I've been using Vim (MacVim) exclusively for months now, and I love it. Before using Vim though, I used Coda (I'm on OSX), and the one thing I miss about Coda is the way it marks my files for publishing via FTP whenever I edit them. I can then choose to upload the modified files single files individually, or to publish all of them in one go.
Is there anything that will do this or similar in Vim?
I'm aware netrw can edit directly over FTP, but I have all my sites running locally as mirrors of the online sites, so I need to edit locally and publish files remotely as and when I need. I've Googled for solutions but can't find anything.
I'm far more productive in Vim while in the editor, but having to open up an FTP program and hunt and peck to copy across files as I edit them seperately is a real pain, and makes me less productive overall when working on websites when compared to working in Coda.
Any suggestions welcome :)
Transmit, Cyberduck and YummyFTP (the ones I know) all have their own version of "automated folder syncing" where you work locally and any modified files are uploaded on change: you setup an "observer" and never have to hit a special button or shortcut again.
If you want to only use MacVim you could write a little command that uploads the current file on save: a script that would use the current file's path to construct an scp command. But this doesn't seem very portable/practical to me. It appears some people have already written something like that: here and there.
The right way is (not only in my opinion) to:
have everything under some kind of VCS like Git, Subversion or Mercurial or whatever floats your boat
write your code in a local clone/checkout and test the hell out of it on a local server
commit only working code
push milestones to a staging server used by you and your clients to test everything, this part can be automated via a post-commit hook or something like that
deploy only validated changes on your production server.
All the aforementioned Version Control Systems can be used directly from Vim's command line with :!git commit or :!svn update… If you need more abstraction, Fugitive (Git-only) or VCSCommand (multi-VCS, my choice) are here to help.
On your loss of productivity due to uploading files: I think it's very normal because you essentially perform very different tasks with very different neurological needs. This speed bump can also be experienced when previewing a layout change in your browser, looking up a color in Photoshop or any other similar task. I don't know of a way to pilot Photoshop, Chrome's dev tools or Outlook from within Vim and I don't think such a gizmo could reallistically exist so you will probably have to bear with it.
You can try git-ftp - a git based command line ftp client. Then you can manage your project as a Git repository, and git-ftp will only upload the files marked with Git - and only if they have changed.
The downside is that you are going to have to learn Git - and that's a bit overkill for what you need.
The upside is that you are going to learn and use Git.
I have since stumbled upon a Vim plugin which works with Transmit (which I happen to use as my main FTP client) and allows me to upload the current file to the server with a simple keymap (Ctrl+U) as I edit.
This strikes a nice balance between being a very simple solution, and one that does enough of what I need to improve my productivity significantly.
Any more suggestions are still welcome!
Is it possible to write a script that executes certain instructions, and is triggered by any check-in to a CVS repository?
The script would scan the list of files in the change-set and do a copy operation on certain files in a certain sub-directory.
I would hopefully be able to execute various console applications, including ones written in .NET.
Problem is, I need this done quickly and I don't have access to the CVS server, due to corporate IT red-tape, etc.
Is there a way to set this up on one of the client workstations instead?
Can it be done without interfering with my working folder?
Can you get commit notifications by email as this blog shows? If so, you could be able to use maildrop (or good old procmail, etc) to run arbitrary commands and scripts on your workstation when the commit notification mails arrive.
I found a .NET library that seems up to the task - SharpCVSLib.
http://csharpopensource.com/sharpcvslib.aspx
(Hopefully it will work on a developer workstation and not need to be hosted on the CVS server.)
I LOVE using TextMate on my MacBook. It's great.
Unfortunately, I want to edit some files directly on my dev server, since it's difficult to recreate the environment locally. I'm using Git, so one alternative is to just edit locally, git commit, git push, and then git merge, but that's kind of complicated every time I want to make a simple change.
I'd rather just ... use another solution. One thing I tried is mounting a hard drive via MacFusion, and then loading that in an editor. But that's so freaking laggy/slow!
Has anyone cooked up a better solution?
OK - here is the one that works on Mountain Lion.
Go to http://osxfuse.github.com/
Install FUSE for OS X
Install SSHFS for OS X
Then the following commands on your terminal:
mkdir /Volumes/SSHFS
/usr/local/bin/sshfs username#host:/path/to/dir /Volumes/SSHFS
Done.
I would also recommend using the ReMate plugin as pointed out by another user to prevent TextMate from beach-balling every time you refocus it. Link:
ReMate http://ciaranwal.sh/remate
I use Fetch and TextMate for just such tasks. Fetch can be set to use TextMate as an external editor and can even automatically open files in TextMate by double clicking.
Saving the window in TextMate automatically pushes the file back to the server. Of course you would have to commit the changes on the server at a later time.
I'm sure most Mac FTP clients could do the same.
The best thing would be using TextMate's rmate script, follow the link and you'll find the instructions bellow, I recommend it since it will make your life easier and handle all the Nitty-Gritty.
I use the free version of TextWrangler for just this and it works great. I can load and save files over sftp.
The correct answer is to use sshfs and make sure "Perform atomic saves" is checked in the Textmate preferences window. The easiest way to setup sshfs is to use Macfusion. http://macfusionapp.org/.
Try one of these methods.
see: http://wiki.macromates.com/Main/FAQ#projects
also have a look at:
http://www.gnu.org/software/tramp/
You don't need to push every time you make simple changes; git is a distributed version control system, you commit to your local repository for the small changes. You should only push to the remote repository once you finished working on a feature/bug (or for really huge feature, a complete subfeature). Well, that's assuming you can recreate the environment; which apparently you can't.
