So I am using rbenv to set my ruby version (for the specific project I'm working on this is 2.1.1). The issue is that bundler is unable to detect this change. I even tried to set the version in my gemfile:
source "https://my-proxy-address"
ruby "2.1.1"
gem 'fileutils'
gem 'json'
gem 'chef-api'
However this then causes the exact error message as seen here at the end of the tutorial:
username#hostname:~/Desktop/working-bundler-env$ rbenv version
2.1.1 (set by /Users/username/.rbenv/version)
username#hostname:~/Desktop/working-bundler-env$ ruby -v
ruby 2.1.1p76 (2014-02-24 revision 45161) [x86_64-darwin15.0]
username#hostname:~/Desktop/working-bundler-env$ bundle install
Your Ruby version is 2.0.0, but your Gemfile specified 2.1.1
The tutorial has the solution to the issue (edit a pathfile), however they dont say what file to change. What file do I change?
$ rbenv
rbenv 1.0.0
Usage: rbenv <command> [<args>]
Some useful rbenv commands are:
commands List all available rbenv commands
local Set or show the local application-specific Ruby version
global Set or show the global Ruby version
shell Set or show the shell-specific Ruby version
install Install a Ruby version using ruby-build
uninstall Uninstall a specific Ruby version
rehash Rehash rbenv shims (run this after installing executables)
version Show the current Ruby version and its origin
versions List all Ruby versions available to rbenv
which Display the full path to an executable
whence List all Ruby versions that contain the given executable
See `rbenv help <command>' for information on a specific command.
For full documentation, see: https://github.com/rbenv/rbenv#readme
$ which bundle
/usr/local/bin/bundle
So I noticed that when I ran gem bundle install the version was 1.13.3. After running sudo find / -name bundle I found two file locations that included that version number.
/Users/myusername/.gems/gems/bundler-1.13.3/exe/bundle
/Users/myusername/.gems/gems/bundler-1.13.3/lib/bundler/man/bundle
After attempting to run /Users/myusername/.gems/gems/bundler-1.13.3/exe/bundle install it works perfectly. So I just made an alias in my ~/.bash_profile that overwrote the incorrect bundle command.
alias bundle=/Users/alexcohen/.gems/gems/bundler-1.13.3/exe/bundle
The only side effect of this gem (for better or worse) is that it creates .bundle and path directories in the directory where I run bundle install where the gems are downloaded into.
I still have to investigate why this is happening, but I think that the bundle command in my macs terminal was referencing some type of broken bundler gem or file somewhere in my system.
I have two scripts which require the same version of Ruby. However, each script also requires a DIFFERENT version of a gem (nokogiri). One of the scripts will run with both versions of nokogiri (1.6.2.1 and 1.6.1). However the other script will ONLY run with version 1.6.1; and if 1.6.2.1 is installed, the script will not execute normally.
I know how to install multiple versions of Ruby with rbenv. But is it possible to install multiple instances of the SAME version of Ruby (2.1.2)? If so, how?
Make a local copy of a ruby-installer definition file using a custom name.
$ cp ~/.rbenv/plugins/ruby-build/share/ruby-build/2.1.5 2.1.5-nokogiri161
Install this as a custom definition file, no edits required.
$ rbenv install ./2.1.5-nokogiri161
Now you have a ruby version with a custom name and you can install custom gems on it.
$ rbenv shell 2.1.5-nokogiri161
$ gem install nokogiri -v 1.6.1
This is also useful for installing ruby versions with custom build flags. For example, a debug build with no compiler optimizations.
$ cp ~/.rbenv/plugins/ruby-build/share/ruby-build/2.1.5 2.1.5-debug
$ RUBY_CONFIGURE_OPTS="optflags=-O0" rbenv install ./2.1.5-debug
$ rbenv shell 2.1.5-debug
1) Use rvm instead of rbenv, and using it feature called 'gemsets' you could use different versions of gems for one version of ruby
rvm 2.1.1
rvm gemset create first second
rvm 2.1.1#first
gem install nokogiri -v 1.6.1
rvm 2.1.1#second
gem install nokogiri -v 1.6.2
2) or you can use bundler
gem install bundler
/dir_1/Gemfile
source 'http://rubygems.org'
gem 'nokogiri', '1.6.1'
/dir_2/Gemfile
source 'http://rubygems.org'
gem 'nokogiri', '1.6.2'
I see two options:
You could have different Gemfiles and let bundler take care of setting the right gem-version. If the scripts are in different directories, it should be no problem.
You could use rbenv-gemset to have separate gem-environments
There are undoubtly more, but those two seem the easiest for your setup.
