I have been reading a post already written on this subject, but I can not represent my data since an error appears.
%data.txt:
"Hf" 2233 13.31
"Ir" 2466 22.56
"B_4C" 2763 2.52
"Y_2O_3" 2425 5.03
"Nb" 2477 8.57
"NbN" 2573 8.47
"SrZrO_3" 2700 5.1
"SiC" 2830 3.16
"ZrO_2" 2715 5.68
"Mo" 2623 10.28
"VC" 2810 5.77
"TiB_2" 3230 4.52
"HfO_2" 2758 9.68
"UO_2" 2867 10.97
"TiN" 2930 5.22
"TiC" 3160 4.93
"ZrB_2" 3246 6.085
"ZrN" 2952 7.09
"TaB_2" 3140 11.15
"C" 3549 2.27
"ZrC" 3540 6.73
"ThO_2" 3390 10
"HfB_2" 3250 10.5
"HfN" 3305 13.8
"NbC" 3608 7.82
"Re" 3186 21.02
"W" 3422 19.25
"Ta" 3017 16.65
"WC" 2830 15.63
"TaC" 3880 14.6
"HfC" 3890 12.2
%code:
set terminal postscript enhanced color"Times-Roman" 20
set output "TemperatureVsDensity.eps"
set xlabel "Temperature [degrees]}"
set ylabel " Density [g/cc]"
plot "data.txt" using 2:3 , "" u 2:3:1 w labels rotate offset 1
Can someone help me with this?
Thanks in advance :D
It would be helpful if you can post the error message you got when trying to run your code. I copied your data, code, and ran gnuplot code on the terminal. gnuplot gives the following warning (not error):
"code", line 6: warning: enhanced text mode parser - ignoring spurious }
which tells you that you should remove the spurious } on your set ylabel statement (as pointed out in the comments already). However, that does not prevent the figure to be generated. This is what I got:
Related
I´m just running the following example from GGEBiplotGUI package and of course, it works properly.
library(GGEBiplotGUI)
data("Ontario")
Ontario
GGEBiplot(Data = Ontario)
But when I download "Ontario" data and I want to run the above cited script on my PC. See the example below.
Ontario <- read.csv("Book.csv")
library(GGEBiplotGUI)
GGEBiplot(Data = Ontario)
The result is the following table (from column 0 to 10) taking numbers (From 1 to 17) as genotypes and "X" as another location.
See the result below please.
X BH93 EA93 HW93 ID93 KE93 NN93 OA93 RN93 WP93
1 ann 4.460 4.150 2.849 3.084 5.940 4.450 4.351 4.039 2.672
2 ari 4.417 4.771 2.912 3.506 5.699 5.152 4.956 4.386 2.938
3 aug 4.669 4.578 3.098 3.460 6.070 5.025 4.730 3.900 2.621
4 cas 4.732 4.745 3.375 3.904 6.224 5.340 4.226 4.893 3.451
5 del 4.390 4.603 3.511 3.848 5.773 5.421 5.147 4.098 2.832
6 dia 5.178 4.475 2.990 3.774 6.583 5.045 3.985 4.271 2.776
7 ena 3.375 4.175 2.741 3.157 5.342 4.267 4.162 4.063 2.032
8 fun 4.852 4.664 4.425 3.952 5.536 5.832 4.168 5.060 3.574
9 ham 5.038 4.741 3.508 3.437 5.960 4.859 4.977 4.514 2.859
10 har 5.195 4.662 3.596 3.759 5.937 5.345 3.895 4.450 3.300
11 kar 4.293 4.530 2.760 3.422 6.142 5.250 4.856 4.137 3.149
12 kat 3.151 3.040 2.388 2.350 4.229 4.257 3.384 4.071 2.103
13 luc 4.104 3.878 2.302 3.718 4.555 5.149 2.596 4.956 2.886
14 m12 3.340 3.854 2.419 2.783 4.629 5.090 3.281 3.918 2.561
15 reb 4.375 4.701 3.655 3.592 6.189 5.141 3.933 4.208 2.925
16 ron 4.940 4.698 2.950 3.898 6.063 5.326 4.302 4.299 3.031
17 rub 3.786 4.969 3.379 3.353 4.774 5.304 4.322 4.858 3.382
How can I fix this problem? I mean, in order to avoid "rownames" and "x" as a variables in the GGEBiplotGUI analysis.
I have also tried with these codes and they didn´t work:
attributes(Ontario)$row.names <- NULL
print(Ontario, row.names = F)
row.names(Ontario) <- NULL
Ontario[, -1] ## It deletes the first column not the 0 one.
Many thanks in advance!
This code worked properly.
Ontario <- read.csv("Libro.csv")
rownames(Ontario)<-Ontario$X
Ontario1<-Ontario[,-1]
library(GGEBiplotGUI)
GGEBiplot(Data = Ontario)
I'm using a Windows command line utility called SiteShorter from
NirSoft.net
The problem I'm having is that the images have a border around them.
