Good afternoon!
I have created a report with the wizard to create a matrix that is grouped and has drill down rows. I have added filters to the rows and columns and it works great! I then copied that matrix and modified the filters, so I had two matrixes.
But what I really wanted was those two rows in the same matrix, just in different row groups. So I added another group, using the adjacent below option, and then added all the child groupings. However, when I run the report it shows the values for the first row of the drill down data.
When I look at the groupings I can see the one I did manually has a 'Static' field in each row grouping but the ones that the wizard did (with the red ?), they don't have that "extra" row:
What do I need to change or how do I need to add my groups so that I don't get that "static" row and not show the data? I have the visibility set to 'Hidden' and the toggle set up for the prior grouping set data.
Assuming a few things....
the data comes from a single dataset
You are differentiating between Property and Violent crimes by filtering on a column, I'll call it IncidentGroup for the sake of illustration..
I've understood your question ! :)
Get to the point where you had just a single tablix filtered to show 'Property crime'.
Now remove or edit that filter so it shows all the data you need in the report.
Finally, right click on your Matrix1_IncidentCategory row and add a parent group, choose IncidentGroup (or whatever the column is actually called) and check the box to add a group header.
That should be it, there is no need for a second tablix.
Without knowing how you are filtering currently it's hard to give a complete answer but this should get you close, if not all the way there.
If this doesn't work for whatever reason, please post sample data from your dataset output and your current filters.
Related
I am working on a BIRT report. Its records are grouped on the basis of the status column. I was looking for an option in the Eclipse BIRT tool by which I can hide combinations of multiple columns in a row which are repeating. I have attached screenshots for both the current report and the expected report structure.
I tried the "suppress duplicate" option but that is limited to a single column. I am not able to apply this on multiple columns together. I couldn't figure out any other option. Please suggest any solution in the tool or do I need to change my query to return the result in the expected format?
Actual Result:
Expected Result:
There are three obvious ways to hide duplicate values.
All of these require you to configure this per column (BTW I don't understand why you consider this to be a problem).
As you already did: Use "suppress duplicates" at the column level.
Add more groups to your table after the existing group.
E.g. one group for the first column (whatever that is).
Then you can choose "Drop" "detail" in the properties of the corresponding group header cell. It's a bit difficult to get the layout right this way.
In your data set, if it's SQL, you can use a little construnct with CASE and the LAG analytic function to compare the column value to that of the previous row, and if they are equal, return NULL instead (pure SQL solution).
I'm currently setting up a dependent drop down & I've now got it working. The relevant drop-down is in cells L9:L65 with the data for the drop-down being provided in A68:Z68 through to A121:Z121 via the following formula
=ARRAYFORMULA(IFERROR(IF('390'!J9:J65="Livery", TRANSPOSE(FILTER(Operators!$C$2:C, Operators!$C$2:C<>"")), IF('390'!J9:J65="Operator", TRANSPOSE(FILTER(Operators!$B$2:B, Operators!$B$2:B<>"")), ))))
In cell L9 I've set the following data validation as a list from a range
A68:Z68
Which works perfectly. However, when I copy and paste the other cells in the L column all cells relate to A68:Z68 instead of running in ascending order meaning I've just had to manually amend the data validation in L10:L65 to ensure it fetched the correct data and it nearly sent me mad. Considering some of my sheets will incorporate over 200 rows doing this manually is going to prove tedious and time-consuming so I'm hoping someone can show me a way to quickly get each cell corresponding to the correct row without manual intervention?
by standard means (eg. without using a script), this is possible to achieve only manually setting it up row by row (cell by cell) for the whole range.
http://www.chicagocomputerclasses.com/google-sheets-apps-script-dynamic-dependent-dropdown-data-validation-lists/
See image below. Warehouse and Customer are dropdown lists populated via query. Year is a text field. The two tables display data from datasets driven by the report parameters. Is there a way to repeat the two tables based on each member of the Customer dropdown? Preferbly with a pagebreak after the 2nd table.
