Im running my jmeter script using a SH file having below commands,
#! /bin/sh
JMETER_HOME=/jmeter/DummyTest/Jmeter4/apache-jmeter-4.0
#PATH=$PATH:JMETER_HOME/bin
#export PATH
echo $PATH
cd $1
echo current dir is `pwd`
echo "=== START OF run-load-atcom_scripts.sh SCRIPT ==="
$JMETER_HOME/bin/jmeter.sh -n -t /jmeter/DummyTest/TrialScript1.jmx
while running im getting below error
Uncaught Exception java.lang.IllegalStateException: Failed calling setupTest. See log file for details.
In this case im not getting jmeter.log file creating or updating in jmeter bin folder.
Can anyone help me in this.
Got to fix this ,i have given the command -j /path/to/logfile/logfile.log
which works.
Apart from this anyways if anyone comes up with any solution(rather using -j ,automatically in bin folder ) would be helpful for everyone
Related
I am running a python file in a remote location from my local machine. I am putting a main.sh file in the remote dir where the python.py file is. However, I cannot find a way to handle errors in case they occur while running the python.py.
For example:
python.py:
print(a)
I want to have a log.txt file where the error message: ''a not defined in line...'' is shown.
I tried this in the main.sh:
python3 python.py> log.txt
But this only gives output in the log.txt if the py file successfully runs.
Try python3 python.py 2> log.txt for only errors or if you want full output try python3 python.py &> log.txt
The following simple script is apparently not so simple.
The entire script appears to work properly until I get to the npm command.
I have looked at the numerous threads here, but none of the solutions fix the issue.
Each of the scripts is kicked off by a parent script.
Here is the parent:
#!/bin/bash/
authGogglesPath='/c/sandBox/amazon-sandbox/CraigMonroe/platform.shared.auth-goggles'
echo $'\nExecuting node commands for local running solution...\n'
#echo $(pwd)
# run the scripts
bash edge.sh ${edgePath} &
exec bash
I checked my path in the terminal and it's aware
I thought that it might be running as another associated profile so I tried the full path to npm, but the same results.
#!/bin/bash/
authGogglesPath='/c/sandBox/amazon-sandbox/CraigMonroe/platform.shared.auth-goggles'
echo $'\nExecuting node commands for local running solution...\n'
#echo $(pwd)
# run the scripts
bash edge.sh ${edgePath} &
exec bash
That calls edge.sh with a string path for arg (more for later)
edge.sh is another simple script
#!/bin/bash/
PATH=$1
#echo $PATH
if [ -z "${PATH}" ] ; then
"PATH is empty! Aborting"
exit 1
fi
cd "${PATH}"
echo $'\nExecuting Edge...\n'
npm run dev
Each time I run this I'm receiving:
$ bash edge.sh /c/sandBox/amazon-sandbox/CraigMonroe/platform.shared.auth-goggles/
Executing Edge...
edge.sh: line 13: npm: command not found
cmonroe#LP10-G6QD2X2 MINGW64 ~/cruxScripts
$
When in the terminal and manually navigating to the directory and running the command it works properly. Where the edge builds and starts.
Unless npm is in /c/sandBox/amazon-sandbox/CraigMonroe/platform.shared.auth-goggles/, doing PATH=$1 means your PATH only refers to that one folder.
No more /usr/bin or any other folders your bash session might need.
As commented, adding to the PATH should work
PATH="$1:${PATH}"
I have set up the google assistant sdk on my Raspberry Pi as shown here: https://developers.google.com/assistant/sdk/prototype/getting-started-pi-python/run-sample
Now in order to re-run the assistant I have worked out the two commands are
$ source env/bin/activate
and
(env) $ google-assistant-demo
however I want to automate this process into a script that I can call from rc.local (followed by an &) in order to make the assistant boot from start up.
However if I run a simple script
#!/bin/bash
source env/bin/activate
google-assistant-demo
the assistant does not run inside the environment
my environment path is /home/pi/env/bin/activate
How can I have it so the script starts the environment and then runs the assistant inside the virtual environment?
EDIT: In the end I went with the following method:
using this as a base :
https://youtu.be/ohUszBxuQA4?t=774 – thanks to Eric Parisot
You will need to download the src file he uses and extract its contents into /home/pi/src/
However with a few changes.
