I am aware that command + ' brings you to the next issue, but is there a way to bring you to the next compiler error and ignore the warnings?
(xcode 9)
I don't think there is a way to do that, but the closest thing you could do to that is to filter the display of issues in the Issue Navigator so it only shows errors and no warnings. Do that with one click, on the icon at the bottom right of the Issue Navigator.
Once you have done that, then the up and down arrow keys navigate you within the Issue Navigator from error to error instead of issue to issue.
To expand on auspicious99's answer, after filtering on errors in the issues pane, you can use keyboard shortcuts end to end:
cmd-5 - selects the issues pane
up/down arrows - select the error you want
cmd-j, enter - move the focus to the editor
In the navigator (the left-hand pane), choose the right-most icon that looks like a speech bubble. You'll see the build results, and when you click on them you'll be taken to the error.
I am attempting to debug my project in GNAT's GPS IDE. Every time I chose Debug->Initialize->"program name" the gui of GPS switches to that of the debug GUI, and then an error pops up with "could not initialize the debugger".
The two possible solutions I have found are that gdb.exe may be out of date and it suggests running it outside of GPS, which it does run fine. The other possible solution is to make sure the -g tags are applied when building the project, as those are necessary for gnatlink and gcc for debugging. It also states that the -g tag is applied to a new project by default, unless you have specifically removed it. I doubt I have, but I am not sure where I would check that to make sure it is still included.
The other odd thing is that the tutorial that comes with GPS that runs through how to build and debug your code works perfectly fine when I initialize debugging on it. That tutorial I am referring to can be accessed through Help->GPS->GNAT Programming Studio Tutorial. It references the program 'sdc' which comes in the GNAT/2012/share/examples/gps/tutorial directory.
Any ideas on what I am doing incorrectly, since the error isnt very helpful?
Thanks!
At first it sorta sounds like a path problem, but if you're able to run a debugger tutorial that's probably not the case.
The behavior you're seeing if the program isn't compiled with the debug (-g) flag doesn't quite match my experience, but let's go ahead and check/set the debug flag anyway.
Select Project/Edit Project_Properties
Click the Switches tab.
Click the Gnatmake tab.
Check "Debug information". Note that a -g now shows up in the text box at the bottom of the tab page. Click OK on the dialog.
Recompile your code so that it uses the changed option. Select Build/Clean/Clean All, and OK any dialog that pops up.
Then do your build (you can just press F4).
Hey this is a small issue with XCode 4 that is annoying me. When i click on warnings or compile errors on the left hand panel, I am not taken to where the error is on the code. This used to work in XCode 3.x but no more.
Anyone else seen this?
Ive found a way that works more often than not...
In the left hand panel, click on the "Show the log navigator", its the button which looks like a speech bubble. Now underneath will show the logs for every build. This is like the old Xcode, and will show errors/warnings. When you double click on the errors it will open the file to the line of the error.
I had this same problem and fixed it by switching the compiler from LLVM GCC 4.2 to LLVM Version 2.0.
I have breakpoints set but Xcode appears to ignore them.
First of all, I agree 100% with the earlier folks that said turn OFF Load Symbols Lazily.
I have two more things to add.
(My first suggestion sounds obvious, but the first time someone suggested it to me, my reaction went along these lines: "come on, please, you really think I wouldn't know better...... oh.")
Make sure you haven't accidentally set "Active Build Configuration" to "Release."
Under "Targets" in the graphical tree display of your project, right click on your Target and do "Get Info." Look for a property named "Generate Debug Symbols" (or similar) and make sure this is CHECKED (aka ON). Also, you might try finding (also in Target >> Get Info) a property called "Debug Information Format" and setting it to "Dwarf with dsym file."
There are a number of other properties under Target >> Get Info that might affect you. Look for things like optimizing or compressing code and turn that stuff OFF (I assume you are working in a debug mode, so that this is not bad advice). Also, look for things like stripping symbols and make sure that is also OFF. For example, "Strip Linked Product" should be set to "No" for the Debug target.
