I have a string:
string1 = "my name is fname.lname and i live in xyz. my lname is not common"
I want to extract a substring from string1 that is anything between the first empty space " " and ".lname". In the case above, the answer should be "fname.lname"`.
string1[/(?<= ).*?(?=\.lname\b)/]
#=> "name is fname"
(?<= ) is a positive lookbehind that requires the first character matched be immediately preceded by a space, but that space is not part of the match.
(?=\.lname\b) is a positive lookahead that requires the last character matched is immediately followed by the string ".lname"1
, which is itself followed by a word break (\b), but that string is not part of the match. That ensures, for example, that "\.lnamespace" is not matched. If that should be matched, remove \b.
.*? matches zero more characters (.*), non-greedily (?). (Matches are by default greedy.) The non-greedy qualifier has the following effect:
"my name is fname.lname and fname.lname"[/(?<= ).*(?=\.lname\b)/]
#=> "name is fname.lname and fname"
"my name is fname.lname and fname.lname"[/(?<= ).*?(?=\.lname\b)/]
#=> "name is fname"
In other words, the non-greedy (greedy) match matches the first (last) occurrence of ".lname" in the string.
This could alternatively be written with a capture group and no lookarounds:
string1[/ (.*?)\.lname\b/, 1]
#=> "name is fname"
This regular expression reads, "mactch a space followed by zero or more characters, saved in capture group 1, followed by the string ".name" followed by a word break. This uses the form of String#[] that has two arguments, a reference to a capture group.
Yet another way follows.
string1[(string1 =~ / /)+1..(string1 =~ /\.lname\b/)-1]
#=> "name is fname"
1 The period in ".lname" must be escaped because an unescaped period in a regular expression (except in a character class) matches any character.
Related
I want to select all the commas in a string that do not have any white space around. Suppose I have this string:
"He,she, They"
I want to select only the comma between he and she. I tried this in rubular and came up with this regex:
(,[^(,\s)(\s,)])
This selects the comma that I want, but also selects an s which is a character after it.
In your regex (,[^(,\s)(\s,)]) you capture a comma followed by a negated character class that matches not any of the specified characters, which could also be written as (,[^)(,\s]) which will capture for example ,s in a group,
What you could do is use a positive lookahead and a positve lookbehind to check what is on the left and what is on the right is not a \S whitespace character:
(?<=\S),(?=\S)
Regex demo
In Ruby, you may use [[:space:]] to match any (Unicode) whitespace and [^[:space:]] to match any char other than whitespace. Using these character classes inside lookarounds solves the problem:
/(?<=[^[:space:]]),(?=[^[:space:]])/
See the Rubular demo
Here,
(?<=[^[:space:]]) - a positive lookbehind that matches a location that is immediately preceded with a non-whitespace char (if the string start position should also be matched, replace with (?<![[:space:]]))
, - a comma
(?=[^[:space:]]) - a positive lookahead that matches a location that is immediately followed with a non-whitespace char (if the string end position should also be matched, replace with (?![[:space:]])).
Check the regex below and use the code hope it will help you!
re = /[^\s](,)[^\s]/m
str = 'check ,my,domain, qwe,sd'
# Print the match result
str.scan(re) do |match|
puts match.to_s
end
Check LIVE DEMO HERE
How do I express in regex the letter "s" whose next non-space character is not a "/"?
These should match: "s", "str"
These should not: "s/m", "s /n"
I tried this
"str" =~ /s[^[[:space:]]]^\// #=> nil
but it does not even match the simple use case.
It seems you need to match any s that is not followed with any 0+ whitespace chars and a / after them.
Use
/s(?![[:space:]]*\/)/
See the Rubular demo.
Details
s - the letter s
(?![[:space:]]*\/) - a negative lookahead that fails the match if, immediately to the right of the current location, there are
[[:space:]]* - 0+ whitespaces
\/ - a /.
If you merely want to know the number of 's' characters that are not followed by zero or more spaces and then a forward slash (as opposed to their indices in the string), you don't have to use a regular expression.
"sea shells /by the sea s/hore".delete(" ").gsub("s/", "").count("s")
#=> 3
If you only want to know if there is at least one such 's' you could replace count("s") with include?("s").
I'm not arguing that this is preferable to the use of a regular expression.
I am currently working on a ruby program to calculate terms. It works perfectly fine except for one thing: brackets. I need to filter the content or at least, to put the content into an array, but I have tried for an hour to come up with a solution. Here is my code:
splitted = term.split(/\(+|\)+/)
I need an array instead of the brackets, for example:
"1-(2+3)" #=>["1", "-", ["2", "+", "3"]]
I already tried this:
/(\((?<=.*)\))/
but it returned:
Invalid pattern in look-behind.
Can someone help me with this?
UPDATE
I forgot to mention, that my program will split the term, I only need the content of the brackets to be an array.
If you need to keep track of the hierarchy of parentheses with arrays, you won't manage it just with regular expressions. You'll need to parse the string word by word, and keep a stack of expressions.
Pseudocode:
Expressions = new stack
Add new array on stack
while word in string:
if word is "(": Add new array on stack
Else if word is ")": Remove the last array from the stack and add it to the (next) last array of the stack
Else: Add the word to the last array of the stack
When exiting the loop, there should be only one array in the stack (if not, you have inconsistent opening/closing parentheses).
Note: If your ultimate goal is to evaluate the expression, you could save time and parse the string in Postfix aka Reverse-Polish Notation.
Also consider using off-the-shelf libraries.
