I installed .net6 but i need to have installed .net5
So, I removed .net6 and I installed .net5.
Now, when I run 'dotnet build' command I have the error:
A fatal error occurred. The folder [/usr/lib/dotnet/dotnet6-6.0.108/host/fxr] does not exist
Do you have some idea to help me, please.
Thanks
.NET 5 has reached its End of Life. If you are using it, you are on your own; don't expect any fixes for security issues that discovered every few weeks.
Anyway, sounds like you are using Ubuntu 22.04.
If so, you are out of luck. There's no simple way to install or run .NET 5 there. .NET 5 needs OpenSSL 1.0 or 1.1. Ubuntu 22.04 only has OpenSSL 3.0. Even if you install and manage to run .NET 5, it wont work and you will get OpenSSL errors.
Your best course of action is to install an older version of Ubuntu, such as 20.04.
Your specific error in this case is quite unrelated to above, though. Your error is because you seem to have installed some packages from Ubuntu's package repository and some packages from Microsoft's package repository. See https://github.com/dotnet/core/issues/7699#issuecomment-1222470580 for details. In particular you want to follow the steps in "Mixed state scenario 2: Use PMC packages after installing native Jammy packages". But that's not needed on Ubuntu 20.04 or similar OS that you need to make .NET 5 work at all.
I am encountering the following messages after upgrading to macOS Catalina on my terminal whenever I start up a new terminal:
/Users/<myname>/Downloads/google-cloud-sdk/path.bash.inc:3: = not found
/Users/<myname>/Downloads/google-cloud-sdk/completion.bash.inc:56: command not found: complete
/Users/<myname>/Downloads/google-cloud-sdk/completion.bash.inc:81: command not found: complete
/Users/<myname>/Downloads/google-cloud-sdk/completion.bash.inc:82: command not found: complete
I have re-run the ./install.sh command and gcloud commands work fine. How do I remove the above messages, or is there something else that is still missing?
EDIT:
Upgraded to macOS 10.15.4 and installed google-cloud-sdk is from here, the macOS 64-bit version.
I solved the same issue by following the instruction: https://gist.github.com/dwchiang/10849350. Simply, change the path.bash.inc into path.zsh.inc in ~/.bash_profile, same as the completion.zsh.inc.
This seems to be an issue with the fact that Cloud SDK is assuming that you are using bash while Catalina now uses Zsh by default as mentioned here. You may be able to remove the error by changing to bash by following the instructions over the link I shared, however, I can not test this out at the moment.
I also recommend you to report this issue to Google directly over at their issue reporting page so it can be reviewed and corrected if possible.
Additionally, make sure that you are using the latest Cloud SDK version by running the gcloud components update so that you can better report this on the issue.
I hope you find this information useful.
I have been bogging my mind on this one for a few days with various versions of python and freeze utilities.
Python 3.6, PyQt5
I created a script, and am trying to make a standalone .exe
However, when running pyinstaller, I get the result I have posted below. I am currently using an Anaconda distribution, so I am not sure if this has anything to do with it. How do I resolve this issue?
I have tried to fix it for several days using different python and pyqt versions, but the short story is that some of the libraries I am using come into conflict in other versions. I am posting this again because nothing else has really worked, and I am on my last straws.
Thanks in advance.
Error Window:
From this page:
PyQt5 - Failed to load platform plugin "windows". Available platforms are: windows, minimal
this answer solved my problem.
Copying the folder platforms from python installation directory into my built folder solved the problem. the "platforms" folder contains qminimal.dll.
Maybe it helps you too!
Can you try to install Anaconda in a folder that does not use non-ascii characters?
Also, you say you have done conda update --all, but your Qt version states 5.6.0. Last week we released version 5.6.2, so conda update --all should have got that version for you.
Perhaps try conda update qt and see that it installs 5.6.2?
I just updated the sdk to 4.1.4 and trying to install clay from command line I get the following message:
This projected is outdated (try 'pebble convert-project' or'pebble sdk install 2.9')
Now, I am not going to install the 2.9 sdk, of course, and I know that convert is just going to change appinfo.json into pakage.json, which I don't need to do because I am already on sdk 4.1.4.
Has anybody here had the same issue, how did you solve it?
Pebble-Clay is a JS package that can also be installed by running
npm install pebble-clay
This fixes the issue.
Alternatively downloading and installing the SDK 2.9 will fix it. (This will not overwrite the latest version of the SDK.)
I have recently tried to install Python 3.4 as an alternative installation on my system in an attempt to familiarise myself before migrating code. My main Python installation is 2.7.6.
I tried the 64 bit installer for Windows, but it came up with an error message
There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
After this the install is rolled back (from the point shown below):
I have eventually found a solution to this posted below and decided to share in case anyone else was having the same issue.