In Xcode 7, what worked for me was:
Make sure that the Target > Scheme > Run - is in Debug mode (was Release)
Make sure to check the option "Debug executable":
Go to the Xcode Debugging preferences.
Make sure that "Load Symbols lazily" is NOT selected.
I was just having this same issue (again). After triple-checking "Load symbols lazily" and stripping and debug info generation flags, I did the following:
quit Xcode
open a terminal window and cd to the project directory
cd into the .xcodeproj directory
delete everything except the .pbxproj file (I had frank.mode1v3 and frank.pbxuser)
You can accomplish the same task in finder by right/option-clicking on the .xcodeproj bundle and picking "Show Package Contents".
When I restarted Xcode, all of my windows had reset to default positions, etc, but breakpoints worked!
One of the possible solutions for this could be ....go to Product>Scheme>Edit scheme>..Under Run>info>Executable
check "Debug executable".
For Xcode 4.x:
Goto Product>Debug Workflow and uncheck "Show Disassembly When Debugging".
For Xcode 5.x
Goto Debug>Debug Workflow and uncheck "Show Disassembly When Debugging".
Another reason
Set DeploymentPostprocessing to NO in BuildSettings - details here
In short -
Activating this setting indicates that binaries should be stripped and
file mode, owner, and group information should be set to standard
values. [DEPLOYMENT_POSTPROCESSING]
See this post: Breakpoints not working in Xcode?. You might be pushing "Run" instead of "Debug" in which case your program is not running with the help of gdb, in which case you cannot expect breakpoints to work!
Issue
Background
Xcode: 13.0
code: Objective-C
Issue: added breakpoint, but not work
(possible) Reason and Solution
Reason: Xcode bug
Solution: Product ->Clean Build Folder, then retry debug (multiple time)
Reason: disabled Debug
Solution: enable it: Product->Scheme->Edit Scheme->Run->Info
Build Configuration set to Debug
choose/select/enable: Debug executable
Reason: disabled all breakpoint
Solution: enable it: Debug panel -> click breakpoint icon
Reason: debug info be optimized
Solution: not optimize
click Project -> Build Settings -> Apple Clang - Code Generation -> Optimization Level -> Debug make sure is None[-O0]
Related
XCode's Symbolic breakpoint not work
Background
XCode crash log
Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[__NSCFConstantString stringByAppendingString:]: nil argument'
add XCode symbolic breakpoint
-[__NSCFConstantString stringByAppendingString:]:
but breakpoint not working
Solution
change to:
-[NSString stringByAppendingString:]
related doc: stringByAppendingString:
Solution for me with XCode 9.4.1 (did not stop at any breakpoint):
Under build Target -> Build Settings -> Optimization Level:
Switched from "Optimize for speed" -> "No optimization" (now it's slower but works)
What solved it in my case was quite simple, in Xcode - Product - Clean Build Folder followed by Product - Run (not the Play Xcode button).
(Had the issue on Xcode 11 -beta 4 after switching to unit testing with Xcode play button long press)
This had me in Xcode 9 for half a frustrating day. It ended up been a simple debug setting.
Go Debug > Debug Workflow and make sure 'Always Show Disassembly' is turned off. Simple as that. :(
Came to this page with the same problem (C code in Xcode 6 not stopping at breakpoints) and none of the solutions above worked (the project was practically out of the box, settings-wise, so little chance for any of the debugger settings to be set to the wrong value)...
After wasting quite some time reducing the problem, I finally figured out the culprit (for my code):
Xcode (/LLVM) does not like Bison-style #line preprocessor commands.
Removing them fixed the problem (debugger stopped at my breakpoints).
For Xcode 4:
go Product -> Debug -> Activate Breakpoints
This is applicable for all Xcode version. Shortcut key is: command key + Y. Press this key combination to activate/deactivate breakpoints.
I have a lot of problems with breakpoints in Xcode (2.4.1). I use a project that just contains other projects (like a Solution in Visual Studio). I find sometimes that breakpoints don't work at all unless there is at least one breakpoint set in the starting project (i.e. the one containing the entry point for my code). If the only breakpoints are in "lower level" projects, they just get ignored.
