I'm running into this issue after installing USDZ tools from Apple's website. I'm a bit rusty at Python and tried installing all the underlying packages.
I set my PYTHONPATH already using export PYTHONPATH="/Users/gt/usdpython/USD/lib/python:$PYTHONPATH"
USD git:(master) ✗ usdzconvert
Traceback (most recent call last):
File "/Users/gt/usdpython/usdzconvert/usdzconvert", line 17, in <module>
usdUtils.printError("failed to import pxr module. Please add path to USD Python bindings to your PYTHONPATH.")
NameError: name 'usdUtils' is not defined
Download the latest version – usdpython 0.66 from https://developer.apple.com.
You need to paste these 3 lines inside .zshrc file – you can see how to create it HERE.
export PYTHONPATH="/Users/gt/usdpython/USD/lib/python:$PYTHONPATH"
export PATH="/Users/gt/usdpython/USD:$PATH"
export PATH="/Users/gt/usdpython/usdzconvert:$PATH"
P.S.
Do not use the version of usdpython_0.63 (Feb 5, 2020) because it unfortunately causes errors.
Run Rosetta Terminal fixes it.
https://developer.apple.com/forums/thread/671459
Related
I have just updated my spyder4 to spyder5 as:
conda update spyder
as I try to launch spyder it gives an Error : No module named 'qdarkstyle.colorsystem'
Here is the complete information :
Traceback (most recent call last):
File "/home/sina/anaconda3/envs/py37/bin/spyder", line 11, in <module>
sys.exit(main())
File "/home/sina/anaconda3/envs/py37/lib/python3.7/site-packages/spyder/app/start.py", line 210, in main
from spyder.app import mainwindow
File "/home/sina/anaconda3/envs/py37/lib/python3.7/site-packages/spyder/app/mainwindow.py", line 72, in <module>
from spyder.app import tour
File "/home/sina/anaconda3/envs/py37/lib/python3.7/site-packages/spyder/app/tour.py", line 37, in <module>
from spyder.utils.qthelpers import add_actions, create_action
File "/home/sina/anaconda3/envs/py37/lib/python3.7/site-packages/spyder/utils/qthelpers.py", line 34, in <module>
from spyder.utils.icon_manager import ima
File "/home/sina/anaconda3/envs/py37/lib/python3.7/site-packages/spyder/utils/icon_manager.py", line 23, in <module>
from spyder.utils.palette import QStylePalette, SpyderPalette
File "/home/sina/anaconda3/envs/py37/lib/python3.7/site-packages/spyder/utils/palette.py", line 12, in <module>
from qdarkstyle.colorsystem import Blue, Gray
ModuleNotFoundError: No module named 'qdarkstyle.colorsystem'
I would appreciate any comments on it.
Met with similar problem. I reverted back to previous version till the devs sort the problem out.
conda install spyder=4.2.5
Same problem on Win. To rollback, using miniconda command is the same:
conda install spyder=4.2.5
If you have activated a dedicated environment (named "xyz" here) first go to "base" and update the package repository (in miniconda its conda update conda), then activate the environment you want to operate on. Note: the package repository resides only in "base", however you can have as many custom environments, each installing and running its own version of Sypder (and any other packages installed, dedicated to that environment)
activate base #go to the base to update the package repository first
conda update conda #in miniconda just update conda, not anaconda
activate xyz
conda install spyder=4.2.5
Version 5 reportedly unstable till May-June
For all people that have this problem right now: if you want to use a
very stable and well tested Spyder version, please stay with our
latest version of Spyder 4 (we plan to maintain it for two more months
with small bug fixes). Spyder 5 is still a work in progress and it'll
take us two or three months until reaches the same level of stability.
ccordoba12 https://github.com/spyder-ide/spyder/issues/15113
If you want to play with 5.0 first in a new environment named "tmp":
conda create --name tmp
activate tmp
conda install spyder=5.0.0
Later, can easily blow away that entire environment and everything in it.
conda env remove --name tmp
I tried conda install -c conda-forge qdarkstyle=3.0.2 and it worked. But yeah there are few other bugs but spyder does seem to start.
They notified me that the problem had been fixed and how to get a working version. The remedy is
conda install spyder=5.0.0=*_1
I did so and it is working as expected.
