I want to run linux 3.10 with mips64r2 on qemu. But it fails, the boot log as follows,
I compile the kernel with the gcc 4.9.3 which is modified by loongson.
The kernel config file is the malta_defconfig and i change it to mips64r2 cpu and 64 bit kernel.
The qemu 2.5 is the default application on the ubuntu 16.04.
zlp#lab302i-ES:~/projs/linux-3.10$ qemu-system-mips64el -M malta -m 1G -cpu 5KEf -kernel vmlinux -nographic
Linux version 3.10.0 (zlp#lab302i-ES) (gcc version 4.9.3 20150626 (Red Hat 4.9.3-2) (GCC) ) #8 SMP Tue Nov 19 19:16:32 CST 2019
Config serial console: console=ttyS0,38400n8r
bootconsole [early0] enabled
CPU revision is: 00018900 (MIPS 5KE)
FPU revision is: 00738900
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Software DMA cache coherency enabled
Determined physical RAM map:
memory: 0000000000001000 # 0000000000000000 (reserved)
memory: 00000000000ef000 # 0000000000001000 (ROM data)
memory: 0000000000539000 # 00000000000f0000 (reserved)
memory: 000000000f9d7000 # 0000000000629000 (usable)
Wasting 88312 bytes for tracking 1577 unused pages
Zone ranges:
DMA [mem 0x00000000-0x00ffffff]
Normal [mem 0x01000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
Primary instruction cache 8kB, VIPT, 2-way, linesize 32 bytes.
Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 32 bytes
PERCPU: Embedded 10 pages/cpu #9800000001384000 s10816 r8192 d21952 u40960
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64640
Kernel command line: console=ttyS0,38400n8r
PID hash table entries: 1024 (order: 1, 8192 bytes)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Cache parity protection disabled
Memory: 251796k/255836k available (3695k kernel code, 4040k reserved, 1150k data, 272k init, 0k highmem)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
NR_IRQS:256
CPU frequency 200.00 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 1076.42 BogoMIPS (lpj=5382144)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Checking for the daddi bug... no.
Brought up 1 CPUs
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
vgaarb: loaded
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
pci_bus 0000:00: root bus resource [io 0x2000-0x1fffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:0a.3: no compatible bridge window for [io 0x1100-0x110f]
vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=none,locks=none
pci 0000:00:0a.3: BAR 8: [io 0x1100-0x110f] has bogus alignment
pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x11ffffff pref]
pci 0000:00:0b.0: BAR 6: assigned [mem 0x12000000-0x1203ffff pref]
pci 0000:00:12.0: BAR 6: assigned [mem 0x12040000-0x1204ffff pref]
pci 0000:00:12.0: BAR 1: assigned [mem 0x12050000-0x12050fff]
pci 0000:00:0a.2: BAR 4: assigned [io 0x2000-0x201f]
pci 0000:00:0b.0: BAR 0: assigned [io 0x2020-0x203f]
pci 0000:00:0b.0: BAR 1: assigned [mem 0x12051000-0x1205101f]
pci 0000:00:0a.1: BAR 4: assigned [io 0x2040-0x204f]
Switching to clocksource pit
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 3, 32768 bytes)
TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: Enabling device 0000:00:0a.2 (0000 -> 0001)
CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff8016bef4, ra == ffffffff805c51a0
Oops[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0 #8
task: 980000000fc433f0 ti: 980000000fc44000 task.ti: 980000000fc44000
$ 0 : 0000000000000000 0000000000000008 0000000000000000 0000000000000000
$ 4 : 980000000fc47de0 0000000000000000 0000000000000000 0000000000000000
$ 8 : 0000000000000000 980000000fd84e60 fffffffffffffffc ffffffff8061cd30
$12 : 0000000000000010 ffffffff802e3bd4 0000000000000000 000000000000001a
$16 : ffffffff80600000 ffffffff805c5184 0000000000000000 ffffffff80600000
$20 : ffffffff805e6368 ffffffff805e6338 ffffffff805bc1d8 ffffffff805e62f8
$24 : 0000000000000018 ffffffff803451b0
$28 : 980000000fc44000 980000000fc47de0 ffffffff80600000 ffffffff805c51a0
Hi : 0000000000000001
Lo : 1111111111111112
epc : ffffffff8016bef4 cmpxchg_futex_value_locked+0x2c/0x78
Not tainted
ra : ffffffff805c51a0 futex_init+0x1c/0x6c
Status: 1400a7e3 KX SX UX KERNEL EXL IE
Cause : 00800008
BadVA : 0000000000000000
PrId : 00018900 (MIPS 5KE)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=980000000fc44000, task=980000000fc433f0, tls=0000000000000000)
Stack : ffffffff805c4f3c 0000000000000000 ffffffff80600000 ffffffff801004f0
ffffffff805e6368 0000000000000006 0000000000000030 ffffffff805f0a30
ffffffff80600000 ffffffff805bca24 0000000000000066 0000000000000000
ffffffff80494a48 0000000000000000 ffffffff80600000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 ffffffff80494a64 ffffffff80494a48 0000000000000000
0000000000000000 ffffffff80101f18 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
...
Call Trace:
[<ffffffff8016bef4>] cmpxchg_futex_value_locked+0x2c/0x78
[<ffffffff805c51a0>] futex_init+0x1c/0x6c
[<ffffffff801004f0>] do_one_initcall+0xe0/0x160
[<ffffffff805bca24>] kernel_init_freeable+0x16c/0x220
[<ffffffff80494a64>] kernel_init+0x1c/0x160
[<ffffffff80101f18>] ret_from_kernel_thread+0x14/0x1c
Code: 00000000 0000102d 0000000f <c0a30000> 14660005 00000000 00e0082d e0a10000 1020fff9
---[ end trace 47a33b7db369802c ]---
note: swapper/0[1] exited with preempt_count 1
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Several possible issues here:
(1) QEMU 2.5 is now pretty old. You could retry with something more modern.
(2) You're building the kernel with "a gcc modified by loongson", but you're not actually running this on a Loongson CPU. Try using a stock gcc to build your kernel, and make sure that your kernel config matches the board model and CPU model you're asking QEMU to emulate. (The kernel log you give shows it crashing in a low level function which is going to try to do an atomic cmpxchg operation, and I have a vague recollection that this is an area where different MIPS CPUs have different sets of supported instructions, and in particular that Loongson might have made some changes here. So my first guess would be that your problem is here.)
Related
In embedded platform built by petalinux, during boot(from u-boot), the last print I see is(sometimes) mmcblk0boot1 print.
What are the good ways to debug/trace/fix the problem?
As you can see at the end of the log is the start of another boot
The attached log
=======================================================================
> U-Boot 2015.07 (Jul 22 2018 - 14:04:29 +0300)
> DRAM: ECC disabled 511 MiB
> MMC: Max clock 26000000, Min clock 0
> zynq_sdhci: 0
> SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
> *** Warning - bad CRC, using default environment
> In: serial
> Out: serial
> Err: serial
> Net: Gem.e000b000
> U-BOOT for AAS_TOP_V0_00_12
> Hit any key to stop autoboot: 4 3 2 1 0
> Device: zynq_sdhci
> Manufacturer ID: fe
> OEM: 14e
> Name: MMC04
> Tran Speed: 26000000
> Rd Block Len: 512
> MMC version 4.4.1
> High Capacity: Yes
> Capacity: 3.5 GiB
> Bus Width: 4-bit
> Erase Group Size: 512 KiB
> HC WP Group Size: 4 MiB
> User Capacity: 3.5 GiB
> Boot Capacity: 16 MiB ENH
> RPMB Capacity: 128 KiB ENH
> reading image.ub
> 7775932 bytes read in 750 ms (9.9 MiB/s)
> ## Loading kernel from FIT Image at 01000000 ...
> Using 'conf#1' configuration
> Verifying Hash Integrity ... OK
> Trying 'kernel#1' kernel subimage
> Description: PetaLinux Kernel
> Type: Kernel Image
> Compression: gzip compressed
> Data Start: 0x010000f0
> Data Size: 7760664 Bytes = 7.4 MiB
> Architecture: ARM
> OS: Linux
> Load Address: 0x00008000
> Entry Point: 0x00008000
> Hash algo: crc32
> Hash value: 53e3bbd8
> Verifying Hash Integrity ... crc32+ OK
> ## Loading fdt from FIT Image at 01000000 ...
