I need to escape the % character in interactive Command Prompt (NOT in a batch file). How do I echo the text a %pathext% b; %pathext% expands to the environment variable; ^, %, \ and "quotes" all do not work. Please base the answer on: echo a %pathext% b.
Many thanks in advance.
There is one simple solution, but it's not 100% bullet proof
echo a %path^ext% b
The position of the caret can be moved to any position.
This works, because the variable expansion on the command line works different than in batch files.
If an undefined variable should be expanded, in a batch file it results in an empty text, but on the cli the percent expression will be used unchaged.
The caret will be removed in a later step of the parser.
But it can still fail when there exists a variable named path^ext
For a bullet proof solution, you need to create a percent sign and expand it.
for /F "delims==" %# in ("%=%=") do echo a %#pathext%# b
echo a %^pathext% b
Use a caret inside the variable (it can be anywhere inside the % signs) to prevent the parser from recognizing and substituting the variable.
Please consider the following very simple batch script (the file is named test.cmd):
#echo off
set "var1=%~1"
echo %var1%
The script should be called with one command line parameter, should assign the string which is contained in that parameter to a variable, and should output the variable.
As expected, I get an error message when I call this script with a command line parameter which contains an ampersand (&):
C:\Batch>test "a&b"
a
'b' is not recognized as an internal or external command,
operable program or batch file.
The reason for this has been discussed in some other questions here and elsewhere, for example that one; the usual remedy is to use delayed expansion. So I changed the script accordingly:
#echo off
setLocal enableDelayedExpansion
set "var1=%~1"
echo !var1!
Now it works with the parameter from before:
C:\Batch>test "a&b"
a&b
But there is a new problem. When the command line parameter contains an exclamation mark (!), it will be dropped from the output:
C:\Batch>test a!b
ab
This behavior also has been discussed at several places, for example here; the crucial thing to note is that dropping the exclamation mark happens during the assignment, not during the echo.
Despite a lot of research, I did not find a question here which provided an elegant solution for both problems at once. That is, is there an elegant way to assign a command line parameter to a variable when that parameter contains an ampersand AND an exclamation mark?
It seems that I need the delayed expansion to treat the ampersand correctly, but this destroys the exclamation mark.
The only solution I currently see is to not use delayed expansion and to add code to explicitly quote all ampersands in the input string. This would be so ugly that I seriously think that I am missing something here.
As a side note, the reason for the problem actually seems to be that there (IMHO!) is no way to get the command line parameter in a delayed-expanded fashion. The syntax for the first parameter is %~1, there is no such thing as !~1.
Move the setLocal enableDelayedExpansion after the the set„ that's all.
#echo off
set "var1=%~1"
setLocal enableDelayedExpansion
echo !var1!
I am trying to understand more about how the Windows CMD parser works. I have been reading several posts about the CMD parser, including this one, but I can't seem to figure out why both carets (^) in the following code are stripped when delayed expansion is DISABLED:
#echo off
setlocal disabledelayedexpansion
set $test_var=This is text with escaped delayed expansion syntax - ^^!$var1^^! and ^^!$var2^^!
echo $test_var = %$test_var%
echo.
pause
I expected the result of running the code to produce the following output:
$test_var = This is text with escaped delayed expansion syntax - ^!$var1^! and ^!$var2^!
Instead, ALL carets are removed:
$test_var = This is text with escaped delayed expansion syntax - !$var1! and !$var2!
From reading the post about the parser, it is my understanding that Phase 2 removes special characters, which includes the caret (^) escape character. From my reading it seems that only one (1) caret character should be removed. Why are both carets removed?
Thanks For Your Help!
The key to the answer is the fact that normal (%-)expansion (phase 1) occurs before recognition of special characters (in phase 2) — refer to the accepted answer to: How does the Windows Command Interpreter (CMD.EXE) parse scripts?
The first carets (^) become removed by the command interpreter in the line
set $test_var=This is text with escaped delayed expansion syntax - ^^!$var1^^! and ^^!$var2^^!
when phase 2 is done, so every instance of ^^ becomes one literal ^. You can prove this when you change #echo off to #echo on, so each parsed command line becomes echoed before being executed, or when you place the following command in the next line (thanks to user jeb for the hint):
rem // This displays the actual content of the variable:
set $test_var
In your next line
echo $test_var = %$test_var%
removal of the remaining carets happens, because – as already said – %-expansion (phase 1) happens first, resulting in a command line like
echo $test_var = This is text with escaped delayed expansion syntax - ^!$var1^! and ^!$var2^!
and then phase 2 follows, where the remaining carets are recognised and removed, resulting in this final text
$test_var = This is text with escaped delayed expansion syntax - !$var1! and !$var2!