After some looking online I found (here) that the issue was related to conflicting pip installs (I have a version already installed for Python 2.7 and apparently this is not compatible with the version that ships with Python 3.4.
To get around this issue I simply de-selected pip from the install options shown below and the install went ahead smoothly:
Run installer again and select PIP installation.
If the PIP fails to install with the same error, you may want to check environmental variables using a tool like http://eveditor.com/ which enables to check whether they are valid. If you had another version installed before, you most likely have wrong PYTHONHOME and PYTHONPATH variables. Fix them by setting them to relevant paths. e.g. PYTHONHOME=C:\python27 and PYTHONPATH=c:\python27\Lib
You will then be able to run and install PIP.
My issue was that I had a PYTHON_HOME or PYTHON_SOMETHING environment variable set. After removing the environment variable, the installation worked perfectly.
What worked for me, strangely enough, was the "Microsoft Program Install and Uninstall troubleshooter"
The "deselect pip" solution did not work for me.
My Python 3.4.1 install was failing with the same "A program run as part of the setup did not finish as expected" error. I tried both installing it on top of Python 3.4.0 and installing it in a new folder, but got the same error. I tried uninstalling Python 3.4.0 first, but got the error during the uninstall, as well.
I ran that Microsoft utility, which helped me uninstall 3.4.0, and was then able to install 3.4.1 cleanly. The utility has options for both problematic installs and uninstalls, so it may help even if you're doing a new install, not an upgrade.
I'm running 64-bit Windows 7, but was working with 32-bit Python versions.
I had similar issues with Python 3.4x on Windows 8.1. Even after a successful install, the uninstaller would fail in the same way. Ultimately, "Method 1" at the MS forum solved this for me when I ran Microsoft's (Un)installer Fix It.
I also had the problem that pip couldn't be installed like #ChrisPosser.
So I deselected pip and the installation went fine. afterwards I restarted the setup, chose "change python" and installed pip. now everything worked like expected.
If you have any problems with windows installers I recommend activating the verbose log like this:
msiexec /i python-2.7.10-1.609.2.msi /lv install-python.log
From the logs I could see that it was the pip install, which was not working.
Yes, I faced the same issue, and was working on this for the past one hour. Was trying to uninstall the Python 3.4.1 from the control panel -> uinstall program -> add/remove program, but was facing issues.
This trick worked for me:
Manually deleted the 3.4.1 folder, which was present in my C folders after I installed the 3.4.1
Then I followed these steps:
-> Went to Regedit.exe, checked in both HKEY_CURRENT_USER, HKEY_LOCAL SOFTWARE Folder, and deleted the Python folders there.
-> windows 8 -> Downloads -> 3.4.1 msi setup (Glad I never deleted it)
-> Right clicked on the msi setup and choose the repair option
-> The repair would re install the Python 3.4.1
-> After this, I un-installed the Python 3.4.1
-> Then I deleted the 3.4.1 msi setup.
Rebooted the system, and now, there is no instance of Python 3.4.1 in my system.
According to me when environment variables containing name 'Python' are created they somehow becomes related with python. I was unable to open idle (GUI PUTHON) and to uninstall it . Deleting a variable named 'PYTHON PATH' solved my all python related problems.
I had 3.7.4 and wanted to move to 2.7.13.
I uninstalled 3.7.4
Tried to install 2.7.13 but got the same error.
There was a 2.7.10 installer(not msi) also present, uninstalling which gave the same error.
So I downloaded 2.7.10 msi, installed it, and then just installed 2.7.13 from the downloaded msi and it worked fine. This overwriting worked because the major version i.e. 2.7 was same for both.
I don't know if this is helpful but after the hours I spent on this, I wanted to write out what worked for me.
Yup, I have already installed another version of python. I have uninstalled them using Program features. But still the same issue persisted because of the folder which was present in my C: drive. After deleting them manually, the installation got completed without errors
I faced this issue because of 2 conflicting versions of 7zip. Removing them both and installing just one fixed this issue.
I had python3.4 installed, then added 3.5, and deleted 3.4. That was a mistake. In trying to get a library to work, I had to go back to 3.4. I uninstalled 3.5, but couldn't uninstall 3.4 (folder deleted).
I ended up searching the registry in rededt32 for "python". There was a Guid folder with a number of entries that had c:\python34 and one more related to the same folder that I deleted. After this, the install worked correctly.
Windows 10.
Mine was linked to having installed an older version in the past, only for my own user account. I got around it by telling the installer to install Python for all users.
For me none of the suggested fixes worked for me. However checking the option "Install just for me" instead of "Install for all users" (Windows 10) worked for me. So this might be another option to try.