I was coding with razorpages when randomly about 2 days ago the razor pages now display boths the cshtml and cs right away. earlier I could expand the cshtml to get to the cs file and i think it was a more compact that way
i think its options somewhere in tools->options->environment () but there are so many
after a few different google searches I found nothing helpful.
here is a picture of the problem:
earlier I could expand the cshtml to show the .cs files now i just see all of them and its kind of overwhelming.
enable file nesting in solution explorer
They're not being nested, is all. It's literally two separate files, Visual Studio just recognizes that it's a Core project, and then shows them nested, since it understands that they're related. If that's not happening, then that means Visual Studio doesn't recognize it as a Razor Page, which could be a problem with VS, the project, or something else entirely. It's essentially impossible to say what the issue might be, so you'll just need to try stuff. A few things I can think of to try:
If you're not using VS 2019, upgrade. Ultimately, this is part of the ASP.NET Core tooling, and best version of that is always going to be in the latest release.
Verify that you solution is building correctly. You might also consider deleting all bin and obj directories and rebuilding to ensure the build is truly up to date.
Close Visual Studio completely and re-open it. You may consider restarting as well. (You've probably already tried this though).
Try running Visual Studio in "safe-mode", which essentially just means disabling all the extensions you have installed. You can either manually disable all your extensions and then restart or close Visual Studio and start it via the command like with devenv /safemode. If this fixes the issue, then there's an extension causing issues. You'll probably need to just disable each one by one to see which on is causing the problem, and then either remove it or see if there's an update that corrects it.
If all else fails, repair Visual Studio. Run the intaller, and click the "More" link under the installation you're working with. Then click "Repair".
Related
I am getting an inconsistent error with Visual Studio 2015 that is severely hampering my productivity.
I am working on a very large application that I have pulled down from TFS. Sometimes when working I will try and save the file that I was working on, and have the asterix not go away and the file not save. This is despite running the application in Administrator.
Sometimes the solution is simply to rebuild the project and then try to save, however when this doesn't work I need close down visual studio and start up again, losing all my saves anyways.
This isn't too bad when I am working on .net files because the problem happens a lot less, and the solution is almost always to just rebuild, which is much better than having to re boot vs. However recently I have been working on javascript files within visual studio, and with them I get about one save, then the problems comes up, and rebuilding doesn't fix issue, causing me to have to reboot visual studio every save I make...
I have tried searching online for people who have faced a similar issue, or asked around my work, and no one seems to have ever had a similar problem. So hopefully, for my sanity's sake, someone knows what the heck is going on with my visual studio. Thanks!
I am currently running VS2019 16.7.2 and sometimes it just refuses to save no matter what I do. I try Ctrl + S, File -> "Save all", closing the window (which causes the changes to be lost) but nothing works.
Though for some reason when first I press the File -> "Save ... as" option in the menu and then cancel it, that releases the "save lock" and suddenly I am able to save again. Not really a satisfactory solution but at least all changes aren't lost. Maybe it will work on other versions as well?
I will give an answer to a problem which might not be exactly the same as the one reported by the author, but it is fairly close, and people searching for a solution to this problem are likely to arrive to this question.
In my case, in my entire solution containing thousands of files, there was only one particular file that Visual Studio was consistently failing to save when needed. As a result, after each commit, the "Git Changes" tab would not appear completely empty. All files would be committed, except this one file, which would appear as still uncommitted. So, I would have to manually save it and then amend the last commit in order to arrive at a completely empty "Git Changes" tab.
I thought that the problem might be due to some discrepancy between the letter case of the filename on disk (which is what the "Git Changes" view reports) and the letter case of the filename in the visual studio project file (which is what the "Solution Explorer" view reports) but it turns out that this was not it.
After much troubleshooting, I discovered that the following sequence of magical incantations solves the problem, I have no idea why:
In "Solution Explorer" locate the problematic file.
Rename the problematic file to something else.
Commit (with amend if you wish) the file.
Rename the file back to its original name.
Commit (with amend) the file again.
Restart Visual Studio.
The last step of restarting Visual studio is not strictly speaking necessary, but it is useful in case you have a letter case mismatch, because Visual Studio seems to be somehow caching filenames, (or at any rate not detecting that the capitalization of a filename has changed,) and restarting it makes it come to its senses.
