So I have a problem facing VS code changes.
Whatever changes I have applied to my solution and built, it is working fine and I can see those changes being applied when I debug. But the same changes aren't applying to the .exe file.
I have tried release build as well, Same with that. It Debugs the release build fine but doesn't apply those changes to the .exe file.
It Debugs the release build fine but doesn't apply those changes to
.exe file.
When you debug the project, VS debug engine will try to fetch the output project.exe and project.pdb for debugging. So if the debugging works well(those changes being applied), the output project.exe should also work without any issues(changes applied).
See this(for C++, similar situation with C#, VB):
This error message comes when VS debug engine can't find the output .exe, that's why I say if the changes are applied during debugging, it actually indicates the changes have been applied to your .exe file.
Let me name the project which outputs the .exe ProjectA, other projects in your solution are B,C,D. Here are two directions you can check:
If the code changes you mean is in Project A:
Right click project A in Solution Explorer=>Properties, check the value of your Output Directory(C++) or Output path in build tab(C#), it represents where the output .exe will actually exist, and VS debug engine will fetch the .exe in this path.
So make sure you tested the .exe in this path instead of old versions from other locations.
If the code changes you mean is in B,C,D, and A depends on B,C,D:
In most of the time VS will help copy the assemblies from B,C,D into A's bin folder, but I'm not sure if something's wrong with your environment which breaks this. You should make sure all the assemblies in your bin folder are updated.
I think this issue comes from your project instead of IDE(create a new simple project to check if the issue occurs in it). And in which way did you check if the changes are applied? Make sure you use the same way no matter checking during debugging or checking the .exe.
Updated:
According to Sandesh, this issue could be resolved by a clean(clean
old versions completely) rebuild.
Right click your project and click property, in General page, set "Enable Managed Incremental Build" as "Yes". It will replace the old exe file after every builds.
Related
This happens sometimes when I make small changes to the source code, like removing a line of code or changing some value.
case A
change player.y = 100; to player.y = 250;
compile code with CTRL+F5
player still appear at y: 100
change player.symbol = "O"; to player.symbol = "P";
compile code with CTRL+F5
player now appear at the correct location y: 250
So far I've tried
Clean Solution - this works, but I'd rather not have to rely on this whenever I make a change
Build is checked for the project under Build > Configuration Manager...
CTRL-SHIFT-B still compiles the wrong code.
running VS as administrator - still compiles the wrong code.
I've looked at the executable's creation date. It doesn't update when I compile.
deleting the executable before compiling re-creates the same executable without the changes.
I had the same issue on another visual studio installation on the same computer
The project is located on a local hard drive.
edit:
I found this link. The problem seem to be very similar, although when testing right now it extends to more than just editing float numbers. I'm using Visual Studio Community Version 15.7.1, but had this problem prior to patching as well.
This doesn't seem to occur (so far) while building for debug.
It may seem like a pain, but after making any significant changes it is usually a good idea to clean the solution and rebuild the project. You may think that recompiling a single translation unit will work and in some cases that may be true, but if other object files rely on the translation unit you just updated they need to be recompiled as well otherwise visual studio will use the older object files that have previously been built.
As for CTRL+F5 whether you are in debug or release mode just tells Visual Studio that you want to run without debugging as it has nothing to do with the compilation and building of the project or solution. Are you sure you are not confusing CTRL+F5 with CTRL+F7 as user SoronelHateir has mentioned in the commmets? After you make any changes to source code it is good to first recompile that individual file to make sure there are no compilation errors. Then it is good to rebuild that current project within the solution.
On the other hand if your solution has multiple projects for example: one project is a library that is statically linked and the other project is your main executable project and the changes you made are in your library and depending on how the main project depends on the library project you will probably have to more than likely at the least rebuild the library project and in some cases you may even have to rebuild the main startup project. Most of the times just rebuilding the statically linked library should suffice; it is rare that the main program that is linking the library would have to be rebuilt to see the new changes, but there are some rare cases that both will have to be rebuilt.