Multiple instances of the same ruby is possible (regardless of the tool installing them) by just compiling them manually, with a different --prefix configured.
download the source
extract it
./configure --prefix=~/.rbenv/version/2.1.2-tSquirrel
make
sudo make install
This is how the rbenv-docs propose to achieve this.
You could also rename the current "2.1.2"-directory and then use ruby-build to install 2.1.2 again.
"Versions" in rbenv are just directories in ~/.rbenv/versions, I would guess you cold just rename/copy installed version and when you "select" version with "rbenv shell" you just declare from which directory you want to use binaries.
When I try to bundle install I get the following message:
Your Ruby version is 2.0.0, but your Gemfile specified 2.1.0
In my Gemfile I have the following:
ruby '2.1.0'
And when I run ruby -v in the console I get:
ruby 2.1.0p0 (2013-12-25 revision 44422) [x86_64-darwin12.0]
What does Ruby 2.1.0p0 mean? What version should I have in my Gemfile and why does the error tell me I have Ruby version 2.0.0?
Run
gem install bundler
or
gem update bundler
which may fix your problem.
For all new installed versions of Ruby you should update or install a new bundler.
In the top-level directory of your project, create a file named .ruby-version containing (wait for it...)
2.1.0
That apparently is the cross-{rbenv,rvm} way of spec'ing the version now.
For me, none of the answers helped. I fixed it closing and opening again the terminal.
If you get this in a Rails project, and you recently upgraded your Ruby version you might have spring still running with the old version of Ruby.
./bin/spring stop
will fix this.
None of the other suggestions was working for me. On the server, I had to do:
rvm --default use [correct version number]
brew cleanup ruby worked for me as I use HomeBrew to install Ruby.
I recently updated Ruby through HomeBrew but HomeBrew did not remove the older version. brew cleanup ruby will delete the older version of Ruby.
the main reason for this problem is your machine and gemfile using a different ruby version
so there is multiple problems and solutions for this issue you can try the below solutions one by one
1- make sure your machine install and use the same version of your gemfile if your machine not using the same one try to install this version using rvm
$ rvm install ruby_version_you_want
make sure the version installed success by using this command
$ rvm list
and if the new version doesn't set as a default you can set it using this command
$ rvm --default use ruby_version_you_want
you can check the current ruby version
$ rvm current
$ ruby -v
2- if you have the same issue check your bundler
$ gem install bundler
or
$ gem update bundler
3- in some cases spring still using the old version so you need to stop it
$ ./bin/spring stop
4- another case you can type
$ gem pristine --all
and try to install bundle again
5- also in some cases after install the updated ruby version you just need to restart your terminal.
6- another solution but I didn't recommend it the top-level directory of your project, create a file named .ruby-version containing your active running ruby version
7- if you still have this problem try to remove ruby and install the updated version only
$ aptitude purge ruby
If you are using Capistrano you should also check your deploy.rb file for the set :rbenv_ruby configuration.
I got this after upgrading with ruby-install. Fixed this with:
gem install bundler
followed by:
$HOME/.rubies/ruby-2.4.1/bin/bundle
It shouldn't be necessary to specify the path as which bundle indicates it's already using this path. But it gives the version error if running bundle without the path. I don't know why?
Thanks for the info about installing / updating bundler but it didn't work for me.
I had to do rbenv rehash
If you are using rbenv to manage your ruby environments you can run rbenv local 2.1.0 within your project directory to set the version of ruby your gemfile asks for.
NONE of the above answers worked for me, but
$ gem pristine --all
did the trick for me
buona fortuna
I struggled with something very similar, just different versions. I finally fixed it by going to RubyGems and placing the latest version of bundler in my gemfile, which currently is:
gem 'bundler', '~> 2.1', '>= 2.1.4'
There was still an issue, but after that, I ran:
gem update --system
And it resolved the mixed-up versions of Ruby in the rails project folder. You may have to restart the terminal before you do this. Also, I commented out the bundler gem file, it appears the gem update --system command is what really resolved it.
I got it from here:
For more advanced projects .versions.conf is supported, where more than the Ruby version can be specified.
Generating .versions.conf:
rvm --create --versions-conf use 1.9.3#my_app
Example .versions.conf:
ruby=jruby-1.6.8
ruby-gemset=my_app
env-JRUBY_OPTS=--1.9
Make sure your server configuration points to the correct ruby installation.
I had already updated my Ruby version in the .ruby-version file and that didn't fix it. ruby -v also showed the correct version, but I had forgotten to update my server config.
For example, with rbenv, NGINX, and Pushion Passenger I had in my NGINX server block:
passenger_ruby /Users/myusername/.rbenv/versions/2.3.1/bin/ruby;
And I needed to change to...
passenger_ruby /Users/myusername/.rbenv/versions/2.3.3/bin/ruby;
Then restarted NGINX and it worked.
