I am trying to install GoCD Server 19.1.0 64 bit on my Windows 10 64 bit machine. Installation went through without any issue, however, I am getting the following error on starting Go Server service.
I tried to run service under Local System Account as well as specific admin account but not luck so far.
I also tried setting NoInteractiveServices registry from 1 to 0 (at \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows) but still getting the same error.
Please let me know if any of you have faced this error and know the solution.
Services
The Go Server service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
OK
Thanks in advance,
ND
You should look at GoCD's Log files to find out what happened, and why GoCD stopped.
Thanks #moritz for the info. I did not find any files under logs folder as it was failing with Access Denied error while writing to logs files. Not sure what was the reason behind that but this is how I fixed it.
I re installed the Go Server, this time I have selected C:\Program Files (instead of default C:\Program Files (x86)) and selected Open Java instead of providing path of JRE installed locally.
This worked in my case, however, feel free to let me know if you see any problem in this approach.
ND
Related
In my organization a project has begun to install SCCM on every computer. My job is to filter out computers which do not have SCCM installed on them (that part is done), find out why and try to install.
Unfortunately, I’m inexperienced with SCCM logs and find it hard to locate the problems (if there are any) and there is a huge number of devices I have to check all by myself and accessing each computer’s C$ will take years.
The OS of the problematic computers are Windows 10/7/XP/Server 2016.
Can anyone help me with these issues please?
Thanks in advance
The client install logs on the local machine are here C:\Windows\ccmsetup\Logs. You could script something to pull the logs and dump on a network share.
You can pull the CMTrace.exe from the server install directory to read the logs.
They are most likely failing for the same reason, I would start with looking at the firewall and make sure WinRM is enabled.
There are 3 methods to installing the agent GPO, Login Script, or from the console.
I keep getting this error:
Error 1061: The service cannot accept control messages at this time
This happens when I attempt to stop the service installed using InstallUtil from this location: C:\Windows\Microsoft.NET\Framework\v4.0.30319\InstallUtil.exe
I am attempting to debug the windows service in question. My problem is that everytime I attempt to introduce changes to the codebase, the computer "A physical machine - Dell Precision T3500" requires that I restart the entire machine to completely uninstall the service, before I do a reinstall.
I have looked at this Link and it is not helpful in my scenario as I would first have to stop the service to be able to gain full access to the location where my build is generated to.
Whilst the service is attempting to restart before I do the restart of PC, when I attempt to build the service from my code, I get this interesting error from the compiler:
Error 16 Unable to copy file
"obj\x86\Debug\X_WindowsService.exe" to
"bin\x86\Debug\X_WindowsService.exe". The process cannot
access the file 'bin\x86\Debug\X_WindowsService.exe' because
it is being used by another process. X_WindowsService
Because of the error above I also think this is why I am not able to use the SO solution from here.
Does anyone have a clever idea for me to go through to bypass having to restart the machine as I debug and make changes to my codebase?
I also had a look at this link from SO but it has no marked solution, I also tried one of the Microsoft forums for a solution but it too has no applicable solution as they recommend the restart which I am trying to avert.
I feel so silly after finding this solution. I should most certainly have used the KISS principle for this one.
Turns out, all I had to do was look for the service's process from task manager and simply end the task. After that a refresh to my services list shows the service status as blank, meaning it has completely stopped without a restart of the machine.
I am having below mentioned issue when I am running Asp.Net MVC 2 project on windows Azure emulator (dev environment)
I have installed Windows Azure SDK for .NET - October 2012 version and I am using cache feature on my system.
With above error Below one is also comming.
How to get rid of this ?
Maybe I have an stupid solution, but that works with me.
When I begin to recieve the message "CacheInstaller.exe has stopped working", I do the following:
1) Stop the execution.
2) Go to the Role I'm using in the Azure project and open the corresponding Properties page.
3) Go to the "Caching" section and there I uncheck the "Enable Caching" checkbox. After that I checked again.
4) Save*, Run de application and never the warning appear again.
Is weird because nothing should change if you uncheck and check it again an option without save in the middle, but in this case when you do that the file changes (I can see it in the red icon that said something change there, :P)
I hope this helps. Cheers.
Do you have any error messages in the event log that may give more hint.
It could be an issue with missing dlls, do you have the windows server appFabric installed as well on this machine, which may be leading to a conflict with the dlls?
A procmon log might help you see what file paths its looking for.
"http://technet.microsoft.com/en-us/sysinternals/bb896645"
I banged my head against the wall on this one as well. I finally figured out the problem after digging deep into the crash-dump logs located within: C:\Users\{YOU}\AppData\Local\dftmp\Resources\{GUID}\directory\DiagnosticStore\AzureCaching\
AzureCaching does not allow UNC paths.
As my primary .net dev is from a vm, my documents/projects drive is mapped to my native drive located at: \\psf\Home\Documents\... Once I moved the project to the vm c:/ drive, CacheInstaller worked as intended.
Might as well post my experience as I was unable to locate anything on this specific problem.
I found today that if my system time was more than about 10 minutes wrong then CacheInstaller.exe bailed out on starting the emulator.
That includes the combination of system time and timezone being wrong, presumably as it results in an inability to calculate the correct UTC time at which Azure operates. Fixing the system clock resolved the issue in my case.
I suddenly cannot start IIS anymore on my Windows 2008 R2 server. The depending "Windows Actication Service" does not start.
In the Event Viewer I can see the following message:
"The Windows Process Activation Service failed to generate an application pool config file"
I've checked all IIS config files for typo's, none can be found.
I've tried to remove the IIS role from the server, which results in an error.
I'm totally desperate here. I've looked on Google for several hours, but none of the suggestions I've found helped.
Something has messed up permissions and the user account under which WAS runs does not have permission to create its working files. Probably you installed a service pack or similar.
Rebuild the box and apply all service packs to Windows before you install WAS, and then let it update itself and then install your own stuff.
Rebuilding boxes is no fun and takes far too long. Learn to use virtualisation and undo disks.
If you have another working server, you can import IIS configuration from there via Shared Configuration. I was able to resolve this error by doing so.
I am trying to create a dev box for SharePoint 2010 Server utilizing the following:
http://blogs.msdn.com/b/cjohnson/archive/2010/10/28/announcing-sharepoint-easy-setup-for-developers.aspx
So first of all this is new to me. I understand that these are instructions are for dual boot in Windows Native, but I am more interested in using a VHD/image of the OS to run on VMWare.
I have tried creating an image of a running virtual machine with sysprep tool, but hit a dead end with capturing the image to a file that I can reference within the running machine to run the scripts against.
I took a look at Diskpart on TechNet, but as I am new to this, I am not sure this is what I want to do?
I tried installing to the local host (virtual machine that is running) and am getting an error there also; fails at Windows Identity Framework.
It is a clean install of Windows 7 (literally nothing else), and the UAC has been disabled.
Is there any insite, help, or advice anyone can provide me regarding this? I would really appreciate it as I have to get working on the development aspects of SP (workflows, web parts,etc), and need a dev env, and I can't seem to get anywhere with this.
Thanks
Justin