I'll say it again; yes it may seem like a pain to have to do a clean solution and complete rebuild, but after a while this is the safest path to travel to ensure that all of the object files are up to date. What you are seeing in your own solution is a side effect of running the program with updated code but the output matches that of the older object files. This is a result of the IDE using the older or stale object files that already exist since you did not rebuild the solution. Cleaning the solution clears out all of the old object files as well as any intermediate files that are used to compile the source code into translation units to make the appropriate object files.
There are settings within the IDE that others have mentioned above such as user: Bo Persson has stated from their answer that you can change the behavior of how Visual Studio will recompile, rebuild a project or solution.
In visual studio, after making changes, I always click(in the menu bar):
Build -- Rebuild Solution
Note that this is different from "CTRL+F5" and "CTRL-SHIFT-B"
And it will always pick up all the changes and recompile your program
I tried everything mentioned in the current solutions and it didn't work for me. However after a lot of frustration I realized I was running my debugger. Try going to the Debug tab then press Stop Debugging. Finally make sure to select Release from this dropdown box(Mine was on Debug).
When I use Visual Studio 2010 to debug a crash dump file (native code), it attempts to load C/C++ source files from the original build folder (and it gives the message "The source file is different from when the module was built. Would you like the debugger to use it anyway?"). The message is correct; the file is not the correct version.
What I would like VS2010 to do is to check out the source file using source server. If the file does not currently exist in its original build location, VS2010 will correctly use source server and retrieve the appropriate revision of the file (from Subversion). In order to force it to check out the correct revision, I have to physically delete the file from the original build location.
As a side note, VS2005 works as desired (well ... as I desire, perhaps not as others desire). VS2005 will always check out the correct revision from source control regardless of whether a copy of the file exists in the original build folder.
I believe the question comes down to one of the following:
Is there some kind of setting available that will change VS2010's precedence for finding source files?
Alternatively, is it possible to make VS2010 offer a choice/option to check out the source file in question? (Currently the only option I see in this situation is to browse for it.)
Or is it possible to completely exclude a specific path (folder) from the search?
I have the same problem with VS2010 and made an attempt to figure it out. I monitored devenv.exe with procmon but didn't see anything out of the order with the files & registry keys it was accessing. Pretty much the same information you see in the error report when VS2010 can't find the source. My solution is to use VS2005 as it works fine. I did see some correspondence on MSDN about a similar (if not the same) bug and they claimed it would be fixed in the final release of 2012. I believe I have that final release of 2012 and it has the same problem.
Here's a maybe slightly complicated solution
1) Create a script that will download and replace the pdb file (a .bat, a python script, whatever)
2) Create a new External Tool within VS2010 (Tools -> External Tools -> Add)
3) Point the tool to your script and pass any project-specific stuff to it as arguments
4) Create a post-build or pre-build step in your project that will call your new External Tool (project properties -> Build Events -> whatever)
This is a lot of work, but at least it will fully integrate it into your building process.
Note: Sometimes I've noticed that my post-build steps won't run unless I've compiled at least on cpp file. I usually press F7 and build some source and then build fully, to make sure everything works as expected.
You can change the local source directory to a different name when you are debugging crash dump file.
Or you can change the build directory to a different path with your local directory.
I have a Visual Studio project with about 60 C++ source files. I can do a build, and it completes without errors. But if I immediately hit F7 again, it always re-compiles about 50 of the source files. It doesn't re-compile all of the files, which is strange.
I have 'Enable minimal rebuild' (/Gm) set. Any ideas why it might be doing this?
None of the files have a Modified Date in the future.
Are any of your file dates in the future? This can occur if you changed time zones or changed the system clock time. Dates in the future will confuse the IDE and force a rebuild every time F7 or F5 is hit.
I've solved the same problem.
In my case compiler displayed warning, that /Zi option is required if /Gm is specified.
/Gm enables "minimum rebuild", which requires debug information in .pdb file. So, if you don't want to use .pdb, also disable minumum rebuild - it solved a problem in my case.
Most probably is a matter of dependencies.
Consider the following possibilities:
If you have custom build tools defined for some of the files in your solution, make sure that the output property contains the right file name(s). If the output of the build tool doesn't correspond to the one(s) specified in the output file names, the builder will rebuild that file.
If you have custom build events, check whether the output from those build events don't affect the dependencies of the files to be built.
