I'm trying to install GMP on my CodeBlocks application using MINGW32.
For this i use the command : ./configure *--prefix=/c/"Program Files (x86)"/CodeBlocks
The configuration advance until the step "checking whether stripping libraries is possible..." and then it seems an endless loop is started...
Therefor the configuration is not working and i cannot continue the installation.
Check config.log to see if you can determine where it is stuck. You should be able to find the line numbers of the configure script where it's in a loop.
Try to run which strip and strip --version to check which stripis found in your PATH and if it's really GNU strip from Binutils.
Also, avoid paths with spaces in them when using ./configure, so maybe try with a different --prefix path.
Related
A user of xnec2c was trying to build on OSX and had autoconf issues because PKG_CHECK_MODULES could not be found since MacPorts puts it in a funny spot.
The user made autoconf work like so:
ACLOCAL_PATH=/opt/local/share/aclocal ./autogen.sh
ACLOCAL_PATH=/opt/local/share/aclocal ./configure
I would like to make it build on OSX without special user path hacks for ACLOCAL_PATH. Can that be done?
I started writing a possible fix below and realized it could an xyproblem so posed the question just above. However, if this starts any gears turning, then I would be open to a bit of special-casing for OSX:
For example, would it be possible (if not advisable) to detect:
Is PKG_CHECK_MODULES missing?
If so:
is it OSX?
Is [ -d /opt/local/share/aclocal ] true?
Does the macro exist there?
While aclocal has a few ways of appending to its search path (see https://www.gnu.org/software/automake/manual/html_node/Macro-Search-Path.html), you cannot modify that macro search path using code in configure.ac:
When the shell code in configure is run, it is too late, as the available macros have already been expanded. When autoconf (is it autoconf or something else? anyway, m4 called from autoreconf) generates configure from configure.ac by having m4 expand the macros it is also too late: aclocal has already collected the m4 macros it could find.
So what you would need is a step before the autoreconf run - which is beyond what I would consider a buildsystem needs to do.
What you can do: Put static strings into the top level Makefile.am file like e.g.
ACLOCAL_AMFLAGS = -I auto-m4 -I project-m4 -I /opt/local/share/aclocal
(this example uses auto-m4/ with AC_CONFIG_MACRO_DIR([auto-m4]) for the *.m4 files automatically put there by autoreconf/autopoint/libtoolize and project-m4/ for the project specific *.m4 files).
Of course, you should already have
m4_pattern_forbid([PKG_CHECK_MODULES])dnl
before invoking PKG_CHECK_MODULES for the first time so that the problem of the missing *.m4 file will be detected at the earliest possible time, i.e. when autoconf is about to generate a configure file with PKG_CHECK_MODULES unexpanded.
You could use some m4 code to print a lengthy error message if PKG_CHECK_MODULES is not defined. Something along the lines of (untested)
m4_ifndef([PKG_CHECK_MODULES], [dnl
m4_fatal([Could not find the PKG_CHECK_MODULES macro. Check that the pkg.m4 file is available and aclocal finds it (e.g. set ACLOCAL_PATH=/opt/local/share/aclocal).
])dnl
PKG_CHECK_MODULES([FOO], [foo])
Personally, I would go with m4_pattern_forbid and make sure OSX builds with homebrew work OOTB, and then document idiosyncrasies for building on rare and buggy systems like OSX with macports or SunOS without GNU tools in the INSTALL file.
Isn't it a bug in macports/OSX that aclocal there cannot find its *.m4 files? Shouldn't there be a dirlist file pointing to /opt/local/share/aclocal? Or perhaps they macports users should have an aclocal in their PATH which actually finds the macports macro files?
In any case, I would not consider it my build systems's job to fix a buggy system. You need to draw the line somewhere.
i'm tackling the problem of compiling vmime library using this guide with MinGW. As this guide states, first i need to compile libiconv library with these commands(yep i'm new to MinGW):
$ tar -xvvzf libiconv-1.13.1.tar.gz
$ cd ./libiconv-1.13.1
$ ./configure --prefix=/mingw #configures makefile, use /mingw as a prefix
$ make
$ make install
after all this commands the libiconv.dll.a appears in libiconv-1.13.1\lib.libs
directory.Also after compiling process appears the /bin directory and there is only 1 library - libcharset-1.dll.
