I am using spring boot. There are some common classes to the 2 exsisting spring boot projects. I need to add common module as sub module to them .how to do this please guide me step by step.
You can create a library/jar/dependency of the common code and than you can access it from the dependent client.
A very detailed example is provided in the below article
https://blog.scottlogic.com/2016/06/13/code-reuse-in-microservices-architecture.html
You can create a Maven project/Gradle of common code project and add dependency as Maven or Gradle modules to the project that you are using,so now you can access it from the common project.
you will have projects like this below, where your common module will be shared amongst the project e.g. constants. or messages.
You can also go with parent-child project structure if your requirement is too complex.
here is link is for your reference link.
Related
Experts,
I need some expert advice on how to approach the below use case in spring boot.
I need to have a maven multi-module approach to my project.
I need to have a single jar as output of the final build process.
There are to be common modules for controllers, data access and other functionality
Other modules are to be created based on functionality domain for eg a module for Payroll, a module for Admin etc etc.
Each domain functional module will then have their own controllers extending the common controller, exception handler and so on.
Each module will also have its own set of thyme leaf pages.
The reason for following such an approach is we have development in phases and we will be rolling out based on functional modules.
Here are the issues that I can sense using this approach.
Where do I add the spring web dependency? If I add to the parent pom - it gets replicated across the children and there will be port conflict issues as each module loads. the same issue will also be there the moment I add it to two child modules.
How do I build the fat jar which has all the jars from all modules and works as the final deployment?
All the text that I read i can't see anything even close to what I am trying to achieve.
AD1. They will not unless you are trying to setup independent application context in each module. Of course you can do that(it might be complicated but I believe it's achievable), but for me it's an overkill. Personally I think it's better to have one application context and rely on scanning components that are present in classpath.
AD2. The structure in maven might be a little bit complicated and overwhelming at first glance but it makes sense. Here's how I see it:
Create a parent module that will aggregate each module in project and will declare library/plugin dependencies for submodules.
Create 1-N shared submodules that will be used in other modules. With come common logic, utils, etc.
Create 1-N submodules that will be handling your business logic
Create an application submodule that creates application context and loads configuration and components from classpath
Create a submodule that will be responsible for packaging process, either to war, jar, uber-jar or whatever else you desire. Maven jar plugin should do that for you. For executable uber-jar, you have dedicated tool from spring.
Now you can choose three ways(these ways I know) of loading your modules.
1. Include some modules in maven build based on the build configuration via maven profiles and let spring IoC container load all the components he finds in the classpath
2. Include all of the modules in maven build and load them depending on spring active profiles - you can think about it as of feature flag. You annotate your components or configuration class with #Profile("XYZ") telling spring IoC container whether to instantiate component or not. You will need (most flexible solution) to provide a property file which tells spring which profiles are active and thus which modules should be loaded
3. Mix of these two above.
Solution 1 pros:
build is faster (modules that are not included will be skipped during build)
final build file is light (modules that are not included are... not included ;))
nobody can run module that is not present
Solution 1 contras:
project descriptor in maven may explode as you might have many different profiles
Solution 2 pros:
it's fairly easy and fun to maintain modules from code
less mess in project descriptor
Solution 2 contras:
somebody can run module that is not intended to be run as it's present in classpath, but just excluded during runtime via spring active profiles
final build file might be overweight - unused code is still present in code
build might take longer - unused code will be compiled
Summary:
It's not easy to build well structured project from scratch. It's much more easier to create a monolith and then split it into modules. It's because if you already created a project, you've probably already identified all the domains and relations between them.
Over past 8 years of using maven, I honestly and strongly recommend using gradle as it's far more flexible than maven. Maven is really great tool, but when it comes to weird customization it often fails as it's build capabilities rely on plugins. You can't write a piece of code on the fly to perform some custom build behaviour while buidling your project, you must have a dedicated plugin for doing that. If such plugin exists it's fine, if it's not you will probably end up writing your own and handling its shipment, so anyone in your company can easily perform project build.
I hope it helps. Have fun ;)
I'm using Intellij IDE Ultimate and I create a Project with spring inicializer. The problem is... now I need create more microservices (Spring Boot) but idk how to do this in IDE. I the end I need 3 microservices. Have a terminal command to create a new microservice inside my project? Or a way in the IDE to do this.
What you need to do is creating several modules (normally Maven modules), each of them is a SpringBoot application with its own application context and its own configuration, directories structure, etc.
IntelliJ has a concept of Module which matches very well the Maven module concept.
If you go to File, Project Structure, Project Settings, Modules you can see a very nice view of the current modules (in your case it should be only one). You can add or remove modules there. (Also by just clicking File-New Module, but the Project Structure View is more useful).
If you decide going the Maven way, you can also create your structure in disk and its POMs and import maven project in IntelliJ.
In any case, keep in mind that you will like to deploy every microservice as a separate and autonomous deployable unit.
I read a lot of posts regarding the ways to use spring-boot-starter-parent in a spring boot project.
Essentially, I read posts (Spring documentation also talks about this) describing two ways to do this
To use spring-boot-starter-parent as the project parent directly. It gives us the benefits of having the dependency management as well as the plugin management.
The other way is to import the spring-boot-starter parent in the project pom (we may need this in case we already have a parent pom for the project).
It allows us to get the benefits of dependency management but not the plugin management)
I am creating a new Maven multi module project. Ideally I would like to have my own custom parent and also get all the benefits of using the Spring-boot-starter-parent.
I was wondering if it made sense to create a custom parent for my maven projects. This parent would in turn be a child of the spring-boot-starter-parent.
If I am not missing anything, this way I could get the benefits of having the dependency management and plugin management from spring-boot-starter-parent and at the
same time have a custom parent for all my projects where I could define some other common dependencies or if needed override the dependencies defined in the
spring-boot-starter-parent which would then be inherited by all my projects.
Does this design make sense or am I missing something.
What are the drawbacks of this approach?
There are no drawbacks -- this is exactly what you're meant to do if you want a multimodule spring-boot project. However, consider this: typically multi-module projects have all modules versioned together, released together, and dependant on each other. This rarely makes sense in a group of spring-boot modules, which are typically of the micro-service style and which require independent evolution. So, you should question your need for a multi-module project at all.
I Implemented two maven project each using spring MVC, Hibernate, Jax-RS service. they have separate configuration, database, controllers, models, services.
I need to combine both the project in such a way that one is work as parent and other should be its child and can access parent services.
If you want to share configuration among projects, you can use a parent pom.
If you want to combine two projects as subprojects of one larger one, you can use modules. Both concepts are described in
https://maven.apache.org/guides/introduction/introduction-to-the-pom.html#Project_Inheritance_vs_Project_Aggregation
If you want to access classes from project in another project, add a dependency in the dependencies section of your pom.
I was going to couple of blogs to get the basics of maven, in the mean time I was confused when I can use the multi module project. It will be great if the answer includes example.
The main idea is that you have small modules that are dependent on each other and can be grouped together. Its not necessary that all sub-modules in a multi-module project be dependent on every other sub-module.
Lets consider you have multiple modules for an application (e.g a social networking application) that belong together. These modules can range from smaller modules like a client consumer module or a server module that will serve requests initiated by the client module, an ejb module that will hold your beans that are used by both the server and the client module and a deploy-able web module that would comprise of your front-end application etc.
This is usually handled via a multi-module build which means all modules have the same version number, are bound together under a similar platform (a social networking application in our example) but can be accessed and used by other separately.
Please check How to assemble multimodule maven project into one WAR? to know how to package a multi module project in a war file. also, you can check maven official site on Introduction to pom file