It also seems as if Xcode only handles breakpoint operations correctly if you act on the breakpoint when you're in the project that contains the source line the breakpoint's on.
If I try deleting or disabling breakpoints via another project, the action sometimes doesn't take effect, even though the debugger indicates that it has. So I will find myself breaking on disabled breakpoints, or on a (now invisible) breakpoint that I removed earlier.
I've had my breakpoints not work and then done Build / Clean All Targets to get them working again.
I think the problem could be incompatibility between device versions and Xcode. I have this problem when attempting to debug on my iPhone 4S running iOS 5.0.1. I am still using Xcode 3.2.5. I got the symbols from the handset by selecting "use this device for development" in the Organiser window. This phone refuses to breakpoint however. My old 3GS will breakpoint, same Xcode project, same settings... just different device and it's running iOS 4.0. I guess this is an Xcode bug in 3.2.5, since I have the symbols. Having tried all the solutions posted here so far, I have decided the solution to my problem is to go ahead and upgrade to XCode 4. Perhaps you cannot debug effectively unless your base SDK is at least as high as the system on which to debug. Maybe that's obvious - can anyone confirm?
Edit: I will update when I can confirm this is true.
Deleting my Build folder solved the problem for me.
If all else fails, instead of a breakpoint, you can call the following function:
void BreakPoint(void) {
int i=1;
#if !__OPTIMIZE__
printf("Code is waiting; hit pause to see.\n");
while(i);
#endif
}
To resume, manually set i to zero, then hit the resume button.
It has happened the same thing to me in XCode 6.3.1.
I managed to fix it by:
Going to View->Navigators->Show Debug Navigators
Right click in the project root -> Move Breakpoints (If selected the User option)
(I also Selected the option share breakpoints, even though I'm not sure if that necessary).
After doing that change I set the Move breakpoints options back to the project, and unselecting the Share breakpoints option, and still works.
I don't exactly know why but this get my breakpoints back.
For this, and also for Xcode 6 and above make sure that the breakpoint state button is activated (the blue arrow-like button):
In Xcode 4
- Product menu > Manage Schemes
- Select the scheme thats having debugging problems (if only one choose that)
- Click Edit button at bottom
- Edit Scheme dialog appears
- in left panel click on Run APPNAME.app
- on Right hand panel make sure youre on INFO tab
- look for drop down DEBUGGER:
- someone had set this to None
- set to LLDB if this is your preferred debugger
- can also change BUILD CONFIGURATION drop down to Debug
- but I have other targets set to AdHoc which debug fine once Debugger is set
I found the problem. Somehow the "Show Disassembly when debugging" was enabled in my XCode which creates that problem. When I disabled it, all my debugger stopped in my source code.
You can find it under: Product->Debug Workflow->Show Disassembly when debugging.
You can Activate / Disactivate Breakpoints in dropdown menu
I tried all the above things but for me only deactivating the debugging breakpoints once and then activating them worked.
When setting your break point, right click and you should get several options about how the break point is handled (log vars and continue, pause execution, etc)
Also make sure the "Load Symbols lazily" is not selected in the debug preferences.
(Applies to Xcode 3.1, not sure about past/future versions)
Also make sure that the AppStore distribution of the app is not also installed on the device.
Another thing to check is that if you have an "Entitlements" plist file for your debug mode (possibly because you're doing stuff with the Keychain), make sure that plist file has the "get-task-allow" = YES row. Without it, debugging and logging will be broken.
There appears to be 3 states for the breakpoints in Xcode. If you click on them they'll go through the different settings. Dark blue is enabled, grayed out is disabled and I've seen a pale blue sometimes that required me to click on the breakpoint again to get it to go to the dark blue color.
Other than this make sure that you're launching it with the debug command not the run command. You can do that by either hitting option + command + return, or the Go (debug) option from the run menu.
I have Xcode 3.2.3 SDK 4.1 Breakpoints will fail at random. I have found if you clean the build and use the touch command under build they work again.