My question is - how do i know if the library properly compiled, without errors?Should i check the output from the MSYS console? there are tons of checks, it seems pretty boring task. Thanks in advance, glad to hear any advice!
You're building a GNU Autotools package.
./configure generates the makefile(s) needed by make to build the library
on your particular system. If it thinks the library can't be built on your particular
system, it will tell you why. It might just miss some reason why you can't build
the library, because the library developer(s) have to script the tests that it runs, and might
just overlook some necessary ones. But if it misses something then make will fail.
make executes all the commands necessary to build the library on your system. If any of them fail,
then make will fail, and will tell you so unmistakably.
Likewise make install does everything necessary to install the library
under the default or specified prefix path.
Classically, unix tools (like the autootols) will inform you when something goes wrong
and not inform you that nothing went wrong.
I'm working on a Windows 7 computer at work and want to use the libpostal package. Unfortunately, it's apparently not available for Windows, so I'm trying to configure it through Cygwin and I'm SO close. The last step is to install snappy from Google. Again, not available on Windows...
My assumption (based on nothing) is that I can just download the tarball and build it from source, right? I tried that, and I think it worked? But a) I don't know how to tell, and b) if it did, I don't know how to tell ./configure in libpostal to find it.
In order to build it from source, I downloaded the tarball and saved it in the folder that Cygwin reads as my home, which is C:\cygwin64\home\brittenb\. From there, I ran bash autogen.sh, which created the ./configure that I needed. So I ran that and while some responses to the checks were no, it seemed to run fine. I then ran make and make install. Nothing seemed out of place, so my assumption is that it did what it was supposed to do. I just have no idea where to go from here.
Here is the output from ls after I run everything:
aclocal.m4 snappy.cc
AUTHORS snappy.h
autogen.sh snappy.lo
autom4te.cache snappy.o
ChangeLog snappy.pc
compile snappy.pc.in
config.guess snappy_unittest.cc
config.h snappy_unittest.exe
config.h.in snappy_unittest-snappy_unittest.o
config.log snappy_unittest-snappy-test.o
config.status snappy-c.cc
config.sub snappy-c.h
configure snappy-c.lo
configure.ac snappy-c.o
COPYING snappy-internal.h
depcomp snappy-sinksource.cc
format_description.txt snappy-sinksource.h
framing_format.txt snappy-sinksource.lo
INSTALL snappy-sinksource.o
install-sh snappy-stubs-internal.cc
libsnappy.la snappy-stubs-internal.h
libtool snappy-stubs-internal.lo
ltmain.sh snappy-stubs-internal.o
m4 snappy-stubs-public.h
Makefile snappy-stubs-public.h.in
Makefile.am snappy-test.cc
Makefile.in snappy-test.h
missing stamp-h1
NEWS testdata
README test-driver
ls /usr/local/bin shows nothing, but ls /usr/local/include shows:
snappy.h snappy-c.h snappy-sinksource.h snappy-stubs-public.h
So... my question: did it work? Why does ./configure in libpostal say it can't find snappy? Thanks in advance.
The snappy dependency has been removed as of release 1.0.0. I made changes to the source and make and config so that it will build on MinGW.
Get it in my repository:
https://github.com/BenK10/libpostal_windows
Note that this is not the complete source since not everything had to be changed. I would suggest merging my changes with the official libpostal distribution to make sure you've got everything. Also, there are some extra DLLEXPORTs in some source files that I haven't removed yet, and the part in the Makefile that builds the executables like address_parser.exe was removed because some porting is necessary to build those programs on Windows. You can write your own using the DLL you'll get in the Windows build and the original source as a reference.
Check the return code from make install ($?). If it is zero, make install succeeded.
snappy looks like a library, so maybe it doesn't install anything in /usr/local/bin. The library is probably installed into /usr/local/lib.
I unpacked and compiled Ruby 2.1 and installed several support tools.
But OpenSSL won't install while I have libssl-dev installed.
I get this error when making the openssl support:
make: *** No rule to make target `/thread_native.h', needed by `ossl.o'. Stop.
What to do?
I ran into the same problem. Turns out, the last line of the extconf.rb-generated Makefile reads
ossl.o: $(top_srcdir)/thread_native.h $(top_srcdir)/thread_$(THREAD_MODEL).h
However, top_srcdir isn't defined anywhere in the Makefile.
