Hello I am using the following command on Ubuntu:
dig google.com #localhost -p 4000
I need a corresponding command on Windows.
You can install the digtool comes along with bind for windows. Use the below url to download bind - https://www.isc.org/downloads/
Once installed, dig will work on windows.
You can follow the instructions from this blog - http://nil.uniza.sk/linux-howto/how-install-dig-dns-tool-windows-10
Related
I cant install heroku in my kali linux operating system. how can i resolve this issue?
isn't it not possible to run heroku in kali linux?
when I have try to install, it show snap command not found.
Heroku no longer supports Snap installs:
Snap installs are no longer supported. Please use another install method below.
Since Kali is derived from Debian, you should be able to use the Debian / Ubuntu method (which doesn't auto-update) or the standalone tarball method (which does). You can also use the NPM / Yarn package if you prefer, though Heroku recommends against it.
All of these options require some amount of trust in Heroku. The first two pull a script down from the Internet and pipe it into sh, which always makes me a bit uneasy. I suspect they both request elevated privileges during the install process. Instead of piping the file directly in to sh as Heroku recommends, I suggest you download it and at least give it a quick read through the first time.
In any case, here is the command that Heroku recommends to install the standalone version:
curl https://cli-assets.heroku.com/install.sh | sh
I have a client [Windows 10 VM] and a server [say a linux based VM].
I have Apache running on the Linux Server.
I have a file on the linux server that I want to download on my windows client.
I want to do it in 2 ways from the windows CMD:
-Using curl
-using wget
I tried the foll commands on my windows CMD. But doesnt work. Is something wrong with my CLI?
curl http://x.x.x.x/home/abc/ -O test.zip
wget http://x.x.x.x/home/abc/ -O test.zip
From curl side, most probably curl.exe is missed on Windows Client machine or could not find it. One of the options is to download curl:
Download curl zip for Windows from this page: https://curl.se/download.html
Unzip and you will find the ..\bin\curl.exe
Also add ...\bin\ to your Path variable in System Settings.
To use wget in Windows, you can follow this link and it worked for me: https://medium.com/nerd-for-tech/using-wget-command-in-windows-10-environment-d766b8f526e9
Short tutorial:
Download the GnuWin setup
Install it
Open the wget directory
Add to Environmet Variables as well.
I try to install laravel with the original laravel document but nothing happened, I got many errors, for example I tried this command on CMD;
curl -s https://laravel.build/example-app | bash
but I got this error
(23) Failed writing body
When I tried with PowerShell I got this error;
cmdlet Invoke-WebRequest at command pipeline position 1
Supply values for the following parameters:
Uri:
curl : Cannot find drive. A drive with the name 'https' does not exist.
At line:1 char:1
curl -s https://laravel.build/example-app | bash
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CategoryInfo : ObjectNotFound: (https:String) [Invoke-WebRequest], DriveNotFoundException
FullyQualifiedErrorId : DriveNotFound,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
Specs;
Docker Engine v20.10.0
Edition Windows 10 Home Version 20H2 Installed on 14/08/2020 OS
build 19042.685 Experience Windows Feature Experience Pack
120.2212.551.0
I ran into this issue as well and found the (usually excellent) Laravel documentation to be a little vague.
First of all, I have some knowledge of Docker but wanted to get much better acquainted so the recent release of Laravel Sail seemed like an excellent starting point.
Install Docker Desktop https://docs.docker.com/docker-for-windows/install/
Install and enable WSL2 https://learn.microsoft.com/en-us/windows/wsl/install-win10#simplified-installation-for-windows-insiders
The Laravel docs mention this in above step but the part I missed was installing a Linux distribution at the same time (via the Microsoft Store). I assumed Sail took care of this part.
Goto the windows store a get your distro e.g. Ubuntu 20.04 (https://www.microsoft.com/en-gb/p/ubuntu-2004-lts/9n6svws3rx71?rtc=1)
Install Windows Terminal - https://www.microsoft.com/en-us/p/windows-terminal/9n0dx20hk701?rtc=1&activetab=pivot:overviewtab. Up until now, I was using Cmder or ConEmu rather than the Command Prompt. The important difference is you can start a new shell for windows or any of the Linux distributions you have installed. Again, I assumed you could use the curl -s https://laravel.build/example-app | bash command in my windows Cmder - not the case.
Start up a new Linux shell and if you ls you'll see your Windows filesystem. From there I cd'd to my projects directory, ran curl -s https://laravel.build/example-app | bash and that took care of the rest.
One caveat is that you may have to enable any downloaded Linux distributions in Docker:
Of course, the process makes sense when you solve it and Sail does offer some useful shortcuts in getting a Laravel project up and running quickly with Docker but complete newcomers could be forgiven for thinking it takes care of absolutely everything - which it doesn't.
Side note
The reason you were getting the error in PowerShell is because PS has an alias for curl but not the curl you expect. (cURL in power shell windows 8.1: "A drive with the name 'localhost' does not exist")
You can permanently remove this (https://github.com/lukesampson/scoop/issues/56#issuecomment-609098474) but you may not need to now you know how to use the command in your Linux shell.
The solution above provided by #chris-j works like a charm, but if you still get the error "Docker in not running" even if the it's green consider doing the following
Do sudo su and then curl -s https://laravel.build/example-app | bash
I'm following the blog post here.
I'm using a Windows machine, so I can't follow the exact steps. This is what I've done:
Installed the Tor Browser for Windows
Installed pytorctl
pip install git+https://github.com/aaronsw/pytorctl
Installed Privoxy
Attempted to use the Tor command line. I'm assuming it is the exe file in the directory "Tor Browser\Browser\TorBrowser\Tor"
tor --hash-password *mypassword*
Unfortunately, this command runs but there is no response.
If anyone has any suggestions, much would be appreciated. Do you think this could be a firewall issue?
Apparently this is a known bug that when your run tor.exe from the command line it is running but opens in a hidden window. To get around this, run the following: tor --hash-password *your_password* | more. Hopefully this works. See more about the issue here.
I have a fresh install of cygwin and xemacs on my home laptop. I'm trying to get to the packages list in xemacs, but not having much luck.
First of all I was getting an error message telling me "ftp.XXX.com seems not a pty". Following the instructions here I was able to tell efs to use lftp, and got past that error.
Now I get told:
Process not open for writing: #<process "*ftp yyy#ftp.xxx.org*" pid 9999 state:exit>
Any idea what's going on there?
The problem has to do with which ftp you are using. From the message, I believe you are trying to use the ftp that comes with Windows. It won't work as the native Windows ftp does not act like a pty.
The best solution I can suggest is to install the Cygwin port of ftp.