When I am trying to register a user from mobile, that data is inserting in the users table but not in oauth_clients. It should upload at the same time.
When I try to login, it shows oauth/token 401 error
Here are my routes:
Route::post('/register' , 'ProviderAuth\TokenController#register');
Route::post('/oauth/token' , 'ProviderAuth\TokenController#authenticate');
This is my register function, which is in TokenConrtoller:
public function register(Request $request)
{
$this->validate($request, [
'device_id' => 'required',
'device_type' => 'required|in:android,ios',
'device_token' => 'required',
'first_name' => 'required|max:255',
'last_name' => 'required|max:255',
'email' => 'required|email|max:255|unique:providers',
'mobile' => 'required',
'password' => 'required|min:6|confirmed',
]);
try{
$Provider = $request->all();
$Provider['password'] = bcrypt($request->password);
$Provider['status'] = 'approved';
$Provider = Provider::create($Provider);
ProviderDevice::create([
'provider_id' => $Provider->id,
'udid' => $request->device_id,
'token' => $request->device_token,
'type' => $request->device_type,
]);
return $Provider;
} catch (QueryException $e) {
if ($request->ajax() || $request->wantsJson()) {
return response()->json(['error' => 'Something went wrong, Please try again later!'], 500);
}
return abort(500);
}
}
This is my authenticate method:
public function authenticate(Request $request)
{
$this->validate($request, [
'device_id' => 'required',
'device_type' => 'required|in:android,ios',
'device_token' => 'required',
'email' => 'required|email',
'password' => 'required|min:6',
]);
Config::set('auth.providers.users.model', 'App\Provider');
$credentials = $request->only('email', 'password');
try {
if (! $token = JWTAuth::attempt($credentials)) {
return response()->json(['error' => 'The email address or password you entered is incorrect.'], 401);
}
} catch (JWTException $e) {
return response()->json(['error' => 'Something went wrong, Please try again later!'], 500);
}
$User = Provider::with('service', 'device')->find(Auth::user()->id);
$User->access_token = $token;
$User->currency = Setting::get('currency', '$');
if($User->device) {
if($User->device->token != $request->token) {
$User->device->update([
'udid' => $request->device_id,
'token' => $request->device_token,
'type' => $request->device_type,
]);
}
} else {
ProviderDevice::create([
'provider_id' => $User->id,
'udid' => $request->device_id,
'token' => $request->device_token,
'type' => $request->device_type,
]);
}
return response()->json($User);
}
I think you should register in JWT auth Like
$token = JWTAuth::fromUser($user);
after Register User
Check this Link for more information
https://blog.pusher.com/laravel-jwt/
Related
I have code in Laravel that allows users to log in using their OTP, and it will authenticate the login by using the OTP. For it to work on mobile, I need an access_token to show it as a response.
this is my code
public function phone_login_checker(Request $request){
$validator = Validator::make($request->all(), [
'phone' => 'required',
'otp_no' => 'required',
]);
if ($validator->fails()) {
return $this->sendError('', ['errors' => $validator->errors()]);
}
if ($user = DB::table('users')
-> where('otp_no', '=' , $request->input('otp_no'))
-> where('phone', '=' , $request->input('phone'))
->exists())
{
$userdetail = DB::table('users')-> where('phone', '=' , $request->input('phone'))->first();
Auth::loginUsingId($userdetail ->id, $remember = true);
$token = $userdetail->remember_token;
return response()->json([
'status'=>1,
'access_token' => "", // Here, I have to add the access token
'user' =>Auth::user(),
'token_type' => 'bearer',
'expires_in' => auth('api')->factory()->getTTL() * 60
]);
}
else{
return response()->json([
'action' => 'showError',
'type' => 'error',
'message' => 'otp is incorrect'
]);
}
}
how can i have access_token?
I am using backpack laravel. Though I am also using Backpack's own authentication, yet I need to maintain a different customer table for App usage. For the customer table, I am using JWTAuth for token generation, but token generation gets failed each time.
public function register(Request $request)
{
$checkEmail = Customer::where('email', $request->email)->first();
if ($checkEmail) {
$response = [
'email_already_used' => true,
];
return response()->json($response);
}
$payload = [
'password' => \Hash::make($request->password),
'email' => $request->email,
'first_name' => $request->first_name,
'last_name' => $request->last_name,
'auth_token' => '',
];
try {
$user = new \App\Models\Customer($payload);
if ($user->save()) {
$token = self::getToken($request->email, $request->password); // generate user token
if (!is_string($token)) {
return response()->json(['success' => false, 'data' => 'Token generation failed'], 201);
}
$user = \App\Models\Customer::where('email', $request->email)->get()->first();
$user->auth_token = $token; // update user token
$user->save();
$response = [
'success' => true,
'data' => [
'id' => $user->id,
'auth_token' => $token,
'first_name' => $user->first_name,
'last_name' => $user->last_name,
'email' => $user->email,
],
];
} else {
$response = ['success' => false, 'data' => 'Couldnt register user'];
}
} catch (\Throwable $e) {
echo ($e);
$response = ['success' => false, 'data' => 'Couldnt register user.'];
return response()->json($response, 201);
}
return response()->json($response, 201);
}
I believe there might be some issue with guards.
