I am trying to resolve this issue and trying to get it work. What are all the steps of the solution? I really don't know what to do on my Mac terminal
-bash: emacs.profile: command not found
What are you trying to accomplish? If you're trying to open a file named .profile with emacs you'll want to add a space between the command emacs and the file .profile:
$ emacs .profile
If you are typing emacs.profile you will get an error because you are mixing together the command emacs and the file you are trying to edit: .profile. Therefore the solution would be to add a space between them like someone suggested: $ emacs .profile.
On the other hand, if you are typing emacs .profile and you are still getting: -bash: emacs: command not found, this means that you haven't installed emacs yet and your system doesn't recognize that instruction.
Emacs is a very popular text editor and is widely used by technical users, but it is not installed by default.
Solution 1:
If you want to edit a file (in this case ~/.profile) you don't need emacs to do so, you could just use a normal text editor or a pre-installed text editor using your terminal like:
$ vi ~/.profile or $ nano ~/.profile
(Guide to use Vi/Vim text editors) (Guide to use Nano).
Solution 2:
If you want to install emacs to edit that file, you can do so using brew:
$ brew update
$ brew install emacs
And after that you can use:
$ emacs ~/.profile
You can find other ways to install emacs here.
Important Note:
One important thing to consider in this example, is that if you are trying to edit the .profile file (i.e. to set an exported environment variable) you should know that the name of the .profile file might vary from one Mac system to another. The name of this profile configuration file depends on the shell of your system, if you are using bash the name of this profile will be .bashrc or .bash_profile.
Before editing your profile file make sure what is the name of the profile file you are trying to edit. To do so, you can use:
$ cd $HOME
to go to the Home folder and then use:
$ ls -al
to see hidden files (These files starting with . are hidden files). You will find the profile file of your system there.
Related
I have macOS Sierra version 10.12.6
I tried to add a path using the terminal. I entered source ~/.bash_profile and then a text file opened and I entered my path.
But then the terminal stopped responding and bash commands are not recognizable anymore.
If I enter: source ~/.bash_profile nothing happens.
And if I enter any environment related command an error message shows: -bash: printenv: command not found
How can I fix this?
You've probably messed up your path. When you're setting a path it's important to append to it rather than overwrite, or you lose access to all the system paths; /usr/local/sbin, /usr/local/bin, /usr/sbin etc. When setting a new path make sure you use:
$PATH=$PATH:/path/to/add
You can fix this by removing the line from .bash_profile where you overwrote the path. Please paste the contents of .bash_profile if this does not work.
You've replaced $PATH with some of your values and you might not be able to update .bash_profile because of the unavailability of nano. Use the following command to access nano and environment variables.
export PATH="/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin"
After using the command you can use nano ~/.bash_profile to fix the problem.
I am trying to create a permanent alias for my terminal. I put the alias in my ~/.profile, ~/.bashrc, and ~/.bash_profile files, previously empty. When I start a new terminal, bash does not recognize the alias, but if I source any of them, it does. Why are these not getting run when I open a terminal? I am on OSX.
Newer MacOS versions use zsh as the default shell for both Terminal and iTerm2. Run echo $SHELL to confirm if this is the case for you.
Zsh looks for a .zshrc file upon shell startup, so to continue using zsh while sourcing the contents of your bash profile, you can run the following:
echo "source ~/.bash_profile" >> ~/.zshrc
Open a new terminal window for the changes to take effect.
Two things need to happen here when using iTerm to get the loading of dotfiles to work.
First you should add the following to your .bash_profile
[[ -s ~/.bashrc ]] && source ~/.bashrc
Secondly you will need to ensure that in iTerm preferences your terminal is set to launch a login shell.
Hope this helps!
Using the default mac terminal, what worked for me was to add a command to run on start up to source my .bash_profile.
Preferences > Profile > Startup > Add command 'source ~/.bash_profile'
Mac terminal preferences window screenshot
Might be considered to be a bit hacky, but it does the trick.
Adding source ~/.profile to my .bash_profile worked for me.
As of High Sierra, both Terminal and iTerm want to load ~/.profile first. So I suggest you put one line in your .profile to make your Mac work like other Unixes:
source ~/.bash_profile
By editing this one file, you won't have to search through the menus of multiple apps to override Apple's bizarre behavior in each.
As of Catalina the default shell is now zsh. You can change it back to bash with chsh -s /bin/bash and that should load your .profile or .bash_profile
Why are your shell's initialization files not loading?
As with most things, It Depends ™
I recently experienced the same phenomenon and went through the following exercise to resolve it:
I use iTerm. iTerm runs a login shell by default. Verify in iTerm Preferences > General > Command > (*) Login Shell
Therefore, I know that ~/.bash_profile will always be called.
Knowing that, I put the following in my ~/.bash_profile file:
for file in ~/.{bashrc,bash_exports,bash_aliases,bash_functions}; do
[ -r "$file" ] && source "$file"
done
unset file
Notice that I use separate files for .bashrc, .bash_exports, etc. It keeps things separate and simple.
