NiFi version 1.5
i have a csv file arrives first time like:
datetime,a.DLG,b.DLG,c.DLG
2019/02/04 00:00,86667,98.5,0
2019/02/04 01:00,86567,96.5,0
used listfile -> fetchfile to get the csv file.
next 10 minutes, i get appended csv file:
datetime,a.DLG,b.DLG,c.DLG
2019/02/04 00:00,86667,98.5,0
2019/02/04 01:00,86567,96.5,0
2019/02/04 02:00,86787,99.5,0
2019/02/04 03:00,86117,91.5,0
here, how do we need to get only new records alone (last two records). i do not want to process first two records that is already been processed.
my thought process is, we need to get maximum datetime to store in attribute and use QueryRecord. but i do not know how to get maximum datetime using which processor.
is there any better solution.
This is currently an open issue (NIFI-6047) but there has been a community contribution to address it, so you may see the DetectDuplicateRecord processor in an upcoming release of NiFi.
There may be a workaround to split up the CSV rows and create a compound key using ExtractText, then using DetectDuplicate.
It doesn't seems to be a work that is best solved on Nifi as you need to keep a state of what you have processed. An alternative would be for you to delete what you have already processed. Then you can assume what is in the file is always not processed.
here, how do we need to get only new records alone (last two records).
i do not want to process first two records that is already been
processed.
From my understanding, actual question is 'how to process/ingest csv rows as it is written to the file?'.
Description of 'TailFile' processor from NiFi documentation:
"Tails" a file, or a list of files, ingesting data from the file as it
is written to the file. The file is expected to be textual. Data is
ingested only when a new line is encountered (carriage return or
new-line character or combination)
This solution is appropriate when you don't want to move/delete actual file.
Related
This is a relatively simple problem with (I'm hoping) a similarly-simple solution.
In my ADF ETLs, any time there's a known and expected yet unrecoverable row-based error, I don't want my full ETL to fail. Instead, I'd rather pipe those rows off to a log, which I can then pick up at the end of the ETL for manual inspection. To do this, I use conditional splits.
Most of the time, there shouldn't be any rows like this. When this is the case, I don't want my blob sink to write a file. However, the current behavior writes a file no matter what -- it's just that the file only contains the table header.
Is there a way to skip writing anything to a blob sink when there are no input rows?
Edit: Somehow I forgot to specify -- I'm specifically referring to a Mapping Data Flow with a blob sink.
You can use Lookup activity(don't check first row only) to get all your table data firstly. Then use If condition to check the count of Lookup activity's output. If its count > 0, execute next activity(or data flow).
I'm working with NiFi, receiving several json in the same file. Pretending to modify propertly those jsons, I split it into several single flowfiles and here is where the problems start.
For each id and datetime, there are 3 flowfiles that I would like to merge into a single flowfile. I've tried to use MergeRecord NiFi's Processor, but it works when it wants. When I have a few records, it seems that it works ok. But when I have "a lot of" records, e.g., more than 70 records, it breaks. Sometimes it merges 2 records in a single record, sometimes it lets pass a single record directly.
merge_key is a string attribute based on id and datetime.
I need to take exactly 3 records and merge them in a single one.
If there is a way to order the flowfile and take the first n elements of it each 5 seconds, I think it can help. But I prefer to be sure it works properly without any "help"...
For ordering the flowfile we can use the EnforceOrder processor as per the default documentation.
https://nifi.apache.org/docs/nifi-docs/components/org.apache.nifi/nifi-standard-nar/1.5.0/org.apache.nifi.processors.standard.EnforceOrder/#:~:text=Order%20Attribute,will%20be%20routed%20to%20failure.
Also NiFi uses below prioritizers among the incoming flow files.
FirstInFirstOutPrioritizer
NewestFlowFileFirstPrioritizer
OldestFlowFileFirstPrioritizer
PriorityAttributePrioritizer
Refer below link for more details
https://nifi.apache.org/docs/nifi-docs/html/user-guide.html
We have a flow where GenerateTableFetch takes inpute from splitJson which gives TableName, ColumnName as argument. At once multiple tables are passed as input to GenerateTableFetch and next ExecuteSql executes the query.
