I faced with problem when I installed python-pptx with conda on cleaned environment:
conda install -c conda-forge python-pptx. After install was successfully finished I tried to import pptx module and got following error:
>>> import pptx
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "C:\Users\SazonovEO\AppData\Local\Continuum\anaconda3\envs\new\lib\site-p
ackages\pptx\__init__.py", line 13, in <module>
from pptx.api import Presentation # noqa
File "C:\Users\SazonovEO\AppData\Local\Continuum\anaconda3\envs\new\lib\site-p
ackages\pptx\api.py", line 17, in <module>
from .package import Package
File "C:\Users\SazonovEO\AppData\Local\Continuum\anaconda3\envs\new\lib\site-p
ackages\pptx\package.py", line 13, in <module>
from .opc.package import OpcPackage
File "C:\Users\SazonovEO\AppData\Local\Continuum\anaconda3\envs\new\lib\site-p
ackages\pptx\opc\package.py", line 13, in <module>
from .oxml import CT_Relationships, serialize_part_xml
File "C:\Users\SazonovEO\AppData\Local\Continuum\anaconda3\envs\new\lib\site-p
ackages\pptx\opc\oxml.py", line 12, in <module>
from lxml import etree
ImportError: DLL load failed: Не найден указанный модуль.
But if I installed this library (python-pptx) with pip like this (also into new cleaned environment):
pip install python-pptx
this works.
I have following versions: python version - 3.7.1, python-pptx-0.6.17, lxml-4.3.0.
Do you have any ideas about this issue?
Reinstallation lxml from pkgs/main channel from anaconda repo allow workaround issue:
conda install lxml
The following packages will be UPDATED:
libxml2 conda-forge::libxml2-2.9.8-h9ce36c8_1~ -->
pkgs/main::libxm l2-2.9.9-h464c3ec_0 libxslt
conda-forge::libxslt-1.1.32-heafd4d3_~ --> pkgs/main::libxs
lt-1.1.33-h579f668_0
The following packages will be SUPERSEDED by a higher-priority
channel: ... lxml
conda-forge::lxml-4.3.2-py37heafd4d3_0 --> pkgs/main::lxml-
4.3.2-py37h1350720_0 ...
First of all, try the following command in your terminal in order to enable the conda-forge:
conda config --add channels conda-forge
Secondly, run the following command and after a while enter [y]:
conda install python-pptx
Related
Good morning!
Until yesterday I was using python 2.7 and using the following code for writing output files for my scripts:
import sys
reload(sys)
sys.setdefaultencoding('utf-8')
But now I'm upgrading my code to python 3.7, so now I need to use importlib.reloadinstead of just reload. However, typing sudo -H pip3 install importlib on my shell gives me the following error:
Collecting importlib
Using cached https://files.pythonhosted.org/packages/31/77/3781f65cafe55480b56914def99022a5d2965a4bb269655c89ef2f1de3cd/importlib-1.0.4.zip
Complete output from command python setup.py egg_info:
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/usr/local/lib/python3.7/site-packages/setuptools/__init__.py", line 6, in <module>
import distutils.core
File "/usr/local/Cellar/python/3.7.2_2/Frameworks/Python.framework/Versions/3.7/lib/python3.7/distutils/core.py", line 16, in <module>
from distutils.dist import Distribution
File "/usr/local/Cellar/python/3.7.2_2/Frameworks/Python.framework/Versions/3.7/lib/python3.7/distutils/dist.py", line 19, in <module>
from distutils.util import check_environ, strtobool, rfc822_escape
File "/usr/local/Cellar/python/3.7.2_2/Frameworks/Python.framework/Versions/3.7/lib/python3.7/distutils/util.py", line 9, in <module>
import importlib.util
ModuleNotFoundError: No module named 'importlib.util'
----------------------------------------
Command "python setup.py egg_info" failed with error code 1 in /private/tmp/pip-install-3cz_3d6n/importlib/
After looking for solutions I also tried to upgrade setuptools, but that didn't fix my problem.
Many thanks in advance!
importlib at PyPI is an outdated package intended for very old Python versions. For new versions of Python importlib is a module from the standard library, you don't need to install it, it's always available.
Ive updated my Python version from 3.5.4 to 3.6.6 (in Anaconda 3) and now the line
from sklearn.metrics.pairwise import cosine_similarity
causes the following error:
Traceback (most recent call last):
File "<ipython-input-3-743ac88bcf9a>", line 1, in <module>
from sklearn.metrics.pairwise import cosine_similarity
File "F:\Program Files\lib\site-packages\sklearn\__init__.py", line 64, in <module>
from .base import clone
File "F:\Program Files\lib\site-packages\sklearn\base.py", line 13, in <module>
from .utils.fixes import signature
File "F:\Program Files\lib\site-packages\sklearn\utils\__init__.py", line 13, in <module>
from .validation import (as_float_array,
File "F:\Program Files\lib\site-packages\sklearn\utils\validation.py", line 22, in <module>
from ..utils.fixes import signature
File "F:\Program Files\lib\site-packages\sklearn\utils\fixes.py", line 83, in <module>
from scipy.special import boxcox # noqa
File "F:\Program Files\lib\site-packages\scipy\special\__init__.py", line 640, in <module>
from ._ufuncs import *
ImportError: DLL load failed: The specified module could not be found.
Im on Windows 7, 64-bit; previously the line worked fine, and other packages (Pandas, Numpy etc) still work, so it doesn't appear to be a PATH issue as some have suggested.