Do I need to specify something in app/config.php for this?
I have some problem when I want to make login, I got an issue for my Auth::attempt always false value, Is am I got something wrong in my code?
Controller :
public function register(Request $register)
{
$validator = Validator::make($register->all(), [
'name' => 'required',
'email' => 'required|email',
'password' => 'required',
]);
if ($validator->fails()) {
return response()->json(['error' => $validator->errors()], 401);
} else {
$name = $register->input('name');
$email = $register->input('email');
$pwd = $register->input('password');
$c_pwd = $register->input('c_password');
// Crypting password & c_password to md5
$md5_pwd = md5($pwd);
$md5_c_pwd = md5($c_pwd);
// Salt password & c_password
$password = crypt($md5_pwd, "asd");
$c_password = crypt($md5_c_pwd, "asd");
$data = new User();
if ($password == $c_password) {
$user = User::create([
'name' => $name,
'email' => $email,
'password' => $password,
]);
$success['token'] = $user->createToken('SSOApp')->accessToken;
return response()->json([
'success' => true,
'token' => $success,
'user' => $user
]);
} else {
return response()->json(['error' => "Password doesn't match"], 401);
}
}
}
public function login()
{
$email = request('email');
$pwd = request('password');
$md5 = md5($pwd);
$password = crypt($md5, "asd");
if (Auth::attempt(['email' => $email, 'password' => $password])) {
$user = Auth::user();
$success['token'] = $user->createToken('SSOApp')->accessToken;
return response()->json([
'success' => true,
'token' => $success,
'user' => $user
]);
} else {
return response()->json([
'success' => false,
'message' => 'Invalid Email or Password',
], 401);
}
}
I assume you messed up with Laravel Default Password Hashing System
public function register(Request $register)
{
$validator = Validator::make($register->all(), [
'name' => 'required',
'email' => 'required|email',
'password' => 'required',
'c_password' => 'required|same:password',
]);
if ($validator->fails()) {
return response()->json(['error' => $validator->errors()], 401);
} else {
$name = $register->input('name');
$email = $register->input('email');
$pwd = $register->input('password');
$c_pwd = $register->input('c_password');
// $data = new User();
$user = User::create([
'name' => $name,
'email' => $email,
'password' => bcrypt($password . 'salt'),
]);
$success['token'] = $user->createToken('SSOApp')->accessToken;
return response()->json([
'success' => true,
'token' => $success,
'user' => $user
]);
}
}
public function login()
{
$email = request('email');
$pwd = request('password');
if (Auth::attempt(['email' => $email, 'password' => $password . 'salt'])) {
$user = Auth::user();
$success['token'] = $user->createToken('SSOApp')->accessToken;
return response()->json([
'success' => true,
'token' => $success,
'user' => $user
]);
} else {
return response()->json([
'success' => false,
'message' => 'Invalid Email or Password',
], 401);
}
}
Try this code. I don't know what happened to your code about the password you tried to encrypt it in attempt.
public function login(LoginRequest $request) {
if(!Auth::attempt([
'email' => $request->email,
'password' => $request->password,
'active' => true
])) {
return response()->json('Email or Password is incorrect', 500);
}
$this->user = Auth::user()->load('roles');
return $this->createUserAccessTokenResponse();
}
protected function createUserAccessTokenResponse() {
return response()->json([
'status' => 'success',
'data' => [
'token' => $this->user->createToken($this->user->name)->accessToken,
'user' => $this->user
],
], 200);
}
your problem is that laravel by default hashes the password. so when you do Auth::attempt it's going to hash the password you provided. And the result is what you get, it will always false.
Instead, you need to Other Authentication Methods.
Auth::login($user);
// Login and "remember" the given user...
Auth::login($user, true);
Above is the easiest way to fix your code.
It's recommended to hash your password rather than encrypting the password.
Hashing password in laravel is also
Hash::make($password);
And then you can use Auth::attempt to log in your user.