> Using 'conf#1' configuration
> Trying 'fdt#1' fdt subimage
> Description: Flattened Device Tree blob
> Type: Flat Device Tree
> Compression: uncompressed
> Data Start: 0x01766cec
> Data Size: 13972 Bytes = 13.6 KiB
> Architecture: ARM
> Hash algo: crc32
> Hash value: bdcc1805
> Verifying Hash Integrity ... crc32+ OK
> Booting using the fdt blob at 0x1766cec
> Uncompressing Kernel Image ... OK
> Loading Device Tree to 07ff9000, end 07fff693 ... OK
Starting kernel:
> Starting kernel ...
> Booting Linux on physical CPU 0x0
> Linux version 4.0.0-xilinx (alex#ubuntu) (gcc version 4.9.2
> (SourceryCodeBench Lite 2015.05-17) ) #3 SMP PREEMPT Sun Nov 12 10:10:19
> CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine model: MY_MACHINE
> bootconsole [earlycon0] enabled
> cma: Reserved 16 MiB at 0x1ec00000
> Memory policy: Data cache writealloc
> PERCPU: Embedded 11 pages/cpu #dfecf000 s12672 r8192 d24192 u45056
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129794
> Kernel command line: console=ttyPS0,115200 earlyprintk
> PID hash table entries: 2048 (order: 1, 8192 bytes)
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 490876K/523264K available (4763K kernel code, 223K rwdata, 1708K
> rodata, 4376K init, 208K bss, 16004K reserved, 16384K cma-reserved, 0K
>highmem)
> Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> vmalloc : 0xe0000000 - 0xff000000 ( 496 MB)
> lowmem : 0xc0000000 - 0xdff00000 ( 511 MB)
> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> .text : 0xc0008000 - 0xc0659f7c (6472 kB)
> .init : 0xc065a000 - 0xc0aa0000 (4376 kB)
> .data : 0xc0aa0000 - 0xc0ad7e60 ( 224 kB)
> .bss : 0xc0ad7e60 - 0xc0b0c174 ( 209 kB)
> Preemptible hierarchical RCU implementation.
> Additional per-CPU info printed with stalls.
> RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
> RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
> NR_IRQS:16 nr_irqs:16 16
> L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
> L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
> L2C-310 erratum 769419 enabled
> L2C-310 enabling early BRESP for Cortex-A9
> L2C-310 full line of zeros enabled for Cortex-A9
> L2C-310 ID prefetch enabled, offset 1 lines
> L2C-310 dynamic clock gating enabled, standby mode enabled
> L2C-310 cache controller enabled, 8 ways, 512 kB
> L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
> slcr mapped to e0004000
> zynq_clock_init: clkc starts at e0004100
> Zynq clock init
> sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
> timer #0 at e0008000, irq=17
> Console: colour dummy device 80x30
> Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
> Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
> CPU: Testing write buffer coherency: ok
> CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> Setting up static identity map for 0x482348 - 0x4823a0
> CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> Brought up 2 CPUs
> SMP: Total of 2 processors activated (2664.03 BogoMIPS).
> CPU: All CPU(s) started in SVC mode.
> devtmpfs: initialized
> VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
> pinctrl core: initialized pinctrl subsystem
> NET: Registered protocol family 16
> DMA: preallocated 256 KiB pool for atomic coherent allocations
> cpuidle: using governor ladder
> cpuidle: using governor menu
> hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
> hw-breakpoint: maximum watchpoint size is 4 bytes.
> zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB # 0xe0080000
> vgaarb: loaded
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> media: Linux media interface: v0.10
> Linux video capture interface: v2.00
> pps_core: LinuxPPS API ver. 1 registered
> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
> <giometti#linux.it>
> PTP clock support registered
> EDAC MC: Ver: 3.0.0
> Advanced Linux Sound Architecture Driver Initialized.
> Switched to clocksource arm_global_timer
> NET: Registered protocol family 2
> TCP established hash table entries: 4096 (order: 2, 16384 bytes)
> TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> TCP: Hash tables configured (established 4096 bind 4096)
> TCP: reno registered
> UDP hash table entries: 256 (order: 1, 8192 bytes)
> UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters
> available
> futex hash table entries: 512 (order: 3, 32768 bytes)
> jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
> dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
> dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4
> Num_Events-16
> e0000000.serial: ttyPS1 at MMIO 0xe0000000 (irq = 144, base_baud = 3125000)
> is a xuartps
> e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 145, base_baud = 3125000)
> is a xuartps
> �console [ttyPS0] enabled
> console [ttyPS0] enabled
> bootconsole [earlycon0] disabled
> bootconsole [earlycon0] disabled
> xdevcfg f8007000.devcfg: ioremap 0xf8007000 to e006c000
> [drm] Initialized drm 1.1.0 20060810
> brd: module loaded
> loop: module loaded
> CAN device driver interface
> libphy: MACB_mii_bus: probed
> macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq
> 149 (00:0a:35:00:1e:53)
> macb e000b000.ethernet eth0: attached PHY driver [Marvell 88E1510]
> (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
> e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci-pci: EHCI PCI platform driver
> usbcore: registered new interface driver usb-storage
> mousedev: PS/2 mouse device common for all mice
> i2c /dev entries driver
> at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
> cdns-i2c e0004000.i2c: 400 kHz mmio e0004000 irq 141
> Xilinx Zynq CpuIdle Driver started
> Driver 'mmcblk' needs updating - please use bus_type methods
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> sdhci-pltfm: SDHCI platform and OF driver helper
> sdhci-arasan e0101000.sdhci: No vmmc regulator found
> sdhci-arasan e0101000.sdhci: No vqmmc regulator found
> mmc0: SDHCI controller on e0101000.sdhci [e0101000.sdhci] using ADMA
> ledtrig-cpu: registered to indicate activity on CPUs
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> TCP: cubic registered
> NET: Registered protocol family 17
> can: controller area network core (rev 20120528 abi 9)
> NET: Registered protocol family 29
> can: raw protocol (rev 20120528)
> can: broadcast manager protocol (rev 20120528 t)
> can: netlink gateway (rev 20130117) max_hops=1
> Registering SWP/SWPB emulation handler
> /home/alex/Petalinux/petalinux-v2015.4-final/components/linux-kernel/xlnx-
> 4.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> ALSA device list:
> No soundcards found.
> Freeing unused kernel memory: 4376K (c065a000 - c0aa0000)
> mmc0: MAN_BKOPS_EN bit is not set
> mmc0: new high speed MMC card at address 0001
>
> INIT: mmcblk0: mmc0:0001 MMC04G 3.52 GiB
> mmcblk0boot0: mmc0:0001 MMC04G partition 1 16.0 MiB
> mmcblk0boot1: mmc0:0001 MMC04G partition 2 16.0 MiB
> U-Boot 2015.07 (Jul 22 2018 - 14:04:29 +0300)
I am trying to cross compile the Linux for a dual-core ARM Cortex A9 device. While booting I got the following prints on the UART which is showing some sync issue when Core-1 is starting. I remember I have enabled multi programming while compiling the kernel. What part of the building process must have gone wrong here?
zImage building or
Generating the root file system?
