How to add TLD to search exception in Safari - macos

How can I add .locahost to the list of TLDs that Safari will load — instead of searching — without supplying a protocol? Alternatively (or perhaps additionally), how do I get Safari to stop removing the http:// protocol from the URL?
I've been using project.localhost to handle local development for a while, now that .dev is no longer a viable development TLD. But I'm getting frustrated with Safari's default behavior. What I'd like to do is prevent Safari from submitting the domain name to the search engine.
Desired:
enter project.localhost into address bar
browser loads http://project.localhost
I would be satisfied with Safari not removing the http:// in the address bar, but I can't find a way to do that, either.
What actually happens:
enter project.localhost into address bar
browser sends project.localhost to Duck Duck Go
user is tempted to test the ballistic properties of keyboard
Or, after I've loaded http://project.localhost and then try to add something after the current URL:
click in address bar, URL has been shortened to project.localhost
add /test.html to end
browser sends project.localhost/test.html to Duck Duck Go
user considers software violence

If you just type the trailing '/', then the search will be bypassed.

Turns out that the Safari extension might be a long term solution. At this moment, I can't manage the developer membership cost. But here's the working code, for Future Me and anyone else looking into this.
In the extension's global page <script>:
(function() {
safari.application.addEventListener("beforeSearch", function(event) {
if (event.query.split("/")[0].split(".").pop() == "localhost") {
event.preventDefault();
safari.application.activeBrowserWindow.activeTab.url = "http://" + event.query;
}
}, true);
})();

I just found this question while looking for a solution to the same problem. Good news, there's an easy solution that I just stumbled upon after not finding an answer.
Open System Preferences
Open Network
Click Advanced button
Click Proxies tab
Then in the "Bypass proxy settings for these Hosts & Domains:" add in localhost to the list. Here's what I did with mine. I'm using .home for my local domains in my PiHole. Now if I type "router.home" into Safari my router's config page loads up.

Related

Is it possible to force fail a recaptcha v2 for testing purposes? (I.e. pretend to be a robot)

I'm implementing an invisible reCAPTCHA as per the instructions in the documentation: reCAPTCHA V2 documentation
I've managed to implement it without any problems. But, what I'd like to know is whether I can simulate being a robot for testing purposes?
Is there a way to force the reCAPTCHA to respond as if it thought I was a robot?
Thanks in advance for any assistance.
In the Dev Tools, open Settings, then Devices, add a custom device with any name and user agent equal to Googlebot/2.1.
Finally, in Device Mode, at the left of the top bar, choose the device (the default is Responsive).
You can test the captcha in https://www.google.com/recaptcha/api2/demo?invisible=true
(This is a demo of the Invisible Recaptcha. You can remove the url invisible parameter to test with the captcha button)
You can use a Chrome Plugin like Modify Headers and Add a user-agent like Googlebot/2.1 (+http://www.google.com/bot.html).
For Firefox, if you don't want to install any add-ons, you can easily manually change the user agent :
Enter about:config into the URL box and hit return;
Search for “useragent” (one word), just to check what is already there;
Create a new string (right-click somewhere in the window) titled (i.e. new
preference) “general.useragent.override”, and with string value
"Googlebot/2.1" (or any other you want to test with).
I tried this with Recaptcha v3, and it indeed returns a score of 0.1
And don't forget to remove this line from about:config when done testing !
I found this method here (it is an Apple OS article, but the Firefox method also works for Windows) : http://osxdaily.com/2013/01/16/change-user-agent-chrome-safari-firefox/
I find that if you click on the reCaptcha logo rather than the text box, it tends to fail.
This is because bots detect clickable hitboxes, and since the checkbox is an image, as well as the "I'm not a robot" text, and bots can't process images as text properly, but they CAN process clickable hitboxes, which the reCaptcha tells them to click, it just doesn't tell them where.
Click as far away from the checkbox as possible while keeping your mouse cursor in the reCaptcha. You will then most likely fail it. ( it will just bring up the thing where you have to identify the pictures).
The pictures are on there because like I said, bots can't process images and recognize things like cars.
yes it is possible to force fail a recaptcha v2 for testing purposes.
there are two ways to do that
First way :
you need to have firefox browser for that just make a simple form request
and then wait for response and after getting response click on refresh button firefox will prompt a box saying that " To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier. " then click on "resend"
by doing this browser will send previous " g-recaptcha-response " key and this will fail your recaptcha.
Second way
you can make any simple post request by any application like in linux you can use curl to make post request.
just make sure that you specify all your form filed and also header for request and most important thing POST one field name as " g-recaptcha-response " and give any random value to this field
Just completing the answer of Rafael, follow how to use the plugin
None of proposed answers worked for me. I just wrote a simple Node.js script which opens a browser window with a page. ReCaptcha detects automated browser and shows the challenge. The script is below:
const puppeteer = require('puppeteer');
let testReCaptcha = async () => {
const browser = await puppeteer.launch({ headless: false });
const page = await browser.newPage();
await page.goto('http://yourpage.com');
};
testReCaptcha();
Don't forget to install puppeteer by running npm i puppeteer and change yourpage.com to your page address