Note also that /etc/profile is loaded first, but since I have never used that system wide init file, I knew that that was not my problem. For details check out $ man bash
So, I started with my ~/.bash_profile file.
I found that when I installed Canopy Express that it's installer replaced the contents of my ~/.bash_profile file with the following content:
# Added by Canopy installer on 2017-04-19
# VIRTUAL_ENV_DISABLE_PROMPT can be set to '' to make the bash prompt show that Canopy is active, otherwise 1
alias activate_canopy="source '/Users/lex/dev/python/User/bin/activate'"
# VIRTUAL_ENV_DISABLE_PROMPT=1 source '/Users/lex/dev/python/User/bin/activate'
p.s. Canopy is an excellent, free python IDE, that I highly recommend.
Fortunately, I backup my ~/.bash* files so restoring that was easy and quickly fixed my issue.
My advice would be to understand the order of calls to your initialization files and start with the first one and work your way through them until you find the problem.
Oh, and you may want to verify which shell you are using (I use bash):
~ $ echo $SHELL
/usr/local/bin/bash
I am guessing you may use another shell, such as bash, tcsh, sh, zsh etc.
Put source .bash_profile into your appropriate 'bashrc' file will make the auto loading recovered, i.e.
.login for tcsh, .bash_profile for bash, .zshrc for zsh
My issue was solved by unchecking Preferences > General > tmux >
Use "tmux" profile rather than profile of the connecting session
Most likely, you need to create the files yourself as they appear not to exist by default. You should give them execute permission to make them run.
~ % sudo chmod 700 ~/.bash_profile
Also, you should check the ownership of the files. They should belong to current user rather than root. Otherwise, you will get permission denied error.
~ % ls -a -l
~ % sudo chown <user_name> ~/.bash_profile
Finally, please note that bash looks in your home directory for .bash_profile, .bash_login, and .profile in order. Bash will stop looking if the first is found.
This means if you have both .bash_profile and .profile files, the .profile will not run.
For more information
Hope this would help you.
Little late to the party but it seems that the file .zprofile is the equivalent to that of .bash_profile when loading zsh. I used this instead to execute a few commands on startup. Of course this only valid for a specific iTerm setup with zsh.
https://zsh.sourceforge.io/Intro/intro_3.html
When running this in terminal:
$ curl -L https://get.rvm.io | bash -s
It seems to work fine, but in the Upgrade Notes at the end it says
* WARNING: You have '~/.profile' file, you might want to load it,
to do that add the following line to '/Users/steven/.bash_profile':
source ~/.profile
And I can't use RVM, getting the error
-bash: rvm: command not found'
I am pretty new to terminal and Ruby, so any help would be greatly appreciated.
When you install rvm its paths get added to ~/.bash_profile. RVM will warn you about this during installation as you noticed. You could run source ~/.profile each time you load the terminal, but that's a pain in the neck.
From the bash docs:
When bash is invoked as an interactive login shell, or as a non-interactive shell with the --login option, it first reads and executes commands from the file /etc/profile, if that file exists. After reading that file, it looks for ~/.bash_profile, ~/.bash_login, and ~/.profile, in that order, and reads and executes commands from the first one that exists and is readable.
What this means is that /.bash_profile is being run, and /.profile and /.bashrc are being ignored.
To resolve this just open .bash_profile and copy the rvm paths at the top and paste them at the top of your .bashrc file. Open a new terminal window and it should be working just fine.
You can either delete .bash_profile, if it's empty, or copy and paste the contents of ~/.profile into it if you choose to keep it.
Do as the instruction said.
From the RVM Troubleshooting page.
If your .bash_profile isn't being correctly loaded on OSX, you need to do one of three things:
Create a file named ~/.bash_profile and add the RVM source line there
Add the RVM source line to ~/.profile
In your terminal preferences, change the shell from the default of /usr/bin/login to /bin/bash.
So, check if you have /Users/steven/.bash_profile in your system. If it is present, open the file and add that line at end of file:
source ~/.profile
else create the file and add it.
So I'm installing some things for coding and personal usage, and I need to run this in the terminal (I'm on Mac if you didn't read the title).
~/.bash_profile
It just says permission denied, Im running OSX 10.8.4 Mountain Lion. How do I bypass this?
On MacOS: add source ~/.bash_profile to the end of ~/.zshrc.
Then this profile will be in effect when you open zsh.
You would never want to run that, but you may want to source it.
. ~/.bash_profile
source ~/.bash_profile
both should work. But this is an odd request, because that file should be sourced automatically when you start bash, unless you're explicitly starting it non-interactively. From the man page:
When bash is invoked as an interactive login shell, or as a non-interactive shell with the --login option, it first reads and executes commands from the file /etc/profile, if that file exists. After reading that file, it looks for ~/.bash_profile, ~/.bash_login, and ~/.profile, in that order, and reads and executes commands from the first one that exists and is readable. The --noprofile option may be used when the shell is started to inhibit this behavior.
