I want to create a pretty printed table from a matrix (or column vector).
For Matlab there are several available functions that can do this (such as printmat, array2table, and table), but for Octave I cannot find any.
So instead of:
>> a = rand(3,2)*10;
>> round(a)
ans =
2 10
1 3
2 1
I would like to see:
>> a = rand(3,2)*10;
>> pretty_print(round(a))
THIS THAT
R1 2 10
R2 1 3
R3 2 1
How can I produce a pretty printed table from a matrix?
(Any available package to do so?)
UPDATE
After trying to follow the extremely obtuse package installation instruction from Octave Wiki, I kept getting the error pkg: failed to read package 'econometrics-1.1.1.tar.gz': Couldn't resolve host name. Apparently the windows version isn't able to use the direct installation command (as given on their Wiki). The only way I managed to get it, was by first downloading the package manually into the current working directory of Octave. (See pwd output.) Only then did the install command work.
pkg install econometrics-1.1.1.tar.gz
pkg load econometrics
Yes, there is a prettyprint function in the econometrics package. Once the package is installed and loaded, you can use it like this:
>> a = rand(3,2)*10;
>> prettyprint(round(a),['R1';'R2';'R3'],['THIS';'THAT'])
THIS THAT
R1 2.000 3.000
R2 3.000 4.000
R3 10.000 3.000
Related
I seem to be having trouble properly combining thousands of netCDF files (42000+) (3gb in size, for this particular folder/variable). The main variable that i want to combine has a structure of (6, 127, 118) i.e (time,lat,lon)
Im appending each file 1 by 1 since the number of files is too long.
I have tried:
for i in input_source/**/**/*.nc; do ncrcat -A -h append_output.nc $i append_output.nc ; done
but this method seems to be really slow (order of kb/s and seems to be getting slower as more files are appended) and is also giving a warning:
ncrcat: WARNING Intra-file non-monotonicity. Record coordinate "forecast_period" does not monotonically increase between (input file file1.nc record indices: 17, 18) (output file file1.nc record indices 17, 18) record coordinate values 6.000000, 1.000000
that basically just increases the variable "forecast_period" 1-6 n-times. n = 42000files. i.e. [1,2,3,4,5,6,1,2,3,4,5,6......n]
And despite this warning i can still open the file and ncrcat does what its supposed to, it is just slow, at-least for this particular method
I have also tried adding in the option:
--no_tmp_fl
but this gives an eror:
ERROR: nco__open() unable to open file "append_output.nc"
full error attached below
If it helps, im using wsl and ubuntu in windows 10.
Im new to bash and any comments would be much appreciated.
Either of these commands should work:
ncrcat --no_tmp_fl -h *.nc
or
ls input_source/**/**/*.nc | ncrcat --no_tmp_fl -h append_output.nc
Your original command is slow because you open and close the output files N times. These commands open it once, fill-it up, then close it.
I would use CDO for this task. Given the huge number of files it is recommended to first sort them on time (assuming you want to merge them along the time axis). After that, you can use
cdo cat *.nc outfile
I am trying to use Xyce for a project and am running into this issue. I am copying the DC sweep netlist example from the Xyce user guide on page 39 to notepad and saving it as test2c.cir. I then copy it over into the Xyce directory and run the Xyce terminal and run the simulate command and am unable to generate any output. Is there a step I am missing to be able to run the Diode Clipper Circuit DC Sweep file? Am I saving the cir file in the right directory? It seems that the circuit "loads properly" and the syntax is fine, but I am not getting a figure output I am expecting. I believe the issue might be that my PC doesnt have a way to open prn files, in that case, how would I fix that?
Diode Clipper Circuit
** Voltage Sources
VCC 1 0 5V
VIN 3 0 0V
* Analysis Command
.DC VIN -10 15 1
* Output
.PRINT DC V(3) V(2) V(4)
* Diodes
D1 2 1 D1N3940
D2 0 2 D1N3940
* Resistors
R1 2 3 1K
R2 1 2 3.3K
R3 2 0 3.3K
R4 4 0 5.6K
* Capacitor
C1 2 4 0.47u
.MODEL D1N3940 D(
+ IS=4E-10 RS=.105 N=1.48 TT=8E-7
+ CJO=1.95E-11 VJ=.4 M=.38 EG=1.36
+ XTI=-8 KF=0 AF=1 FC=.9
+ BV=600 IBV=1E-4)
.END
And this is the directory...