You can protect the carets (as well as any other special characters) in the set command line when using the quoted syntax, like this:
set "$test_var=This is text with escaped delayed expansion syntax - ^!$var1^! and ^!$var2^!"
So you can save one level of escaping. However, this only works when the command extensions are enabled, but this is the default setting of the command interpreter anyway.
For the echo command line however, you cannot use such a method, because quotation marks became returned too.
I spotted that you used echo. to output an empty line. You should better use echo/ or echo( (refer to the external resource ECHO. FAILS to give text or blank line - Instead use ECHO/ to find out why).
By the way, your displayed text does not match the actual situation, because you have got delayed expansion disabled.
I am trying to use the rem command to place a remark in a command line that contains several commands. Here are some examples to illustrate what I mean:
echo Hello & rem.Comment & echo world!
(echo Hello & rem.Comment) & echo world!
This works perfectly fine, both echo commands in each line are executed as I expect. The . seems to modify the behaviour of the rem command so that it does not treat the remaining line as comment:
Hello
world!
If I placed a SPACE (or any other delimiter TAB, ,, ;, =) instead of the ., the remaining line and therefore the second echo would be ignored (for the second example a More? prompt appears, because the ) is part of the remark and cmd expects a closing ) because of the ():
Hello
I found out that beside ., the following characters work as well: :, /, \, [, ] and +.
What else works is escaped delimiters: ^SPACE, ^TAB, ^,, ^; and ^=.
Nevertheless, is there a secure and reliable way to do that?
I would be very glad about a solution that works for both command prompt and batch-files.
According to this external reference, the familiar syntax echo. for returning a blank line fails under certain circumstances, hence using echo( is recommended as this is the only reliable method.
However, for rem, the ( does not work, everything after rem( is not recognised as a command.
Since I am aware of a weird bug of the rem command in Windows XP (reference this external link: rem %~), I am interested in a solution that applies to Windows Vista, Windows 7 or higher.
The "weird" REM %~ "bug" is not limited to XP. It is present in all modern versions of Windows that use CMD.EXE. After reading your question, I wrote Simon of SS64 a note to give clarification on the issue. REM can also fail if variable var exists, and you have rem %var:=.
So technically, there is no guaranteed safe way to blindly use REM.
But, if you are willing to accept the fatal % expansion risk, most of your listed hacks are safe to use, but only if the line includes at least one additional command via & or &&.
REM. is never safe to use in any situation if there exists a file named REM (without extension).
The folder dividers \ and / always fail if the current folder contains a file named test.bat and you use REM\..\test.bat.
In a similar fashion, REM:\..\test.bat always fails.
Every one of the other hacks can fail stand-alone in a similar situation. For example, REM^[tab]\..\test.bat fails stand-alone, but works if concatenated with another command. This is the only type of situation I've found where +, [, ], or ^[tab] can fail.
There are additional cases where some of the other hacks can fail.
Any character in the set C (^[space], ^,, ^;, ^=) that are valid in file names can fail stand-alone if remC.bat exists. For example, the following fails stand-alone:
rem^ Fails if "rem .bat" exists
Yet they are all safe when concatenated with another command:
echo OK&rem^ This is safe
rem^ This is safe &echo OK
Temporary Update
Some of the above is wrong. Investigations are ongoing at http://www.dostips.com/forum/viewtopic.php?f=3&t=6895&p=44813#p44813.
I believe the following are the simplest forms that are guaranteed to work in all cases (disregarding invalid % expansion)
REM: At least one space (or other token delimiter) must be after :
REM\ At least one space (or other token delimiter) must be after \
REM/ At least one space (or other token delimiter) must be after /
REM^[tab] At lease one space (or other token delimiter) must be after [tab]
But I won't correct the earlier info until the dust has settled
End Temporary Update
My favorite way to use inline comments is to use impossible variables. Only dynamic pseudo variables can contain = in a name, and no variable name can ever contain two =. So I like to use %= Remark goes here =%. The beauty of this form is it can be used pretty much anywhere with impunity, as long as the comment does not contain % or :. It can even be used safely within parenthesized blocks of code.
for %%F in (*) do (
%= Comment within code block =%
%= 2nd comment within code block =%
FINDSTR /B %=Must match beginning of line=% "string" %= Search string =% "%%F" %= File to search =%
)
This variants of REM seems to be a safe way to enable the & sign in the comment part.