I did not run gassist.sh as sudo, as it gave me the following error:
OpenAlsaHandle PcmOpen: No such file or directory
[7689:7702:ERROR:audio_input_processor.cc(756)] Input error
ON_MUTED_CHANGED:
{‘is_muted’: False}
ON_START_FINISHED
ON_ASSISTANT_ERROR:
{‘is_fatal’: True}
[7689:7704:ERROR:audio_input_processor.cc(756)] Input error
ON_ASSISTANT_ERROR:
{‘is_fatal’: True}
Fix: DO NOT run as sudo
If gassist.sh gives an error about RPi.GPIO you need to do https://youtu.be/ohUszBxuQA4?t=580:
$ cd /home/pi/env/bin
$ source activate
(env) $ pip install RPi.GPIO
(env) $ deactivate
And then I did sudo nano /etc/profile
and the appended this to the end:
#Harvs was here on 24/06/17
if pidof -x "gassist.sh" >/dev/null; then
echo ""
echo "/etc/profile says:"
echo "An instance of Google Assistant is already running, will not start again"
echo ""
else
echo "Starting Google Assistant..."
echo "If you are seeing this, perhaps you have SSH within seconds of reboot"
/home/pi/src/gassist.sh &
fi
And now it works perfectly, and inside the virtual enviroment :)
found solution here :https://raspberrypi.stackexchange.com/a/45089
Create a startup shell script in your root directory (I named mine "launch"), make it executable too :
sudo nano launch.sh
I wrote it that way :
#!/bin/bash
source /home/pi/env/bin/activate
/home/pi/env/bin/google-assistant-demo
Save the file
Edit the LXDE-pi autostart file
sudo nano /home/pi/.config/lxsession/LXDE-pi/autostart
Add this to the bottom of that file
./launch.sh
reboot
Scripts run from rc.local execute in the root directory (or possibly in the home directory of the root user, depending on the distro, I think?)
The easy fix is to code the full path to the environment.
#!/bin/bash
source /home/pi/env/bin/activate
google-assistant-demo
# or maybe /home/pi/google-assistant-demo
There is no need to explicitly background anything in rc.local
In the end I went with the following method:
using this as a base : https://youtu.be/ohUszBxuQA4?t=774 – thanks to Eric Parisot
However with a few changes.
You will need to download the src file he uses and extract its contents into /home/pi/src/
I did not run gassist.sh as sudo, as it gave me the following error:
OpenAlsaHandle PcmOpen: No such file or directory
[7689:7702:ERROR:audio_input_processor.cc(756)] Input error
ON_MUTED_CHANGED:
{‘is_muted’: False}
ON_START_FINISHED
ON_ASSISTANT_ERROR:
{‘is_fatal’: True}
[7689:7704:ERROR:audio_input_processor.cc(756)] Input error
ON_ASSISTANT_ERROR:
{‘is_fatal’: True}
Fix: DO NOT run as sudo
If gassist.sh gives an error about RPi.GPIO you need to do https://youtu.be/ohUszBxuQA4?t=580:
$ cd /home/pi/env/bin
$ source activate
(env) $ pip install RPi.GPIO
(env) $ deactivate
And then I did sudo nano /etc/profile and the appended this to the end:
#Harvs was here on 24/06/17
if pidof -x "gassist.sh" >/dev/null; then
echo ""
echo "/etc/profile says:"
echo "An instance of Google Assistant is already running, will not start again"
echo ""
else
echo "Starting Google Assistant..."
echo "If you are seeing this, perhaps you have SSH within seconds of reboot"
/home/pi/src/gassist.sh &
fi
And now it works perfectly, and inside the virtual enviroment, and in boot to CLI mode! :)
I've created a bash script to take a backup of a folder to a remote location via cygwin cron however I'm experiencing an issue. The script at the end will execute a command like this one
/usr/bin/tar -zcvf //192.168.1.108/Backup/Folder/Folder.Backup.2015-12-03.1219.tar.gz /cygdrive/d/Folder
Although when I use the command it produces and then executes in the context of a cygwin bash shell it works correctly, when I run it via a cron job it fails because it doesn't recognize the remote location path correctly. If I change the path to a local /cygdrive location or to ~/ it works correctly even via cron so somehow I'm thinking that the network shares are not being correctly viewed by cygwin in it's cron environment.
Any ideas how I could solve this issue?
Here's my bash script
#!/usr/bin/bash
#the path needs to be set to execute gzip command or tar command breaks
export PATH=$PATH:/usr/bin:/bin:/usr/local/bin:/usr/local/sbin:/sbin
if [ $# -ne 3 ]
then
echo "USAGE: backup-clients <path> <name_prefix> <source>";
exit 1;
fi
DATE=`date "+%Y-%m-%d.%H%M"`;
FILEPATH="$1/$2.Backup.$DATE.tar.gz";
COMMAND="/usr/bin/tar -zcvf $FILEPATH $3";
echo "COMMAND="$COMMAND;
eval $COMMAND;
Which I run with the command
/usr/bin/bash /cygdrive/d/mybackupscript.bash "//192.168.1.108/Backup/Folder" "Folder" "/cygdrive/d/Folder"
I really appreciate any help you can provide.
while executing the following .prog script No such file or directory is thrown
#!/usr/bin/ksh
param1="$5"
echo "Parameter1 : $param1"
l_outgoing="outgoing"
l_out_path="$INTERFACE_HOME/$l_outgoing"
echo "$l_out_path"
cd $l_out_path
The script works fine till echo "$l_out_path" and it gives out the correct directory
The Script was made in Windows and migrated to Unix Sever.
using the command dos2unix worked!!
No other changes was done