UPDATE:
I changed the Analysis Command to save files as different formats (csv, raw, dat) and it still gives me the same error. Aborts because it cant open test.cir.___. Is the problem maybe something to do with where the program directory is located?
I was informed what a possible fix would be and it worked. The Xyce installation was in a location without admin permission (by default after serial installation). The easiest thing to try that worked was to cd to another directory with the netlist file and run Xyce in that other directory. That generated the output file correctly!
I had some difficulty posing my problem in a way that the Title filter found pleasing. The real problem is that modifying only the GhostPDF.PDD file in the GS9.26 installation in Windows 10 doesn't seem to affect the output after a re-installation using Windows 10 Device Installer.
I print to a networked Sun SPARCprinter 1 which is controlled by Ghostprint (script?) compiled to run on SunOS 4.1.4. This has worked successfully for some years printing output from Windows XP using Adobe's PS driver and a SPARCstation PPD cobbled together from samples found on the net.
I've installed Artifex's 9.26 on Windows 10 and output to an LPR printer (The Sun). The output works, is recognized as PS output by the Sun, but produces a number of FATAL errors.
I need to edit the Windows Ghostscript installation to output PS files which are more suitable for the Sun.
So to my simple question: Do I need to modify anything in the Ghostscript Windows 10 installation other than the Ghostpdf.PPD file?
additional info:
SPARCstation 10 information:
SunOS 4.1.4
arcad# gcc -dumpversion
2.95.2 Note: I had to bootstrap this version up from the early GCC which could be compiled with the SunOS 4.1.4 C compiler. I had the impression I couldn't bring it up any further but could be mistaken.
arcad# gs --help
Aladdin Ghostscript 6.01 (2000-03-17)
Copyright (C) 2000 Aladdin Enterprises ...
Usage: gs [switches] [file1.ps file2.ps ...]
Most frequently used switches: (you can use # in place of =)
-dNOPAUSE no pause after page | -q `quiet', fewer messages
-g<width>x<height> page size in pixels | -r<res> pixels/inch resolution
-sDEVICE=<devname> select device | -dBATCH exit after last file
-sOutputFile=<file> select output file: - for stdout, |command for pipe,
embed %d or %ld for page #
Input formats: PostScript PostScriptLevel1 PostScriptLevel2 PDF
.....
For more information, see /usr/local/share/ghostscript/6.01/doc/Use.htm.
Note: I think this is the most recent GS version I can compile with this gcc version
printcap section:
gp|GhostPrinter:\
:lp=/dev/lpvi0:sd=/var/spool/gsprintspool:lf=/var/spool/gsprintspool/log:\
:mx#0:sh:if=/usr/local/libexec/lpfilter-gps:
Typical spool file - "....." indicates stuff not included here"
arcad# more dfA004DESKTOP-M8C5I86
%!PS-Adobe-3.0
%%Title: Document
%%Creator: PScript5.dll Version 5.2.2
%%CreationDate: 12/14/2018 19:56:8
%%For: jferg
%%BoundingBox: (atend)
%%Pages: (atend)
%%Orientation: Portrait
%%PageOrder: Special
%%DocumentNeededResources: (atend)
%%DocumentSuppliedResources: (atend)
%%DocumentData: Clean7Bit
%%TargetDevice: (Ghostscript) (3010) 815
%%LanguageLevel: 3
%%EndComments
%%BeginDefaults
%%PageBoundingBox: 0 0 612 792
%%ViewingOrientation: 1 0 0 1
%%EndDefaults
.....