I realize this is an old question but I had a similar problem with a solution file I had upgraded from Visual Studio 2015 to Visual Studio 2022. I was unable to save any changes to the solution, although the file was writable in notepad.
Deleting the section in the solution file as suggested by Richard Stanton's workaround fixed it for me!
developercommunity.visualstudio.com Workaround
Delete the following section from the solution file:
ProjectSection(FolderStartupServices) = postProject
{B4F97281-0DBD-4835-9ED8-7DFB966E87FF} = {B4F97281-0DBD-4835-9ED8-7DFB966E87FF}
EndProjectSection
I am by no means a visual studio expert. However I have done some searching on this topic and cannot find anything to help me.
I'm working on a VS 2010 web application. We are using TFS 2012 for source control. I wouldn't be suprised if this is causing my issue so I make a special mention of it.
The issue I'm having is every morning after I open the project I have to go into Tools / Extension Manager and search online and add JScript Editor Extensions. When I open the project the next day it's gone and I have to add it again. (I think sometimes it does this right in the middle of coding - my Javascript window changes size and loses formatting)
An extension that stays every day regardless is NuGet package manager, so it's not removing every extension.
I suspect that when I get latest from TFS it's overwriting the solution or project which contains the reference to the extension but I haven't been able to verify this.
Can anyone tell me why extensions would be removed? Are these a local user setting or are they contained in the project file?
Taking a step back, my real problem is complete lack of integration between C# and Javascript in the web programming world. I need all the help I can get on the Javascript side.
There were a number of issues with buggy extension addins. To clarify are you using visual studio 2010 with tfs 2012 plugin?
The recommended process for identifying the buggy extension is to disable the extensions one at a time until the buggy one is isolated.
the source control shell for tfs2012 can be installed as a separate shell if needed.
I suspect the script editor extensions however.
Since I changed my windows password I can no longer type into a checked out file in Visual Studio 2013! Where before I just needed to start typing and it would check out the file in the background, now it won't even allow me to type into the file after I manually check the file out, from the solution explorer! It's as if VS 2013 is ignoring the keyboard on the project under source control. It's fine for other projects even project's under source control!
I think I remember seeing this before with older versions of Visual Studio and resolved it with a "Go online" option but I can't see that option in VS 2013, or the project is not "off line" so the option is not available.
This is obviously related to the TFS setting on the project but I simply cannot get past it. I am blocked and would appreciate any suggestions.
I suspended Resharper and restarted Visual Studio 2013. Once I reopened it the problem was gone. Resuming Resharper caused the problem to emerge again.
The solution is quite large so maybe that is it. Before putting Resharper into suspend mode I tried switching off code analysis thinking the workload is just too great, but that didn't help. The suspend did though. I hope this helps anyone else with the same issue.
All I have to do now is to figure out how to get Resharper back in the game without the problem coming back. We rely on Resharper as it is an wonderful tool. Since the solution has many projects in it, I am going to try create a smaller solution with my web project and just reference the other projects as assemblies. Maybe that will help
Update:
Clearing the resharper cache as suggested by Alexander resolved the original issue.
I'd like to add Alexander's comment as answer, since it helped me exactly to solve the issue:
Clean R# (ReSharper) caches by deleting all folders (and files) from the path
C:\Users\{User Name}\AppData\Local\JetBrains\ReSharper\v8.2\SolutionCaches\
and then reopen the solution.
Note: (Thanks to Antak for providing this info!)
You can paste
%userprofile%\AppData\Local\JetBrains\ReSharper\v8.2\SolutionCaches
into file explorer's path textbox (open it via Win+E, or use Win+R and paste the path into the command window), this will resolve the physical path into your user's directory automatically.
This happened to me. All my JavaScript files went "dead." By "dead" i mean that all the normal VS intellisense coloring/functionality was gone; js files were un-editable, although Resharper was still working sort of; all other non-js files seems to be normal. In addition to Resharper, I had also previously installed Web Essentials and was using both tools.
First, I cleared the R# caches as mentioned above by Alexander. After restarting VS, this DID NOT work. JS files still dead.
Then i disabled Web Essentials. Then I restarted. THIS WORKED.