Uart Prints:
U-Boot SPL 2013.01.01 (Sep 13 2019 - 01:35:54)
BOARD : Altera SOCFPGA Cyclone V Board
CLOCK: EOSC1 clock 25000 KHz
CLOCK: EOSC2 clock 25000 KHz
CLOCK: F2S_SDR_REF clock 0 KHz
CLOCK: F2S_PER_REF clock 0 KHz
CLOCK: MPU clock 800 MHz
CLOCK: DDR clock 400 MHz
CLOCK: UART clock 100000 KHz
CLOCK: MMC clock 50000 KHz
CLOCK: QSPI clock 3125 KHz
RESET: COLD
INFO : Watchdog enabled
SDRAM: Initializing MMR registers
SDRAM: Calibrating PHY
SEQ.C: Preparing to start memory calibration
SEQ.C: CALIBRATION PASSED
SDRAM: 1024 MiB
ALTERA DWMMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2013.01.01-00140-g0c9a3bdf3c (Sep 13 2019 - 01:28:34)
CPU : Altera SOCFPGA Platform
BOARD : Altera SOCFPGA Cyclone V Board
I2C: ready
DRAM: 1 GiB
MMC: ALTERA DWMMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Skipped ethaddr assignment due to invalid EMAC address in EEPROM
Net: mii0
Warning: failed to set MAC address
Hit any key to stop autoboot: 0
reading u-boot.scr
589 bytes read in 5 ms (114.3 KiB/s)
## Executing script at 02000000
-- Programming FPGA --
reading soc_system.rbf
7007204 bytes read in 361 ms (18.5 MiB/s)
## Starting application at 0x3FF785A4 ...
## Application terminated, rc = 0x0
-- Setting Env Variables --
reading zImage
4389688 bytes read in 246 ms (17 MiB/s)
reading soc_system.dtb
24091 bytes read in 9 ms (2.6 MiB/s)
## Flattened Device Tree blob at 00000100
Booting using the fdt blob at 0x00000100
Loading Device Tree to 03ff7000, end 03fffe1a ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.0-ge4c2b71c147d (gurmeet#gurmeet-VirtualBox) (gcc version 7.1.1 20170510 (Linaro GCC 7.1-2017.05) ) #1 SMP Sat Sep 14 10:50:07 IST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Terasic DE10 NANO
[ 0.000000] cma: Reserved 16 MiB at 0x3f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 14 pages/cpu #ef7ca000 s26892 r8192 d22260 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1012076K/1048576K available (7168K kernel code, 464K rwdata, 1436K rodata, 1024K init, 173K bss, 20116K reserved, 16384K cma-reserved, 245760K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB)
[ 0.000000] .data : 0xc0b00000 - 0xc0b742b4 ( 465 kB)
[ 0.000000] .bss : 0xc0b742b4 - 0xc0b9f80c ( 174 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410030c9, AUX_CTRL 0x46060001
[ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.000007] sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 21474836475ns
[ 0.000019] Switching to timer-based delay loop, resolution 10ns
[ 0.000248] GIC: PPI13 is secure or misconfigured
[ 0.000285] GIC: PPI13 is secure or misconfigured
[ 0.000481] Console: colour dummy device 80x30
[ 0.000506] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=1000000)
[ 0.000521] pid_max: default: 32768 minimum: 301
[ 0.000625] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000637] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001356] CPU: Testing write buffer coherency: ok
[ 0.001386] ftrace: allocating 23073 entries in 68 pages
[ 0.042460] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042709] Setting up static identity map for 0x100000 - 0x100058
[ 0.044448] GIC: PPI13 is secure or misconfigured
[ 0.044460] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.044549] Brought up 2 CPUs
[ 0.044568] SMP: Total of 2 processors activated (400.00 BogoMIPS).
[ 0.044575] CPU: All CPU(s) started in SVC mode.
[ 0.045480] devtmpfs: initialized
[ 0.051307] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.051529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.053213] NET: Registered protocol family 16
[ 0.055578] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.056834] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.056846] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.115503] vgaarb: loaded
[ 0.115792] SCSI subsystem initialized
[ 0.116038] usbcore: registered new interface driver usbfs
[ 0.116099] usbcore: registered new interface driver hub
[ 0.116166] usbcore: registered new device driver usb
[ 0.116328] sopc#0:usbphy#0 supply vcc not found, using dummy regulator
[ 0.117339] pps_core: LinuxPPS API ver. 1 registered
[ 0.117351] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti#linux.it>
[ 0.117377] PTP clock support registered
[ 0.117557] FPGA manager framework
[ 0.118986] clocksource: Switched to clocksource timer
[ 0.151378] NET: Registered protocol family 2
[ 0.151919] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.151999] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.152126] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.152208] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.152255] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.152425] NET: Registered protocol family 1
[ 0.152936] RPC: Registered named UNIX socket transport module.
[ 0.152947] RPC: Registered udp transport module.
[ 0.152954] RPC: Registered tcp transport module.
[ 0.152961] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.153628] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.154456] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.155247] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ 0.164377] NFS: Registering the id_resolver key type
[ 0.164411] Key type id_resolver registered
[ 0.164419] Key type id_legacy registered
[ 0.164435] Installing knfsd (copyright (C) 1996 okir#monad.swb.de).
[ 0.165053] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.165373] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.166615] bounce: pool size: 64 pages
[ 0.166628] io scheduler noop registered (default)
[ 0.174406] dma-pl330 ffe01000.dma: Loaded driver for PL330 DMAC-341330
[ 0.174424] dma-pl330 ffe01000.dma: DBUFF-512x8bytes Num_Chans-8 Num_Peri-32 Num_Events-8
[ 0.178453] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.179707] console [ttyS0] disabled
[ 0.179744] ffc02000.serial: ttyS0 at MMIO 0xffc02000 (irq = 24, base_baud = 6250000) is a 16550A
[ 0.766263] console [ttyS0] enabled
[ 0.771581] brd: module loaded
[ 0.774834] altera_ilc ff230000.ilc: Failed to register interrupt handler
[ 0.781634] altera_ilc ff230000.ilc: Failed to register interrupt handler
[ 0.788418] altera_ilc ff230000.ilc: Driver successfully loaded
[ 0.796364] libphy: Fixed MDIO Bus: probed
[ 0.801310] CAN device driver interface
[ 0.805522] socfpga-dwmac ff702000.ethernet: snps,phy-addr property is deprecated
[ 0.813151] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 0.818182] Ring mode enabled
[ 0.821237] DMA HW capability register supported[ 0.825749] Enhanced/Alternate descriptors
[ 0.829922] Enabled extended descriptors
[ 0.833913] RX Checksum Offload Engine supported
[ 0.838596] COE Type 2
[ 0.841040] TX Checksum insertion supported
[ 0.845290] Enable RX Mitigation via HW Watchdog Timer
[ 0.856614] libphy: stmmac: probed
[ 0.860049] eth0: PHY ID 00221622 at 1 IRQ POLL (stmmac-0:01) active
[ 0.866923] ffb40000.usb supply vusb_d not found, using dummy regulator
[ 0.873577] ffb40000.usb supply vusb_a not found, using dummy regulator
[ 0.880327] dwc2 ffb40000.usb: EPs: 16, dedicated fifos, 8064 entries in SPRAM
[ 0.887867] dwc2 ffb40000.usb: DWC OTG Controller
[ 0.892600] dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1
[ 0.899660] dwc2 ffb40000.usb: irq
[ 0.989000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 1.019146] dw_mmc ff704000.flash: 1 slots initialized
[ 1.024610] OF: /sopc#0/leds/fpga0: could not get #gpio-cells for /sopc#0/bridge#0xc0000000/leds#0x100000000
[ 1.034522] leds-gpio: probe of sopc#0:leds failed with error -22
[ 1.040771] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.046944] usbcore: registered new interface driver usbhid
[ 1.052514] usbhid: USB HID core driver
[ 1.056592] fpga_manager fpga0: Altera SOCFPGA FPGA Manager registered
[ 1.063805] altera_hps2fpga_bridge sopc#0:fpgabridge#0: fpga bridge [hps2fpga] registered
[ 1.072200] altera_hps2fpga_bridge sopc#0:fpgabridge#1: fpga bridge [lwhps2fpga] registered
[ 1.080687] altera_hps2fpga_bridge sopc#0:fpgabridge#2: fpga bridge [fpga2hps] registered
[ 1.089235] altera_fpga2sdram_bridge sopc#0:fpgabridge#3: fpga bridge [fpga2sdram] registered
[ 1.097728] altera_fpga2sdram_bridge sopc#0:fpgabridge#3: driver initialized with handoff 000001ff
[ 1.107005] oprofile: using arm/armv7-ca9
[ 1.111851] NET: Registered protocol family 10
[ 1.117061] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.123642] NET: Registered protocol family 17
[ 1.128087] NET: Registered protocol family 15
[ 1.132545] can: controller area network core (rev 20120528 abi 9)
[ 1.138755] NET: Registered protocol family 29
[ 1.143200] can: raw protocol (rev 20120528)
[ 1.147454] can: broadcast manager protocol (rev 20161123 t)
[ 1.153104] can: netlink gateway (rev 20130117) max_hops=1
[ 1.158791] 8021q: 802.1Q VLAN Support v1.8
[ 1.163021] Key type dns_resolver registered
[ 1.167350] ThumbEE CPU extension supported.