REM/
REM\
REM:
Despite of #dbenham's comment, I can't create any file which would iterfere with these REM variants (I tried REM.bat, REM;.bat and so on).
It's always a good idea to add a space after the REM^<char>.
The problem with %~ can't be solved, as the cmd.exe uses multiple parser phases for each line.
And the %~ error is detected in an early phase (percent expansion phase), just before the phase where a REM would be detected.
But at all, I prefere percent comments for inline comments, described by dbenham
EDIT:
I removed the carets from REM^<char> as it's doesn't matter.
Normally a REM remarks the rest of the line, as the batch parser detects the REM keyword in phase2 of the parser and switches to a specialized parser only for REM.
But when a character is appended to REM the keyword will nt be detected in phase2.
If the character is one of \/;,=+( the parser will remove it later and executes a normal REM command.
That's the cause why the command operators &, &&, |, || can be recognized in this case.
Why rem/ | break fails, but (REM/) | break works?
It's because the pipe starts two seperate cmd child processes.
With surrounding parenthesis the command will be parsed the first time in the child process.
But without parenthesis, the parent process has already parsed the REM/ and checks if the file exists (but doesn't execute it).
But when such a file exists then the parser is smart enough to remove the seperator character and detects that REM is an internal command.
This behaviour looks a bit strange.
I've been writing some batch files, and I ran into this user guide, which has been quite informative. One thing it showed me was that lines can be commented not just with REM, but also with ::. It says:
Comments in batch code can be made by using a double-colon, this is better than using the REM command because labels are processed before redirection symbols. ::<remark> causes no problems but rem <remark> produces errors.
Why then, do most guides and examples I see use the REM command? Does :: work on all versions of Windows?
tl;dr: REM is the documented and supported way to embed comments in batch files.
:: is essentially a blank label that can never be jumped to, whereas REM is an actual command that just does nothing. In neither case (at least on Windows 7) does the presence of redirection operators cause a problem.
However, :: is known to misbehave in blocks under certain circumstances, being parsed not as a label but as some sort of drive letter. I'm a little fuzzy on where exactly but that alone is enough to make me use REM exclusively. It's the documented and supported way to embed comments in batch files whereas :: is merely an artifact of a particular implementation.
Here is an example where :: produces a problem in a FOR loop.
This example will not work in a file called test.bat on your desktop:
#echo off
for /F "delims=" %%A in ('type C:\Users\%username%\Desktop\test.bat') do (
::echo hello>C:\Users\%username%\Desktop\text.txt
)
pause
While this example will work as a comment correctly:
#echo off
for /F "delims=" %%A in ('type C:\Users\%username%\Desktop\test.bat') do (
REM echo hello>C:\Users\%username%\Desktop\text.txt
)
pause
The problem appears to be when trying to redirect output into a file. My best guess is that it is interpreting :: as an escaped label called :echo.
Comments with REM
A REM can remark a complete line, also a multiline caret at the line end, if it's not the end of the first token.
REM This is a comment, the caret is ignored^
echo This line is printed
REM This_is_a_comment_the_caret_appends_the_next_line^
echo This line is part of the remark
REM followed by some characters .:\/= works a bit different, it doesn't comment an ampersand, so you can use it as inline comment.
echo First & REM. This is a comment & echo second
But to avoid problems with existing files like REM, REM.bat or REM;.bat only a modified variant should be used.
REM^;<space>Comment
And for the character ; is also allowed one of ;,:\/=
REM is about 6 times slower than :: (tested on Win7SP1 with 100000 comment lines).
For a normal usage it's not important (58µs versus 360µs per comment line)
Comments with ::
A :: always executes a line end caret.
:: This is also a comment^
echo This line is also a comment
Labels and also the comment label :: have a special logic in parenthesis blocks.
They span always two lines SO: goto command not working.
