demo.txt | cut -d/ -f3
Related
I want to use grep in a bash script to get the line with only the word "version" from a file, the problem is that a few lines further down in the file that i want the script to look in there is another line with the word "dlversion".
I am piping the grep into a cut command, the output will be saved as a variable
The problem is that it either saves nothing into the variable or it saves both lines, I've already tried several methods that i found, though none of them have worked.
grep -Fx version /path/to/file.txt | cut -c9-
output = nothing
grep '^version$' /path/to/file.txt | cut -c9-
output = nothing
grep "version" /path/to/file.txt | cut -c9-
output = both lines
also tried
grep -w "version " /path/to/file.txt | cut -c9-
output = nothing
I also tried to use -F, -x on their own which also caused the variable to not have a value.
You have a few options, depending on your version of grep.
If supported, the best option is to use word boundaries \b either side of your word:
grep '\bversion\b' /path/to/file.txt
Or:
grep '\<version\>' /path/to/file.txt
Where \< and \> match the empty string at the start and end of a word respectively.
Otherwise, you can create your own set of characters that you consider to not be a word:
grep -E '(^|[[:space:][:punct:]])version' /path/to/file.txt
This matches "version", preceded by either the start of the line or any type of space or punctuation.
In your specific case, you could use something like this:
grep -E '(^|[^l])version' /path/to/file.txt
This matches "version" preceded by either the start of the line or anything other than an "l".
In response to your comment:
^ matches the start of the line.
| means "or".
[^l] is a bracket expression, where the ^ as the first character means "not" (so this matches every character other than "l").
The parentheses are used to create a group, so that the "or" only applies to this part of the pattern.
In case any sophisticated tricks fail, use the brute force: pipe the result through another grep process to filter out the lines with unwanted words (use -v option for that):
grep 'version' sourcefile | grep -v 'dlversion' > destination
The file is like this
aaa&123
bbb&234
ccc&345
aaa&456
aaa$567
bbb&678
I want to output:(contain "aaa" and text after &)
123
456
I want to do in in shell script,
Follow code be consider
#!/bin/bash
raw=$(grep 'aaa' 1.txt)
var=$(cut -f2 -d"&" "$raw")
echo $var
It give me a error like
cut: aaa&123
aaa&456
aaa$567: No such file or directory
How to fix it? and how to cut (or grep or other) from exist variables?
Many thanks!
With GNU grep:
grep -oP 'aaa&\K.*' file
Output:
123
456
\K: ignore everything before pattern matching and ignore pattern itself
From man grep:
-o, --only-matching
Print only the matched (non-empty) parts of a matching line,
with each such part on a separate output line.
-P, --perl-regexp
Interpret PATTERN as a Perl compatible regular expression (PCRE)
Cyrus has my vote. An awk alternative if GNU grep is not available:
awk -F'&' 'NF==2 && $1 ~ /aaa/ {print $2}' file
Using & as the field separator, for lines with 2 fields (i.e. & must be present) and the first field contains "aaa", print the 2nd field.
The error with your answer is that you are treating the grep output like a filename in the cut command. What you want is this:
grep 'aaa.*&' file | cut -d'&' -f2
The pattern means "aaa appears before an &"
I am in need to extract all characters after a pattern match.
For example ,
NAME=John
Age=16
I need to extract all characters after "=". Output should be like
John
16
I cant go with perl or Jython for this purpose because of some restrictions.
I tried with grep , but to my knowledge I came as shown below only
echo "NAME=John" |grep -o -P '=.{0,}'
You were pretty close:
grep -oP '(?<=\w=)\w+' file
makes it.
Explanation
it looks for any word after word= and prints it.
-o stands for "Print only the matched (non-empty) parts of a matching line, with each such part on a separate output line".
-P stands for "Interpret PATTERN as a Perl regular expression".
(?<=\w=)\w+ means: match only \w+ following word=. More info in [Regex tutorial - Lookahead][1] and in [this nice explanation by sudo_O][2].