A decent text editor can have integration with your favorite control version system; if you cannot configure your editor to commit and push from inside your editor, get a decent editor.
An even better editor can be set to save, commit, push, compile, and run your program all in one click or keypress.
If you are not able — for whatever reason — to replicate your environment locally and still want to use TextMate, the FTP client+TextMate combo is the best solution I can think of. MacFusion and all the other similar solutions are neat on the paper but awfully slow.
If you feel adventurous and confident enough to drop the TextMate requirement, SSH+Vim in the terminal works amazingly well.
Are you positive you can't replicate at all your remote environment?
I know this question already has several answers, and it's been a while, but I wanted to also point out DokanSSHFS - This will use SSH to make a local drive of the directory location on the server that you choose. Then you can use your editor of choice to edit the files as if they were on a local disk.
Most of the proposed solutions are centered around sshfs in one form or another. I have tried these solutions, but I found that reliability of filesystem is not always as good as desired.
There is tool called rmate, which allows editing of remote files in text mate.
Use command from ssh session to edit file on the server:
rmate file_name
The readme on github provides easy to follow instructions on how to set it up.
MacFusion is pretty sweet for free - basically ssh-mounting of directories.
http://macfusionapp.org/
Transmit 4 has a similar feature, tho it costs $$.
Try http://ciaranwal.sh/remate/ if it seems slow, as that will disable textmate from refreshing the file list so often.
Use Fuse for OS X http://osxfuse.github.com and the companion package, SSHFS (same URL) and install them. I installed the MacFUSE compatibility libraries from there too, just for good measure.
Then, install http://macfusionapp.org and follow the instructions located here ( https://github.com/osxfuse/osxfuse/wiki/SSHFS ) to configure macfusion to use the newer libraries.
I had trouble getting authenticated with password, so I set up ssh key authentication and used macfusion without password. Works like a charm.
If you do use an IDE, you could just set up an SSH tunnel to your dev server and edit your files from the comfort of your favourite IDE. Saving the files locally would automatically then push the files on the dev server as well
P.S: I am NOT endorsing the use of IDE
You need rmate it works fine to edit files on your server via ssh using TextMate on you local machine.
Github link here
rmate might be another choice. On server side, you type rmate /path/to/file. The file will be transferred to local machine, where you use some editor like Sublime Text or VS Code (TexMate may also work). To use it, one needs to install both server and client.
For server side, there are several ones in various languages. Choose one you like. Here is the Github repo.
On local machine, as far as I know, VS Code and Sublime Text have their extensions to receive files. For VS Code, refer to here. For Sublime Text, refer to here.
On the other hand, Microsoft just announced an official remote editing extension for VS Code (not released yet).
For those remote machines not having ruby or if bash not compiled with /dev/tcp, but has python, this works: https://github.com/scriptmaster/rmate-python
If you have pip:
pip install rmate
or simply:
wget https://raw.githubusercontent.com/scriptmaster/rmate-python/master/bin/rmate
chmod +x ./rmate
mv ./rmate /usr/local/bin/rmate
then rmate /path/to/file
especially if you are in a containerd-os with restrictions (with only python and docker) such as kubernetes-vm or gce-vm
you don't need vs-code-server, atom-editor,
I've just implemented build and deploy process which consists of java files, ant script and cmd files. In the process, a release manager will have to check out source, hit the build.cmd button and then carry a zip file over to a server.
I am wondering if it is worthwhile to make a GUI for it? So that the release manager does not need to check out source manually for example?
How do I start? I have quite limited knowledge of javax, but I very much like to learn.
Thanks,
Sarah
This sounds like something that could be handled by Hudson. It can check out source, run Ant scripts, etc., saving you the trouble of maintaining a GUI. I'd give that a shot before rolling your own.
I have helped develop the build process at my current company. The way we currently do it is with a script file. It checks out the latest code from the stable branch of our repository, performs some steps to get some data from a database (such as static SQL data that needs to be loaded at deployment), then compresses everything. The file is then distributed to our production servers and then the setup routine is executed. Everything is automatic and the script is written in Python. Python is great for these types of things because of the sheer number of libraries it has to help the developer.
Perhaps it may be useful to build a GUI for your deployment procedure -- typically this would be useful if the deployment requires user interaction to make decisions, such as "Which server shall I deploy to?", etc. But, if it's just a matter of doing things automatically, then a script file's the way to go. Choose your favourite language and dive in -- I of course recommend Python.
If you'd like to learn how to make a simple GUI in Java (since that seems to be what your company is familiar with), you should check out the stuff at this site:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
I learned everything I know about Java from that site. The section on GUI programming is great.
Best of luck!
Shad
I am thoroughly in love with TextMate. I program everything in it, including ASP.NET for my daily job. However, I have a license for Espresso, and I was looking at it recently and discovered that there is a "Publish" section that I knew about before, but I didn't know that it could compare my FTP directory with my local directory and publish only the changed files.
Over the past week I've been finding myself using Espresso just for that functionality. However, I was hoping there was a way to get this functionality inside TextMate. I know that you could use an AppleScript script with Cyberduck (my FTP client) to upload a file when it changes, but I have never got that working and it also doesn't include the ability to merge files like Espresso does.
Am I plumb out of luck? Am I stuck using two different programs for the forseeable future?
I haven't tried it, but you should be able to set up a simple rsync command in a bundle in TextMate that will use environment variables from your project to synchronise.
See Using rsync to enable the project drawer in TextMate while working on a remote server for an example.