I had problems when trying, at post-build, to copy or move some of the output files to a build folder. The post build operations that affect the timestamp of the ouput files of the build process will determine rebuild each time.
In my case of such effect (C++ via VS2005) it was on Release configuration only, and the Studio tells in the build output, that compiler option /Gm is ignored if /Zi - option is not set. After setting /Zi via
Configuration Properties -> C/C++ -> General -> Debug Information Format : Program Database (/Zi) ,
it was ok. But isn`t there something wrong, when the Release Configuration needs something about Debugging? Not yet clear to me!
Project Properties -> "C/C++" -> "Output Files" -> "Program Database File Name" option should not be empty. Set this option by selecting from drop-down box . The option will be set like this: $(IntDir)\vc90.pdb. And line ProgramDataBaseFileName="" will be removed from vcproj file.
Then only changed *.cpp files will be recompiled when you build the project or solution.
It seems that this problem can be caused by many things, but what fixed it for me was:
Closing Visual Studio
Manually deleting all bin and obj folders (Clean doesn't seem to do the trick)
Opening the solution and running Clean (I'm not sure if this is necessary, but I did it just in case...)
Building like normal
Note: This was for a C# program in Visual Studio 2010.
After a couple days of googling, I ended up with a solution to my problem.
I encountered this problem when I moved my projects to a new PC. I had checked several times the creation date of the files. These dates were up-to-date, however the modification dates were in the bast (kinda bizarre) even when I changed the files.
A simple update of the files resolved the problem.
I'm having the same problem, and it seems to be because I've turned browse information off. Properties->C/C++->Browse Info->Enable Browse Info->None. The only fix I've found is turning it back on. This is for an xbox 360 project, fwiw, my other projects don't have the problem.
A reason is if the 'date last modified' for one of the source file is set for some date in the future: it rebuilds, and then the source file is still later than the executable.
This problem with the dates can happen if the source file is located in a directory a remote machine (a network share), and/or may even happen if your machine's time isn't synchronised with the date of the machine which is running the server of your source version control system.
Check your project includes any .h header file that doesn't exist on disk. Always happens to me when I delete a header file I'm not actually including anywhere, but forget to delete it from my solution navigator in VS. Note: missing headers produce no errors during the build (when not #included anywhere).
Check your project's Program Database Filename setting. For some reason, if this is set to the name of a directory (such as "$(IntDir)\"), it can sometimes cause VS to rebuild your project every time, even if you're not generating PDB files (i.e. Debug Information Format is set to "Disabled").
This is a bug in VS2008; I have not yet reproduced it yet in VS2010, but my tests haven't been thorough, so I'm not confident saying that the behavior isn't present in VS2010.
What caused similar symptoms at me was:
I have several projects in a solution. There were .cpp files which were referenced (and therefore compiled) by >1 projects. Unfortunately Visual Studio creates .obj files with a very simple naming - it just replaces ".cpp" by ".obj". Creating wrapper .cpp-s with different named solved the problem.
I had something similar. Even though I did have pre and post build events, they weren't causing the issue. It turned out that I had a number of projects down the reference chain that had content files that were marked as "copy always" instead of "copy if newer" meaning that these projects were always considered "out of date". By changing all of these to "copy if newer", changes to my unit test project no longer forced a recompile of all of the other projects.
Disabling "minimal rebuild" (Configuration Properties > C/C++ > Code Generation) fixed it for me. The compiler even left a clue:
1>cl : Command line warning D9007 : '/Gm' requires '/Zi or /ZI'; option ignored
Although I must point out, the compiler did not ignore the option as it said.
In my case I changed system data time to previous date so it is rebuilding every time because of different time stamp of the files once changed to the current time its not rebuilding every time.
We have that here regularly:
delete all intermediate and output files by hand. The clean option in vstudio is sometimes not enough. From a fresh start do the complete build. If after a complete build vstudio still wants to recompile certain files it might be related to next bullet.
if in your vcxproj a header file is referenced which is not on disk, the project is also recompiled. You might check this by some hidden feature described on MSDN blogs or just touch (i.e. click on it to open) all header files in the project exploder and see if one does not exist on disk
Had the same problem. Solved by:
-delete output folder (obj,exe,all files)
-run cygwin
-cd project folder
-run "touch *", which reset file modify date/time
-build and enjoy problem fixed
There is similar issue with project rebuild.