Test
$ cat file
NAME=John
Age=16
$ grep -oP '(?<=\w=)\w+' file
John
16
One sed solution
sed -ne 's/.*=//gp' <filename>
another awk solution
awk -F= '$0=$2' <filename>
Explanation:
in sed we remove anything from the beginning of a line till a = and print the rest.
in awk we break the string in 2 parts, separated by =, now after that $0=$2 is making replacing the whole string with the second portion
I would like ignore all lines which occur before a match in bash (also ignoring the matched line. Example of input could be
R1-01.sql
R1-02.sql
R1-03.sql
R1-04.sql
R2-01.sql
R2-02.sql
R2-03.sql
and if I match R2-01.sql in this already sorted input I would like to get
R2-02.sql
R2-03.sql
Many ways possible. For example: assuming that your input is in list.txt
PATTERN="R2-01.sql"
sed "0,/$PATTERN/d" <list.txt
because, the 0,/pattern/ works only on GNU sed, (e.g. doesn't works on OS X), here is an tampered solution. ;)
PATTERN="R2-01.sql"
(echo "dummy-line-to-the-start" ; cat - ) < list.txt | sed "1,/$PATTERN/d"
This will add one dummy line to the start, so the real pattern must be on line the 1 or higher, so the 1,/pattern/ will works - deleting everything from the line 1 (dummy one) up to the pattern.
Or you can print lines after the pattern and delete the 1st, like:
sed -n '/pattern/,$p' < list.txt | sed '1d'
with awk, e.g.:
awk '/pattern/,0{if (!/pattern/)print}' < list.txt
or, my favorite use the next perl command:
perl -ne 'print unless 1../pattern/' < list.txt
deletes the 1.st line when the pattern is on 1st line...
another solution is reverse-delete-reverse
tail -r < list.txt | sed '/pattern/,$d' | tail -r
if you have the tac command use it instead of tail -r The interesant thing is than the /pattern/,$d' works on the last line but the1,/pattern/d` doesn't on the first.
How to ignore all lines before a match occurs in bash?
The question headline and your example don't quite match up.
Print all lines from "R2-01.sql" in sed:
sed -n '/R2-01.sql/,$p' input_file.txt
Where:
-n suppresses printing the pattern space to stdout
/ starts and ends the pattern to match (regular expression)
, separates the start of the range from the end
$ addresses the last line in the input
p echoes the pattern space in that range to stdout
input_file.txt is the input file
Print all lines after "R2-01.sql" in sed:
sed '1,/R2-01.sql/d' input_file.txt
1 addresses the first line of the input
, separates the start of the range from the end
/ starts and ends the pattern to match (regular expression)
$ addresses the last line in the input
d deletes the pattern space in that range
input_file.txt is the input file
Everything not deleted is echoed to stdout.
This is a little hacky, but it's easy to remember for quickly getting the output you need:
$ grep -A99999 $match $file
Obviously you need to pick a value for -A that's large enough to match all contents; if you use a too-small value the output will be silently truncated.
To ensure you get all output you can do:
$ grep -A$(wc -l $file) $match $file
Of course at that point you might be better off with the sed solutions, since they don't require two reads of the file.
And if you don't want the matching line itself, you can simply pipe this command into tail -n+1 to skip the first line of output.
awk -v pattern=R2-01.sql '
print_it {print}
$0 ~ pattern {print_it = 1}
'
you can do with this,but i think jomo666's answer was better.
sed -nr '/R2-01.sql/,${/R2-01/d;p}' <<END
R1-01.sql
R1-02.sql
R1-03.sql
R1-04.sql
R2-01.sql
R2-02.sql
R2-03.sql
END
Perl is another option:
perl -ne 'if ($f){print} elsif (/R2-01\.sql/){$f++}' sql
To pass in the regex as an argument, use -s to enable a simple argument parser
perl -sne 'if ($f){print} elsif (/$r/){$f++}' -- -r=R2-01\\.sql file
This can be accomplished with grep, by printing a large enough context following the $match. This example will output the first matching line followed by 999,999 lines of "context".
grep -A999999 $match $file
For added safety (in case the $match begins with a hyphen, say) you should use -e to force $match to be used as an expression.
grep -A999999 -e '$match' $file
[Editorial insertion: Possible duplicate of the same poster's earlier question?]