[ 1.171622] Registering SWP/SWPB emulation handler
[ 1.179767] hctosys: unable to open rtc device (rtc0)
[ 1.184823] of_cfs_init
[ 1.187332] of_cfs_init: OK
[ 1.190841] ttyS0 - failed to request DMA
[ 1.194993] Waiting for root device /dev/mmcblk0p2...
[ 1.238212] mmc0: Problem switching card into high-speed mode!
[ 1.244050] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz, actual 25000000HZ div = 1)
[ 1.253817] mmc0: new SDHC card at address 0001
[ 1.258775] mmcblk0: mmc0:0001 ASTC 7.45 GiB
[ 1.265186] mmcblk0: p1 p2 p3
[ 1.320560] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 1.350985] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.359101] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 1.366797] devtmpfs: error mounting -2
[ 1.373057] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
[ 1.379834] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 1.392908] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-ge4c2b71c147d #1
[ 1.399924] Hardware name: Altera SOCFPGA
[ 1.403946] [<c0112004>] (unwind_backtrace) from [<c010cc88>] (show_stack+0x20/0x24)
[ 1.411671] [<c010cc88>] (show_stack) from [<c04255b8>] (dump_stack+0x90/0xa4)
[ 1.418874] [<c04255b8>] (dump_stack) from [<c01e9978>] (panic+0xec/0x258)
[ 1.425738] [<c01e9978>] (panic) from [<c0739004>] (kernel_init+0x10c/0x11c)
[ 1.432769] [<c0739004>] (kernel_init) from [<c0108478>] (ret_from_fork+0x14/0x3c)
[ 1.440309] CPU1: stopping
[ 1.443013] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.0-ge4c2b71c147d #1
[ 1.450029] Hardware name: Altera SOCFPGA
[ 1.454033] [<c0112004>] (unwind_backtrace) from [<c010cc88>] (show_stack+0x20/0x24)
[ 1.461749] [<c010cc88>] (show_stack) from [<c04255b8>] (dump_stack+0x90/0xa4)
[ 1.468947] [<c04255b8>] (dump_stack) from [<c0110604>] (handle_IPI+0x2e0/0x2fc)
[ 1.476316] [<c0110604>] (handle_IPI) from [<c0101544>] (gic_handle_irq+0x98/0x9c)
[ 1.483857] [<c0101544>] (gic_handle_irq) from [<c010d84c>] (__irq_svc+0x6c/0x90)
[ 1.491305] Exception stack(0xef11bf58 to 0xef11bfa0)
[ 1.496335] bf40: 00000000 000004c6
[ 1.504479] bf60: ef7da370 c011bca0 ffffe000 00000002 c0b0302c c0b0307c c0b13c83 00000001
[ 1.512622] bf80: c08c86ec ef11bfb4 ef11bfb8 ef11bfa8 c0108f44 c0108f48 60000013 ffffffff
[ 1.520771] [<c010d84c>] (__irq_svc) from [<c0108f48>] (arch_cpu_idle+0x48/0x4c)
[ 1.528142] [<c0108f48>] (arch_cpu_idle) from [<c073dd44>] (default_idle_call+0x30/0x3c)
[ 1.536205] [<c073dd44>] (default_idle_call) from [<c0164760>] (cpu_startup_entry+0xe8/0x148)
[ 1.544699] [<c0164760>] (cpu_startup_entry) from [<c01100a8>] (secondary_start_kernel+0x15c/0x164)
[ 1.553708] [<c01100a8>] (secondary_start_kernel) from [<0010194c>] (0x10194c)
[ 1.560906] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
There was an error in mounting the ext4 partition of SD card. Rebuilding the Kernel and build root with right configuration solved the issue. (Enabled Support for large (2TB+) block devices and files).
I have an embedded system with power pc architecture 87xx. If I don't enable the "CONFIG_CGROUPS" in Linux kernel I can't mount the devtmpf i.e. ubifs file system.I am trying to understand what't the dependency of CGROUPS in mounting the nand filesystem running UBIFS.If I enable the CGROUPS then I can't execute the /sbin/init of the mounted root file system. What I could be doing wrong here?
This happens if I don't turned the CONFIG_CGROUPS=y in kernel.
Zone ranges:
DMA [mem 0x0000000000000000-0x000000001fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000001fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: ubi.mtd=1 rootfstype=ubifs root=ubi0:discofs rw console=tty S1,115200 serno=91101316 sku=700064090C hwrev==00:90:5E:12:32:05 mac1=00:90:5E:1 2:32:06 mac2=00:90:5E:12:32:07 mac3=00:90:5E:12:32:08 mac4=00:90:5E:12:32:09
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 511944K/524288K available (5972K kernel code, 272K rwdata, 1192K rodata, 192K init, 128K bss, 12344K reserved, 0K cma-reserved)
Kernel virtual memory layout:
* 0xfffdf000..0xfffff000 : fixmap
* 0xfdffe000..0xfe000000 : early ioremap
* 0xe1000000..0xfdffe000 : vmalloc & ioremap
NR_IRQS:512 nr_irqs:512 16
IPIC (128 IRQ sources) at e1000700
clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x12049cd416, max_id le_ns: 440795202745 ns
clocksource: timebase mult[ccccccd] shift[24] registered
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645 041785100000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
NET: Registered protocol family 16
PCI: Probing PCI hardware
Freescale Elo series DMA driver
vgaarb: loaded
SCSI subsystem initialized
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti#l inux.it>
PTP clock support registered
clocksource: Switched to clocksource timebase
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fsl-elo-dma e00082a8.dma: #0 (fsl,elo-dma-channel), irq 71
fsl-elo-dma e00082a8.dma: #1 (fsl,elo-dma-channel), irq 71
fsl-elo-dma e00082a8.dma: #2 (fsl,elo-dma-channel), irq 71
fsl-elo-dma e00082a8.dma: #3 (fsl,elo-dma-channel), irq 71
workingset: timestamp_bits=30 max_order=17 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
SGI XFS with security attributes, no debug enabled
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Oops: Exception in kernel mode, sig: 4 [#1]
disco
Modules linked in:
CPU: 0 PID: 8 Comm: kdevtmpfs Not tainted 4.12.28-disco-standard #1
task: df41b580 task.stack: df438000
NIP: c0100000 LR: c00fb708 CTR: c00b462c
REGS: df439c50 TRAP: 0700 Not tainted (4.12.28-disco-standard)
MSR: 00089032 <EE,ME,IR,DR,RI>
CR: 880ad872 XER: 00000000
GPR00: c00fb708 df439d00 df41b580 df69c170 00000000 df69c170 00000002 00000000
GPR08: 00000000 00000007 00000001 0e4e1c2f 280ad872 00000000 c0040514 df41d120
GPR16: 00000000 014000c0 00000007 00000000 00000000 0000002f 00000000 c078c840
GPR24: fffff000 00000000 00000000 df69c1cc df69c170 df41fd18 00000000 df69c170
NIP [c0100000] iput+0x24/0x1c8
LR [c00fb708] d_delete+0xb8/0xfc
Call Trace:
[df439d00] [c00fb000] dentry_unlink_inode+0xf0/0x164 (unreliable)
[df439d20] [c00fb708] d_delete+0xb8/0xfc
[df439d40] [c00eecc4] vfs_unlink+0x1b8/0x210
[df439d70] [c03c4f2c] handle_remove+0x1b0/0x324
[df439e50] [c03c5200] devtmpfsd+0x160/0x34c
[df439f00] [c0040650] kthread+0x13c/0x140
[df439f40] [c00103f0] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
39200001 7d234b78 4e800020 9421ffe0 93e1001c 7c7f1b79 41820094 7c0802a6
93a10014 90010024 93c10018 813f0058 <27051956> 9188a4bd 5d2e9c29 0039c48b
---[ end trace df78166105247941 ]---
My guess is you have a systemd-based system. In which case, init is provided by systemd, so is population of /dev. Systemd, in turn, makes extensive use of CGROUPS.
The ubifs/devtmpfs link is not a direct one, IMO. ubifs could be used without it too as long as /dev is correctly populated.