Visual Studio does not recompile but re-links a project every time on F7 hit.
Fix is simple. Try to open in Editor all files included into project (from Solution Explorer double click on each file) and remove from solution those files which do not exist.
I have a C# project which includes one exe and 11 library files. The exe references all the libraries, and lib1 may reference lib2, lib3, lib4, etc.
If I make a change to a class in lib1 and built the solution, I assumed that only lib1 and the exe would need to be changed. However, all dll's and the exe are being built if I want to run the solution.
Is there a way that I can stop the dependencies from being built if they have not been changed?
Is the key this phrase? "However, all dll's and the exe are being built if I want to run the solution"
Visual Studio will always try to build everything when you run a single project, even if that project doesn't depend on everything. This choice can be changed, however. Go to Tools|Options|Projects and Solutions|Build and Run and check the box "Only build startup projects and dependencies on Run". Then when you hit F5, VS will only build your startup project and the DLLs it depends on.
I just "fixed" the same problem with my VS project. Visual Studio did always a rebuild, even if didn't change anything. My Solution: One cs-File had a future timestamp (Year 2015, this was my fault). I opened the file, saved it and my problem was solved!!!
I am not sure if there is a way to avoid dependencies from being built. You can find some info here like setting copylocal to false and putting the dlls in a common directory.
Optimizing Visual Studio solution build - where to put DLL files?
We had a similar problem at work. In post-build events we were manually embedding manifests into the outputs in the bin directory. Visual Studio was copying project references from the obj dir (which weren't modified). The timestamp difference triggered unnecessary rebuilds.
If your post-build events modify project outputs then either modify the outputs in the bin and obj dir OR copy the modified outputs in the bin dir on top of those in the obj dir.
You can uncheck the build option for specified projects in your Solution configuration:
(source: microsoft.com)
You can can create your own solution configurations to build specific project configurations...
(source: microsoft.com)
We actually had this problem on my current project, in our scenario even running unit tests (without any code changes) was causing a recompile. Check your build configuration's "Platform".
If you are using "Any CPU" then for some reason it rebuilds all projects regardless of changes. Try using processor specific builds, i.e. x86 or x64 (use the platform which is specific to the machine architecture of your machine). Worked for us for x86 builds.
(source: episerver.com)
Now, after I say this, some propeller-head is going to come along and contradict me, but there is no way to do what you want to do from Visual Studio. There is a way of doing it outside of VS, but first, I have a question:
Why on earth would you want to do this? Maybe you're trying to save CPU cycles, or save compile time, but if you do what you're suggesting you will suddenly find yourself in a marvelous position to shoot yourself in the foot. If you have a library 1 that depends upon library 2, and only library 2 changes, you may think you're OK to only build the changed library, but one of these days you are going to make a change to library 2 that will break library 1, and without a build of library 2 you will not catch it in the compilation. So in my humble opinion, DON'T DO IT.
The reason this won't work in VS2005 and 2008 is because VS uses MSBuild. MSBuild runs against project files, and it will examine the project's references and build all referenced projects first, if their source has changed, before building the target project. You can test this yourself by running MSBuild from the command line against one project that has not changed but with a referenced project that has changed. Example:
msbuild ClassLibrary4.csproj
where ClassLibrary4 has not changed, but it references ClassLibrary5, which has changed. MSBuild will build lib 5 first, before it builds 4, even though you didn't mention 5.
The only way to get around all these failsafes is to use the compiler directly instead of going through MSBuild. Ugly, ugly, but that's it. You will basically be reduced to re-implementing MSBuild in some form in order to do what you want to do.
It isn't worth it.
Check out the following site for more detailed information on when a project is built as well as the differences between build and rebuild.