Detect url the user is viewing in chrome/firefox/safari

How can you detect the url that I am browsing in chrome/safari/firefox via cocoa (desktop app)?
As a side but related note, are there any security restrictions when developing a desktop app that the user will be alerted and asked if they want to allow? e.g. if the app accesses their contact information etc.
Looking for a cocoa based solution, not javascript.
I would do this as an extension, and because you would like to target Chrome, Safari, and Firefox, I'd use a cross-browser extension framework like Crossrider.
So go to crossrider.com, set up an account and create a new extension. Then open the background.js file and paste in code like this:
appAPI.ready(function($) {
appAPI.message.addListener({channel: "notifyPageUrl"}, function(msg) {
//Do something, like send an xhr post somewhere
// notifying you of the pageUrl that the user visited.
// The url is contained within msg.pageUrl
});
var opts = { listen: true};
// Note: When defining the callback function, the first parameter is an object that
// contains the page URL, and the second parameter contains the data passed
// to the context of the callback function.
appAPI.webRequest.onBeforeNavigate.addListener(function(details, opaqueData) {
// Where:
// * details.pageUrl is the URL of the tab requesting the page
// * opaqueData is the data passed to the context of the callback function
if(opaqueData.listen){
appAPI.message.toBackground({
msg: details.pageUrl
}, {channel: "notifyPageUrl"});
}
}, opts ); // opts is the opaque parameter that is passed to the callback function
});
Then install the extension! In the example above, nothing is being done with the detected pageUrl that the user is visiting, but you can do whatever you like here - you could send a message to the user, you could restrict access utilizing the cancel or redirectTo return parameters, you could log it locally utilizing the crossrider appAPI.db API or you could send the notification elsewhere, cross-domain, to wherever you like utilizing an XHR request from the background directly.
Hope that helps!
And to answer the question on security issues desktop-side, just note that desktop applications will have the permissions of the user under which they run. So if you are thinking of providing a desktop app that your users will run locally, say something that will detect urls they access by tapping into the network stream using something like winpcap on windows or libpcap on *nix varieties, then just be aware of that - and also that libpcap and friends would have to have access to a network card that can be placed in promiscuous mode in the first place, by the user in question.
the pcap / installed desktop app solutions are pretty invasive - most folks don't want you listening in on literally everything and may actually violate some security policies depending on where your users work - their network administrators may not appreciate you "sniffing", whether that is the actual purpose or not. Security guys can get real spooky so-to-speak on these kinds of topics.
The extension via Crossrider is probably the easiest and least intrusive way of accomplishing your goal if I understand the goal correctly.
One last note, you can get the current tab urls for all tabs using Crossrider's tabs API:
// retrieves the array of tabs
appAPI.tabs.getAllTabs(function(allTabInfo) {
// Display the array
for (var i=0; i<allTabInfo.length; i++) {
console.log(
'tabId: ' + allTabInfo[i].tabId +
' tabUrl: ' + allTabInfo[i].tabUrl
);
}
});
For the tab API, refer to:
http://docs.crossrider.com/#!/api/appAPI.tabs
For the background navigation API:
http://docs.crossrider.com/#!/api/appAPI.webRequest.onBeforeNavigate
And for the messaging:
http://docs.crossrider.com/#!/api/appAPI.message
And for the appAPI.db stuff:
http://docs.crossrider.com/#!/api/appAPI.db
Have you looked into the Scripting Bridge? You could have an app that launches, say, an Applescript which verifies if any of the well known browser is opened and ask them which documents (URL) they are viewing.
Note: It doesn't necessarily need to be an applescript; you can access the Scripting Bridge through cocoa.
It would, however, require the browser to support it. I know Safari supports it but ignore if the others do.
Just as a quick note:
There are ways to do it via AppleScript, and you can easily wrap this code into NSAppleScript calls.
Here's gist with AppleScript commands for Safari and Chrome. Firefox seems to not support AE.
Well obviously this is what I had come across on google.
chrome.tabs.
getSelected
(null,
function
(tab) {
alert
(tab.url);
}) ;
in pure javascript we can use
alert(document.URL);
alert(window.location.href)
function to get current url

WatiN driving the IE "Are you sure you want to leave this page?" popup

I'd like to extend my WatiN automated tests to drive a page that guards against the user accidentally leaving the page without saving changes.
The page uses the "beforeunload" technique to seek confirmation from the user:
$(window).bind('beforeunload', function (event) {
if (confirmationRequired) {
return "Sure??";
}
});
My WatIn test is driving the page using IE. I cannot find a way to get WatIn to attach to the popup dialog so I can control it from my test.
All the following have failed (where the hard-coded strings refer to strings that I can see on the popup):
Browser.AttachTo<IE>(Find.ByTitle("Windows Internet Explorer");
browser.HtmlDialog(Find.FindByTitle("Windows Internet Explorer));
browser.HtmlDialog(Find.FindByTitle("Are you sure you want to leave this page?));
browser.HtmlDialog(Find.FindFirst());
Thanks!
You'll need to create and add the dialog handler.
Example Go to example site, click link, click leave page on confirmation dialog:
IE browser = new IE();
browser.GoTo("http://samples.msdn.microsoft.com/workshop/samples/author/dhtml/refs/onbeforeunload.htm");
WatiN.Core.DialogHandlers.ReturnDialogHandlerIe9 myHandler = new WatiN.Core.DialogHandlers.ReturnDialogHandlerIe9();
browser.AddDialogHandler(myHandler);
browser.Link(Find.ByUrl("http://www.microsoft.com")).ClickNoWait();
myHandler.WaitUntilExists();
myHandler.OKButton.Click();
browser.RemoveDialogHandler(myHandler);
The above is working on WatiN2.1, IE9, Win7. If using IE8 or before, you will likely need to use the ReturnDialogHandler object instead of the Ie9 specific handler

