I'm executing performance testing using JMeter and Blazemeter report, but the response time value is the same as latency time value.
can somebody explain?
I attach the graph results:
Latency Time Graph
Response Time Graph
It just means that the response is small/empty. The values are TTLB and TTFB, See explanantion about the difference
Latency is a difference between time when request was sent and time when response has started to be received.
Response time (= Sample time = Load time = Elapsed time) is a difference between time when request was sent and time when response has been fully received.
So Response time always >= latency.
The larger file is, the larger difference between response time and latency will be.
Related
What is the Difference between Mean response time and Mean turnaround time in a Microservices environment?
ISO Description:
Mean Response Time:
How long is the mean time taken by the system to respond to a user task or system task?
Mean Turnaround Time
What is the mean time taken for completion of a job or asynchronous process?
I am currently measuring the Mean Response Time by Calculating the Average of the Latency Times of the Responses. Is the difference maybe that am just sending 1 (Synchronous) Request while measuring Mean Response Time and maybe using multiple Threads and hitting the Service with multiple Request when measuring Mean Turnaround Time?
Or is the difference that Mean Response time just measures the time the Systems needs to response and the Response itself doesn't matter?
How would the measurements of both Times (in a Microservices Environment) differ? I don't use any Asynchronous Responses.
Would the difference maybe be
MRT = Latency,
MTT = Elapsed time?
Elapsed time. JMeter measures the elapsed time from just before sending the request to just after the last response has been received.
JMeter does not include the time needed to render the response, nor
does JMeter process any client code, for example Javascript.
Latency. JMeter measures the latency from just before sending the request to just after the first response has been received. Thus the
time includes all the processing needed to assemble the request as
well as assembling the first part of the response, which in general
will be longer than one byte. Protocol analysers (such as Wireshark)
measure the time when bytes are actually sent/received over the
interface. The JMeter time should be closer to that which is
experienced by a browser or other application client.
https://jmeter.apache.org/usermanual/glossary.html
As far as I know, the response time is the time it takes the system to generate a response for a received petition. It is measured from the moment the system receives the petition to the moment it sends out the response.
On the other hand, the turnaround time is the time it takes for the petition to be fulfilled. It is measured from the moment the petition is sent to the moment the response is received.
MRT and MTT are just the corresponding means for these times across several petitions.
Using a client - server example:
PS: Petition Sent
PR: Petition Received
RS: Response Sent
RR: Response Received
[client] [ network ] [ server ] [ network ] [client]
PS ---------------- PR ------------ RS ------------------- RR
0 ms 730 ms 940 ms 1620 ms
\ \________________/ /
\ response time /
\______________________________________________________/
turnaround time
The response time is 940 - 730 = 210 milliseconds, the time it took the server to generate a response.
The turnaround time is 1620 milliseconds, the time it took for the client to receive a response.
JMeter's "elapsed time" would be the same as turnaround time here, while "latency" would be the time it takes for the client to start receiving the response. If the response is a 10 MB chunk of data over a 1000 Mbps line, it'd take roughly 80 ms to be completely received, so elapsed time would be latency + 80.
I ran a JMeter test for 193 samples
where I could see my average response time as 5915ms and Throghput as 1.19832.
I just want to know how are they exactly related
All the answers are in JMeter Glossary
Elapsed time. JMeter measures the elapsed time from just before sending the request to just after the last response has been received.
Throughput is calculated as requests/unit of time. The time is calculated from the start of the first sample to the end of the last sample. This includes any intervals between samples, as it is supposed to represent the load on the server.
The formula is: Throughput = (number of requests) / (total time).
The relationship is: higher response time - lower throughput and vice versa.
You can use charts like Transactions per Second for throughput and Response Times Over Time for response times to get them plotted on your test timeline and Composite Graph to put them together. This way you will be able to track the trends.
All 3 charts can be installed using JMeter Plugins Manager
TL;DR
No, but yes.
Both aren't related directly, but when increasing Throughput, it will probably affect server response time due to load/stress on server.
If there are timeout errors response time will probably increase.
But for validation or firewall errors - response time will probably decrease.
There's a long explanation in JMeter archive, last is using Disney to demonstrate:
Think of your last trip to disney or your favorite amusement park. Lets define capacity of the ride to be the number of people that can sit on the ride per turn (think roller coaster). Throughput will be the number of people that exit the ride per unit of time. Lets define service time the the amount of time you get to sit on the ride. Lets define response time or latency to be your time queuing for the ride (dead time) plus service time.