There is a switch called CutWebPage that I think will trim around the edges, but I can't make it work like I want.
An example of the command lines I'm using:
siteshoter.exe /url http://www.example.com/reportpdf/p2457155140435.html /Filename c:\test\screen1.jpg /BrowserHeight 1000 /DisableScrollBars 1 /BrowserTimeout 1000 /CutWebPage 1 /CutLeft 25 /CutTop 30 /CutWidth 900 /CutHeight 900
My question is how to use the CutWebPage switch correctly. Thanks.
These arguments works for me:
/BrowserWidth 964 /BrowserHeight 484 /ImageSizePerCent 50 /CutWebPage 1 /CutLeft 2 /CutTop 2 /CutWidth 960 /CutHeight 480
Make sure that your 'BrowserWidth' is 4 pixels wider than your CutWidth. Add Cutleft value 2, CutWidth value is [BrowserWidth - 4px] and CutHeight value is [BrowserHeight - 4px].
I want to correct wrong meta data or add missing meta data for the 75 cd's I have ripped from disc.
I got the track info from AllMusic en stripped it to almost usable "CSV" data.
Number";"1";"Piece";"Nocturne for piano No. 2 in E flat major, Op. 9/2, CT. 109";"Componist";"Frédéric Chopin
MainPiece";"";"Piece";"Symphony No. 9 in E minor ("From the New World"), B. 178 (Op. 95) (first published as No. 5)
Number";"2";"Piece";"Largo";"Componist";"Antonin Dvorák
Number";"3";"Piece";"La plus que lente, waltz for piano (or orchestra), L. 121";"Componist";"Claude Debussy
Number";"4";"Piece";"Waldesrauschen (Forest Murmurs), for piano (Zwei Konzertetuden No. 1), S. 145/1 (LW A218/1)";"Componist";"Franz Liszt
MainPiece";"";"Piece";"Oboe Concerto, for oboe, strings & continuo in D minor, Op. 8/9, RV 454
Number";"5";"Piece";"Allegro";"Componist";"Antonio Vivaldi
Number";"6";"Piece";"Largo";"Componist";"Antonio Vivaldi
Number";"7";"Piece";"Allegro";"Componist";"Antonio Vivaldi
MainPiece";"";"Piece";"Cello Concerto in A major, G. 475
Number";"8";"Piece";"1. Allegro";"Componist";"Luigi Boccherini
Number";"9";"Piece";"2. Adagio";"Componist";"Luigi Boccherini
Number";"10";"Piece";"3. Rondò - Allegro";"Componist";"Luigi Boccherini
MainPiece";"";"Piece";"Serenade No. 12 for winds in C minor ("Nacht Musique"), K. 388 (K. 384a)
Number";"11";"Piece";"Allegro";"Componist";"Wolfgang Amadeus Mozart
Number";"12";"Piece";"Liebesträume, notturno for piano No. 3 in A flat major ("O Lieb, so lang du lieben kannst"), S. 541/3 (LW A103/3)";"Componist";"Franz Liszt
MainPiece";"";"Piece";"Phantasiestücke (4) for violin, cello & piano in A minor, Op. 88
Number";"13";"Piece";"Romanze";"Componist";"Robert Schumann
MainPiece";"";"Piece";"Sinfonia Concertante for violin, cello, oboe, bassoon & orchestra, H. 1/105
Number";"14";"Piece";"Andante";"Componist";"Franz Joseph Haydn
I would like to rewrite this with awk to a script to set meta data
eyeD3 -n 01 -a composer -t mainpiece piece 01*.mp3
And with awk to rename the files
mv 01*.mp3 01 [composer] mainpiece piece.mp3
The mainpiece / piece is an manual part but I would like to rewrite 1 to 01.
I found something with printf ("%2d" ,$1,$2) but thins complaints about .mp3
Has anyone suggestions for me?
Below is the line_profiler record of a function :
Wrote profile results to FM_CORE.py.lprof
Timer unit: 2.79365e-07 s
File: F:\FM_CORE.py
Function: _rpt_join at line 1068
Total time: 1.87766 s
Line # Hits Time Per Hit % Time Line Contents
==============================================================
1068 #profile
1069 def _rpt_join(dfa, dfb, join_type='inner'):
1070 ''' join two dataframe together by ('STK_ID','RPT_Date') multilevel index.
