Is there a way, either built-in or by third-party extension, to disable triple-click from selecting the entire line while in a text editor? Either my mouse is too sensitive, or I'm inadvertently doing it, but more often than not, clicking a word, then copy / pasting it results in pasting of the entire line -- not my intention and very annoying. Ideally, it could be disabled (aka any click more than 1 just selects the word the cursor is over)
As already stated in the comments the problem is most likely that the word highlighting color is so similar to the color of selected text. So seems like we sometimes deselect a word instead of selecting it. And without a selection Ctrl-C copies the whole line. I had the same issue with JetBrains WebStorm. In Visual Studio for me it was ReSharper.
Changing the color helps. Tools -> Options -> Environment -> Fonts and Colors -> "ReSharper Usage of element under cursor". I made that darker such that selected text is clearly distinguishable.
Related
Initial note: I'm not getting any responses over on superuser to my question, so please allow me to ask this here:
I inherited a VS solution with a bunch of unorthodox settings. I'm not at liberty to wipe out all those settings and start over. So there is 1 setting I want to change back to VS default but cannot find it.
In a normal/default VS c# environment, when you click the mouse on a line of code that hasn't been written yet (empty, no spaces, no code, no tabs), the cursor automatically positions to the beginning of where the line of code should begin. If it's just inside a foreach, if, or etc, it will indent a bit from the left edge according to tab rules, etc.
But in the weird VS settings I have, wherever I click, the cursor positions at that exact spot. So if I click on col 20 of the next line, the cursor remains at col 20 rather than auto-repositioning to col 5 or wherever it should be. This is SO annoying because I can't always eyeball where the cursor should be and I end up clicking at the end of the previous line, then hitting ENTER, at which time it goes to the next line and positions the cursor at the right place.
How can I fix this?
It is controlled by the Enable virtual space option. See Visual Studio options - Text Editor - C#. By default it is off/unchecked.
I resolved this issue by applying Sergey's suggested change (Visual Studio options -> Text Editor -> C# -> Enable Virtual Space [check]), but also enabled (Options -> Text Editor -> C# -> Tabs -> Smart).
In Eclipse, there are two distinct features: one to format a selection, one to just indent the lines, see e.g. Difference between Ctrl+Shift+F and Ctrl+I in Eclipse. I found the format feature in Visual Studio but how can I actually just indent the lines? Is there some built-in command for that or possibly a 3rd party add-on?
Note: I have asked a couple of friend that use VS daily and they all tried to persuade me that I am looking for the format feature. No I'm not. I tried to live with it for a while and it is just a different feature. I am after the indent/reindent only.
EDIT: I am looking for a clever indent, sometimes called reindent, which is different to just pressing Tab or Shift+Tab (increase/decrease indent level). The indent feature in Eclipse behaves like this:
It places a beginning of current line at the right position, no matter where that line was starting before. So instead of thinking whether you need to increase or descrease the indent level (Tab or Shift+Tab), you just invoke the indent command and it will do the right thing.
Invoking the indent command on an empty line places the caret at the right position for the user to start typing.
It never influences any character beyond the first non-whitespace character.
If you just want to indent some lines, you can
Select them.
Press Tab.
To un-indent them, replace the second step to: Shift+Tab.
You can find more VS shortcuts here.
There are toolbar buttons for this, with wonderfully inconsistent labels (at least in the Visual Studio 2013 I'm using)...
In the "Text Editor" toolbar (in my default setup), I have to buttons whose tooltips are:
"Decrease Line Indent"
"Increase Line Indent"
In the "Customize" dialog, on the "Commands" tab (with "Toolbar" set to "Text Editor") they appear in the list as:
"Line Unindent"
"Line Indent"
And finally, if you press the "Add Command..." button (on the "Customize" dialog) to produce the "Add Command" dialog and select the "Edit" category, you'll see these two entries:
"Outdent"
"Indent"
As far as I can tell, these are all the same two commands, which should do what you want.
They also appear in the Edit -> Advanced menu, at the very bottom.
