I've been trying to install matplotlib and textblob on my system using
pip3 install matplotlib
or
pip3 install textblob
It says it's installed successfully. However, when I try to import in in Sublime Text it says
ModuleNotFoundError: No module named 'matplotlib'
or
ModuleNotFoundError: No module named 'textblob'
I've set up the build system in sublime text for python 3. A lot of modules that I've installed and are using the same way works fine (BeautifulSoup, requests and tweepy for example). I do not understand why some modules work and others do not. I've been trying to find the solution to this problem but after hours of research without results, I see this question as my last resort. Very thankful for all help.
shell_cmd: /usr/bin/env python3
Related
I'm trying to get pyttsx3 to work in pycharm. I did a "pip3 install pyttsx3". "pip3 list" shows it to be available. I get the following when I try to run the module in pycharm:
from pywiktionary import WiktionaryParserFactory
ModuleNotFoundError: No module named 'pywiktionary'
It does the same thing for pyttsx3. Installs under pip, but get the same "ModuleNotFoundError: No module named 'pyttsx3'.
It's like they exist at one place for pip and another place for pycharm. I even uninstalled/installed pycharm. What defines where the python modules are put in the system?
On import modin.pandas as modin_pd line I get ModuleNotFoundError: No module named 'modin'. I am using poetry & JupyterLab. If in the cell I type !poetry add modin, I get ValueError saying Package modin is already present.
So it cannot install modin because it is already installed but it cannot import it either. Any obvious solution that I am missing?
pip freeze command also shows modin to be installed. I also tried to install it via pip install but absolutely nothing let me to import this module in the end.
The problem may be this one KeyError: CPU
It can be solved by using pip install psutil
Working on Automate The Boring Stuff project and having trouble with pyperclip and IDLE. pyperclip is successfully downloaded and works fine in Terminal but when I import pyperclip in IDLE, I get the below error.
UPDATE - This is happening with other modules - anything I've installed in the terminal aren't importing into IDLE.
import pyperclip
Traceback (most recent call last):
File "", line 1, in
import pyperclip
ModuleNotFoundError: No module named 'pyperclip'
I figure I have the module saved in the wrong folder somehow. Below are the sys.path outputs from my Terminal and IDLE.
In terminal:
'/anaconda/bin',
'//anaconda/lib/python36.zip',
'//anaconda/lib/python3.6',
'//anaconda/lib/python3.6/lib-dynload',
'//anaconda/lib/python3.6/site-packages',
'//anaconda/lib/python3.6/site-packages/Sphinx-1.5.1-py3.6.egg',
'//anaconda/lib/python3.6/site-packages/aeosa',
'//anaconda/lib/python3.6/site-packages/IPython/extensions',
'/Users/andrewricardo/.ipython']
In IDLE:
sys.path
['', '/Users/andrewricardo/Documents', '/Library/Frameworks/Python.framework/Versions/3.6/lib/python36.zip', '/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6', '/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/lib-dynload', '/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/site-packages']
There are multiple paths here - how do I effectively move the pyperclip module to the correct place?
OR - Is there something else going on here?
Each python installation and uses its own .../lib/site-packages for 3rd party modules, and you have two. If you ran the non-anaconda python in the terminal, the same that is running IDLE, it would have the same problem. Indeed, that python is the source of the ImportErrors.
Option 1: Separately install all packages you want to use with the non-anaconda python (and IDLE) in its own site-package directory. In IDLE Shell, get the path to its executable
>>> import sys; sys.executable
Save are remember the resulting 'python-path'. Then in the terminal, run
python-path -m pip install package-name
for each package.
Option 2 (uses a little known feature of site-package directories): in
/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/site-packages
add a file name, for instance, anaconda.pth, containing one line.
//anaconda/lib/python3.6/site-packages
(I have no idea why the double / or if it is really needed; I just copied it from your question.) This makes the anaconda python site-packages an extension of the framework python site-packages. Since both are for 3.6, one copy should work for both.
Had this same issue and googled
'why is importing pyperclip in my python file giving an "modulenotfounderror"but working fine in the idle'
and this page came up. then i also checked this [installed Pyperclip, trouble importing to IDLE.
I am new to python, had the same issue using the same book after pip installing pyperclip here's what I did to solve this issue.