%%EndResource
userdict /Pscript_WinNT_Incr 230 dict dup begin put
%%BeginResource: file Pscript_FatalError 5.0 0
userdict begin/FatalErrorIf{{initgraphics findfont 1 index 0 eq{exch pop}{dup
length dict begin{1 index/FID ne{def}{pop pop}ifelse}forall/Encoding
{ISOLatin1Encoding}stopped{StandardEncoding}if def currentdict end
/ErrFont-Latin1 exch definefont}ifelse exch scalefont setfont counttomark 3 div
cvi{moveto show}repeat showpage quit}{cleartomark}ifelse}bind def end
%%EndResource
userdict begin/PrtVMMsg{vmstatus exch sub exch pop gt{[
quires more memory than is available in this printer.)100 500
more of the following, and then print again:)100 485
put format, choose Optimize For Portability.)115 470
ce Settings page, make sure the Available PostScript Memory is accur--More--(2%)
ce the number of fonts in the document.)115 440
ocument in parts.)115 425 12/Times-Roman showpage
Error: Low Printer VM ]%%)= true FatalErrorIf}if}bind def end
2016 ge{/VM?{pop}bind def}{/VM? userdict/PrtVMMsg get def}ifelse
.....
SPARCprinter PDD file which works with Adobe PS in Windows XP:
john#hp2:~/sun-stuff/cups-sparc$ more SPARCprinter2.ppd
*PPD-Adobe: "4.1"
*% PostScript(R) Printer Description File for SPARCprinter
*% Date: 94/01/14
*% Copyright 1994 Sun Microsystems, Inc. All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*% Changed margins on SPARCprinter JAF 3-3-2017
*FormatVersion: "4.1"
*FileVersion: "1.10"
*LanguageEncoding: ISOLatin1
*LanguageVersion: English
*PCFileName: "SPRN.PPD"
*Product: "(SPARCprinter)"
*PSVersion: "(3.000) 0"
*ModelName: "SPARCprinter"
*ShortNickName: "SPARCprinter"
*NickName: "SPARCprinter"
*% ==== Device Capabilities ===============
*LanguageLevel: "3"
*Extensions: CMYK Composite
*FreeVM: "4194304"
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: False
*TTRasterizer: None
*FileSystem: False
..... more of the usual stuff
I don't really understand why you have installed Ghostscript on Windows. Windows is perfectly capable of producing PostScript files all of its own. In addition, the PPD file doesn't actually do very much, it is simply a text file with descriptions of the capabilities of the printer.
So the real problem is, or seems to be, that your SUN setup doesn't like the PostScript being produced by the new version of Windows.
You don't say how you are printing the PostScript file. not how your printer is 'controlled by Ghostscript' (I'm not aware of any product called Ghostprint, there is a GSPrint as part of GSView, but that's really for Windows).
Assuming you are using Ghostscript on your Sparc workstation to drive the pritner, then the most likely problem I would say is that you are using an old version of Ghostscript on the workstation, and it doesn't like the PostScript being generated by the newer version of Windows.
If you had included the transcript from the workstation Ghostscript installation it might be possible to say more but without that I'm rather guessing.
Another possibility is that you are using the ps2write device in Ghostscript to produce PostScript files on Windows. I can't think why you would be doing that, but it sort of fits your description. In that case editing the PPD file will have no effect, because Ghostscript doesn't use it.
Now the ps2write device emits level 2 PostScript, the clue is in the name, and its possible again that your Sparc setup is so elderly that it doesn't understand level 2, or doesn't fully implement it. In which case you will probably get errors. Again, if you were to provide the text of the error messages this would help!
In the latter case, you are frankly out of luck. We dropped support for level 1 PostScript output some time ago, what with level 2 being 28 years old now and level 3 coming up on 20. If you need language level 1 output you will have to go back to a very old version of Ghostscript. Something like 9.07 (from 5 and a half years ago) was the last version that included the pswrite device.
With effort you could take the pswrite device and upgrade it so that it works with the current version of Ghostscript
[EDIT]
My word, that's a really old version of Ghostscript!
You could try building a new version to replace it, but I also don't know if current code will compile on gcc 2.95. It 'should' because we only expect C89, but the third party libraries (which are essential) may very well not compile.
The PostScript file you quoted has been produced by Windows, not by Ghostscript (%%Creator: PScript5.dll Version 5.2.2). So it seems likely to me that your problem is the PostScript being produced by the newer version of Windows doesn't work with your 18 year old version of Ghostscript. That's not actually entirely surprising.
If you look at the DSC comments it says:
%%LanguageLevel: 3
And your Ghostscript information says that it supports language levels 1 and 2. At the time the level 3 spec had only just been published (1999), and clearly the maintainers back then hadn't had time to fully implement it.
Note that the ghostpdf.ppd file is intended for use with Ghostscript as a 'print to PDF' printer along with the RedMon port monitor.
