What have I tried
I wanted to create a way to make a faster pinging method for cmd than the normal '-t' command. So I came up with an idea to make two files and link them together:
The first st1.bat file contains
ping 10.10.10.10 -n 1
st2.bat
And the second st2.bat file contains
ping 10.10.10.10 -n 1
st1.bat
This creates a loop so it goes on forever.
The '-n' command is the number of packets you send. So by sending just one packet and then opening the second .bat file makes it a lot faster (30 milliseconds).
The command for extracting just the IP addresses is:
(#for /f "tokens=8" %a in ('tracert -4 -d wikipedia.org^|find "ms"') do #echo start ping %a)>ips.txt
What do I need
I want to combine these two codes and make 2 files for each IP to create a loop just like I showed you above. Every IP loop should have its own cmd window because if everything is in one window every packet should wait for the previous one to be done:
And finally link all the files together in one .bat file that I think will look like that:
Start st1.bat
Start st3.bat
Start st5.bat
Try to use: ping -n 1 -l 1
if you doesn't want
Firing with 1 bytes of data: try this command:
#echo off
:1
ping -n 1 -l 1 | find "TLL="
goto 1
Related
I'm getting complaints from employees in the field that our site is slow. When I check it -- the speed is acceptable. They are all going through a proxy server that is not controlled by me.
I'd like to run a continuous ping to the proxy server, but I haven't found anything to do that.
How do I check the speed from my site to a proxy server?
You can set up a cronjob to ping a site of your choice, at the frequency you choose. Here I ping google.com every 15 minutes. I can adjust the number of times I ping with the flag -c count and the time between pings with -i interval. This time is in seconds, I can use shorter intervals if required, for example 0.5.
I then pipe to tail -n to only use the last line with the results. At this stage my output is as follows:
rtt min/avg/max/mdev = 12.771/17.448/23.203/4.022 ms
We then use awk to only take the 4th field and use tr to replace the slashes with commas. Finally we store the result in a CSV file.
Here is the whole line in crontab:.
*/15 * * * * ping -c 5 -i 1 google.com | tail -n 1 | awk '{ print $4 }' | tr "/" "," >> /home/john/pingLog.csv
It is important to run this as root. To do so we edit the crontab using sudo:
sudo crontab -e
The end result is a comma separated file that you can open in Excel or equivalent, or process as you wish.
As noted in the ping output the 4 figures are min/avg/max/mdev.
Here is a version for Windows. The result is not so refined as we had in the Linux version but we're still getting the essentiels. You could put it in a .bat file and run it with a planned task or put it directly in the planned task.
ping google.com | findstr Minimum >> TotalPings.txt
Which adds the following line every time it is run:
Minimum = 23ms, Maximum = 23ms, Moyenne = 23ms
You can change the server pinged to suit your needs.
I am trying to create my first bash script. The goal of this script is to check at what rate my public IP changes. It is a fairly straight forward script. First it checks if the new address is different from the old one. If so then it should update the old one to the new one and print out the date along with the new IP address.
At this point I have created a simple script in order to accomplish this. But I have two main problems.
First the script keeps on printing out the IP even tough it hasn't changed and I have updated the PREV_IP with the CUR_IP.
My second problem is that I want the output to direct to a file instead of outputting it into the terminal.
The interval is currently set to 1 second for test purposes. This will change to a higher interval in the final product.
#!/bin/bash
while true
PREV_IP=00
do
CUR_IP=$(curl https://ipinfo.io/ip)
if [ $PREV_IP != "$CUR_IP" ]; then
PREV_IP=$CUR_IP
"$(date)"
echo "$CUR_IP"
sleep 1
fi
done
I also get a really weird output. I have edited my public IP to xx.xxx.xxx.xxx:
Sat 20 Mar 09:45:29 CET 2021
xx.xxx.xxx.xxx
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:--
while true
PREV_IP=00
do
is the reason you are seeing ip each loop. It's the same as while true; PREV_IP=00; do. The exit status of true; PREV_IP=00 is the exit status of last command - the exit status of assignment is 0 (success) - so the loop will always execute. But PREV_IP will be reset to 00 each loop... This is a typo and you meant to set prev_ip once, before the loop starts.
"$(date)"
will try execute the output of date command, as a next command. So it will print:
$ "$(date)"
bash: sob, 20 mar 2021, 10:57:02 CET: command not found
And finally, to silence curl, read man curl first and then find out about -s. I use -sS so errors are also visible.
Do not use uppercase variables in your scripts. Prefer lower case variables. Check you scripts with http://shellcheck.net . Quote variable expansions.
I would sleep each loop. Your script could look like this:
#!/bin/bash
prev=""
while true; do
cur=$(curl -sS https://ipinfo.io/ip)
if [ "$prev" != "$cur" ]; then
prev="$cur"
echo "$(date) $cur"
fi
sleep 1
done
that I want the output to direct to a file instead of outputting it into the terminal.
Then research how redirection works in shell and how to use it. The simplest would be to redirect echo output.
echo "$(date) $cur" >> "a_file.txt"
The interval is currently set to 1 second for test purposes. This will change to a higher interval in the final product.
You are still limited with the time it takes to connect to https://ipinfo.io/ip. And from ipinfo.io documentation:
Free usage of our API is limited to 50,000 API requests per month.
And finally, I wrote a script where I tried to use many public services as I found ,get_ip_external for getting external ip address. You may take multiple public services for getting ipv4 address and choose a random/round-robin one so that rate-limiting don't kick that fast.
