I realise there are a few questions similar to this but nothing that fully addresses the issue I'm getting.
I'm writing a few alias' for terminal commands I often use.
$ cd ~/Documents/blah/blah/blah
This works as a terminal command, but when I try to turn this into an alias:
alias pie='cd ~/Documents/blah/blah/blah'
This doesn't work, -bash: cd: Documents/blah/blah/blah: No such file or directory
I'm storing the alias in .bashrc in my home directory. I'm using Mac OSX.
Anyone know why it would work as a straight command but not an alias?
Similarly, I use a vagrant machine, and I'd like the chain together two commands: one to ssh to vagrant and the other to open the shell:
alias vshell='vagrant ssh && python manage.py shell
But this doesn't seem possible, it only ever executes the first command, maybe because this takes a little longer to complete?
Thanks
Related
I have a complicated prompt. Very. I use git-bash for windows.
SSH-ing in on gitbash sends me to the CMD prompt. I know to type ssh -t user#host "bash -l" to get a bash prompt. It works, however, I use a repository called gitstatus to speed up the parsing of the git commands, and sshing in using bash -l calls the PS1 set in /c/cygwin/etc/bash.bashrc (for Mintty), NOT ~/bash.bashrc (for GitBash). This initially seems fine, as I can just copy paste the code from the GitBash *.bashrc to cygwin's. However, the gitstatus repository only works on bash terminals, aka not Cygwin/Mintty, so the prompt when I ssh in appears quite slower in git repos (Mintty doesn't allow gitstatus to be sourced and speed up parsing, once again) than if I was not SSH-ed in and using the GitBash-sourced prompt.
Are there any work arounds for this? I have seen many simnilar questions here but none have provided me a solution.
If you're in my situation, just source the scripts (duh). If you can't execute foo in file x when it should do the same thing as bar in file y, just source bar from file x. It seems obvious but took me a moment.
ALSO: Make sure to run dos2unix.exe on admin command prompt to remove carriage returns every time you make a change.
I have a Perl program on server_B which uses Perl DBI and 5.010 and runs fine from the server_B terminal. I run it from a shell script which first prepares some arguments and then passes them to the Perl program, all works fine.
I need to run a shell script on server_A that will execute that script on server_B. This is because the Perl program creates several files that I want to SFTP back over to server_A. This is the script I'm running on server_A:
ssh server_B <<- EOF
perl/update.sh
EOF
There is some strange behavior which I'm trying to understand:
The script (update.sh) on server_B runs mysql, which is not installed on server_A (which is why I have to do this whole thing.) If I try to run it on server_B as-is, I can call mysql just like that. But when I run the above script (on server_A) to ssh into server_B and run that script, it doesn't recognize mysql unless I change the file (on server_B) to call the full path /opt/mysql/client/bin/mysql (even though that file is already on server_B with mysql installed) Does this mean server_B is picking up on the PATH variable from server_A instead of using my PATH variable from server_B? Is it trying to run my programs from server_A on the files on server_B? How and why??
If I make the change above it executes the script, but when it hits Perl it says
Perl v5.10.0- required - this is only v5.8.8
Again, 5.10 works fine on server_B but the version of Perl on server_A is 5.8.8.
So I got rid of use 5.010; because it actually wasn't necessary, but then I have a similar problem with my modules (DBI and DBD::mysql). I get:
Can't locate DBI.pm in #INC (#INC contains.. [my Perl PATH from server_A])
at perlfile.pl line 4
I was expecting the ssh heredoc call to update.sh (from server_A) to run exactly as update.sh does if I call it on server_B, but instead it seems like it's trying to use my programs from server_A on server_B, which I find weird. Can anyone help me understand why it's happening? I feel like I'm misunderstanding something fundamental about how ssh works.
server_A is AIX with ksh
server_B is AIX with bash
Edit - since some of you voted to the effect that I haven't done my research, here's what else I've tried. I didn't mention because I don't understand them fully, these are just guesses based on other SO posts & hunches. It'd be disingenuous if I gave the impression I knew what I was talking about.
If this is a duplicate, which question should I be looking at? If this is a "just read the manual situation", which one? What should I look for?