On windows 10 using conda install qdarkstyle=3.0.2
return spyder to ver 4.2.3, but it is working. Anaconda typically fix such a bugs after few days.
I tried downgrading qdarkstyle package using conda install qdarkstyle 2.8.1 and it worked for me. Win 10 64 bit anaconda spyder IDE
On Windows 10 using WinPython and Spyder 5.0.3. I was having this issue with a local module import.
The simple fix was that my PYTHONPATH had gotten reset in the upgrade, and adding back in the relevant folders fixed this.
I am relatively new to Linux/Ubuntu (so please take it easy on me) and I am trying to install Autokey to use the text expansion functionality. I have tried installing it from the instructions on the Github page here - https://github.com/autokey/autokey#installation
However, no matter whether I follow the installation process under the Ubuntu/Mint/Debian section or the instructions to install via pip I cannot seem to get the program working.
The installation seems to be successful (running a 'which' command gives the path installed) but clicking on the icon does not launch the program.
I have also tried to install directly from Ubuntu/GNOME software manager but that also will not launch the program once installed.
I have tried installing both the GTK and QT frontends and neither will launch. I don't get an error message or anything. I have opened up the System Monitor to see if a process even appears (however briefly) and there's nothing.
Typing autokey-gtk into Terminal gives:
/usr/local/lib/python2.7/dist-packages/autokey/gtkapp.py:24: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk, Gdk, GObject, GLib
Traceback (most recent call last):
File "/usr/local/bin/autokey-gtk", line 20, in <module>
from autokey.gtkapp import Application
File "/usr/local/lib/python2.7/dist-packages/autokey/gtkapp.py", line 28, in <module>
import service, monitor
File "/usr/local/lib/python2.7/dist-packages/autokey/service.py", line 21, in <module>
from iomediator import Key, IoMediator
File "/usr/local/lib/python2.7/dist-packages/autokey/iomediator.py", line 107, in <module>
from interface import *
File "/usr/local/lib/python2.7/dist-packages/autokey/interface.py", line 29, in <module>
from Xlib import X, XK, display, error
ImportError: No module named Xlib
Can anyone please help? Thank you.
I am a newbie too and installed Autokey 0.90.4, which did not work for me either. Someone suggested I try 0.95.1 because the other version is 7 years old.
I installed the new version with some acrobatics from the Autokey Github page, using the PIP method. At 1st it did not work, but after doing import setuptools it did. That might be a coincidence since it was after installation of the Ak package itself.
I know this sounds convoluted, but I am not familiar (yet?) with Linux. Anyway 0.95 works for me.
install module python-xlib and it will work, like this:
On Deb:
apt install python3-xlib
You might later need python autokey module as well:
pip install autokey
I have some difficulties trying to install Scipy for Python 3.5 on a Windows 10 machine and I hope I can find some help here. So here is what I have done so far.
I have downloaded the numpy+mkl for python 3.5 and 64bit version as well as the scipy0.18.1 for the same versions, from Gohlke's website
I installed the numpy+mkl whl with:
python -m pip install numpy-1.11.2+mkl-cp35-cp35m-win_amd64.whl
all goes well.
then I install the scipy package the same way like:
python -m pip install scipy-0.18.1-cp35-cp35m-win_amd64.whl
This also completes.
However, when I try to run python afterwards I get the following error:
Fatal Python error: Py_Initialize: can't initialize sys standard streams
Traceback (most recent call last):
File "C:\Python35\Lib\site-packages\scipy\io\__init__.py" , line 97, in <module>
File "C:\Python35\Lib\site-packages\scipy\io\matlab\__init__.py", line 13 in <module>
File "C:\Python35\Lib\site-packages\scipy\io\matlab\mio.py", line 8 in <module>
ImportError: No module named 'numpy'
I also get a pop-up that Python has stopped working.
I have tried a different order in which I installed the packages, but all lead to the error mentioned when Scipy is installed.
I also installed did this on a windows 7 machine and there it works.
Does anybody have any idea what causes this issue?
I also had some issues. So I just installed Anaconda3 insted of python directly.