Hi, I need to extract from the file:
first
second
third
using the grep command, the following line:
second
third
How should the grep command look like?
Instead of grep, you can use pcregrep which supports multiline patterns
pcregrep -M 'second\nthird' file
-M allows the pattern to match more than one line.
Your question abstract "bash grep newline", implies that you would want to match on the second\nthird sequence of characters - i.e. something containing newline within it.
Since the grep works on "lines" and these two are different lines, you would not be able to match it this way.
So, I'd split it into several tasks:
you match the line that contains "second" and output the line that has matched and the subsequent line:
grep -A 1 "second" testfile
you translate every other newline into the sequence that is guaranteed not to occur in the input. I think the simplest way to do that would be using perl:
perl -npe '$x=1-$x; s/\n/##UnUsedSequence##/ if $x;'
you do a grep on these lines, this time searching for string ##UnUsedSequence##third:
grep "##UnUsedSequence##third"
you unwrap the unused sequences back into the newlines, sed might be the simplest:
sed -e 's/##UnUsedSequence##/\n'
So the resulting pipe command to do what you want would look like:
grep -A 1 "second" testfile | perl -npe '$x=1-$x; s/\n/##UnUsedSequence##/ if $x;' | grep "##UnUsedSequence##third" | sed -e 's/##UnUsedSequence##/\n/'
Not the most elegant by far, but should work. I'm curious to know of better approaches, though - there should be some.
I don't think grep is the way to go on this.
If you just want to strip the first line from any file (to generalize your question), I would use sed instead.
sed '1d' INPUT_FILE_NAME
This will send the contents of the file to standard output with the first line deleted.
Then you can redirect the standard output to another file to capture the results.
sed '1d' INPUT_FILE_NAME > OUTPUT_FILE_NAME
That should do it.
If you have to use grep and just don't want to display the line with first on it, then try this:
grep -v first INPUT_FILE_NAME
By passing the -v switch, you are telling grep to show you everything but the expression that you are passing. In effect show me everything but the line(s) with first in them.
However, the downside is that a file with multiple first's in it will not show those other lines either and may not be the behavior that you are expecting.
To shunt the results into a new file, try this:
grep -v first INPUT_FILE_NAME > OUTPUT_FILE_NAME
Hope this helps.
I don't really understand what do you want to match. I would not use grep, but one of the following:
tail -2 file # to get last two lines
head -n +2 file # to get all but first line
sed -e '2,3p;d' file # to get lines from second to third
(not sure how standard it is, it works in GNU tools for sure)
So you just don't want the line containing "first"? -v inverts the grep results.
$ echo -e "first\nsecond\nthird\n" | grep -v first
second
third
Line? Or lines?
Try
grep -E -e '(second|third)' filename
Edit: grep is line oriented. you're going to have to use either Perl, sed or awk to perform the pattern match across lines.
BTW -E tell grep that the regexp is extended RE.
grep -A1 "second" | grep -B1 "third" works nicely, and if you have multiple matches it will even get rid of the original -- match delimiter
grep -E '(second|third)' /path/to/file
egrep -w 'second|third' /path/to/file
you could use
$ grep -1 third filename
this will print a string with match and one string before and after. Since "third" is in the last string you get last two strings.
I like notnoop's answer, but building on AndrewY's answer (which is better for those without pcregrep, but way too complicated), you can just do:
RESULT=`grep -A1 -s -m1 '^\s*second\s*$' file | grep -s -B1 -m1 '^\s*third\s*$'`
grep -v '^first' filename
Where the -v flag inverts the match.