So they are not recommended for parenthesis blocks, as they are often the cause for syntax errors.
With ECHO ON a REM line is shown, but not a line commented with ::
Both can't really comment out the rest of the line, so a simple %~ will cause a syntax error.
REM This comment will result in an error %~ ...
But REM is able to stop the batch parser at an early phase, even before the special character phase is done.
#echo ON
REM This caret ^ is visible
You can use &REM or &:: to add a comment to the end of command line.
This approach works because '&' introduces a new command on the same line.
Comments with percent signs %= comment =%
There exists a comment style with percent signs.
In reality these are variables but they are expanded to nothing.
But the advantage is that they can be placed in the same line, even without &.
The equal sign ensures, that such a variable can't exists.
echo Mytest
set "var=3" %= This is a comment in the same line=%
The percent style is recommended for batch macros, as it doesn't change the runtime behaviour, as the comment will be removed when the macro is defined.
set $test=(%\n%
%=Start of code=% ^
echo myMacro%\n%
)
Performance REM vs :: vs %= =%
In short:
:: and %= =% seems to have the same performance
REM takes ~ 50% more time than ::
In blocks, especially loops only REM consumes time, but :: is removed from the cached block when the block is parsed, therefore it consumes no time
For more info see SO: Question about Comments in Batch *.bat files and speed
This answer attempts a pragmatic summary of the many great answers on this page:
jeb's great answer deserves special mention, because it really goes in-depth and covers many edge cases.
Notably, he points out that a misconstructed variable/parameter reference such as %~ can break any of the solutions below - including REM lines.
Whole-line comments - the only directly supported style:
REM (or case variations thereof) is the only official comment construct, and is the safest choice - see Joey's helpful answer.
:: is a (widely used) hack, which has pros and cons:
Pros:
Visual distinctiveness and, possibly, ease of typing.
Speed, although that will probably rarely matter - see jeb's great answer and Rob van der Woude's excellent blog post.
Cons:
Inside (...) blocks, :: can break the command, and the rules for safe use are restrictive and not easy to remember - see below.
If you do want to use ::, you have these choices:
Either: To be safe, make an exception inside (...) blocks and use REM there, or do not place comments inside (...) altogether.
Or: Memorize the painfully restrictive rules for safe use of :: inside (...), which are summarized in the following snippet:
#echo off
for %%i in ("dummy loop") do (
:: This works: ONE comment line only, followed by a DIFFERENT, NONBLANK line.
date /t
REM If you followed a :: line directly with another one, the *2nd* one
REM would generate a spurious "The system cannot find the drive specified."
REM error message and potentially execute commands inside the comment.
REM In the following - commented-out - example, file "out.txt" would be
REM created (as an empty file), and the ECHO command would execute.
REM :: 1st line
REM :: 2nd line > out.txt & echo HERE
REM NOTE: If :: were used in the 2 cases explained below, the FOR statement
REM would *break altogether*, reporting:
REM 1st case: "The syntax of the command is incorrect."
REM 2nd case: ") was unexpected at this time."
REM Because the next line is *blank*, :: would NOT work here.
REM Because this is the *last line* in the block, :: would NOT work here.
)
Emulation of other comment styles - inline and multi-line:
Note that none of these styles are directly supported by the batch language, but can be emulated.
Inline comments:
* The code snippets below use ver as a stand-in for an arbitrary command, so as to facilitate experimentation.
* To make SET commands work correctly with inline comments, double-quote the name=value part; e.g., SET "foo=bar".[1]
In this context we can distinguish two subtypes:
EOL comments ([to-the-]end-of-line), which can be placed after a command, and invariably extend to the end of the line (again, courtesy of jeb's answer):
ver & REM <comment> takes advantage of the fact that REM is a valid command and & can be used to place an additional command after an existing one.
ver & :: <comment> works too, but is really only usable outside of (...) blocks, because its safe use there is even more limited than using :: standalone.
Intra-line comments, which be placed between multiple commands on a line or ideally even inside of a given command.
Intra-line comments are the most flexible (single-line) form and can by definition also be used as EOL comments.
ver & REM^. ^<comment^> & ver allows inserting a comment between commands (again, courtesy of jeb's answer), but note how < and > needed to be ^-escaped, because the following chars. cannot be used as-is: < > | (whereas unescaped & or && or || start the next command).