I have recently installed SimpleCV on Windows 10 from the superpack. Everything went well during the installation, and I was able to successfully run the first example problem in "Practical Computer Vision with SimpleCV" (good book, btw) from within IDLE. Here's the code:
from SimpleCV import Camera, Display, Image
cam = Camera()
display = Display()
img = cam.getImage()
img.save(display)
Simple enough, and it worked fine. Where I ran into problems was when I tried to start up the SimpleCV console. First of all, no link was created on the Windows desktop, and there was nothing for SimpleCV on the Start menu. So, I tried the other methods listed in the book. First, from the console, I tried to run it as a Python module:
C:\User> python -m SimpleCV.init
And what I got back was:
ERROR:
Traceback (most recent call last):
File "C:\Python27\lib\runpy.py", line 162, in _run_module_as_main
"__main__", fname, loader, pkg_name)
File "C:\Python27\lib\runpy.py", line 72, in _run_code
exec code in run_globals
File "C:\Python27\lib\site-packages\SimpleCV\__init__.py", line 18 in <module>
from SimpleCV.Shell import *
File "C:\Python27\;ib\site-packages\SimpleCV\Shell\__init__.py", line 1, in <module>
from Shell import *
File "C:\Python27\lib\site-packages\SimpleCV\Shell\Shell.py", line 54, in <module>
raise(e)
ImportError: No module named IPython
Next, I tried the listed alternative: just starting python and importing and executing the Shell. Entering:
>>> from SimpleCV import Shell
resulted in the same error as above.
I also tried installing ipython by running pip. But, it looks like pip didn't get installed either.
So, what environmental variable did the installation program not set correctly? Just so you know, I posted this same question on the SimpleCV site, but have not received a response as of yet.
--- 23 Dec 2015
Chipping away at this. Read the banner on setuputils install. Ran Python27\Scripts\easy_install.exe. Can now call pip. However, entering this at the command line:
C:\Users> pip install ipython
gives this error:
C:\Python27\lib\site--packages\pip-7.1.2-py2.7.egg\pip\_vendor\requests\packages\urllib3\util\ssl_.py:90: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cuase certain SSL connections to fail. For more information, see...
So, I'm making progress. Any suggestions?
Have you tried to install ipython from source code?
$ tar -xzf ipython.tar.gz
$ cd ipython
$ python setup.py install
See https://ipython.org/ipython-doc/3/install/install.html
There are a lot of requirements more. I recommend the SimpleCV's github repository instructions https://github.com/sightmachine/SimpleCV#windows-8
I am trying to install Boa Constructor on windows 7. I am using python 27.
After installing when i run Boa.py it gave me an error
Starting Boa Constructor v0.6.1
importing wxPython
reading user preferences
Created directory: C:\Users\SONY\.boa-constructor
Created directory: C:\Users\SONY\.boa-constructor\docs-cache
Created directory: C:\Users\SONY\.boa-constructor\Plug-ins
Traceback (most recent call last):
File "C:\Python27\Lib\site-packages\boa-constructor\Boa.py", line 271, in <mod
ule>
import Preferences, Utils
File "C:\Python27\Lib\site-packages\boa-constructor\Preferences.py", line 151,
in <module>
execfile(file)
File "C:\Users\SONY\.boa-constructor\prefs.rc.py", line 26, in <module>
splitterStyle = wx.SP_LIVE_UPDATE | wx.SP_3DSASH | wx.NO_3D
AttributeError: 'module' object has no attribute 'NO_3D'
Can somebody please help
Boa Constructor appears to be importing wx incorrectly. It should not be doing this: import wxPython. That was deprecated many years ago. I am guessing you are using wxPython 3.x, which Boa Constructor does not support. If you want to continue using this tool, you will have to downgrade your wxPython installation.
I too faced the same problem and downgrading to wxPython version 2.8.12.1 worked for me.
If you want to keep using Boa you might want to look at this fork of it.
https://bitbucket.org/cwt/boa-constructor
Looks pretty active and seems to be running against recent versions of wxPython.
to run the BOA Constructor in Python 2.7, you can use wxPython version 2.8.11.0. or 2.8.12.1
for a more complete solution, you can read it here :
http://sourceforge.net/p/boa-constructor/discussion/5483/thread/e6f45f66/
to download wxpython version above, please go to here :
http://www.lfd.uci.edu/~gohlke/pythonlibs/#wxpython