I normally do this using subreports. You could either create a single subreport that contains both tables or individual subreports. The individual approach might help with page breaks etc so that's the way I'd go.
Step 1: Create a report for your first table.
As you don't state what each table does, I'll make some up for the sake of illustration.
The key is to create a subreport that displays just the info you need in a single table. So in your case this might mean we only need to pass in a single parameter, CustomerID. You might need to pass in more such as Warehouse but I don't know...
In my made up scenario, let's assume the report shows customer contacts so we create a subreport (let's call it subCustomerConacts). It has a single parameter pCustomerID and a single dataset dsCustomerContacts. The query might looks something like SELECT * FROM CustomerContacts WHERE CustomerID = #pCustomerID. Add whatever tables/textbox etc you need to display your data.
Test this subreport works by manually typing in a CustomerID
Step 2: Create a report for your second table.
Do exactly the same again, creating a new subreport. Let call this subCustomerOrders. Repeat as above until you end up with another report that can display order details (or whatever you need).
Finally, create you main report.
This is basically what you have described in you question in terms of parameters etc.
Now to add this bit that will call you subreports.
Create a dataset (let's call it dsCustomerLoop) that contains each customer from your parameter something like SELECT DISTINCT CustomerID FROM myCustomers WHERE CustomerID IN (#myCustomerParameter)
Add a table to your report, 1 column wide and stretch it so it's wide enough to accommodate you subreports.
Set the dataset to point to dsCustomerLoop
Right-Click the cell in the detail row and do "Insert Row -> Inside Group - Below". You should not have two detail rows.
Next, right click the top detail row and do "Insert -> Subreport"
Right-Click the newly inserted subreport control and choose "properties".
Choose your first SubReport form the drop-down list
Click parameters on the left,
Click "Add" and select the CusomterID parmeter, set it's value to the CustomerID field.
Repeat this process on the seconds row, choosing your seconds subreport.
You may want to also add a 3rd row to the table, you could insert a rectangle into this with page breaks set to force a new page after each seconds subreport.
That's It. When the report runs it will produce two rows per customer, each row containing a subreport.
I hope this is clear enough, I've rushed through it a bit but if anything is unclear, let me know and I'll provide a clearer solution.
Everything except for the name may or may not be different, but it doesn't matter.
How do you make it so the name and address (first column) can only show once if the value on multiple rows is the same? There is no way to merge the rows together due to the numbers of rows being generated from a group expression. But if there is another way to merge then can someone tell me how to do it? If not, then is there at least a way to blank out the second and third repeating names (and address)?
This is how you hide repeating values in a tablix column.
In design mode, click on the detail cell that you want to keep from repeating if the values are the same. In this case, you are referring to that one as the name and address column.
Look for the HideDuplicates property in the Properties pane. Set the value to the name of the dataset the tablix is using.
Now, when you run the report, that value should only show once. The other rows where the value had been repeating will be blank in that cell.
Set the borders appropriately (none, or solid) to make it look like the cells are merged. Doing the above alone will not merge the cells. Only a row group will do that.
I have a matrix that has a group filtered at the matrix level. I can't filter the SQL because it is very large and is used all over my report.
I need to be able to specify the columns to display after the filter is applied.
The end filter would look something like this
if ColumnA[value] IN Test1,Test2,Test3 OR ColumnB[name]
As you can see I want a value string filter and make sure ColumnB get displayed at all times.
Or being able to specify the columns to show in the matrix would work also.
You can filter at the dataset level: see here for more detail.
To filter a tablix, go into Tablix Properties and open up the Filters tab. You can write a Boolean expression (must evaluate to TRUE for the record to come into the Tablix) to do the filtering there.
I ended up using a tablix and creating columns for each column I wanted to display and rows for each row item. I then used a Count(IIF()) statement to match the specific item I needed to calculate for that cell. I wanted to use the matrix so it would not be so long winded but in the end I got the job done. I have since used this method on many occasions.