%= <comment> =%, as detailed in dbenham's great answer, is the most flexible form, because it can be placed inside a command (among the arguments).
It takes advantage of variable-expansion syntax in a way that ensures that the expression always expands to the empty string - as long as the comment text contains neither % nor :
Like REM, %= <comment> =% works well both outside and inside (...) blocks, but it is more visually distinctive; the only down-sides are that it is harder to type, easier to get wrong syntactically, and not widely known, which can hinder understanding of source code that uses the technique.
Multi-line (whole-line block) comments:
James K's answer shows how to use a goto statement and a label to delimit a multi-line comment of arbitrary length and content (which in his case he uses to store usage information).
Zee's answer shows how to use a "null label" to create a multi-line comment, although care must be taken to terminate all interior lines with ^.
Rob van der Woude's blog post mentions another somewhat obscure option that allows you to end a file with an arbitrary number of comment lines: An opening ( only causes everything that comes after to be ignored, as long as it doesn't contain a ( non-^-escaped) ), i.e., as long as the block is not closed.
[1] Using SET "foo=bar" to define variables - i.e., putting double quotes around the name and = and the value combined - is necessary in commands such as SET "foo=bar" & REM Set foo to bar., so as to ensure that what follows the intended variable value (up to the next command, in this case a single space) doesn't accidentally become part of it.
(As an aside: SET foo="bar" would not only not avoid the problem, it would make the double quotes part of the value).
Note that this problem is inherent to SET and even applies to accidental trailing whitespace following the value, so it is advisable to always use the SET "foo=bar" approach.
Another alternative is to express the comment as a variable expansion that always expands to nothing.
Variable names cannot contain =, except for undocumented dynamic variables like
%=ExitCode% and %=C:%. No variable name can ever contain an = after the 1st position. So I sometimes use the following to include comments within a parenthesized block:
::This comment hack is not always safe within parentheses.
(
%= This comment hack is always safe, even within parentheses =%
)
It is also a good method for incorporating in-line comments
dir junk >nul 2>&1 && %= If found =% echo found || %= else =% echo not found
The leading = is not necessary, but I like if for the symmetry.
There are two restrictions:
1) the comment cannot contain %
2) the comment cannot contain :
After I realized that I could use label :: to make comments and comment out code REM just looked plain ugly to me. As has been mentioned the double-colon can cause problems when used inside () blocked code, but I've discovered a work-around by alternating between the labels :: and :space
:: This, of course, does
:: not cause errors.
(
:: But
: neither
:: does
: this.
)
It's not ugly like REM, and actually adds a little style to your code.
So outside of code blocks I use :: and inside them I alternate between :: and :.
By the way, for large hunks of comments, like in the header of your batch file, you can avoid special commands and characters completely by simply gotoing over your comments. This let's you use any method or style of markup you want, despite that fact that if CMD ever actually tried to processes those lines it'd throw a hissy.
#echo off
goto :TopOfCode
=======================================================================
COOLCODE.BAT
Useage:
COOLCODE [/?] | [ [/a][/c:[##][a][b][c]] INPUTFILE OUTPUTFILE ]
Switches:
/? - This menu
/a - Some option
/c:## - Where ## is which line number to begin the processing at.
:a - Some optional method of processing
:b - A third option for processing
:c - A forth option
INPUTFILE - The file to process.
OUTPUTFILE - Store results here.
Notes:
Bla bla bla.
:TopOfCode
CODE
.
.
.
Use what ever notation you wish *'s, #'s etc.
This page tell that using "::" will be faster under certain constraints
Just a thing to consider when choosing
good question... I've been looking for this functionality for long too...
after several tests and tricks it seem the better solution is the more obvious one...
--> best way I found to do it, preventing parser integrity fail, is reusing REM:
echo this will show until the next REM &REM this will not show
you can also use multiline with the "NULL LABEL" trick...
(dont forget the ^ at the end of the line for continuity)
::(^
this is a multiline^
comment... inside a null label!^
dont forget the ^caret at the end-of-line^
to assure continuity of text^
)
James K, I'm sorry I was wrong in a fair portion of what I said. The test I did was the following:
#ECHO OFF
(
:: But
: neither
:: does
: this
:: also.
)
This meets your description of alternating but fails with a ") was unexpected at this time." error message.