----- Edit -----
I believe you might be able to turn off all of the "formatting" actions except for indentation, so that when you use the "auto-format" command, only the indentation is "formatted" for you. (Of course this prevents you from ever using the rest of the formatting features without turning them on again, but if you don't use them, this might work!)
I would like to show a vertical line, next to the linenumbers, in my visual studio 2010 between parentheses when my courser is between those 2 parantheses.
I alread had that option enabled, but somehow its gone.
edit: is nobody using that feature? one of the very nice things when you are debugging
Is no one using that feature??
Edit: so last push!! there must be a way to see where the space between parentheses starts and ends.
edit: here is an image
EDIT: I still haven't found what i'm looking for. VS is so powerful there must somewhere an option or a plugin. It is really useful when you can see where your { begins and ends }.
Anyone a clue?
I haven't seen the horizontal line feature since 2008. I hated it so I haven't been looking for it either.
You should however be able to see the braces being highlighted when your cursor is on them. If not, perhaps you've changed your theme or possibly some colors in your Options menu.
Here's what you should try:
Tools ->
Options(down at the bottom of the drop-down) ->
Environment ->
Fonts and Colors
Make sure the Show settings for: selector is showing Text Editor.
The one(s) you're looking for are Brace Matching (Highlight/Rectangle).
Attempt to change it to your choosing and see if the changes take place. If not, reset to the defaults and re-check it's enabled.
Also...
Another suggestion that can be handy to get a temporary look at the extents of the body you can hover your mouse just along the margin it will highlight the most nested body. You may have to do some tweaking of your colors to make it vibrant. I use a darker color and have my code block highlighting white. I know it's not what you're looking for but it might be somewhat of a band aid.
I am using Resharper 6.x with VS2010. One of the features is that if you double click on a variable, it is highlighted and then other usages of the variable are highlighted, like so:
The background and foreground colors of the highlighted variable are too close to each other and I am trying to change it in the Options/Fonts and Colors dialog. It has a small Sample window (below). I've gone through the entire list of display items and can't find the one matching what I see in the coding window.
So 2 questions:
Which display item should I change to affect the back/fore colors of the highlighted variables?
Is there some tool that that will point me to the display item in question for any piece of code?
P.S. I am using the Ragnarok as my base color theme.
P.P.S. This may have nothing to do with Resharper. I turned it off and the coloring was still there. I guess my original question still stands - how to affect the colors of the highlighted variables.
Visual Studio 2010 Reference Highlighting
As you already presumed: The reference highlighting of current selection is not a ReSharper feature but a VS 2010 feature. So you need to look at VS items in Fonts and Colors dialog.
The right display item is Highlighted Reference.
ReSharper Reference Highlighting
ReSharper's equivalent is Highlight usages in file by pressing Shift+Alt+F11.
Then all read references have light blue background color (related display item in Fonts and Colors dialog is ReSharper Read Usage).
And all write references have rose background color (related display item in Fonts and Colors dialog is ReSharper Write Usage).
But the disadvantage of ReSharper's reference highlighting is that you need to press a shortcut. VS does the highlighting automatically.
When Visual Studio (2005) has Options -> Text Editor -> C/C++ -> Tabs -> Indenting set to Smart it will automatically indent code blocks and line up squiggly brackets, {}, as expected. However, if you hit enter inside a code block, move the cursor to another line, and then move it back, the inserted tabs are gone and the cursor is positioned all the way to the left. Is there a way to set Visual Studio to keep these tabs?
As far as I know, the only way to do that is to enter something (anything) on that line, then delete it. Or hit space and you'll never see it there until you return to that line.
Once VS determines that you've edited a line of text, it won't automatically modify it for you (at least, not in that way that you've described).
This is an annoyance to myself as well. Anytime the code is reformatted the blank lines are de-tabbed.
You might look at this: http://visualstudiogallery.msdn.microsoft.com/ac4d4d6b-b017-4a42-8f72-55f0ffe850d7 it's not exactly a solution but a step in the right direction