A solution depends on the pattern you expect between the parentheses, which you have not specified. (For example, for "(st12uv)" you might want ["st", "12", "uv"], ["st12", "uv"], ["st1", "2uv"] and so on). If, as in your example, it is a natural number followed by a +, followed by another natural number, you could do this:
str = "1-( 2+ 3)"
r = /
\(\s* # match a left parenthesis followed by >= 0 whitespace chars
(\d+) # match one or more digits in a capture group
\s* # match >= 0 whitespace chars
(\+) # match a plus sign in a capture group
\s* # match >= 0 whitespace chars
(\d+) # match one or more digits in a capture group
\s* # match >= 0 whitespace chars
\) # match a right parenthesis
/x
str.scan(r0).first
=> ["2", "+", "3"]
Suppose instead + could be +, -, * or /. Then you could change:
(\+)
to:
([-+*\/])
Note that, in a character class, + needn't be escaped and - needn't be escaped if it is the first or last character of the class (as in those cases it would not signify a range).
Incidentally, you received the error message, "Invalid pattern in look-behind" because Ruby's lookarounds cannot contain variable-length matches (i.e., .*). With positive lookbehinds you can get around that by using \K instead. For example,
r = /
\d+ # match one or more digits
\K # forget everything previously matched
[a-z]+ # match one or more lowercase letters
/x
"123abc"[r] #=> "abc"
I have a string with chars inside and I would like to match only the chars around a string.
"This is a [1]test[/1] string. And [2]test[/2]"
Rubular http://rubular.com/r/f2Xwe3zPzo
Currently, the code in the link matches the text inside the special chars, how can I change it?
Update
To clarify my question. It should only match if the opening and closing has the same number.
"[2]first[/2] [1]second[/2]"
In the code above, only first should match and not second. The text inside the special chars (first), should be ignored.
Try this:
(\[[0-9]\]).+?(\[\/[0-9]\])
Permalink to the example on Rubular.
Update
Since you want to remove the 'special' characters, try this instead:
foo = "This is a [1]test[/1] string. And [2]test[/2]"
foo.gsub /\[\/?\d\]/, ""
# => "This is a test string. And test"
Update, Part II
You only want to remove the 'special' characters when the surrounding tags match, so what about this:
foo = "This is a [1]test[/1] string. And [2]test[/2], but not [3]test[/2]"
foo.gsub /(?:\[(?<number>\d)\])(?<content>.+?)(?:\[\/\k<number>\])/, '\k<content>'
# => "This is a test string. And test, but not [3]test[/2]"
\[([0-9])\].+?\[\/\1\]
([0-9]) is a capture since it is surrounded with parentheses. The \1 tells it to use the result of that capture. If you had more than one capture, you could reference them as well, \2, \3, etc.
Rubular
You can also use a named capture, rather than \1 to make it a little less cryptic. As in: \[(?<number>[0-9])\].+?\[\/\k<number>\]
Here's a way to do it that uses the form of String#gsub that takes a block. The idea is to pull strings such as "[1]test[/1]" into the block, and there remove the unwanted bits.
str = "This is a [1]test[/1] string. And [2]test[/2], plus [3]test[/99]"
r = /
\[ # match a left bracket
(\d+) # capture one or more digits in capture group 1
\] # match a right bracket
.+? # match one or more characters lazily
\[\/ # match a left bracket and forward slash
\1 # match the contents of capture group 1
\] # match a right bracket
/x
str.gsub(r) { |s| s[/(?<=\]).*?(?=\[)/] }
#=> "This is a test string. And test, plus [3]test[/99]"
Aside: When I first heard of named capture groups, they seemed like a great idea, but now I wonder if they really make regexes easier to read than \1, \2....
I have the following string:
"h3. My Title Goes Here"
I basically want to remove the first four characters from the string so that I just get back:
"My Title Goes Here".
The thing is I am iterating over an array of strings and not all have the h3. part in front so I can't just ditch the first four characters blindly.
I checked the docs and the closest thing I could find was chomp, but that only works for the end of a string.
Right now I am doing this:
"h3. My Title Goes Here".reverse.chomp(" .3h").reverse
This gives me my desired output, but there has to be a better way. I don't want to reverse a string twice for no reason. Is there another method that will work?
To alter the original string, use sub!, e.g.:
my_strings = [ "h3. My Title Goes Here", "No h3. at the start of this line" ]
my_strings.each { |s| s.sub!(/^h3\. /, '') }
To not alter the original and only return the result, remove the exclamation point, i.e. use sub. In the general case you may have regular expressions that you can and want to match more than one instance of, in that case use gsub! and gsub—without the g only the first match is replaced (as you want here, and in any case the ^ can only match once to the start of the string).
You can use sub with a regular expression:
s = 'h3. foo'
s.sub!(/^h[0-9]+\. /, '')
puts s
Output:
foo
The regular expression should be understood as follows:
^ Match from the start of the string.
h A literal "h".
[0-9] A digit from 0-9.
+ One or more of the previous (i.e. one or more digits)
\. A literal period.
A space (yes, spaces are significant by default in regular expressions!)
You can modify the regular expression to suit your needs. See a regular expression tutorial or syntax guide, for example here.
A standard approach would be to use regular expressions:
"h3. My Title Goes Here".gsub /^h3\. /, '' #=> "My Title Goes Here"
gsub means globally substitute and it replaces a pattern by a string, in this case an empty string.
The regular expression is enclosed in / and constitutes of:
^ means beginning of the string
h3 is matched literally, so it means h3
\. - a dot normally means any character so we escape it with a backslash
is matched literally