Now its not obvious to me which PPD file you are using, but..... Both the ghostpdf.ppd file and the sparcprinter ppd file have :
*LanguageLevel: "3"
That tells the PostScript driver that it can use language level 3, which your Sparc Ghostscript doesn't support. You could try changing that to:
*LanguageLevel: "2"
and see if that makes a difference (you will have to uninstall the printers from Windows and re-install them with the modified PPD file).
If it doesn't work, the only other thing I can think of is to use the Ghostscript you installed on the Windows system, and preprocess the PostScript file produced by Windows before you send it on. You can use the ps2write device in Ghostscript 9.26 to take in the level 3 file, and produce a level 2 file. It might be a bit bigger, but it ought to work.
To do that on Windows you would use something like:
gswin64c -sDEVICE=ps2write -sOutputFile=out.ps <input.ps>
The file 'out.ps' should then be a level 2 PostScript file. I can't guarantee that the output will then work the old version of Ghostscript on your Sparc, but you stand a chance!
I want to list all processes running on my Windows system using Ruby without installing any additional dependency or library that is not already part of Ruby. I have not found any way to do this online. Is there any clean way to do this from Ruby?
You can use the Kernal::system method to execute a command line argument. For example:
system("tasklist")
Image Name PID Session Name Session# Mem Usage
========================= ======== ================ =========== ============
System Idle Process 0 Services 0 24 K
...
ruby.exe 1336 Console 1 9,100 K
tasklist.exe 944 Console 1 5,332 K
Alternately--as points #Pavling out--you can use [Kernal::`](aka backtick), but some find it less readable. YMMV.
When searching for an occurrence of text in a PostScript file, I receive the following error:
gsapi_run_string_continue returns -21
The API documentation specifies that return codes > 0 are "Error" but doesn't describe it any more specifically. Full error console output below - error occurs twice identically, only one occurrence displayed here.
GPL Ghostscript 9.15 (2014-09-22)
Copyright (C) 2014 Artifex Software, Inc. All rights reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
Displaying DSC file C:/Users/c-toothm/Desktop/PRDFlow12_30_2014_050307/1230ouptut.ps
Displaying page 1
%%[ ProductName: GPL Ghostscript ]%%
%%[ LastPage ]%%
Extracting text using pstotext...
Ghostscript returns error code -21`
--- Begin offending input ---
evice /pop , d
initmatrix [1 0 0 1 0 0] concat colspSet`
0.00 43.32 +
0.94 0.95 +S
(XSFT2200041.img) run
EPSFILE2200041 restore
;
0 0 0 sco 5 Lw N 4950 4742 M 4800 4742 I K
0 0 0 sco 5 Lw N 4950 4752 M 4800 4752 I K
0 0 0 sco 5 Lw N 4950 4762 M 4800 476
--- End offending input ---
gsapi_run_string_continue returns -21`
[duplicate error redacted]
Our production output creates a giant .ps file every day and this error occurs in many, but not all, .ps files when searching for text. Randomly selected .ps files from the web do not throw the error, so this GS build seems OK - definitely a problem with my file.
What "offending input" is being referred to here and what can I do to address it?
I'd need to see the PostScript file to tell you exactly what is wrong, but 'evice' is not a PostScript operator and so that is likely the problem. Also, from ghostpdl/gs/psi/ierrors.h error code -21 is e_undefined which means the interpreter has encountered an undefined token, which is some confirmation that this is the problem.
This could be because the file contains a 'typo' like that (perhaps it should be setpagedevice or something), or it could be because a filter is improperly terminated, or has insufficient data, and consumes extra bytes from the input stream, chewing up your program.
You should start by using the Ghostscript executable and reproduce the error with that (you might also try the display device, to see whether the problem is related to pstotext), that will allow you to give a command line which other people can then duplicate. With that, and a copy of the offending file I can tell you exactly what's wrong, without it, not much hope.
Bear in mind that PostScript is an interpreted programming language, so its pretty much impossible to tell you what's wrong with your program without seeing the code.
FWIW you might like to try the Ghostscript txtwrite device instead of pstotext, the device doesn't rely on tinkering with the language like pstotext does. pstotext is also really old (the last release is coming up on its 11th birthday) and unsupported.....