I then re-enabled Web Essentials, restarted again, and all seems to be OK. Am crossing my fingers....
I too had this problem with the latest version of ReSharper (9.0.0.0), but clearing the cache as stated above did not work. I actually had to go into my ReSharper options (ReSharper -> Options -> General) and click the "Clear Caches" button. Once I did this and restarted VS everything is working again.
Try: /safemode
I had a similar problem where I could not edit most of my files, but I could edit *.ps1 files.
I don't have TFS, I do have resharper and other plugins.
What worked for me was:
Start visual studio in safe mode: C:\..\IDE>devenv /safemode
Close VS.
Start VS normally.
That probably has the same effect as suspending and resuming resharper, but I'm not sure which plugin could be causing the problem. If you are having trouble this is something you could try.
I hit the refresh(restart) and it solved a similiar problems so maybe you better try that before an IDE restar. ctrl shift F5
I've been developing a project for a while, and we have started a "documentation" folder in the Visual Studio 2008 solution so that we can keep the developer documentation (and a few other useful files) in there (it's one of Visual Studio's solution folders, rather than a project). We're also using the AnkhSVN plugin so these files get copied to Subversion.
However, every time I save any of the files, Visual Studio automatically removes it from the solution, so I have to add it back in,and then close Word again without saving.
I'd have thought this was a fairly easy problem to solve, but the past three weeks (and reading many spurious results on Google for almost every search query I can think of that might be relevant) seem to have proved me wrong.
Does anyone have any ideas how to stop this behaviour?
I don't know if this still happens with VS2013, but for VS2010 here is a detailed explanation on the cause and a work-around:
Word files disappear from "Solution Items" in VS2010
Are you sure the files are removed and not just hidden? I had a similar thing with non-code files.
Showing and Hiding Hidden Files in Visual Studio 2008
Is there a way to tell Visual Studio 2005 to just ignore source control binding when opening a solution? I sometimes need to load a solution for which I don't have access to the source control server, but Visual Studio insists on trying to connect anyway, meaning I have to click "temporarily work offline in disconnected mode" for every project in the solution (of which there are about 20) as it loads. For some reason, it also tries to check each project out immediately after I've told it to work offline, so I have to click past that dialog box too.
As I will never need to edit anything in this solution, is there any way I can open it and have Visual Studio just ignore the fact it has source control bindings in it?
Edit: Ideally, I'd like a way to do this without having to change the project/solution files. They change fairly frequently, so I'd have to redo any changes every time there was a new version (otherwise I'd just unbind them once and it wouldn't be a problem).
Thanks for the replies so far.
The source control bindings are stored in Visual Studio solution file (.sln). For TFS for example, it contains a global section for TFS information and the solution projects added to TFS. You can edit the solution file to remove these bindings manually. I would suggest making a copy of the solution file first. However, I would recommend removing bindins via Visual Studio. Open your solution and go through the offline scenario. Then go to File/Source Control/Change Source Control (VS 2008) to bring up the UI that shows you the source control bindings in your solution. There you can manage the bindings including unbinding them. Once unbound, the next time you open the solution, VS should not have a need to access the source control.
I've been looking for a way to disable Integration between SourceSafe 2005 and Visual Studio 2008. We are forced to use SourceSafe being in a corporate environment and all. SourceSafe is fine on its own if you treat it like a baby. As soon as you try to do anything approaching useful it starts to break. God forbid you try to use the integration with Visual Studio. Being that I didn't want the "Bindings removed" so that it doesn't confuse other devs on the team I needed to be able to tell Studio to ignore the solution and project bindings and continue on it's merry way.
I followed the registry hack suggested in the following post
Removing SourceSafe Integration from Visual Studio 6
Studio did what I wanted...sort of. It removed the SourceSafe integration. However when I opened up a source controlled solution it asked me if I wanted to remove the bindings.
"the projects will be treated as not under source control"
No I don't want you to remove the bindings from the files, I want you to IGNORE them. This dialog pops up every time you open the solution/project file and there is no way around it.
My solution at the moment seems to have worked...for now.
File->Source Control->Change Source Control...->Disconnect
I hope this helps anyone else in the position of having to use SourceSafe but can't remove the bindings from the files themselves. WHY, Microsoft, WHY would you put the bindings in the files themselves?
/rant