In terms of load/Performance testing. Throughput and Response times are inversely proportional. i.e
With increase in response time throughput should decrease.
With increase in Throughput response time should decrease.
You can get more detailed definitions in this blog:
https://nirajrules.wordpress.com/2009/09/17/measuring-performance-response-vs-latency-vs-throughput-vs-load-vs-scalability-vs-stress-vs-robustness/
Throughout increases to some extent and remains stable when all the resources becomes busy. Now, if user requests increases further at this point response time would increase. But if response time increase is only because of internal queuing then due to the fact that system is taking more requests in at the same time response time is also increasing, throughout doesn't change. When queues are full more requests should fail. If response increase is due to some delay in processing or serving the request, for example running a query on database then due to the fact that system is not accepting more request and at the same time response time is also increasing, consequently throughout would drop.
Just a general explaination.
Respose Time : It is the time calculated when user send the request till request gets finnished.
Throughput : It is server property that number of transaction or request can be made during certain amount of time. here 1.19832 /minute means server cand hadle 1.19832 sample per minute.
As Respose Time increses Throughput increases.
As I understand it, in JMeter:
Latency = Time from when the request is sent until the first response is received.
Response Time = Time from when the request is sent, until the full response is received.
I have a test that I've been running (non GUI mode) multiple times (exact same test every time), once without Google CDN and one with Google CDN.
With the Google CDN, I've seen Latency reduce by approx 50% (from ~900ms to ~450ms).
However, response time has stayed the same.
I would've assumed the response time would reduce/increase by the same amount that latency changes by?
Has anyone experienced this, or have any ideas as to why response time has remained the same?
Thanks :)
How is this possible that in Jmetetr increasing number of users (threads) in my test did not changed the latency (Response time)?
I got the same latency for 100 threads and for 300 threads.
Latency is the difference between the time when a request was sent and time when the response has started to be received.
As per JMeter Glossary
JMeter measures the latency from just before sending the
request to just after the first response has been received. Thus the
time includes all the processing needed to assemble the request as
well as assembling the first part of the response, which in general
will be longer than one byte. Protocol analysers (such as Wireshark)
measure the time when bytes are actually sent/received over the
interface. The JMeter time should be closer to that which is
experienced by a browser or other application client.
Response time (= Sample time = Load time = Elapsed time) is a difference between the time when the request was sent and time when the response has been fully received.
As per JMeter Glossary
JMeter measures the elapsed time from just before sending the request
to just after the last response has been received. JMeter does not
include the time needed to render the response, nor does JMeter
process any client code, for example, Javascript.
So Response time always >= latency.
So it is possible that you may have same Latency for 100 and 300 threads but Response time will be different or increased.
If you have stable network connectivity between JMeter and Application Under Test it is expected that Latency wouldn't change not matter how many threads you kick off. It is "pure" network metric which tells how long did it take for the request to reach to the server.
Check out How to Analyze the Results of a Load Test article to see the impact of Latency for the end user
Is this a valid testing for checking of how much time to load a web under test with 500 concurrent user.
I run jmeter with a 500 thread user , ramp-up period = 50 and loop count forever. with a listener with "results in table" that also record the latency.
While jmeter is running, i try to load/browse the web under test using actual browser(in my case IE8) ,
and it loads in 7 secs. but based on the latency the majority of result is 50k++.
is the 7 secs load time in actual browser is consider a "response time result"? since it is load in actual browser.
another question:
is the latency 50k is converted to sec? means 50secs. to load the web under test if we based on the jmeter result?
kindly clarify this to me please :)
In simple words, Latency is network delay (time taken by network while transferring data)
In JMeter latency is time between, when request is sent to server till first byte of response reaches the client/Jmeter. If response time is very low enough then you wont get precise measure of latency. If Response time is high then probably you will get correct measure.
In Jmeter Latency shares the measure as response time i.e. ms/seconds.
Your 7sec in browser is (Response time (Processing time + Latency) + Rendering time). In Jmeter rendering time is not present (As it is not a browser). Though your rendering is very low as compared to response time but in cases heavy content websites rendering time is comparable. Thus should be considered.
I hope this clears your doubts :)