I had this problem too, and noticed these warning messages when building on Windows 7 x64, VS2008 SP1:
cl : Command line warning D9038 : /ZI is not supported on this platform; enabling /Zi instead
cl : Command line warning D9007 : '/Gm' requires '/Zi'; option ignored
I changed my project properties to:
C/C++ -> General -> Debug Information Format = /Zi
C/C++ -> Code Generation -> Enable Minimal Build = No
After rebuilding I switched them both back and dependencies work fine again. But prior to that no amount of cleaning, rebuilding, or completely deleting the output directory would fix it.
I don't think there's away for you to do it out of the box in VS. You need this add-in
http://workspacewhiz.com/
It's not free but you can evaluate it before you buy.
Yes, exclude the non-changing bits from the solution. I say this with a caveat, as you can compile in a way where a change in build number for the changed lib can cause the non built pieces to break. This should not be the case, as long as you do not break interface, but it is quite common because most devs do not understand interface in the .NET world. It comes from not having to write IDL. :-)
As for X projcts in a solution, NO, you can't stop them from building, as the system sees a dependency has changed.
BTW, you should look at your project and figure out why your UI project (assume it is UI) references the same library as everything else. A good Dependency Model will show the class(es) that should be broken out as data objects or domain objects (I have made an assumption that the common dependency is some sort of data object or domain object, of course, but that is quite common). If the common dependency is not a domain/data object, then I would rethink my architecture in most cases. In general, you should be able to create a path from UI to data without common dependencies other than non-behavioral objects.
Not sure of an awesome way to handle this, but in the past if I had a project or two that kept getting rebuilt, and assuming I wouldn't be working in them, I would turn the build process off for them.
Right click on the sln, select configuration manager and uncheck the check boxes. Not perfect, but works when Visual Studio isn't behaving.
If you continue to experience this problem, it may be due to a missing or out of date calculated dependency (like a header) that is listed in your project, but does not exist.
This happens to me especially common after migrating to a new version (for example: from 2012 to 2013) because VS may have recalculated dependencies in the conversion, or you are migrating to a new location.
A quick check is to double-click every file in offending project from solution explorer. If you discover a file does not exist, that is your problem.
Failing a simple missing file: You may have a more complicated build date relationship between source and target. You can use a utility to find out what front-end test is triggering the build. To get that information you can enable verbose CPS logging. See: Andrew Arnott - Enable C++ and Javascript project system tracing (http://blogs.msdn.com/b/vsproject/archive/2009/07/21/enable-c-project-system-logging.aspx). I use the DebugView option. Invaluable tool when you need it.
(this is a C# specific question, but a different post was merged as identical)
This may sound like a newbie question - and it is. I'm relatively new to vs, we started using it a few months ago, and I still haven't "mentally" made the change from the command line. So, if you could help me with 2 things:
I create a new project (not a solution). He puts the files in some directory. After putting my code inside it, I click on the little green triangle (Debug, it says), and he compiles it, builds it and runs it. It works ok. Now, sometimes, I have to change only a tiny bit of code and I don't feel like getting the whole VS up just for that. How can I do that Debug thing from the command line, with the assumption I didn't change anything else.
Where do I tell him not to create a "Debug" subdirectory, not to create a HTML Build log, an object file ... and so on, generally, where can I find the settings which will help me to get as little files ... apart from my original source, and the .exe resultant one ?
I have to change only a tiny bit of code and I don't feel like getting the whole VS up just for that. How can I do that Debug thing from the command line, with the assumption I didn't change anything else.
I think what you want here is not debugging but a rebuild of your project.
Where do I tell him not to create a "Debug" subdirectory, not to create a HTML Build log, an object file ... and so on, generally, where can I find the settings which will help me to get as little files ... apart from my original source, and the .exe resultant one ?
The answer to both these questions is to use the command line! You can make VS emit a make file from the loaded project. Use NMAKE to build this make file after you have made your desired modifications. The ".obj" files are created as an intermediate step between compilation and linking phase this is how the C++ compilation model works. Why do insist on not generating them?
You can't really start debugging without starting up Visual Studio, since Visual Studio is the debugger. You can tell VS to rebuild a solution from the command line without firing up the UI if you want to just build it: See MSDN for details.
You can control the creation of the DEBUG and RELEASE directories via the 'intermediate files' option in the project settings. Though you need to create the obj file somewhere in order for the compile to work.