What does /p stand for in set /p=? I know that / enables a switch, and I'm fairly sure that I know /a is for arithmetic. I've heard numerous rumours, some saying /p is for prompt, others stating it stands for print. The only reason I slightly doubt it is prompt is because in many cases it does not ask for a prompt, yet prints on the screen, such as
<nul set /p=This will not generate a new line
But what I want to know is: Do we really know what it stands for?
The /P switch allows you to set the value of a variable to a line of input entered by the user. Displays the specified promptString before reading the line of input. The promptString can be empty.
Two ways I've used it... first:
SET /P variable=
When batch file reaches this point (when left blank) it will halt and wait for user input. Input then becomes variable.
And second:
SET /P variable=<%temp%\filename.txt
Will set variable to contents (the first line) of the txt file. This method won't work unless the /P is included. Both tested on Windows 8.1 Pro, but it's the same on 7 and 10.
For future reference, you can get help for any command by using the /? switch, which should explain what switches do what.
According to the set /? screen, the format for set /p is SET /P variable=[promptString] which would indicate that the p in /p is "prompt." It just prints in your example because <nul passes in a nul character which immediately ends the prompt so it just acts like it's printing. It's still technically prompting for input, it's just immediately receiving it.
NOTE: The answers below this point are for a previous version of the question.
/L in for /L generates a List of numbers.
From ping /?:
Usage: ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS]
[-r count] [-s count] [[-j host-list] | [-k host-list]]
[-w timeout] [-R] [-S srcaddr] [-4] [-6] target_name
Options:
-t Ping the specified host until stopped.
To see statistics and continue - type Control-Break;
To stop - type Control-C.
-a Resolve addresses to hostnames.
-n count Number of echo requests to send.
-l size Send buffer size.
-f Set Don't Fragment flag in packet (IPv4-only).
-i TTL Time To Live.
-v TOS Type Of Service (IPv4-only. This setting has been deprecated
and has no effect on the type of service field in the IP Header).
-r count Record route for count hops (IPv4-only).
-s count Timestamp for count hops (IPv4-only).
-j host-list Loose source route along host-list (IPv4-only).
-k host-list Strict source route along host-list (IPv4-only).
-w timeout Timeout in milliseconds to wait for each reply.
-R Use routing header to test reverse route also (IPv6-only).
-S srcaddr Source address to use.
-4 Force using IPv4.
-6 Force using IPv6.
I want to write a simple .bat file that will ping a number of IP addresses (to confirm servers are online) in turn, without me having to type "ping server name" each time
I looked at resources and those mentioning the wait command seem to all reference if the IP address in unknown
so what i would like is
Ping 10.X.X.1
Wait 10 seconds (or however long it takes to display the standard 4 ping response)
Ping 10.X.X.2
Wait 10 seconds (or however long it takes to display the standard 4 ping response)
Ping 10.X.X.3
and so on
so you know the addresses and are visually checking if any responds?
you should be able to use the -n option to limit ping to 4 pings per address:
;pingall.bat
ping -n 4 10.X.X.1
ping -n 4 10.X.X.2
ping -n 4 10.X.X.3
let me know if I misunderstood what you are trying to do
EDIT:
If you have a known list of IPs you can ping them via a list:
for %i in (1, 2, 3, 8, 9, 11, 110) do ping -n 4 10.X.X.%i
If you want to ping a range of IPs use this (start, increment, end):
for /l %i in (1,1,254) do ping -n 4 10.X.X.%i
Have a text file w/ around 3 million URL's of sites I want to block.
Trying to ping them one by one (yes, I know it is going to take some time).
Have a script (yes, I am a bit slow in BASH) which reads the lines one at a time from text file.
Obviously cannot print text file here. Text file was created >> w/ Python some time ago.
Problem is that ping returns "unknown host" w/ every entry. If I make a smaller file by hand using the same entries the script works. I thought it may be a white space or end of line issue so tried addressing that in script. What could the issue possibly be?
#!/bin/bash
while read line
do
li=$(echo $line|tr -d '\n')
li2=$(echo $li|tr -d ' ')
if [ ${#line} -lt 2 ]
then
continue
fi
ping -c 2 -- $li2>>/dev/null
if [ $? -gt 0 ]
then
echo 'bad'
else
echo 'good'
fi
done<'temp_file.txt'
Does the file contains URLs or hostnames ?
If it contains URLs you must extract the hostname from URLs before pinging:
hostname=$(echo "$li2"|cut -d/ -f3);
ping -c 2 -- "$hostname"
Ping is used to ping hosts. If you have URLs of websites, then it will not work. Check that you have hosts in your file , example www.google.com or an IP address and not actual full website urls. If you want to check actual URLs, use a tool like wget and another tool like grep/awk to grab for errors like 404 or others. Last but not least, people who are security conscious will sometimes block pinging from the outside, so take note.
C heck if the file contains windows-style \r\n line endings: head file | od -c
If so, to fix it: dos2unix filename filename
I wouldn't use ping for this. It can easily be blocked, and it's not the best way to check for either ip addresses or if a server presents web pages.
If you just want to find the corresponding IP, use host:
$ host www.google.com
www.google.com is an alias for www.l.google.com.
www.l.google.com has address 209.85.149.106
www.l.google.com has address 209.85.149.147
www.l.google.com has address 209.85.149.99
www.l.google.com has address 209.85.149.103
www.l.google.com has address 209.85.149.104
www.l.google.com has address 209.85.149.105
As you see, you get all the IPs registered to a host. (Note that this requires you to parse the hostname from your urls!)
If you want to see if a URL points at a web server, use wget:
wget --spider $url
The --spider flag makes wget not save the page, just check that it exists. You could look at the return code, or add the -S flag (which prints the HTTP headers returned)