If you change .bash_profile, it only applies to new Terminal sessions.
To apply it to an existing session, run source ~/.bash_profile. You can run any Bash script this way - think of executing source as the same as typing commands in the Terminal window (from the specified script).
More info: How to reload .bash_profile from the command line?
Bonus: You can make environment variables available to OSX applications - not just the current Bash session but apps like Visual Studio Code or IntelliJ - using launchctl setenv GOPATH "${GOPATH:-}"
As #kojiro said, you don't want to "run" this file. Source it as he says. It should get "sourced" at startup. Sourcing just means running every line in the file, including the one you want to get run. If you want to make sure a folder is in a certain path environment variable (as it seems you want from one of your comments on another solution), execute
$ echo $PATH
At the command line. If you want to check that your ~/.bash_profile is being sourced, either at startup as it should be, or when you source it manually, enter the following line into your ~/.bash_profile file:
$ echo "Hello I'm running stuff in the ~/.bash_profile!"
No need to start, it would automatically executed while you startup your mac terminal / bash. Whenever you do a change, you may need to restart the terminal.
~ is the default path for .bash_profile
I was getting this error on zsh(mac os Big Sur 11.3), This is how i solved this :-
Go to Terminal.
cd /users/<yourusername>
Once you reach here issue a command :
ls -al
You will see a lot of files and one specific file .zprofile. This is your user profile. We need to edit this.
After this we need to edit the file. Issue the below command :
nano .zprofile
Once you issue this command file will be opened for edit. Add the path details for maven.
M2_PATH="/Users//code/apache-maven-3.8.1/bin" //add your path of maven diretory
PATH="${PATH}:${M2_PATH}"
export PATH
press ctrl + X and save the file.
Issue command after saving the file :
source .zprofile
Once done, you will be able to run the mvn command.
If the problem is that you are not seeing your changes to the file take effect, just open a new terminal window, and it will be "sourced". You will be able to use the proper PATH etc with each subsequent terminal window.
I don't know what has happened, but in my Terminal on Mac OSX 10.5 it can no longer find my sudo command, or find command, etc. They are there because if I put /usr/bin/sudo or /usr/bin/find it works fine...
My .bash_login file looks like this:
export PATH="/usr/local/bin:/usr/local/sbin:/usr/local/mysql/bin:/usr/bin$PATH"
My .bash_profile file looks like this:
export PATH="/Library/Frameworks/Python.framework/Versions/Current/bin:/Library/Python/2.5/site-packages/django_trunk/django/bin:/usr/local/mysql/bin:/usr/bin/sudo$PATH"
I'll say now, I don't really know what I'm doing with the Terminal. I'm just a beginner to it all, and I must of done something for the environment variables (is that what they're called?) to be lost. I presumed I'd just have to make sure the /usr/bin/ path is in my bash files, but they are, and it doesn't seem to work. Please help!
Also, when I do use the /usr/bin/find command, it says "Permission denied" to me, even though I am logged into Mac OSX as the System Administrator account. I don't understand.
Any help would be grand. Thank you - James
It looks like both of your PATH exports are malformed:
export PATH="/usr/local/bin:/usr/local/sbin:/usr/local/mysql/bin:/usr/bin$PATH"
The end bit there won't work. It should be:
export PATH=/usr/local/bin:/usr/local/sbin:/usr/local/mysql/bin:/usr/bin:$PATH
Notice the colon before '$PATH'? It's important ;)
Also, the double quotes are not necessary.
If this doesn't work, we will need more information. It is possible that something else is modifying your path even after your shell configurations are loaded.
Can you post the results of:
$ echo $PATH
Configuration files are not always a good indication of the current environment variables, since they are modified by many programs and files, all across your system. To see all of your environment variables, you can run:
$ env
This should fix the problem completely and permanently.
first, export environment paths by using below command in the terminal.
export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
now you have the commands you want. (eg. try ls. You'll see the command is working). But this is only for the current session. If you close the terminal and open a new one, you will have the previous issue. To make this change permanent, use below command,
go to home directory
cd ~
open .bash_profile file in nano / vim (I'm using nano here)
nano .bash_profile
This will open up nano editor. In a new line, paste the following;
export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:$PATH
press 'control'+'o' to save (WriteOut) and 'control'+'x' to exit nano.
All done ! Now try the commands.
Check out --- http://www.sweeting.org/mark/blog/2008/05/26/mac-os-x-tip-setting-path-environment-variables
I went trough the same issue and here is how I solved it.
First of all I reverted the file to its original doing this way
/usr/bin/nano ~/.bash_profile
In my case I was not able to make work any command alias. Even vi or vim didnt work without specifying the full path of that command.
If nano is not installed just replace nano in the command by the editor installed
After that just restart the computer. In my case as I said bellow I could not use any command. When trying to do /usr/bin/source ~/.bash_profile
that command failed. So I had to restart the OS and it worked