Laravel Auth uses the bcrypt hashing when saving password via model you may use either of the 2 method
$account->password = bcrypt("YOUR_PASSWORD"); or $account->password = Hash::make("YOUR_PASSWORD");
Then if you're dealing with the auth attempt function, just simply call the method like this
if($account = Auth::attemp(['email' => "YOUR_EMAIL#DOMAIN.COM", 'password' => "YOUR_PASSWORD"])){
//success login, do your extra job here
}else{
//invalid credentials here
}
Instead of using md5 or crypt use \Hash::make() it is much secure
I refactored your code and it does the same thing
You only need to rename your c_password to password_confirmation
Source
Below code does the same thing that your code do
public function register(Request $register)
{
$this->validate($register, [
'name' => 'required',
'email' => 'required|email',
'password' => 'required|confirmed',
]);
$user = User::create([
'name' => $register->input('name'),
'email' => $register->input('email'),
'password' => $register->input('password'),
]);
$success['token'] = $user->createToken('SSOApp')->accessToken;
return response()->json([
'success' => true,
'token' => $success,
'user' => $user,
]);
}
public function login(Request $request)
{
$request->merge(['password' => \Hash::make($request->input('password'))]);
if (Auth::attempt($request->only(['email', 'password']))) {
$user = Auth::user();
$success['token'] = $user->createToken('SSOApp')->accessToken;
return response()->json([
'success' => true,
'token' => $success,
'user' => $user,
]);
}
return response()->json([
'success' => false,
'message' => 'Invalid Email or Password',
], 401);
}
when you hashing password using crypt it has a key to unlock it that's why there is a decrypt but when you use Hash::make() it doesn't have a key to break or unlock it, it will check it's algorithm to see if given password is matching the algorithm that already exists in the database that's why crypt is not safe and Hash::make is much much more safe
This is code of register function which generate error of success and failure.
public function register(Request $request) {
$validator = Validator::make($request->all(),
[
'user_type' => 'required',
'fname' => 'required',
'lname' => 'required',
'dob' => 'required',
'phone' => 'required',
'gender' => 'required',
'uname' => 'required',
'email' => 'required|email',
'password' => 'required',
'c_password' => 'required|same:password',
]);
if ($validator->fails()) {
return response()->json(['failed'=>$validator->errors()], 401); }
$input = $request->all();
$input['password'] = bcrypt($input['password']);
$user = User::create($input);
$success['token'] = $user->createToken('AppName')->accessToken;
$success['status'] = true;
$success['data'] = [$user];
$success['message'] ="User created successfully!";
// return response()->json([
// "message" => " record created"
// ], 201);
return response()->json($success, $this->successStatus);
}
This is my output
1.All error message show in one line..This is my main point..But i want to actually this message of This image...How can i do that?
2.Second thing in API if any user put same email id api give json error not laravel error..
Try this:
return response()->json(['status'=> False, 'msg' => 'This is not successful'], 401);
You can pass custom json in response instead of validator response.
For checking if email exists update the validation like this:
'email' => 'required|email|unique:users,email',
where users is your table name and email is your column name
You just need to replace your code
if ($validator->fails()) {
return response()->json(['failed'=>$validator->errors()], 401);
with
if ($validator->fails()) {
return response()->json(['status'=> 'False', 'msg' => 'This is not sccessfully'], 401);
I'm using laravel with JWT Auth to connect my laravel project to mobile, this is my api controller at laravel
public function login(Request $request) {
$credentials = $request->only('email', 'password');
try {
// attempt to verify the credentials and create a token for the user
if (! $token = JWTAuth::attempt($credentials)) {
return response()->json(['error' => 'invalid_credentials'], 401);
}
} catch (JWTException $e) {
// something went wrong whilst attempting to encode the token
return response()->json(['error' => 'could_not_create_token'], 500);
}
// all good so return the token
$user = Sentry::authenticate($credentials, false);
return response()->json([
'code' => '200',
'message' => 'success',
'last_updated' => $user->updated_at->format("Y-m-d\TH:i:s\Z"),
'data' => [
'id' => $user->id,
'first_name' => $user->first_name,
'last_name' => $user->last_name,
'email' => $user->email,
'username' => $user->username,
'token' => $token
]
]);
}
but how to set the credentials using email or username with this JWT?
If you are using "tymon/jwt-auth" package, then you can just pass the user object to the JWTAuth class and bam!, you can get the JWT token in return which you can use to make user go through the app.
$user = User::where('email', $email)
->orWhere('username', $username)
->first();
$token = null;
if (!$token = JWTAuth::fromUser($get_info)) {
return $this->respondInternalError( 'Can\'t generate the JWT token right now, try again later!', 'object', 400);
}
return response()->json([
'code' => '200',
'message' => 'success',
'last_updated' => $user->updated_at->format("Y-m-d\TH:i:s\Z"),
'data' => [
'id' => $user->id,
'first_name' => $user->first_name,
'last_name' => $user->last_name,
'email' => $user->email,
'username' => $user->username,
'token' => $token
]
]);
You can login using email or using the following format
public function login(Request $request)
{
//validate incoming request
$this->validate($request, [
'email_phone' => 'required|string',
'password' => 'required|string',
]);
try {
$login_type = filter_var( $request->email_phone, FILTER_VALIDATE_EMAIL ) ? 'email' : 'phone';
// return $login_type;
$credentials = [$login_type => $request->email_phone, 'password'=>$request->password];
if (! $token = Auth::attempt($credentials)) {
return response()->json($this->customResponse("failed", "Unauthorized"), 401);
}
return $this->respondWithToken($token);
} catch(JWTException $e) {
return response()->json($this->customResponse("failed", "An error occured, please contact support.", $user), 500);
}
}