I know there is a similar kind of question exist but if works only for glassfish server.
Listing all deployed rest endpoints (spring-boot, jersey)
Is it possible to list all my configured rest-endpoints with spring boot? The actuator lists all existing paths on startup, I want something similar for my custom services, so I can check on startup if all paths are configured correctly and use this info for client calls.
How do I do this? I use #Path/#GET annotations on my service beans and register them via ResourceConfig#registerClasses.
Is there a way to query the Config for all Paths?
Update2: I want to have something like
GET /rest/mycontroller/info
POST /res/mycontroller/update
...
In my opinion, you are already using the right tool (actuator) to answer to your request.
Actuator gives you all the rest method running and you can configure it on your own, by disabling/enabling specific endpoints
If you have a look on the documentationprobably it can help you.
In any case, the default configuration of actuator display the endpoints (built-in in Intellij for your development).
Related
I have a Spring Boot application with a lot of controllers, and I want to run the service on a sub-path of an existing domain. So I've figured it would be nicer to have this configurable than to hardcode the path into all the request mappings.
I've considered all the approaches mentioned here https://www.baeldung.com/spring-boot-controllers-add-prefix, but they either also change the prefix of the actuator endpoints or are not globally enforced, so I'd prefer a different approach.
I want the actuator endpoints on /_system/ (changed by management.endpoints.web.base-path=/_system) and have only the /prefix as a load balancer target, so the management endpoints won't ever be reachable from the internet (in case I miss-configure the application and start leaking some sensitive info from the management endpoints).
I've also tried configuring management.server.base-path=/, but that seems to also be affected by the server.servlet.context-path and spring.mvc.servlet.path as the actuator seems to be registered "under" the main servlet dispatcher.
I was looking into registering a separate servlet dispatcher just for the actuator endpoints, but I've given up on researching it after some time because I feel like I'd have to override half of Spring Boot.
Any other ideas? Thanks
I'm looking for a way to implement custom endpoints for a reactive application using Spring Boot 2.2.
The endpoints have some subsystems and perform specific resource operations on the subsystems. The URL paths look like:
/actuator/system1/subsystem_a
/actuator/system1/subsystem_b
/actuator/system2/subsystem_c
Furthermore, system1 and system2 are not both always deployed, so I'd like to add dynamically the endpoints of the deployed system only.
I know I can use ReactiveHealthContributorRegistry to add custom health check endpoints dynamically. Is there a similar way for a fully custom endpoint?
Thanks in advance.
It seems there is no way to construct such complex endpoints like what I asked in Spring Boot Actuator.
I finally decided to use RouterFunction and HandlerFunction referring to the following websites.
https://www.baeldung.com/spring-5-functional-web
https://spring.io/blog/2016/09/22/new-in-spring-5-functional-web-framework
I have a simple Zuul app that has a single route in the application.yml to route to my microservice. It's working.
However, what I'm looking for is a more dynamic solution where I can wire up routes dynamically, either through code or perhaps by POSTing to some Zuul endpoints during a build (possibly by using springfox and a swagger definition from microservices). I could not find an API for Zuul.
I'm somewhat aware of Eureka and that seems like a solution to abstract away the routing by doing discovery. However, I'm curious if there's a solution without introducing Eureka. If there's a way to wire up these routes in Zuul during a build vs. having to edit the application.yml every time.
Thanks in advance.
If you go for Eureka this will actually work ootb. Zuul as packaged in spring cloud will automatically expose every service using its name. So if you register a service called users in Eureka, Zuul will automatically create a route /users forwarding to the instances by default. That will only allow simple url structures but should solve your problem.
Please see the official documentation for details:
By convention, a service with the ID "users", will receive requests from the proxy located at /users (with the prefix stripped). The proxy uses Ribbon to locate an instance to forward to via discovery, and all requests are executed in a hystrix command, …
I'm actually editing a blog post about this exact topic (Routing and Filtering using Spring Cloud Zuul Server) but the source code has been available and working for some time now. Feel free to use it as a reference:
https://bitbucket.org/asimio/zuulserver
https://bitbucket.org/asimio/discoveryserver (in case routes are configured with serviceIds)
https://bitbucket.org/asimio/demo-config-properties/src (Zuul-Server-refreshable.yml where routes are dynamically updated).
Look at the refreshable Spring profile settings. This Zuul setup works with both, hard-coding routes url or discovered using Eureka.
It also acting as a Spring Cloud Config client so that routes could be dynamically updated via Git, which is also covered in another blog post: Refreshable Configuration using Spring Cloud Config Server, Spring Cloud Bus, RabbitMQ and Git.
I have spring web application (not spring boot) running in AWS. I am trying to create centralized configuration server. How to refresh the spring-cloud-client after the changing the properties? As per tutorial
Actuator endpoint by sending an empty HTTP POST to the client’s refresh endpoint, http://localhost:8080/refresh, and then confirm it worked by reviewing the http://localhost:8080/message endpoint.
But my aws Ec2 instances are behind the loadbalancer so i can't invoke the client url. I didn't understand the netflix Eureka and Ribbon much but it seems like adding another level of load balancer in the client side. I don't like this approach. Just to change a property i don't want to make the existing project unnecessarily complex. Is there any other way? or Am I misunderstood Eureka/Ribbon usage?
I have looked at the spring-cloud-config-client-without-spring-boot, spring-cloud-config-client-without-auto-configuration none of them have answer. First thread was answered in 2015. Wondering is there any update?
To get the configuration properties from a config server. You can do a http request. Example:
From the documentation we can see:
/{application}/{profile}[/{label}]
/{application}-{profile}.yml <- example
/{label}/{application}-{profile}.yml
/{application}-{profile}.properties
/{label}/{application}-{profile}.properties
So if you would do a request to http://localhost:8080/applicationName-activeProfile.yml you would receive the properties in .yml format for the application with that name and active profile. Spring boot config clients would automatically provide these values but you will have to provide em manually.
You don't need Eureka/Ribbon for this to work, it's a separate component.
More info: http://cloud.spring.io/spring-cloud-static/spring-cloud.html#_spring_cloud_config
Maybe you could even use spring-cloud-config but I'm not sure what extra configuration is needed without spring-boot.
https://cloud.spring.io/spring-cloud-config/
We have developed a software proxy based on spring boot and zuul, that is meant to govern services within our integration layer. We do not own the systems consuming the various services, nor do we own the actual services themselves. The services are SOAP based webservices at present. We make use of pre, post , error and route filters. Validations are database driven, including which client is allowed to call what webservice. All service definitions reside in the database (request endpoint, request xsd, response xsd, which clients are allowed to invoke, etc.).
The aim now is to add hystrix commands to handle service failures, as well as a hystrix dashboard.
The standard way to use hystrix commands involves annotating service methods with javanica. Is there a way to dynamically declare/register hystrix commands for these webservices at runtime after reading the configurations from the database? The hystrix interception will need to happen based on the multiple webservice endpoints being invoked from a single point.
Hoping this is achievable ...if not, I would really appreciate any alternative proposals for how hystrix commands could be declared in this way.
Thanks!
You're saying that you are already using Spring Boot and Zuul. How are you mapping the routes? Through the url param? Then you'll have to enroll your own. But if you define the routes as ribbon services and pass the routes as ribbon servers as described in the documentation you will get Hystrix for free.