Now i want to trigger a new process when all the files for a table has been processed by the below processor (At the end there is PutFile).
How to find that all the files created for a Table has been processed?
You may need NIFI-5601 to accomplish this, there is a patch currently under review at the time of this writing, I hope to get it into NiFi 1.9.0.
EDIT: Adding potential workarounds in the meantime
If you can use ListDatabaseTables instead of getting your table names from a JSON file, then you can set Include Count to true. Then you will get attributes for the table name and the count of its rows. Then you can divide the count by the value of the Partition Size in GTF and that will give you the number of fetches (let's call it X). Then add an attribute via UpdateAttribute called "parent" or something, and set it to ${UUID()}. Keep these attributes in the flow files going into GTF and ExecuteScript, then you can use Wait/Notify to wait until X flow files are received (setting Target Signal Count to ${X}) and using ${parent} as the Release Signal Identifier.
If you can't use ListDatabaseTables, then you may be able to have ExecuteSQLRecord after your SplitJSON, you can execute something like SELECT COUNT(*) FROM ${table.name}. If using ExecuteSQL, you may need a ConvertAvroToJSON, if using ExecuteSQLRecord use a JSONRecordSetWriter. Then you can extract the count from the flow file contents using EvaluateJsonPath.
Once you have the table name and the row count in attributes, you can continue with the flow I outlined above (i.e. determine the number of flow files that GTF will generate, etc.).
I am getting files from remote server using Nifi: my files are as follow:
timestamp (ms), nodeID,value
12345,x,12.4
12346,x,12.7
12348,x,13.4
12356,x,13,6
12355,y,12.0
I am now just get and fetch and split lines and send them to Kafka, but before hand, I need to apply a checksum approach on my records and aggregate them based on time stamp, what I need to do to add an additional column to my content and count the records based on aggregated time stamps, for example aggregation based on each 10 milliseconds and nodeID..
timestamp (ms), nodeID,value, counts
12345,x,12.4,3
12346,x,12.7,3
12348,x,13.4,3
12356,x,13,6,1
12355,y,12.0,1
How to do above process in NiFi. I am totally new to Nifi but need to add above functinality to my Nifi process. I am currently using below nifi process
This may not answer your question directly, but you should consider refactoring your flow to use the "record" processors. It would greatly simplify things and would probably get you closer to being able to do the aggregation.
The idea is to not split up the records, and instead process them in place. Given your current flow, the 4 processors after FetchSFTP would like change to a single ConvertRecord processor that converts CSV to JSON. You would first need to defined a simple Avro schema for your data.
Once you have the record processing setup, you might be able to use PartitionRecord to partition the records by the node id, and then from there the missing piece would be how to count by the timestamps.
Some additional resources...
https://blogs.apache.org/nifi/entry/record-oriented-data-with-nifi
https://bryanbende.com/development/2017/06/20/apache-nifi-records-and-schema-registries
https://www.slideshare.net/BryanBende/apache-nifi-record-processing
I have a requirement to write multiple files using Spring Batch. The first file will be written based on the data from the database table. The second file will contain just the number of records written to the first file. How can I create the second file? I am not sure whether org.springframework.batch.item.file.MultiResourceItemWriter is an option for me as I think it will write multiple files based on the data it will write chunks of data in the multiple files. Correct me if I am wrong here.
Please do suggest some options with sample code if possible.
You have couple of options:
You can use CompositeItemWriter which calls collection of item writers in defined order so you can define one item writer which will write records based on data from DB and second will count records and write that to another file.
You can write data to a file in first step, finish whole file and save it somewhere, you can save counter of records if that is all you need to StepContext (common batch patterns and scroll to 11.8 Passing Data to Future Steps) and read in new Taskletcounter and save to new file.
If you want to go with option 1 which I think is right choice you can check this example of batch job configuration with CompositeItemWriter