I figured out where the missing header files were by running
sudo find / -name thread_native.h
which returned (approximately)
~/.rbenv/versions/2.1.0/thread_native.h
There's a line at the top that says something like
topdir = ~/.rbenv/versions/2.1.0/include/ruby-2.1.0
so I just added a line below it pointing to the directory from the find:
top_srcdir = $(topdir)/../..
After all that, I did a make clean in the ext/openssl directory and then make ran without the error.
Why don't you use rvm? It compiles, configures, installs and manages the chosen version of the most popular ruby interpreters for you.
Anyway, try using --with-openssl-dir.
The problem:
I can't seem to install perl modules correctly, JSON-2.53 in particular.
I have done the following:
Searched for a similar problem and tried its solution - did not work.
perl ".../config.h, needed by `Makefile'" not working after OSX Lion upgrade
Installed XCode command line developer utilities (c compiler, make, etc)
Read version compatibility documentation on this particular perl module: http://metacpan.org/pod/JSON
Ran the following commands to make and install the desired perl module:
$perl Makefile.PL
Welcome to JSON (v.2.53)
If you install JSON::XS v.2.27, it makes JSON faster.
************************** CAUTION **************************
This is 'JSON version 2' and there are many differences *
to version 1.xx *
Please check your applications useing old version. *
See to 'INCOMPATIBLE CHANGES TO OLD VERSION' and 'TIPS' *
Writing Makefile for JSON
(verified that the Makefile has been written)
$make
make: *** No rule to make target `/System/Library/Perl/5.12/darwin-thread-multi-2level/CORE/config.h', needed by `Makefile'. Stop.
What does that error even mean? What can I do to successfully make install this module?
Here are some additional items that may help you assist me in debugging this issue:
$which make
/Applications/Xcode.app/Contents/Developer/usr/bin/make
$which perl
/usr/bin/perl
$perl -v
This is perl 5, version 12, subversion 3 (v5.12.3) built for darwin-thread-multi-2level
I think you need to download and reinstall XCode. If I recall correctly for 10.7, after downloading Xcode from the app store it drops an installer into your Applications folder. You need to run it and try installing the command line tools again (from Xcode's prefernces pane). I know you mentioned you did this already, but a bit more background might explain why it's worth another try.
Here are the relevant lines in the Makefile from my Mac:
PERL_INC = /System/Library/Perl/5.12/darwin-thread-multi-2level/CORE
# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)$(DFSEP)Config.pm $(PERL_INC)$(DFSEP)config.h
Later on in the Makefile CONFIGDEP is used as a dependency in a target. I believe in your case make is looking for /System/Library/Perl/5.12/darwin-thread-multi-2level/CORE/config.h and can't find it. The error you're seeing is make's obtuse way of saying file not found.
config.h contains specific information about the OS but is not needed for running scripts. It's only referenced when you want to compile a module. With stock OSX you get enough perl to execute scripts. Install XCode and you get the bits (like config.h) to do perl "development". I use quotes because you can write and run perl scripts without Xcode. But as you discovered, compiling a module requires the additional files Xcode provides. (Incidentally, RedHat does the same thing. You have to install the perl-devel package to get config.h. The perl runtime is in a separate package.)
Here are some things you can try:
Verify /System/Library/Perl/5.12/darwin-thread-multi-2level/CORE/config.h exists. If not, Xcode command line utilities were not installed properly. Try it again.
If config.h exists, check its content and make sure it looks sane. It's a C header file and consists of comments and #define statements.
If you don't have access to view config.h, you have a permission issue. Try using sudo make as a bypass. Disk Utility (found in Applications -> Utilities) might be able to permanently fix this.
You could risk changing the Makefile by removing "$(PERL_INC)$(DFSEP)config.h" from CONFIGDEP. I did this on my 10.8 Mac and it worked without issue (it passed all tests as well). However, if you don't find the root cause of your config.h issue, the next time you want to install a perl module you may find yourself right back where you started.
I had this exact same error, whilst this may not be a solution for you.... after reinstalling an updated xcode compatible with the OSX version (+rebooting after the install) I still had the error - to cut a long story short I noticed there was no config.h in /CORE/ after the error.....the solution that worked was to touch config.h and create the file first and then re-run the make. Hope this helps someone.