I'm trying to set a cookie in a page object command, but it fails.
Here is the page object command:
setThingTypeCookie: function() {
return this.api.setCookie({
name : "thingType",
value : "I am a thingType ID"
})
.pause(1);
},
When running the test, I receive the following error:
Error while running .setCookieString() protocol action: unable to set cookie
Can someone please point out what I'm doing wrong?
Thanks!
Butch
Related
I try to cleanup my database with command cy.cleanUpPreviousState:
// mytest.cy.js
...
beforeEach(() => {
cy.cleanUpPreviousState()
})
...
the request was response with error:
CypressError
cy.request() failed trying to load:
http://my-route.dev.localhost:8005/cleanup
The app runs in docker container, using shyim/shopware-docker
Questions
What is wrong with my request/route?
Which controller has to take this request?
To find out what is wrong, have a log at the network tab request log.
Answering your second question: There is a special server spun up for this action. It is not a normal Shopware route.
See in the cypress.js - it is supposed to use psh.phar to clean-up when this URL is called.
const requestedUrl = request.url;
if (requestedUrl !== "/cleanup") {
response.end();
return;
}
return childProcess.exec(
`${PROJECT_ROOT}/psh.phar e2e:cleanup`,
[...]
server.listen(8005);
So things to check are:
Is that port forwarded to your docker container?
Are you using the development template and is psh.phar existing?
I am working on an automation prototype using Nightwatch js and when I am trying to save screenshot, it is giving below error
Error while running .getScreenshot() protocol action: An unknown
server-side error occurred while processing the command. – An unknown
server-side error occurred while proces...
TEST FAILURE: 1 error during execution; 0 tests failed, 0 passed
(10.032s)
TypeError: The "data" argument must be of type string or an instance
of Buffer, TypedArray, or DataView. Received an instance of Object
at Object.writeFile (fs.js:1487:5)
at FSReqCallback.oncomplete (fs.js:180:23)
FAILED: 1 errors and 1 passed (9.662s)
relevant data for nightwatch.config.js:
test_settings: {
"screenshots": {
"enabled": true, // if you want to keep screenshots
"path": './screenshots' // save screenshots here
},
test file data:
.pause(3000).saveScreenshot('./screnshots/test.png');
Nightwatch version: "1.5.1"
please note that due to office policy cannot paste complete testcase data here.
After installation wizard is finished I get this error.
Slim Application Error
The application could not run because of the following error:
Details
Type: RuntimeException
Message: Identifier DB not initialized yet
File: /.../recovery/install/src/ContainerProvider.php
Line: 162
Is there is some configuration file where I can set DB params? I had insert all params via installation wizard.
In file recovery/install/src/ContainerProvider.php
Add 2 strings:
In use-section
use Shopware\Recovery\Update\Utils;
2.Inside the register-function:
$container['db'] = function ($c) {
$conn = Utils::getConnection(SW_PATH);
return $conn;
};
I have a kony sample app where I am trying to do a build and the app has one web service in it for fetching categories of some product. I have the following code also that I wrote:
function GetCategories() {
var inputparam = {
"appID": "bbuy",
"serviceID": "GetCategories",
"catId": "cat00000",
"channel": "rc",
"httpheaders": {}
};
kony.net.invokeServiceAsync("http://192.168.42.134/middleware/MWservlet",inputparam, serv_GetCategoriesCallback);
}
I am getting no response for this. Getting 1012 opstatus and the message is saying "Request failed" error.
kony.net.invokeServiceAsync("http://192.168.42.134/middleware/MWservlet",inputparam, serv_GetCategoriesCallback);
In the above line, you have not given the port number in the MWservlet URL.(e.g. 8080) Give that and check.
Also, make sure all input params are being fed to the service and that they correspond to the exact naming convention followed in the service editor.
Visit :
Find the below link. i hope it gives you a solution
http://developer.kony.com/twiki/pub/Portal/Docs/API_Reference/Content/Network_APIs.htm#net.invo2
Check the mandatory and optional fields of Inputparam
I would like to change the "Upload failed" message to one returned from my server-side processing.
I can see the message I want in the onError callback but I'm not sure how to used that instead of the default message.
Thoughts, examples or further reading advice welcome (new here).
The implementation of what you're trying to do depends on whether you are using Fine Uploader Basic/Core or Regular/UI. This is because UI mode offers some extra goodies for displaying error messages and such.
A few properties/options that may benefit you:
Fine Uploader Basic/Core mode
text.defaultResponseError
Message sent to the onError callback if no specific information about the error can be determined. This is used if the server indicates failure in the response but does not include an “error” property in the response and the error code is 200 (XHR only)
var uploader = new qq.FineUploaderBasic({
/* ... */
text: {
defaultResponseError: "Oh noes! Upload fail."
}
});
The documentation on 'text'
Fine Uploader Regular/UI mode
failedUploadTextDisplay.mode option
Valid values are “default” (display the text defined in failUploadText next to each failed file), “none” (don’t display any text next to a failed file), and “custom” (display error response text from the server next to the failed file or Blob).
failedUploadTextDisplay.responseProperty option
The property from the server response containing the error text to display next to the failed file or Blob. This is ignored unless mode is “custom”.
var uploader = new qq.FineUploader({
/* ... */
text: {
defaultResponseError: "Oh noes! Upload fail."
},
failedUploadTextDisplay: {
mode: 'custom', // Display error responses from the server.
responseProperty: 'errorMsg' // Default is 'error', change this to match the
// property that contains the error message from
// your server
}
});
The documentation on failedUploadTextDisplay
For people who still use FineUploaded and above does not work, that is because the key is not changed to failUpload.
Usage for a custom message on UI end would be
text: {
failUpload: 'Your upload faile message goes here
},
More details can be found here - https://docs.fineuploader.com/branch/master/upgrading-to-4.html
If you want to display the server-side message, you can do it the below way:
failedUploadTextDisplay {
mode: 'custom',
responseProperty: 'server side error key goes here'
}
If you wish to completely remove it, i.e, not show the message below file if file upload has failed, use below
failedUploadTextDisplay {
mode: 'none'
}