Open new popup window without address bars in firefox & IE

hope someone can help. just cannot get a new window to open in Firefox without address bars. IE works fine with below code
window.open('/pageaddress.html', 'winname',
directories=0,titlebar=0,toolbar=0,location=0,status=0,
menubar=0,scrollbars=no,resizable=no,
width=400,height=350);
I need to make for all browser
Firefox 3.0 and higher have disabled setting location by default. resizable and status are also disabled by default. You can verify this by typing `about:config' in your address bar and filtering by "dom". The items of interest are:
dom.disable_window_open_feature.location
dom.disable_window_open_feature.resizable
dom.disable_window_open_feature.status
You can get further information at the Mozilla Developer site. What this basically means, though, is that you won't be able to do what you want to do.
One thing you might want to do (though it won't solve your problem), is put quotes around your window feature parameters, like so:
window.open('/pageaddress.html','winname','directories=no,titlebar=no,toolbar=no,location=no,status=no,menubar=no,scrollbars=no,resizable=no,width=400,height=350');
I agree we can not hide address bar in modern browsers, but we can hide the URL in address bar (e.g show URL about:blank). The following is my work around solution:
var iframe = '<html><head><style>body, html {width: 100%; height: 100%; margin: 0; padding: 0}</style></head><body><iframe src="https://www.w3schools.com" style="height:calc(100% - 4px);width:calc(100% - 4px)"></iframe></body></html>';
var win = window.open("","","width=600,height=480,toolbar=no,menubar=no,resizable=yes");
win.document.write(iframe);
Check the mozilla documentation on window.open.
The window features ("directory=...,...,height=350") etc. arguments should be a string:
window.open('/pageaddress.html','winname',"directories=0,titlebar=0,toolbar=0,location=0,status=0,menubar=0,scrollbars=no,resizable=no,width=400,height=350");
Try if that works in your browsers. Note that some of the features might be overridden by user preferences, such as "location" (see doc.)
Workaround - Open a modal popup window and embed the external URL as an iframe.
In internet explorer, if the new url is from the same domain as the current url, the window will be open without an address bar. Otherwise, it will cause an address bar to appear. One workaround is to open a page from the same domain and then redirect from that page.
check this if it works it works fine for me
<script>
var windowObjectReference;
var strWindowFeatures = "menubar=no,location=no,resizable=no,scrollbars=no,status=yes,width=400,height=350";
function openRequestedPopup() {
windowObjectReference = window.open("http://www.flyingedge.in/", "CNN_WindowName", strWindowFeatures);
}
</script>

Register an application to a URL protocol (all browsers) via installer

I know this is possible via a simple registry change to accomplish this as long as IE/firefox is being used. However, I am wondering if there is a reliable way to do so for other browsers,
I am specifically looking for a way to do this via an installer, so editing a preference inside a specific browser will not cut it.
Here is the best I can come up with:
IE: http://msdn.microsoft.com/en-us/library/aa767914(VS.85).aspx
FireFox: http://kb.mozillazine.org/Register_protocol
Chrome: Since every other browser in seems to support the same convention, I created a bug for chrome.
Opera: I can't find any documentation, but it appears to follow the same method as IE/Firefox (see above links)
Safari: Same thing as opera, it works, but I can't find any documentation on it
Yes. Here is how to do it with FireFox:
http://kb.mozillazine.org/Register_protocol
and Opera:
http://www.opera.com/support/kb/view/535/
If someone looks like a solution for an intranet web site (for all browsers, not only IE), that contains hyperlinks to a shared server folders (like in my case) this is a possible solution:
register protocol (URI scheme) via registry (this can be done for all corporative users i suppose). For example, "myfile:" scheme. (thanks to Greg Dean's answer)
The hyperlink href attribute will then should look like
<a href='myfile:\\mysharedserver\sharedfolder\' target='_self'>Shared server</a>
Write a console application that redirects argument to windows explorer (see step 1 for example of such application)
This is piece of mine test app:
const string prefix = "myfile:";
static string ProcessInput(string s)
{
// TODO Verify and validate the input
// string as appropriate for your application.
if (s.StartsWith(prefix))
s = s.Substring(prefix.Length);
s = System.Net.WebUtility.UrlDecode(s);
Process.Start("explorer", s);
return s;
}
I think this app can be easily installed by your admins for all intranet users :)
I couldn't set up scheme setting to open such links in explorer without this separate app.

Resources