I'm trying to run the latest linux-omap kernel Linux-4.3.0-rc5-12674-g80923cf8e that I got from the official linux-omap GIT.
I compiled it with the multi_v7_defconfig, disabling unneeded boards and adding some debug options like earlyprintk.
I am now stuck with a kernel panic and I can't find what the problem is.
The board is IGEPv2 and I am using the omap3-igep0020.dts device tree file.
Kernel is loaded using the latest u-boot, if it helps.
Here's the bootlog. Any idea ?
## Booting kernel from Legacy Image at 80008000 ...
Image Name: Linux-4.3.0-rc5-12674-g80923cf8e
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4945528 Bytes = 4.7 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
Loading Device Tree to 8ffec000, end 8ffff0a2 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.3.0-rc5-12674-g80923cf8eb3b (b#b43) (gcc version 7.2.0 (Ubuntu/Linaro 7.2.0-6ubuntu1) ) #2 SMP Wed Feb 28 00:49:54 EST 2018
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine model: IGEPv2 Rev. C (TI OMAP AM/DM37x)
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] cma: Reserved 64 MiB at 0x9b800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c09aee00, node_mem_map dfad9000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130816 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[ 0.000000] PERCPU: Embedded 12 pages/cpu #dfa86000 s18572 r8192 d22388 u49152
[ 0.000000] pcpu-alloc: s18572 r8192 d22388 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: mem=512M console=ttyO2,115200n8 debug earlyprintk omapfb.mode=dvi:1024x768MR-16#60 root=/dev/mmcblk0p2 rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 442476K/523264K available (6856K kernel code, 370K rwdata, 2264K rodata, 396K init, 295K bss, 15252K reserved, 65536K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08f0590 (9122 kB)
[ 0.000000] .init : 0xc08f1000 - 0xc0954000 ( 396 kB)
[ 0.000000] .data : 0xc0954000 - 0xc09b0980 ( 371 kB)
[ 0.000000] .bss : 0xc09b3000 - 0xc09fcc0c ( 296 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] ⇥ Build-time adjustment of leaf fanout to 32.
[ 0.000000] ⇥ RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[ 0.008697] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.014770] Console: colour dummy device 80x30
[ 0.019439] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[ 0.084869] pid_max: default: 32768 minimum: 301
[ 0.089874] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.096801] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.105255] CPU: Testing write buffer coherency: ok
[ 0.110809] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.116394] Setting up static identity map for 0x80008340 - 0x80008398
[ 0.124786] Brought up 1 CPUs
[ 0.127929] SMP: Total of 1 processors activated (597.60 BogoMIPS).
[ 0.134521] CPU: All CPU(s) started in SVC mode.
[ 0.141571] devtmpfs: initialized
[ 0.190948] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 0.221343] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[ 0.229003] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[ 0.296447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.311370] pinctrl core: initialized pinctrl subsystem
[ 0.319793] NET: Registered protocol family 16
[ 0.328643] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.338317] cpuidle: using governor ladder
[ 0.342712] cpuidle: using governor menu
[ 0.347473] Reprogramming SDRC clock to 332000000 Hz
[ 0.360107] OMAP GPIO hardware version 2.5
[ 0.385833] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[ 0.391235] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[ 0.400299] platform 49042000.serial: Cannot lookup hwmod 'uart4'
[ 0.412506] No ATAGs?
[ 0.414703] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.422790] OMAP DMA hardware revision 4.0
[ 0.427307] Serial: AMBA PL011 UART driver
[ 0.458862] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[ 0.474639] vgaarb: loaded
[ 0.478942] SCSI subsystem initialized
[ 0.483337] libata version 3.00 loaded.
[ 0.488037] usbcore: registered new interface driver usbfs
[ 0.493957] usbcore: registered new interface driver hub
[ 0.499603] usbcore: registered new device driver usb
[ 0.506896] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4#48000000/scm#2000/pinmux#30/pinmux_i2c1_pins, deferring probe
[ 0.520629] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz
[ 0.526519] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4#48000000/scm#2000/pinmux#30/pinmux_i2c3_pins, deferring probe
[ 0.539611] pps_core: LinuxPPS API ver. 1 registered
[ 0.544860] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti#linux.it>
[ 0.554412] PTP clock support registered
[ 0.558990] EDAC MC: Ver: 3.0.0
[ 0.565734] clocksource: Switched to clocksource 32k_counter
[ 0.593200] NET: Registered protocol family 2
[ 0.598846] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.606323] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.613128] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.619903] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.626068] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.632873] NET: Registered protocol family 1
[ 0.638061] RPC: Registered named UNIX socket transport module.
[ 0.644226] RPC: Registered udp transport module.
[ 0.649230] RPC: Registered tcp transport module.
[ 0.654144] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.660919] PCI: CLS 0 bytes, default 64
[ 0.668243] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 0.680969] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.707794] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.715759] NFS: Registering the id_resolver key type
[ 0.721191] Key type id_resolver registered
[ 0.725585] Key type id_legacy registered
[ 0.729949] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.735290] jffs2: version 2.2. (NAND) <0xc2><0xa9> 2001-2006 Red Hat, Inc.
[ 0.743438] fuse init (API version 7.23)
[ 0.750671] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.758483] io scheduler noop registered
[ 0.762634] io scheduler deadline registered
[ 0.767242] io scheduler cfq registered (default)
[ 0.776153] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[ 0.783874] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[ 0.791748] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0025a0
[ 0.799713] pgd = c0004000
[ 0.802581] [fa0025a0] *pgd=48011452(bad)
[ 0.806823] Internal error: : 1028 [#1] SMP ARM
[ 0.811553] Modules linked in:
[ 0.814819] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc5-12674-g80923cf8eb3b #2
[ 0.823028] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 0.829589] task: db074000 ti: db078000 task.ti: db078000
[ 0.835235] PC is at pcs_readw+0x0/0x10
[ 0.839294] LR is at pcs_probe+0x388/0x804
[ 0.843597] pc : [<c02be958>] lr : [<c02c0700>] psr: 20000153
[ 0.843597] sp : db079de0 ip : 00000000 fp : 0000002e
[ 0.855560] r10: 00000000 r9 : 00000002 r8 : 00000000
[ 0.861053] r7 : 00000001 r6 : 00000000 r5 : 00000002 r4 : db2d4e10
[ 0.867828] r3 : c02be958 r2 : db21fc00 r1 : 00000002 r0 : fa0025a0
[ 0.874664] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
[ 0.882171] Control: 10c5387d Table: 80004019 DAC: 00000051
[ 0.888183] Process swapper/0 (pid: 1, stack limit = 0xdb078218)
[ 0.894439] Stack: (0xdb079de0 to 0xdb07a000)