I copied the pyperclip-1.7.0-py3.7.egg-info and pyperclip folders from
C:\Users\USER\AppData\Local\Programs\Python\Python37\Lib\site-packages into the C:\Users\USER\Anaconda3\Lib\site-packages folders and C:\Users\USER\AppData\Local\Programs\Python\Python37 folders and it worked. Hope this helps. If it doesn't. Try this code in your text editor because that's what I did using Atom and how i was able to solve it.
import sys
print(sys.executable)
Then copy the pyperclip-1.7.0-py3.7.egg-info and pyperclip folders into the path that the above code gives you.
I have installed NLTK. Here's an image of the installation log.
When i use import nltk i get an error:
"No module named NLTK.corpus"
Here is a screenshot.
What could be the cause?
I think I had the same problem. So, downloading all the packages at once (since question didn't specify).
Start python and then import the packages, exit python and upgrade nltk. Modify the 'all' to download a specific corpus. Took me awhile to complete the 'all' download, I separately downloaded framenet_v15 and restarted the 'all' after. Upgrade nltk when the download is complete.
$ python
>>>import nltk
>>>nltk.download('all')
exit python
$ pip install --upgrade nltk
To fix this, you should rename your file to something else, say nltkXXX.py. Also make sure to remove "nltk.pyc" from your directory if it exists, since this will also be loaded (it's the byte compiled version of your code). After that, it should work fine.
If you are using the latest version of python, then try installing nltk using pip and the wheel downloaded from here:
http://www.lfd.uci.edu/~gohlke/pythonlibs/
Then in command prompt, use the command:
pip3 install
This should install nltk correctly.
After that check the installation in python using the command:
import nltk
and download the nltk data required using:
nltk.download()
If you find (Import NLTK : no module NLTK corpus) that type of error .
Make sure your saved file not be the name like (nltk.py).
so just rename your file name (like rename nltk.py to example.py ) or something else:
I hope it will help you.
thanks
If you has using PyCharm IDE, you should have install NLTK from the IDE's own tools [File -> Settings -> Projetct Interpreter -> Install (button '+') -> Install Package].
I am using Python 2.7 through Anaconda 2.7.8 and need Kapteyn 2.2 to perform Non-linear Least Squares fitting easily (it is probably an alternative to Scipy.optimize.leastsq() for dummies like me!).
After copy-pasting this from a previous post here on Stack Overflow:
conda install -c https://conda.binstar.org/dhirschfeld pyodbc
and then running on my cmd (as I did not have pyodbc installed I think, because of which maybe the command prompt on my Windows 7 64-bit system was not responding well to python setup.py install inside the Anaconda directory where I unzipped the Kapteyn .zip file downloaded from University of Groningen website.
But, after the installing pyodbc properly and running python setup.py install, the cmd gave me an error saying error: command 'C:\Users\windows 7\Anaconda\Scripts\gcc.bat' failed with exit status 1. Later, when I tried to import kmpfit module (needed for Non-linear least square fitting with Kapteyn), here is the problem:
import kapteyn
help(kapteyn)
Help on package kapteyn:
NAME
kapteyn - Kapteyn package.
FILE
c:\users\windows 7\anaconda\kapteyn\__init__.py
PACKAGE CONTENTS
_ni_support
celestial
doccer
filters
interpolation
maputils
mplutil
positions
rulers
shapes
tabarray
wcsgrat
DATA
__all__ = ['celestial', 'wcs', 'wcsgrat', 'tabarray', 'maputils', 'mpl...
__version__ = '2.2'
VERSION
2.2
As you can see, there is no module named kmpfit (or even wcs) here. But according to http://www.astro.rug.nl/software/kapteyn/intro.html, these two should be there.
Kindly help. I have never imported any module before.
Thanks in advance...:-)
I just managed to get this working (on Mac OSX, so you may have to adjust this). My steps were:
$ conda install pyodbc (didn't need to go through binstar)
Download & unarchive the kapteyn package, then navigate to its directory
$ python setup.py install, which used my OS's C compiler and Anaconda's python, and installed kapteyn to my anaconda distro's site-packages, as it should.
Check that kmpfit.so is in the kapteyn folder in site-packages, showing that kmpfit installed correctly.
>> from kapteyn import kmpfit failed, ImportError: cannot import name kmpfit. I did some digging and discovered that it was still importing kapteyn from the folder that I downloaded, not from site-packages.
Delete the downloaded kapteyn folder, then try again. It worked!