i am using google cloud platform and i have created an instance from compute engine. i installed apache server and then fresh laravel installation using ssh. All my laravel files exist on this path
var/www/html
but now when i am trying to edit any file its not reflecting. When i access my site using this link
https://project-id.appspot.com/
it only display a fresh laravel installation. not reflecting new changes.
I am using filezilla to update files.
The link you have provided is the URL format used by App Engine applications, not a Compute Engine instance. I believe you may be confusing the two.
To view the changes you have done to the files in a Compute Engine instance, you have to access the external IP of said instance, just as you would with a regular machine or VM.
Therefore, navigate to the Compute Engine section of the Cloud Console and look for the external IP of the Compute Engine instance where you have installed Laravel.
Related
I have created a compute engine VM-instance in Google Cloud Platform. Then I have installed go using the standard procedure downloading it from https://dl.google.com/go/go1.11.4.linux-amd64.tar.gz. Everything worked properly and I was able to run go application. However, after closing the instance when I reopened it, it says go is not installed. The message is following.
-bash: go: command not found
How can I save the instance setup?
Creating, Deleting, and Deprecating Custom Images
You can create custom images of boot disks and use these images to create new instances. This is ideal for situations where you have created and modified a persistent boot disk to a certain state and need to save that state to create new instances.
I think you should also consider using Docker containers.
Pushing and pulling images
Container-optimized VM images
I have installed a Joomla site with CF on bluemix.
As you know Joomla as other CMS allows to install components for adding functionalities.
This uploads the php code needed for the component and add additional tables/entries in the Database.
My issue is that when I CF PUSH, the new component script is removed from the joomla folders on bluemix, and the database still contains component's tables/entries.
I guess this is the situation for all CMS (Drupal, Wordpress, Joomla, Vbulletin, etc..).
How could I get a kind of CF PULL (?) to keep the modified CMS code including the new component locally on the computer side ?
So when i will redo the CF PUSH the installed component will not be erased.
Thank you in advance for your support,
Best regards
Yves
There is no cf pull command in Cloud Foundry. The closest you would have is the cf files app-name command that you can navigate the directory structure of your cloud application and get specific files as needed, but this would be really tedious if you have multiple files to copy to your local computer.
It looks like Joomla fits better with the IBM Containers service in Bluemix. With the IBM Containers you can have an Docker image from Joomla (https://hub.docker.com/_/joomla/) and use persistent Volumes to save your added functionality. You can also use any Bluemix services (like a database) with IBM Containers.
The article below provides more details and step by step instructions to create an IBM Container for Wordpress. You can easily modify it for Joomla:
http://blog.ibmjstart.net/2015/05/22/wordpress-on-bluemix-containers/
When you push an application on a runtime, php Java or whatever, it will restage all the application sources, included what has been configured and modified before through the cms interface, leaving the db databases untouched. And it is for joomla, but also for drupal or WP or any other cms. By this way to achieve what you wish you have 3 options:
- push exactly the filesystem structure you need on Bluemix, including the configuration files and modules to use on it
- use (as suggested above) a container instead of a runtime: anyway also with a container you have to install your cms on an external docker volume, otherwise the cms will be reset every time you restart the container
- use a Bluemix VM
I have a website build using Codeigniter Framework. I already uploaded it in a web server, TurnKey Lamp in Linux using Git Bash.. I can access it already since it is networked.. What I want now is to make it visible on internet.. How can I do that?
I am new windows azure user. I have gotten selected for 90 days trial account and I am able to upload my ASP.NET MVC3 application to my account. My site is also running now. After I did publish my site, I added more model, views and controller to my proramme. Now I can not find a way to update my application. I can again publish my application but update option is not there. I want to update my new code only but the package option is creating full application. How I can update the new code to my site in windows azure cloud?
[Changed spelling]
With Windows Azure you can publish/update an application following ways:
Log into you Windows Azure account. Select you hosted server name and at the top panel you will see "Upgrade" option, when you will use this option you will be given a chance to select your CSPKG and CSCFG file from local file system or from Windows Azure storage. Once you selected new or updated CSPKG, your current running service will bee upgraded.
You can also use Windows Azure PowerShell Cmdlets to upgrade your current running hosted service using "Update-Deployment" command:
2.1 http://wappowershell.codeplex.com/
You can other 3rd party applications created using Windows Azure Service Management API to upgrade/manage your current running hosted service.
3.1 http://wapmmc.codeplex.com/
3.2 http://www.cerebrata.com/Products/CloudStorageStudio/Default.aspx
Note: With Visual Studio if you again publish your application, it will delete the current running hosted service and then create the new on so for update it is not the good one.
Finally based on your question about partial update, that is not supported. Even when you make a single line change in your code the deployment will be considered a full deployment even when the action is "update/upgrade". There is no diff package deployment so evertime you update your Windows Azure application, you will use the newly created CSPKG file and upgrade your hosted application.
Regarding partial update: If you have multiple Roles, you may choose to upgrade a single role (so that would be a partial update of the deployment). For a given Role, all code is redeployed. If you're running more than one instance, the update will be rolled out across groups of instances, not all instances at once.
For updates such as static content: if you move these into blob storage (a great place for css, jquery, images, etc.), then you may update this content by simply uploading new items to blob storage individually. These updates don't require any code to be rebuilt or redeployed.
If you're in dev mode (e.g. non-production), you may enable Web Deploy, which then allows very fast updates of your app to the running instance. This only works in single-instance mode, and it's great when doing frequent code+test cycles.
I have ColdFusion Builder 2.0.0 installed and I am trying to look at the much vaunted step debugging. However, I cannot seem to get it to work as I don't have my site / JRun install setup in the naive way the examples show.
I am using version 9,0,1,274733 of ColdFusion and my configuration is as follows:-
Installed as multi-server version with Jrun here:- c:\Apps\JRun4
application files are here:- d:\websites\my.website.com
web root is here d:\websites\my.website.com\www
core library of CFCs is here d:\websites\frameworks\core which is mapped in CF as core
I have read this watched this http://help.adobe.com/en_US/ColdFusionBuilder/Using/WS0ef8c004658c1089-31c11ef1121cdfd6aa0-7fff.html and this http://forta.com/blog/index.cfm/2007/5/30/CF8-Debugger-Getting-Started and watched this https://experts.adobeconnect.com/_a204547676/p33029638/?launcher=false&fcsContent=true&pbMode=normal but I get stuck at the point after you have configured RDS and you are setting up the server for your project.
Now I am pretty sure the above is correct, when I move to the next page in the wizard I get the following:-
Now I as I understand it my Server Home should be c:\Apps\JRun4 and my Document root should be d:\websites\my.website.com
This all looks like it is going to be fine until you actually try and debug when I get
followed by
I can confirm that the server is running and RDS is enabled as in the RDS Dataview I can see all my databases.
Any help would be gratefully received as this is very frustrating and the documentation is very lacking.
There is a video tutorial as well that you may want to check and see if that helps. http://blogs.adobe.com/anand/2011/01/learn-how-to-debug-coldfusion-applications-using-coldfusion-builder-2.html
You need to specify the RDS username/password and the "application server name". If you are using the base instance that was installed when you setup the multiserver install of CF that is "cfusion", otherwise its the name of the instance you are using.
The RDS username is most likely "admin" unless you setup custom users for RDS. The password is the RDS password you specified when you installed CF.