[ 0.899017] 9de0: c0824d64 dfac90a0 c0974cd8 00000000 00000002 dfac90a0 0000000c c0824fcc
[ 0.907531] 9e00: db2d4ea8 00000000 db161c00 00000000 db2d4e40 db2d4e28 db2da9b0 db2da9b0
[ 0.916046] 9e20: c09b082f c0156d78 db2da9b0 00000000 00000000 c08302ec 00000001 c0156f34
[ 0.924560] 9e40: db163cd0 c08302ec 00000001 000000ec db163cd0 db2da7d0 db2da9b0 db163cd0
[ 0.933074] 9e60: c08302ec db161c10 ffffffed c0974cd8 fffffdfb 00000000 000000ec c094d048
[ 0.941589] 9e80: 00000000 c038b544 c09ec6ec db161c10 c0974cd8 00000000 00000000 c0389e2c
[ 0.950103] 9ea0: db161c10 c0974cd8 db161c44 00000000 00000000 c0389f9c 00000000 c0974cd8
[ 0.958587] 9ec0: c0389f18 c03882d0 db00cb5c db162434 c0974cd8 db2d9780 c0987578 c038940c
[ 0.967102] 9ee0: c0824d64 c09b3000 c0974cd8 c0974cd8 c0959bb0 db2db240 c0912288 c038a68c
[ 0.975616] 9f00: c0959bb0 c0959bb0 db2db240 c000985c 00000000 c014e320 c014ddd8 db11ab80
[ 0.984130] 9f20: 00000000 c096a858 00000000 c06aad30 dfeff132 c00504d0 cccccccd c08bebb8
[ 0.992645] 9f40: c085f958 00000006 00000006 c07f9410 c096a840 c09b3000 c09b3000 c0939830
[ 1.001159] 9f60: c09b3000 c09b3000 c0939834 c093983c 00000007 c08f1dc0 00000006 00000006
[ 1.009674] 9f80: 00000000 c08f159c 00000000 c0683b30 00000000 00000000 00000000 00000000
[ 1.018188] 9fa0: 00000000 c0683b38 00000000 c000f638 00000000 00000000 00000000 00000000
[ 1.026702] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.035186] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 fdfeffff f7ff777f
[ 1.043731] [<c02be958>] (pcs_readw) from [<c02c0700>] (pcs_probe+0x388/0x804)
[ 1.051269] [<c02c0700>] (pcs_probe) from [<c038b544>] (platform_drv_probe+0x48/0xa0)
[ 1.059417] [<c038b544>] (platform_drv_probe) from [<c0389e2c>] (driver_probe_device+0x1ec/0x2d8)
[ 1.068664] [<c0389e2c>] (driver_probe_device) from [<c0389f9c>] (__driver_attach+0x84/0x88)
[ 1.077423] [<c0389f9c>] (__driver_attach) from [<c03882d0>] (bus_for_each_dev+0x4c/0x9c)
[ 1.085937] [<c03882d0>] (bus_for_each_dev) from [<c038940c>] (bus_add_driver+0x18c/0x210)
[ 1.094543] [<c038940c>] (bus_add_driver) from [<c038a68c>] (driver_register+0x78/0xf4)
[ 1.102874] [<c038a68c>] (driver_register) from [<c000985c>] (do_one_initcall+0x8c/0x1d8)
[ 1.111389] [<c000985c>] (do_one_initcall) from [<c08f1dc0>] (kernel_init_freeable+0x158/0x1e8)
[ 1.120452] [<c08f1dc0>] (kernel_init_freeable) from [<c0683b38>] (kernel_init+0x8/0xe8)
[ 1.128875] [<c0683b38>] (kernel_init) from [<c000f638>] (ret_from_fork+0x14/0x3c)
[ 1.136779] Code: e5d00000 e6ef0070 f57ff04f e12fff1e (e1d000b0)
[ 1.143157] ---[ end trace 51c6d6f40dd2a6d2 ]---
[ 1.148040] In-band Error seen by MPU at address 0
[ 1.153167] ------------[ cut here ]------------
[ 1.158020] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xc4/0x118()
[ 1.167236] Modules linked in:
[ 1.170471] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G D 4.3.0-rc5-12674-g80923cf8eb3b #2
[ 1.179962] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 1.186523] [<c00174f0>] (unwind_backtrace) from [<c0012ff4>] (show_stack+0x10/0x14)
[ 1.194580] [<c0012ff4>] (show_stack) from [<c028eea8>] (dump_stack+0x80/0x90)
[ 1.202117] [<c028eea8>] (dump_stack) from [<c00365f0>] (warn_slowpath_common+0x80/0xb0)
[ 1.210540] [<c00365f0>] (warn_slowpath_common) from [<c00366bc>] (warn_slowpath_null+0x1c/0x24)
[ 1.219665] [<c00366bc>] (warn_slowpath_null) from [<c02b5ec0>] (omap3_l3_app_irq+0xc4/0x118)
[ 1.228546] [<c02b5ec0>] (omap3_l3_app_irq) from [<c00787e0>] (handle_irq_event_percpu+0x48/0x138)
[ 1.237884] [<c00787e0>] (handle_irq_event_percpu) from [<c0078918>] (handle_irq_event+0x48/0x6c)
[ 1.247100] [<c0078918>] (handle_irq_event) from [<c007b584>] (handle_level_irq+0xac/0x144)
[ 1.255798] [<c007b584>] (handle_level_irq) from [<c0077f24>] (generic_handle_irq+0x24/0x34)
[ 1.264587] [<c0077f24>] (generic_handle_irq) from [<c00781b0>] (__handle_domain_irq+0x5c/0xb4)
[ 1.273620] [<c00781b0>] (__handle_domain_irq) from [<c0013bd4>] (__irq_svc+0x54/0x70)
[ 1.281860] [<c0013bd4>] (__irq_svc) from [<c0038028>] (do_exit+0x3e0/0x988)
[ 1.289215] [<c0038028>] (do_exit) from [<c0013324>] (die+0x32c/0x330)
[ 1.296020] [<c0013324>] (die) from [<c0009380>] (do_DataAbort+0xb4/0xb8)
[ 1.303100] [<c0009380>] (do_DataAbort) from [<c0013b60>] (__dabt_svc+0x40/0x60)
[ 1.310821] Exception stack(0xdb079d90 to 0xdb079dd8)
[ 1.316101] 9d80: fa0025a0 00000002 db21fc00 c02be958
[ 1.324615] 9da0: db2d4e10 00000002 00000000 00000001 00000000 00000002 00000000 0000002e
[ 1.333129] 9dc0: 00000000 db079de0 c02c0700 c02be958 20000153 ffffffff
[ 1.340026] [<c0013b60>] (__dabt_svc) from [<c02be958>] (pcs_readw+0x0/0x10)
[ 1.347381] [<c02be958>] (pcs_readw) from [<c02c0700>] (pcs_probe+0x388/0x804)
[ 1.354888] [<c02c0700>] (pcs_probe) from [<c038b544>] (platform_drv_probe+0x48/0xa0)
[ 1.363067] [<c038b544>] (platform_drv_probe) from [<c0389e2c>] (driver_probe_device+0x1ec/0x2d8)
[ 1.372283] [<c0389e2c>] (driver_probe_device) from [<c0389f9c>] (__driver_attach+0x84/0x88)
[ 1.381072] [<c0389f9c>] (__driver_attach) from [<c03882d0>] (bus_for_each_dev+0x4c/0x9c)
[ 1.389587] [<c03882d0>] (bus_for_each_dev) from [<c038940c>] (bus_add_driver+0x18c/0x210)
[ 1.398193] [<c038940c>] (bus_add_driver) from [<c038a68c>] (driver_register+0x78/0xf4)
[ 1.406524] [<c038a68c>] (driver_register) from [<c000985c>] (do_one_initcall+0x8c/0x1d8)
[ 1.415039] [<c000985c>] (do_one_initcall) from [<c08f1dc0>] (kernel_init_freeable+0x158/0x1e8)
[ 1.424072] [<c08f1dc0>] (kernel_init_freeable) from [<c0683b38>] (kernel_init+0x8/0xe8)
[ 1.432495] [<c0683b38>] (kernel_init) from [<c000f638>] (ret_from_fork+0x14/0x3c)
[ 1.440368] ---[ end trace 51c6d6f40dd2a6d3 ]---
[ 1.445343] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.445343]
[ 1.454925] Rebooting in 300
I'm confused because there seem to be several stacktraces.
Also I wasn't able to get a more detailed stacktrace despite compiling the debug info in the kernel (but I suspect the debug info is not actually there as the file is surprisingly small)
The last supported kernel from the manufacturer ISEE for this board is 2.6.37 which is horribly old. There does not seem to be any problem with running more recent kernels but it's possible the device tree files have not been updated for long... I'm just looking for pointers of where this error might come from and I'll try to fix it.
Thanks !
I don't know what pcs is, but looks like it reads from wrong memory region.
[ 1.340026] [<c0013b60>] (__dabt_svc) from [<c02be958>] (pcs_readw+0x0/0x10)
[ 1.347381] [<c02be958>] (pcs_readw) from [<c02c0700>] (pcs_probe+0x388/0x804)
[ 1.354888] [<c02c0700>] (pcs_probe) from [<c038b544>] (platform_drv_probe+0x48/0xa0)
The reason why you getting page fault is an data abort in SVC (kernel) mode. That might happens because:
There is no any physical memory or IO space under physical addresses, which was specified in device tree for PCS driver. (possibly the used dtb is not compatible with the soc).
The memory which was accessed by pcs_readw is not mapped at all (or mapped with wrong attributes).
To figure out you need to check where virtual addresses, which are accessed by pcs_readw was mapped. What physical addresses are used. Check soc manual to be sure that this physical address fits in soc memory map.