Ive seen numerous similar questions but all solutions have so far failed. E.g.
roll the installation back to Python 3.5.4,
uninstall & re-install Pandas, Numpy, Scipy and Sklearn, also update MKL/MKL-RT.
The changes suggested in Error when trying to import sklearn modules : ImportError: DLL load failed: The specified module could not be found
were already implemented
Does anyone have any further suggestions (specific to Anaconda etc)?
I solved it, and (in my case) the problem was scipy, not sklearn.
What i did was uninstall scipy with conda: conda remove --force scipy, and then install it with pip: pip install scipy. That worked for me.
I am trying to install spacy for windows, python 3.x.
I ran the following commands:-
conda install -c conda-forge spacy
python -m spacy download en
"python -m spacy download en" gives the error:-
Traceback (most recent call last):
File "D:\Anaconda3\lib\runpy.py", line 174, in _run_module_as_main
mod_name, mod_spec, code = _get_module_details(mod_name, _Error)
File "D:\Anaconda3\lib\runpy.py", line 133, in _get_module_details
return _get_module_details(pkg_main_name, error)
File "D:\Anaconda3\lib\runpy.py", line 109, in _get_module_details
__import__(pkg_name)
File "D:\Anaconda3\lib\site-packages\spacy\__init__.py", line 4, in <module>
from .cli.info import info as cli_info
File "D:\Anaconda3\lib\site-packages\spacy\cli\__init__.py", line 1, in <module>
from .download import download
File "D:\Anaconda3\lib\site-packages\spacy\cli\download.py", line 10, in <module>
from .link import link
File "D:\Anaconda3\lib\site-packages\spacy\cli\link.py", line 7, in <module>
from ..compat import symlink_to, path2str
File "D:\Anaconda3\lib\site-packages\spacy\compat.py", line 11, in <module>
from thinc.neural.util import copy_array
File "D:\Anaconda3\lib\site-packages\thinc\__init__.py", line 1, in <module>
from .about import *
ImportError: No module named 'thinc.about'
and the same error when I try to import spacy thereafter. What should I do to successfully install spacy?
I found this link from where I downloaded all of the required whls one by one to install spacy.
Compiling wheel rather than downloading ready one might be helpful as well:
python -m pip install thinc --no-binary=:all:
or
pip install thinc --no-binary=:all:
Don't forget to add --force option if you already have the package.
More information about --no-binary option:
https://pip.pypa.io/en/latest/cli/pip_install/#cmdoption-no-binary
I wanted to do LDA on some data and so followed this example:
http://scikit-learn.org/stable/auto_examples/decomposition/plot_pca_vs_lda.html#example-decomposition-plot-pca-vs-lda-py
however, on trying:
from sklearn.discriminant_analysis import LinearDiscriminantAnalysis
I got an import error. Huh, maybe this is a new function, I thought. So I updated scikit-learn via conda from 0.15.2 to 0.17. But now I can't even import sklearn:
import sklearn
RuntimeError: module compiled against API version a but this version of numpy is 9
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "//anaconda/lib/python2.7/site-packages/sklearn/__init__.py", line 57, in <module>
from .base import clone
File "//anaconda/lib/python2.7/site-packages/sklearn/base.py", line 9, in <module>
from scipy import sparse
File "//anaconda/lib/python2.7/site-packages/scipy/sparse/__init__.py", line 213, in <module>
from .csr import *
File "//anaconda/lib/python2.7/site-packages/scipy/sparse/csr.py", line 13, in <module>
from ._sparsetools import csr_tocsc, csr_tobsr, csr_count_blocks, \
ImportError: numpy.core.multiarray failed to import
I tried updating numpy and scipy using both pip and conda to no avail. I then tried a complete clean re-install of anaconda by:
rm -rf ~/anaconda
and a subsequent download of the .pkg from http://docs.continuum.io/anaconda/install#anaconda-install
Still I get the same error. Here are my OS and package details:
Mac OSX 10.5.2
bash-3.2$ conda -V
conda 3.18.6
scipy==0.16.0
numpy==1.9.1
scikit-learn==0.17
The last of these via pip freeze since I can't import it. I'm going nuts here. Any help much appreciated.
Try:
conda install numpy=1.10.1
I've had that module compiled against API version a but this version of numpy is 9 error before, and this solved it for me.
I've recently installed pylint on a windows 7 and when I run it I get the error:
Error executing PyLint: Command failed with error=None, status=1; stderr:
Traceback (most recent call last):
File "C:\Python27\Scripts\pylint", line 3, in <module>
run_pylint()
File "c:\python27\lib\site-packages\pylint\__init__.py", line 20, in run_pylint
from pylint.lint import Run
File "c:\python27\lib\site-packages\pylint\lint.py", line 30, in <module>
from pylint.checkers import utils #pylint: disable=unused-import
File "c:\python27\lib\site-packages\pylint\checkers__init__.py", line 47, in
from pylint.reporters import diff_string
File "c:\python27\lib\site-packages\pylint\reporters__init__.py", line 20, in
from pylint.utils import MSG_TYPES
File "c:\python27\lib\site-packages\pylint\utils.py", line 32, in
from astroid import nodes, Module
ImportError: No module named astroid
I've followed the install instructions as best I can but can't seem to get past this.
Use this link to install pip properly How do I install pip on Windows?
then do the pip install pylint
then do go through this note http://docs.pylint.org/installation.html#note-for-windows-users