This could happen when you install new version of ruby and update .ruby-version and Gemfile to the new version without doing install all the gems for new version of ruby first. So do the
$ bundle install
and you might as well need to source .profile or restart your shell.
If you are using rbenv just run
rbenv local 2.0.0
Then
bundle install
I opened Gemfile and replaced 2.7.1 with my own version of ruby 2.7.0 Everything is okay right now.
Had the same problem and I'm working with rbenv
Those are the steps that helped me fix my problem:
First in terminal, type which bundle. For me this gave: /usr/local/bin/bundle
Again in terminal try which ruby. In my case this gave: /Users/Mahmoud/.rbenv/shims/ruby
The problem here thus is that bundle isn't using the same ruby version from rbenv. So the path needs fixing. In other words I need to tell my terminal to use the rbenv version of bundle when I use bundle install.
So step 3: For me I personally already had the path set in ~/.bash_profile:
export PATH="$HOME/.rbenv/shims:$PATH"
eval "$(rbenv init -)"
but apparently this was not enough as I was using zsh. Had to add those same 2 lines to ~/.zshrc as well.
Restart terminal
Now bundle install is working as expected and which bundle gives:
/Users/Mahmoud/.rbenv/shims/bundle
indicating that the problem was just that bundle was using the wrong ruby.
So if you have this problem, just make sure ~/.bash_profile and ~/.zshrc have the correct path by adding the 2 lines indicated above. If this didnt work take a deep dive into paths to make sure that before starting which bundle gives the equivalent of:
/Users/Mahmoud/.rbenv/shims/bundle
Had the same error. Doing the following fixed it. I was using ruby 2.5.5 and rbenv. Upgraded from 2.5.1.
rbenv rehash
gem uninstall bundler
gem install bundler
gem install bundler:1.17.3 (my app needed specific bundler -v 1.17.3)
gem install rails
I solved this problem by updating my ruby version to ruby '2.4.0'
Then bundle install
Simply closing the terminal I was working on and opening a new one worked for me. Sometimes, updates are not effected immediately until a session is closed. I have found this as the case with many rails errors I faced.
I clean and install with that:
sudo gem pristine --all
and install again:
bundle install
I face the error msg
Your Ruby version is 2.5.1, but your Gemfile specified 2.3.0
and solved by the following steps:
open Gemfile which located at your directory.
change ruby '2.3.0' to ruby '2.5.1' and save the Gemfile
go back to items and run bundle update.
the issue is perfectly solved.
I have just updated Ruby from version 1.9.3-p448 to 1.9.3-p484 using rbenv on a Ubuntu Production server. The updating seems to be successful. Ruby version shows the latest version I just updated.
However when I look at the gems for this version 1.9.3-p484 under the directory:
.rbenv/versions/1.9.3-p484/lib/ruby/gems/1.9.1/gems.
I only find a few gems in that directory. And when I looked at the directory of the previous version, there is a whole bunch of gems in there. Did I miss a step somewhere in the ruby update process?
Now that I am using the new ruby version, do I need to reinstall all the gems for this version? If so, will running bundle install does the job?
In short, yes. Since rbenv maintains a separate directory for each ruby installation, you'll need to run bundle again to install the gems for that ruby.
When you install a gem running under ruby 1.9.3-p448 for example, that gem will be installed only for that ruby. When you switch to another version of ruby, that gem will not be available for use until you install it.
Yes, you need to run bundle install for the active ruby version. Please make sure that the active ruby version, and the gemset for the application are set properly. Just do the following (in Linux/MacOS):
$ cat .ruby-version
ruby-1.9.3-p484
$ cat .ruby-gemset
your_app_name
And before gem update, please re-neter into the your application/gem folder.
$ cd ..
$ cd your_app_name
I have an additional note. If your application is a gem, there is no reason to add the .ruby-version, and .ruby-gemset files into the git repository, just add them into .gitignore file. When your application is a rails app, adding the files along with the Gemfile.lock into git repo has make sense, because you fix ruby version, and gem set for web-application to one that are those, which uniquely will work. Also some cloud services like heroku requires Gemfile.lock to be added into a git repo.
I installed Ruby and Rails via RVM, but using "gem install something", the console tries to install into /Library/Ruby/Gems/1.8 directory.
Do I still need this Ruby dir?
You are still using the default Ruby. You need to activate RVM for your shell session. See item 2 at the below:
http://beginrescueend.com/rvm/install/
(and no I wouldn't delete the original Ruby dir)
You have to direct your shell to use RVM and the Ruby version. You can do so by issuing the following command:
rvm use *ruby version (example: 1.8.7)*
Or, if you have created a gemset for particular project:
rvm use *ruby version (example: 1.8.7)*#*my_gem_set*