Alex above nailed it !
I was writing an answer because I also found the problem in the meantime.
Basically, the board I am using, IGEPv2, was released in several revisions which use different CPUs. Apparently I have an early one (revision RB1) which uses an OMAP3530 CPU whereas the most recent ones are using a DM3730 CPU.
So, in the omap3-igep.dtsi file (used in the dts) I changed the include from omap36xx.dtsi to omap34xx.dtsi and boom, it boots successfully.
Wifi should not be working (because they changed the GPIO of the RESET pins of the Wifi and Bluetooth controller between the revisions) but now the system boots properly so it's just a matter of tracking the changes between the versions and editing the DTS files accordingly.
Hope this helps someone in the same boat - not sure if I'll be able to send these changes upstream so at least if someone Google the issue they'll find it !
Some background -
We are trying to run Qualcomm Atheros AR928X Wireless Network Adapter and have a crash right on driver load, following are our observations and questions.
The Atheros card "Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)" is plugged into the host system (datatron).
When I attach it to the DomU - the module "ath9k" is automatically loaded, but it gives an exception "iowrite32+0x2b/0x30".
No idea what the issue is (tried also with another Atheros Card (ath10k) - similar problem). When I try an Intel card, it works.
(the card also works on the Dom0 - so the Linux driver and HW is OK).
Debugging -
After some investigation with kgdb and iommu trace on DomU it seems the iomap of PCI BAR for the device returns a a mapping f which first 0x1000 bytes are read only and that causes access violation when trying to write registers mapped to this area (all the regs with offset < 0x1000) - why this happens i still don't know. Register writes with offsets > 0x1000 are fine.
Running same driver on Dom0 is totally fine
Bellow the sigsev backtrace and xen dmesg from DomU
As can be seen there is ioremap_ of size 0x10000 starting at ffffc900402c0000 but as i said, i noticed that anything bellow ffffc900402c1000 is not writable (from gdb using set addr = val) and only readable while anything above this address is writeable.
Question -
Please give any advise on this issue and especially how to approach debugging this both on Domu and Dom0 and where in xen code to look for possible issues.
[ 37.837467] ath9k 0000:00:00.0: Xen PCI mapped GSI16 to IRQ8
[ 37.837473] pcifront pci-0: read dev=0000:00:00.0 - offset 3d size 1
[ 37.837498] pcifront pci-0: read got back value 1
[ 37.837505] pcifront pci-0: read dev=0000:00:00.0 - offset 4 size 2
[ 37.840006] pcifront pci-0: read got back value 103
[ 37.853341] pcifront pci-0: read dev=0000:00:00.0 - offset c size 1
[ 37.853374] pcifront pci-0: read got back value 8
[ 37.853383] pcifront pci-0: write dev=0000:00:00.0 - offset d size 1 val a8
[ 37.853431] pcifront pci-0: read dev=0000:00:00.0 - offset 4 size 2
[ 37.853462] pcifront pci-0: read got back value 103
[ 37.853472] pcifront pci-0: write dev=0000:00:00.0 - offset 4 size 2 val 107
[ 37.853527] pcifront pci-0: read dev=0000:00:00.0 - offset 40 size 4
[ 37.853565] pcifront pci-0: read got back value 3c25001
[ 37.853574] pcifront pci-0: write dev=0000:00:00.0 - offset 40 size 4 val 3c20001
[ 37.855784] mmiotrace: ioremap_*(0xf7b00000, 0x10000) = ffffc900402c0000
[ 37.855842] pcifront pci-0: read dev=0000:00:00.0 - offset c size 1
[ 37.855879] pcifront pci-0: read got back value 8
[ 38.301919] BUG: unable to handle kernel paging request at ffffc900402c0040
[ 38.301930] IP: [<ffffffff8132387b>] iowrite32+0x2b/0x30
[ 38.301939] PGD 3fdf4067 PUD 3e1a8067 PMD 49d7067 PTE 80100000f7b00075
[ 38.301947] Oops: 0003 [#1] SMP
[ 38.301952] Modules linked in: ath9k(OE+) ath9k_common(OE) ath9k_hw(OE) ath(OE) mac80211(E) cfg80211(E) rfkill(E) xen_pcifront(E) intel_rapl(E) x86_pkg_temp_thermal(E) coretemp(E) crct10dif_pclmul(E) crc32_pclmul(E) evdev(E) ghash_clmulni_intel(E) pcspkr(E) uio_netx(E) uio(E) autofs4(E) ext4(E) ecb(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) crc32c_intel(E) aesni_intel(E) xen_netfront(E) xen_blkfront(E) aes_x86_64(E) glue_helper(E) lrw(E) gf128mul(E) ablk_helper(E) cryptd(E)
[ 38.302000] CPU: 0 PID: 696 Comm: systemd-udevd Tainted: G W OE 4.5.3-dbg #2
[ 38.302008] task: ffff8800044880c0 ti: ffff8800048a8000 task.ti: ffff8800048a8000
[ 38.302015] RIP: e030:[<ffffffff8132387b>] [<ffffffff8132387b>] iowrite32+0x2b/0x30
[ 38.302024] RSP: e02b:ffff8800048ab8c8 EFLAGS: 00010196
[ 38.302029] RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff88003ac34018
[ 38.302035] RDX: ffffc900402c0040 RSI: ffffc900402c0040 RDI: 0000000000000000
[ 38.302040] RBP: ffff8800048ab928 R08: 0000000000000016 R09: 0000000000000002
[ 38.302046] R10: ffffffff81b08000 R11: ffffffff81b07fc0 R12: 0000000000000016
[ 38.302051] R13: ffff880004b4d098 R14: ffff8800048abec0 R15: ffffffffc03c74c0
[ 38.302060] FS: 00007ff256fb18c0(0000) GS:ffff88003f800000(0000) knlGS:ffff88003f800000
[ 38.302068] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 38.302073] CR2: ffffc900402c0040 CR3: 0000000004a05000 CR4: 0000000000042660
[ 38.302079] Stack:
[ 38.302083] ffffffffc03a70f5 0000000000000040 ffff88003ac34018 ffffffffc0339a5b
[ 38.302092] ffff88003ac34018 ffff88003ac34068 ffff88003ac81520 0000809400008090
[ 38.302102] 0000000000008098 0000000000000000 0000000000000000 000000003c5869cf
[ 38.302111] Call Trace:
[ 38.302123] [<ffffffffc03a70f5>] ? ath9k_iowrite32+0xde/0xf5 [ath9k]
[ 38.302139] [<ffffffffc0339a5b>] ? ath9k_hw_update_mibstats+0x62/0xd6 [ath9k_hw]
[ 38.302155] [<ffffffffc033a722>] ? ath9k_enable_mib_counters+0xc2/0x119 [ath9k_hw]
[ 38.302171] [<ffffffffc033a983>] ? ath9k_hw_ani_init+0x148/0x14b [ath9k_hw]
[ 38.302182] [<ffffffffc0313b00>] ? ath9k_hw_post_init+0x104/0x16c [ath9k_hw]
[ 38.302195] [<ffffffffc0313f22>] ? __ath9k_hw_init+0x377/0x3fd [ath9k_hw]
[ 38.302206] [<ffffffffc031403e>] ? ath9k_hw_init+0x96/0xd6 [ath9k_hw]
[ 38.302218] [<ffffffffc03a877a>] ? ath9k_init_softc+0x643/0x823 [ath9k]
[ 38.302229] [<ffffffffc03a8f7d>] ? ath9k_init_device+0x43/0x21d [ath9k]
[ 38.302243] [<ffffffffc03aad2e>] ? ath9k_tasklet+0x462/0x462 [ath9k]
[ 38.302255] [<ffffffffc03c1638>] ? ath_pci_probe+0x2c8/0x38f [ath9k]
[ 38.302263] [<ffffffff815bab16>] ? _raw_spin_unlock_irqrestore+0x16/0x20
[ 38.302271] [<ffffffff814431a4>] ? __pm_runtime_resume+0x54/0x70
[ 38.302278] [<ffffffff813566ff>] ? local_pci_probe+0x3f/0x90
[ 38.302284] [<ffffffff81357ab0>] ? pci_device_probe+0x100/0x140
[ 38.302290] [<ffffffff8143853c>] ? driver_probe_device+0x21c/0x430
[ 38.302296] [<ffffffff814387cb>] ? __driver_attach+0x7b/0x80
[ 38.302301] [<ffffffff81438750>] ? driver_probe_device+0x430/0x430
[ 38.302308] [<ffffffff81436007>] ? bus_for_each_dev+0x67/0xb0
[ 38.302313] [<ffffffff8143773f>] ? bus_add_driver+0x1df/0x270
[ 38.302319] [<ffffffffc02f0000>] ? 0xffffffffc02f0000