1071 'join_type' can be 'inner' or 'outer'
1072 '''
1073
1074 2 56 28.0 0.0 try: # ('STK_ID','RPT_Date') are normal column
1075 2 2936668 1468334.0 43.7 rst = pd.merge(dfa, dfb, how=join_type, on=['STK_ID','RPT_Date'], left_index=True, right_index=True)
1076 except: # ('STK_ID','RPT_Date') are index
1077 rst = pd.merge(dfa, dfb, how=join_type, left_index=True, right_index=True)
1078
1079
1080 2 81 40.5 0.0 try: # handle 'STK_Name
1081 2 426472 213236.0 6.3 name_combine = pd.concat([dfa.STK_Name, dfb.STK_Name])
1082
1083
1084 2 900584 450292.0 13.4 nameseries = name_combine[-Series(name_combine.index.values, name_combine.index).duplicated()]
1085
1086 2 1138140 569070.0 16.9 rst.STK_Name_x = nameseries
1087 2 596768 298384.0 8.9 rst = rst.rename(columns={'STK_Name_x': 'STK_Name'})
1088 2 722293 361146.5 10.7 rst = rst.drop(['STK_Name_y'], axis=1)
1089 except:
1090 pass
1091
1092 2 94 47.0 0.0 return rst
What surprise me is these two lines:
1087 2 596768 298384.0 8.9 rst = rst.rename(columns={'STK_Name_x': 'STK_Name'})
1088 2 722293 361146.5 10.7 rst = rst.drop(['STK_Name_y'], axis=1)
Why a simple dataframe column "rename" and "drop" operation costs that much percentage of time (8.9% + 10.7%)? Anyway, the "merge" operation only costs 43.7% , and "rename"/"drop" looks not like a calculation-intensive operation. How to improve it ?
The gist of my question is this:
How can I display Unicode characters in Matlab's GUI (OS X) so that they are properly rendered?
Details:
I have a table of strings stored in a file, and some of these strings contain UTF-8-encoded Unicode characters. I have tried many different ways (too many to list here) to display the contents of this file in the MATLAB GUI, without success. For example:
>> fid = fopen('/Users/kj/mytable.txt', 'r', 'n', 'UTF-8');
>> [x, x, x, enc] = fopen(fid); enc
enc =
UTF-8
>> tbl = textscan(fid, '%s', 35, 'delimiter', ',');
>> tbl{1}{1}
ans =
ÎÎÎÎÎΠΣΦΩαβγδεζηθικλμνξÏÏÏÏÏÏÏÏÏÏ
>>
As it happens, if I paste the string directly into the MATLAB GUI, the pasted string is displayed properly, which shows that the GUI is not fundamentally incapable of displaying these characters, but once MATLAB reads it in, it longer displays it correctly. For example:
>> pasted = 'ΓΔΘΛΞΠΣΦΩαβγδεζηθικλμνξπρςστυφχψω'
pasted =
>>
Thanks!
I present below my findings after doing some digging... Consider these test files:
a.txt
ΓΔΘΛΞΠΣΦΩαβγδεζηθικλμνξπρςστυφχψω
b.txt
தமிழ்
First, we read files:
%# open file in binary mode, and read a list of bytes
fid = fopen('a.txt', 'rb');
b = fread(fid, '*uint8')'; %'# read bytes
fclose(fid);
%# decode as unicode string
str = native2unicode(b,'UTF-8');
If you try to print the string, you get a bunch of nonsense:
>> str
str =
Nonetheless, str does hold the correct string. We can check the Unicode code of each character, which are as you can see outside the ASCII range (last two are the non-printable CR-LF line endings):
>> double(str)
ans =
Columns 1 through 13
915 916 920 923 926 928 931 934 937 945 946 947 948
Columns 14 through 26
949 950 951 952 953 954 955 956 957 958 960 961 962
Columns 27 through 35
963 964 965 966 967 968 969 13 10
Unfortunately, MATLAB seems unable to display this Unicode string in a GUI on its own. For example, all these fail:
figure
text(0.1, 0.5, str, 'FontName','Arial Unicode MS')
title(str)
xlabel(str)
One trick I found is to use the embedded Java capability:
%# Java Swing
label = javax.swing.JLabel();
label.setFont( java.awt.Font('Arial Unicode MS',java.awt.Font.PLAIN, 30) );
label.setText(str);
f = javax.swing.JFrame('frame');
f.getContentPane().add(label);
f.pack();
f.setVisible(true);
As I was preparing to write the above, I found an alternative solution. We can use the DefaultCharacterSet undocumented feature and set the charset to UTF-8 (on my machine, it is ISO-8859-1 by default):
feature('DefaultCharacterSet','UTF-8');
Now with a proper font (you can change the font used in the Command Window from Preferences > Font), we can print the string in the prompt (note that DISP is still incapable of printing Unicode):
>> str
str =
ΓΔΘΛΞΠΣΦΩαβγδεζηθικλμνξπρςστυφχψω
>> disp(str)
ΓΔΘΛΞΠΣΦΩαβγδεζηθικλμνξπÏςστυφχψω
And to display it in a GUI, UICONTROL should work (under the hood, I think it is really a Java Swing component):
uicontrol('Style','text', 'String',str, ...
'Units','normalized', 'Position',[0 0 1 1], ...
'FontName','Arial Unicode MS', 'FontSize',30)
Unfortunately, TEXT, TITLE, XLABEL, etc.. are still showing garbage:
As a side note: It is difficult to work with m-file sources containing Unicode characters in the MATLAB editor. I was using Notepad++, with files encoded as UTF-8 without BOM.