I have a view with a lot of UI buttons. I want some of the buttons to show and some to be hidden depending on my dynamic content. This can be done with button.isHidden = true. The problem is that the layout still set its constraints to the hidden buttons which create a lot of empty space.
You can see the empty space at the bottom in the picture where the buttons are hidden. So, is it possible to make the buttons "gone" instead of hidden? In Android Studio there is a isGone code (can't remember the exact code) that not only hides the button but removes the height and width of it as well.
Related
Desired look
I wish to make a toolbar for my app that will contain some simple buttons, each with a single monochromatic icon. Here is an example of some toolbar buttons similar to I'm trying to achieve, from Mail's compose window:
Notice these buttons have a consistent size, inner padding, padding, and shading. This is a pretty consistent style across macOS, present in Mail, Safari, Finder, etc. This leads me to suspect there's a standardized UI component for creating such buttons.
If I use a segmented control, each button looks correct, with each icon being correctly padded:
Now I would like to add individual buttons that match the style.
Attempt 1
My first attempt was to add a "Push Button" (NSButton) to the toolbar:
This resulted in a wide button that's a bit too short, and not lined up with the segmented control:
Attempt 2
My second attempt was to use a segmented control, with only 1 segment.
This resulted in a button that's the right shape, size, etc., but it was off center relative to its label.
Naturally, I can manually adjust the button to match the goal, but I feel like I'm missing something. What's the proper way to create these standard buttons?
This is actually quite easy to do and you were close already.
You can use NSButton for that. Note that it has different styles (defined in NSButton.BezelStyle) to choose from. The default one is the one to use inside windows and modals. But for toolbars, to match the style of segmented controls and search bars, you can choose the style .texturedRounded.
You can also set the style via Interface Builder. Note that you have to select the button itself, not the toolbar item around it.
To get the correct size, you seem to set the icon within the toolbar item, not the button itself.
Here is my result:
So I downloaded CircleView and tried to change the code. The program came with a button, color wheel, 2 sliders, and a view. When ever I add anything (Slider, button, textfield), on run time the things I added wouldn't show up. What am I not doing?
It's a .nib file.
This is the edit page.
This is what I see when running the program.
As you can see, the button and textfield doesn't appear during run time.
By default, when you add a button, the autoresizing mask (aka "springs and struts") are set to the following:
That means that when you resize the window, the button you added will stay in the same spot it originally was, instead of being "pulled" down with the edge of the window. This could potentially cause the buttons or textfields you added to be hidden behind the circle view once you resize the window large enough.
To prevent that from happening you'll want to change the autoresizing mask of the items to be "pinned" to the bottom edge of the window, so that they look like in the following image:
To do that, click on the red I bar at the top of the square to remove it, and then click on the lower I area to turn it on.
Note that you can also select multiple buttons or textfields at one time to change them all at the same time.
I have a bunch of buttons. They appears as an graphical image. If a user clicked on a button I can determine with
sender.titleLabel!.text!
which button the user pressed. But the title of the button appears in the view. I want only to show the image and give the button a invisible title. But I think that is not possible.
Me second solution is to create for each button an outlet. But I think with 30 buttons that is a very bad solution.
Option 1:
For the button text color property set opacity to 0. The text is there, but fully transparent.
Option 2:
You may use the tag value to identify a button so you do not have to rely on the button title. You can set the tag value in interface builder (Xcode) or in code. (The tag is an integer.)
I usually prefer option 2 as it is resilient to text changes over time (think of typos, translations for other languages etc.).
I've been struggling for weeks trying to crack this nut so I'm not sure if it's impossible, or if it's my lack of coding chops... or both. I'm not a programmer and I'm a newbie to Dojo Toolkit.
I have a site using the BorderContainer layout. I'm trying to create an effect where I can use a button to open and close a dropdown type box that will contain controls. I need this dropdown to be hidden on page load, and then open when you click the button.
My problem is that when I open the dropdown, it pushes the content pane below it off the bottom of the browser window. I need the lower ContentPane to stay fit within the remaining space of the browser window when the dropdown opens. Additionally, I want the dropdown to sit outside of the scrollable container for the content below it, which is why I have it set up to sit outside a nested BorderContainer below it.
I've created a simplified version of the code to demonstrate my challenge (see link below). If you load the page you can see the center ContentPane scrolls the content. But, if you then click on the button, a dropdown div expands above the content. Then when you scroll, you'll notice that you can't see the full pane because it's in no-man's-land below the bottom of the browser window. I assume that because the div is set to display:none on load, it's size is not accounted for on page load. Then, when you open it by pressing the button, it's size is additive and the pane below doesn't know how to resize or account for the new element.
I've tried using the visibility attribute, but that leaves a gap for the div when it's still closed. I've tinkered with some code that controls the height that shows promise, but each of my dropdown boxes will be different sizes so I'd prefer that the height be set to "auto" rather than a specified pixel size.
Does anyone have any idea how I can accomplish this so that the lower pane will fit in the space without pushing off the screen?
Here's a sample of the page:
http://equium.com/scaffold.html
(I had some problems trying to insert the full HTML page here as a code sample so if that's a preferable way to handle it, and someone can let me know the best way to embed all of that code, I'd appreciate it.)
Thanks is advance, I'd really apprecaite anyone's feedback.
You might want to take a look at dojox.layout.ExpandoPane (though be warned I think it has only worked properly for top and left regions for a while).
Also, I'd suggest simplifying/altering your layout a bit. See example here:
http://jsfiddle.net/taFzv/
(It'd probably need some tweaking to get exactly what you want.)
The real issue you're having is probably that the BorderContainer has no idea that parts of the view resized. ExpandoPane takes care of that by telling the BorderContainer to re-layout after its animation completes.
It works under IE8.0. When dropdown box open, just keep pressing mouse from page and drag to bottom, you could see the content was pushed to out of page. It looks the browser could not detect it and could not add it to "scroll bar" account.
I would suggest taking out all BorderContainers except your top level one, the one with mainPage as the id.
Place your {stuff here} div into the mainPage BorderContainer, after the ContentPane with the Close/Open button. Make sure you make it dojotype dijit.layout.ContentPane, set up layoutpriority, and set region to top. Set the height to 0/x when clicking the Open/Close button, instead of setting display.
Try your page again. If that doesn't fix it, you probably need, a call to layout, resize, or both to indicate to the BorderContainer that it needs to evaluate all its children and size the "center" pane properly. Something like dijit.byId("mainPage").layout(); Do this any time someone presses the Close/Open button, after you have changed the height of any BorderContainer children.
Maybe the dijit.form.DropDownButton would fit your needs. When click the button a tooltip is displayed that can be filled with any content you want. Just as you specified, the dropdown tooltip is only displayed when you click the button, and it doesn't mess with the underlying layout at all. The tooltip sits "on top" of the page.
I am working on a sample which contains list view to display list of names in the data base. Once the application is launched list view will be invisible. After clicking on some button I am making it to visible. If I make it to visible the control bellow the list view are also visible. And I have button bellow that control, once I hove on the list view the button also displays over the list view.
Please let me now how to solve this problem.
It sounds like you have child windows on top of each other in a dialog. Use ShowWindow(SW_HIDE) to hide the windows that are 'underneath'. So when you make the listview visible, hide the button that is underneath.
On the windows desktop, application windows will properly hide other windows that are underneath one another, but in a dialog, different styles are used, and you have to be careful not to let controls overlap or they can draw on top of each other. Instead you need to hide the ones that you don't want to be visible.