[ 38.302324] [<ffffffff81438fe7>] ? driver_register+0x57/0xc0
[ 38.302334] [<ffffffffc03c19ad>] ? ath_pci_init+0x23/0x25 [ath9k]
[ 38.302345] [<ffffffffc02f000d>] ? ath9k_init+0xd/0x1000 [ath9k]
[ 38.302352] [<ffffffff81002122>] ? do_one_initcall+0xb2/0x200
[ 38.302358] [<ffffffff815b74d4>] ? preempt_schedule_common+0x14/0x30
[ 38.302363] [<ffffffff815b7509>] ? _cond_resched+0x19/0x20
[ 38.302371] [<ffffffff811cf032>] ? kmem_cache_alloc_trace+0x82/0x220
[ 38.302378] [<ffffffff8116d58a>] ? do_init_module+0x5b/0x1ce
[ 38.302384] [<ffffffff810fa676>] ? load_module+0x2146/0x2790
[ 38.302389] [<ffffffff810f71d0>] ? __symbol_put+0x60/0x60
[ 38.302395] [<ffffffff810f7628>] ? copy_module_from_fd.isra.51+0xf8/0x140
[ 38.302401] [<ffffffff810faed8>] ? SYSC_finit_module+0xa8/0xd0
[ 38.302408] [<ffffffff815bb072>] ? system_call_fast_compare_end+0xc/0x67
[ 38.302413] Code: 48 81 fe ff ff 03 00 48 89 f2 77 1f 48 81 fe 00 00 01 00 76 07 0f b7 d6 89 f8 ef c3 48 c7 c6 df 6a 84 81 48 89 d7 e9 85 fe ff ff <89> 3e c3 66 90 48 81 ff ff ff 03 00 77 28 48 81 ff 00 00 01 00
[ 38.302460] RIP [<ffffffff8132387b>] iowrite32+0x2b/0x30
[ 38.302466] RSP <ffff8800048ab8c8>
[ 38.302469] CR2: ffffc900402c0040
[ 38.302475] ---[ end trace 092ecee276c2da16 ]---
(XEN) Xen version 4.6.0 (Debian 4.6.0-1+nmu2) (ijc#debian.org) (gcc (Debian 5.3.1-8) 5.3.1 20160205) debug=n Tue Feb 9 17:46:27 UTC 2016
(XEN) Bootloader: GRUB 2.02~beta2-36
(XEN) Command line: placeholder log_lvl=all loglvl=all guest_loglvl=all iommu=verbose
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 3 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 0000000000099c00 (usable)
(XEN) 0000000000099c00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000020000000 (usable)
(XEN) 0000000020000000 - 0000000020200000 (reserved)
(XEN) 0000000020200000 - 0000000040004000 (usable)
(XEN) 0000000040004000 - 0000000040005000 (reserved)
(XEN) 0000000040005000 - 00000000d9d01000 (usable)
(XEN) 00000000d9d01000 - 00000000da191000 (reserved)
(XEN) 00000000da191000 - 00000000da192000 (ACPI data)
(XEN) 00000000da192000 - 00000000da2af000 (ACPI NVS)
(XEN) 00000000da2af000 - 00000000da6da000 (reserved)
(XEN) 00000000da6da000 - 00000000da6db000 (usable)
(XEN) 00000000da6db000 - 00000000da71e000 (ACPI NVS)
(XEN) 00000000da71e000 - 00000000daddf000 (usable)
(XEN) 00000000daddf000 - 00000000daff2000 (reserved)
(XEN) 00000000daff2000 - 00000000db000000 (usable)
(XEN) 00000000db800000 - 00000000dfa00000 (reserved)
(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed00000 - 00000000fed04000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000041e600000 (usable)
(XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT DA2A0080, 007C (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP DA2A9C58, 00F4 (r4 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: DSDT DA2A0190, 9AC5 (r2 ALASKA A M I 1 INTL 20051117)
(XEN) ACPI: FACS DA2ADF80, 0040
(XEN) ACPI: APIC DA2A9D50, 0092 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT DA2A9DE8, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG DA2A9E30, 003C (r1 ALASKA A M I 1072009 MSFT 97)
(XEN) ACPI: HPET DA2A9E70, 0038 (r1 ALASKA A M I 1072009 AMI. 5)
(XEN) ACPI: SSDT DA2A9EA8, 036D (r1 SataRe SataTabl 1000 INTL 20091112)
(XEN) ACPI: SSDT DA2AA218, 08A2 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
(XEN) ACPI: SSDT DA2AAAC0, 0A92 (r1 PmRef CpuPm 3000 INTL 20051117)
(XEN) ACPI: DMAR DA2AB558, 00B8 (r1 INTEL SNB 1 INTL 1)
(XEN) ACPI: ASF! DA2AB610, 00A5 (r32 INTEL HCG 1 TFSM F4240)
(XEN) ACPI: BGRT DA2AB6B8, 0038 (r0 ALASKA A M I 1072009 AMI 10013)
(XEN) System RAM: 16263MB (16653732kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000041e600000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd7e0
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - da2adf80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[da2adf8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
(XEN) Processor #3 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
(XEN) Processor #5 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) ERST table was not found
(XEN) ACPI: BGRT: invalidating v1 image at 0xce4c7018
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 8 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) Intel machine check reporting enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2292.620 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802bd010 -> ffff82d0802be240
(XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 3f
(XEN) PCI: MCFG area at f8000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) mwait-idle: MWAIT substates: 0x21120
(XEN) mwait-idle: v0.4 model 0x3a
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 8 CPUs
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 792 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1d59000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000040e000000->0000000410000000 (4062057 pages to be allocated)
(XEN) Init. ramdisk: 000000041d4d6000->000000041e5ff665
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81d59000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->0000008001f16498
(XEN) Start info: ffffffff81d59000->ffffffff81d594b4
(XEN) Page tables: ffffffff81d5a000->ffffffff81d6d000
(XEN) Boot stack: ffffffff81d6d000->ffffffff81d6e000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff81b2b1f0
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) .................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 288kB init memory.
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:16.0
(XEN) PCI add device 0000:00:16.3
(XEN) PCI add device 0000:00:19.0
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1b.0
(XEN) PCI add device 0000:00:1c.0
(XEN) PCI add device 0000:00:1c.1
(XEN) PCI add device 0000:00:1c.2
(XEN) PCI add device 0000:00:1c.4
(XEN) PCI add device 0000:00:1d.0
(XEN) PCI add device 0000:00:1f.0
(XEN) PCI add device 0000:00:1f.2
(XEN) PCI add device 0000:00:1f.3
(XEN) PCI add device 0000:01:00.0
(XEN) PCI phantom 0000:01:00.4
(XEN) PCI add device 0000:02:00.0
(XEN) PCI add device 0000:03:00.0
(XEN) PCI add device 0000:04:00.0
(XEN) PCI add device 0000:05:00.0
(XEN) PCI add device 0000:06:00.0
root#debian-guest-01:~# cat /proc/iomem
00000000-00000fff : reserved
00001000-0009ffff : System RAM
000a0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-3fffffff : System RAM
01000000-015bfd4c : Kernel code
015bfd4d-01b127ff : Kernel data
01c65000-01d3dfff : Kernel bss
f7b00000-f7b0ffff : 0000:00:00.0
f7b00000-f7b0ffff : ath9k
fee00000-fee00fff : Local APIC
root#debian-guest-01:~# lspci -vvvxxx
00:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f7b00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L1, Exit Latency L0s <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] MSI-X: Enable- Count=1 Masked-
Vector table: BAR=0 offset=00000000
PBA: BAR=0 offset=00000000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: ath9k
Kernel modules: ath9k