I'm going to create an alias that does this:
I've added it to my git-bash .bash_profile but I'd like to see if there is a way to add it as an alias so I don't have to use git bash
Git finish will push to current branch # Eg. gf "commit message"
gf() {
CURRENT_BRANCH="$(git rev-parse --abbrev-ref HEAD)"
git add . && git commit -m "$1" && git push origin "$CURRENT_BRANCH"
} # Git merge # Eg. gm branch-name
gm() {
git merge "$1"
} # Git checkout # Eg. gc branch-name
gc(){
git checkout "$1" && gp
}
You could create a "Git-Subcommand" the name of this executable must be in this Format: git-{{ Name }} eg: git-acommit. This File must be located in one the Directories listed in $PATH, you can now execute git acommit and git will search for it in you $PATH.
To use this than in an alias simply run git config --global alias.gf acommit and you are finished. Please note: the alias step is unnecessary since you can name your file how you want, so you could also name it git-gf instead of git-acommit.
But without creating a separated file it's impossible to stack commands in a git alias.
Or you could use GitAlias to create an alias that executes a function or multiple Commands.
For an example check out the Recovery examples Section.
Related
I need to a alias remove local branch and regenerate with same name again. for example;
grb test-branch
git regenerate branch
will make this automatically
git branch -D test-branch && git checkout -b test-branch
how can I do this ?
is there any default shortcuts comes with vanilla git ?
You can add the following function to your .bashrc or .zshrc file;
# git branch regenerate
function gbrr () {
git branch -D "$#" && git checkout -b "$#"
}
And you can use it like below
gbrr feature/navbar
I need to run a script which notifies my CI server after I push. Therefore I need to alias "git push" into "git push; powershell script.ps1". Here is what I am trying:
$ alias git push='git push; powershell script.ps1'
bash: alias: git: not found
Alternatively, denoting whitespace characters returns this:
$ alias git\ push='git push; powershell script.ps1'
bash: alias: `git push': invalid alias name
$ alias "git push"='git push; powershell script.ps1'
bash: alias: `git push': invalid alias name
How can I alias my script to run every time I push?
This worked:
git config --global alias.push "push; powershell ./script.ps1"
The command runs, but using "git push" still doesn't run my script.
Yes, I know that I can use webhooks for this, but it is imperative that the CI server remains fully local. Yes, I know that I can use NGROK for that, but my company does not allow it.
Git doesn't allow alias names to override proper command names. Use another label for your alias.
And if the alias content mixes a git command and shell commands, you'll have to prepend a ! to tell git to pass the command for the shell to interpret.
Try
git config --global alias.p '!git push; powershell ./script.ps1'
# then to invoke it, just
git p
Another slight improvement would be to use && instead of ; to chain your commands, in case the push fails. It would then stop from executing the unnecessary following.
git config --global alias.p '!git push && powershell ./script.ps1'
I'm a fairly new user in Bash and Git in general and I'm scratching my head about what the problem could be. I'm creating a code that checks if .gitconfig exists and if it doesn't it allows you to configure it almost automatically using a read command to get your email and username and apply them in a line of code.
Code example:
#!/bin/bash
# colors
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
NO_COLOR='\033[0m'
# function git
git () {
printf "${RED}Set your Git email\n${NO_COLOR}"
read GIT_AUTHOR_EMAIL
git config --global user.email "$GIT_AUTHOR_EMAIL"
printf "${RED}Set your Git username\n${NO_COLOR}"
read GIT_AUTHOR_USERNAME
git config --global user.name "$GIT_AUTHOR_USERNAME"
git config --list | grep user.email && git config --list | grep user.name
}
# git check & configuration
if [ -f ".gitconfig" ]; then
printf "${YELLOW}Git was previously configured\n${NO_COLOR}"
exit
else
git
printf "${YELLOW}Done\n${NO_COLOR}"
exit
fi
If it doesn't exist, it calls a function to configure it but after some quick debugging using the set -x command I figured out the file .gitconfig is not created at all but it does when I do it myself outside a function. All it does is go back to read GIT_AUTHOR_EMAIL, apply the code git config --global user.email "$GIT_AUTHOR_EMAIL" and go back to the first read command. I want the code to check for .gitconfig and if it exists it'll also ask if the user wants to re-configure their Git details. I'm super close on doing so.
Is there any way I can fix it or do it another way?
Once you've defined the function git, any invocation of the name git in that shell process will refer to that shell function. If you'd like to invoke the program git, then you need to prefix it with the built-in command:
command git config --global user.name "$GIT_AUTHOR_USERNAME"
If it wasn't your intention to override the git command, then you probably want to name your shell function differently, which avoids the problem altogether.
I have following list of commands that I run in respective order so that a source project can be committed and pushed to the repository on Bitbucket:
git init
git remote add origin https://[BitBucket Username]#bitbucket.org/[BitBucket Username]/[BitBucket Repository Name].git
git config user.name "[BitBucket Username]"
git config user.email "[BitBucket Email ID]"
## if email doesn't work then use below ##
git config --global user.email \<\>
git add *
git commit -m "[Comment]"
git push -u origin master
Now instead of putting each and every line at their respective time and order, I want to know, if there is a possibility that I can chain all these into single git command and maintain the same order, something like below ?
git init remote add origin https://[BitBucket Username]#bitbucket.org/[BitBucket Username]/[BitBucket Repository Name].git config user.name "[Username]" ....
Or atleast combine multiple same category params like below ?
git config user.name "[BitBucket Username]" user.email "[BitBucket Email ID]"
I need to know possibility of both scenarios with examples.
We can use list off command in single command for example:
git add . && git commit -m "updated pom file" && git push
or:
git stash pop && git add . && git commit -m "updated pom file" && git push
&& -> if 1st command successfully executes then execute next command else it won't execute next command.
& - it executes all the command
|| - execute next command if 1st one failed
If you are in a Windows Powershell:
git add . ; git commit -m "Testing one line command" ; git push
I have gitbash on Windows system and I am not as good with Win batch as with Linux shell.
You still can write a bash script (interpreted by the msys2 bash embedded with Git for Windows).
As mentioned in the comments by Lasse V. Karlsen, and as I mentioned before in "Which shell used for git '!' aliases?", you can write a shell script in a file (in your %PATH%) named git-xxx, and call it with git xxx.
That script would begin with:
#!/bin/bash
I created a file called reset.txt and in that file I have the commands
git reset --hard
git clean -d -f
[this is a newline - very important to have it]
I just copy and paste this into my terminal and it executes the commands in order.
I would like to add new command on my Git Bash (just now i am under Windows OS). I tryed to look on Web different solutions but I did not find anything. The command that i like to add is:
commitall -> git add --all && git commit -m "$*"
There is a way to add this command on Windows Git Bash?
Thanks
Use Git aliases, like so:
git config --global alias.commitall '!git add --all && git commit -m'
There's no need to use $* because all the arguments you specify will simply be appended to the line above, i.e. if you run:
git comitall "a message"
…the following will be executed:
git add --all && git commit -m "a message"