I did some farther testing today and found that alternating isn't the key but it appears the key is having an even number of lines, not having any two lines in a row starting with double colons (::) and not ending in double colons. Consider the following:
#ECHO OFF
(
: But
: neither
: does
: this
: cause
: problems.
)
This works!
But also consider this:
#ECHO OFF
(
: Test1
: Test2
: Test3
: Test4
: Test5
ECHO.
)
The rule of having an even number of comments doesn't seems to apply when ending in a command.
Unfortunately this is just squirrelly enough that I'm not sure I want to use it.
Really, the best solution, and the safest that I can think of, is if a program like Notepad++ would read REM as double colons and then would write double colons back as REM statements when the file is saved. But I'm not aware of such a program and I'm not aware of any plugins for Notepad++ that does that either.
A very detailed and analytic discussion on the topic is available on THIS page
It has the example codes and the pros/cons of different options.
There are a number of ways to comment in a batch file
1)Using rem
This is the official way. It apparently takes longer to execute than ::, although it apparently stops parsing early, before the carets are processed. Percent expansion happens before rem and :: are identified, so incorrect percent usage i.e. %~ will cause errors if percents are present. Safe to use anywhere in code blocks.
2)Using labels :, :: or :; etc.
For :: comment, ': comment' is an invalid label name because it begins with an invalid character. It is okay to use a colon in the middle of a label though. If a space begins at the start of label, it is removed : label becomes :label. If a space or a colon appears in the middle of the label, the rest of the name is not interpreted meaning that if there are two labels :f:oo and :f rr, both will be interpreted as :f and only the later defined label in the file will be jumped to. The rest of the label is effectively a comment. There are multiple alternatives to ::, listed here. You can never goto or call a ::foo label. goto :foo and goto ::foo will not work.
They work fine outside of code blocks but after a label in a code block, invalid or not, there has to be a valid command line. :: comment is indeed another valid command. It interprets it as a command and not a label; the command has precedence. Which is the command to cd to the :: volume, which will work if you have executed subst :: C:\, otherwise you get a cannot find the volume error. That's why :; is arguably better because it cannot be interpreted in this way, and therefore is interpreted as a label instead, which serves as the valid command. This is not recursive, i.e, the next label does not need a command after it. That's why they come in twos.
You need to provide a valid command after the label e.g. echo something. A label in a code block has to come with at least one valid command, so the lines come in pairs of two. You will get an unexpected ) error if there is a space or a closing parenthesis on the next line. If there is a space between the two :: lines you will get an invalid syntax error.
You can also use the caret operator in the :: comment like so:
#echo off
echo hello
(
:;(^
this^
is^
a^
comment^
)
:;
)
:;^
this^
is^
a^
comment
:;
)
But you need the trailing :; for the reason stated above.
#echo off
(
echo hello
:;
:; comment
:; comment
:;
)
echo hello
It is fine as long as there is an even number. This is undoubtedly the best way to comment -- with 4 lines and :;. With :; you don't get any errors that need to be suppressed using 2> nul or subst :: C:\. You could use subst :: C:\ to make the volume not found error go away but it means you will have to also put C: in the code to prevent your working directory from becoming ::\.
To comment at the end of a line you can do
command &:: or command & rem comment, but there still has to be an even number, like so:
#echo off
(
echo hello & :;yes
echo hello & :;yes
:;
)
echo hello
The first echo hello & :;yes has a valid command on the next line but the second & :;yes does not, so it needs one i.e. the :;.
3)Using an invalid environment variable
%= comment =%. In a batch file, environment variables that are not defined are removed from the script. This makes it possible to use them at the end of a line without using &. It is custom to use an invalid environment variable i.e. one that contains an equals sign. The extra equals is not required but makes it look symmetrical. Also, variable names starting with "=" are reserved for undocumented dynamic variables. Those dynamic variables never end with "=", so by using an "=" at both the start and end of the comment, there is no possibility of a name clash. The comment cannot contain % or :.
#echo off
echo This is an example of an %= Inline Comment =% in the middle of a line.
4)As a command, redirecting stderr to nul
#echo off
(
echo hello
;this is a comment 2> nul
;this is another comment 2> nul
)
5)At the end of a file, everything after an unclosed parenthesis is a comment
#echo off
(
echo hello
)
(this is a comment
this is a comment
this is a comment