Read man ssh looking for clues related to environment variables, didn't find anything I understood
Tried running with -t
Tried running with -t -t
Did log in remotely with ssh and manually running it - this DOES work
Sourced my .bash_profile in the update script
Tried to re-assign PATH as the remote server's PATH when ssh
Tried using a different delimiter for the heredoc
Tried < instead of <<
Tried without the "-"
Edit 2 with Saigo's help below I determined that when in interactive ssh, if I echo $PATH I do get the target server's $PATH, but in a shell script I don't. That led me to this:
https://serverfault.com/questions/643333/different-bash-path-variables-when-using-ssh-script-vs-interactive-ssh
where I found out that scripted ssh doesn't call .bashrc, but interactive ssh does. So it looks like I was on the right track trying to source .bash_profile inside the scripted SSH heredoc, just need .bashrc not .bash_profile - however I don't have a .bashrc on the target server. I do have .profile but when I source that, I get an error stating it's for interactive bash sessions only. So now I'm just trying to find whatever file would contain my $PATH variable because it's apparently not .bashrc as there isn't one in there.
Edit 3 - tried hard-coding the PATH variable into a file and sourcing that and even then when I echo $PATH I get the origin server's PATH variable. It is reading the file in correctly, I also assigned another test variable and echoed that as part of the script. I tried sourcing /etc/profile and no luck.
I found a solution that works perfectly. I wasn't able to get it to work with ~/.bashrc, ~/.bash_profile, or ~/.ssh/rc but still not sure why it's not picking up my environment variables even with sourcing these.
Since it works when I manually ssh in and then run the commands one-by-one, I used these arguments to run ssh in a forced interactive login.
ssh server_B bash --login -i "~/perl/update.sh"
See these for more:
https://superuser.com/questions/564926/profile-is-not-loaded-when-using-ssh-ubuntu
https://unix.stackexchange.com/questions/46143/why-bash-unable-to-find-command-even-if-path-is-specified-properly
Hope this is useful for someone in the future. Thank you for your assistance Saigo.
I have Cygwin installed on my Win7 laptop and by editing my Windows path variable I'm able to get Linux commands in my Windows command terminal. My Question is there a way to get colored file output to transfer to the Windows command line?
Through Cygwin I obviously just alias my .bashrc file, but from Googling and checking Cygwin FAQs I can't find any way to reference that file in a Windows prompt. Although 'ls --color=auto' does work, is there a way to alias this through the Windows command line in any way?
#Al G - Yes. I already can use commands by editing my PATH to include the Cygwin /bin directory but I was wondering if there was a way to carryover aliases. However I was able to answer my own question:
Using naitve Windows aliasing via DOSKEY I can create an alias for ls to auto color file types like this:
DOSKEY ls=ls --color=auto
Put the alias in the .bash_profile (create if not present), not in .bashrc.
In my case:
alias ls='ls --color=auto -la'
I tried activating a VirtualEnv through a shell script like the one below but it doesn't seem to work,
#!/bin/sh
source ~/.virtualenvs/pinax-env/bin/activate
I get the following error
$ sh virtualenv_activate.sh
virtualenv_activate.sh: 2: source: not found
but if I enter the same command on terminal it seems to work
$ source ~/.virtualenvs/pinax-env/bin/activate
(pinax-env)gautam#Aspirebuntu:$
So I changed the shell script to
#!/bin/bash
source ~/.virtualenvs/pinax-env/bin/activate
as suggested and used
$ bash virtualenv_activate.sh
gautam#Aspirebuntu:$
to run the script .
That doesn't throw an error but neither does that activate the virtual env
So any suggestion on how to solve this problem ?
PS : I am using Ubuntu 11.04
TLDR
Must run the .sh script with source instead of the script solely
source your-script.sh
and not
your-script.sh
Details
sh is not the same as bash (although some systems simply link sh to bash, so running sh actually runs bash). You can think of sh as a watered down version of bash. One thing that bash has that sh does not is the "source" command. This is why you're getting that error... source runs fine in your bash shell. But when you start your script using sh, you run the script in an shell in a subprocess. Since that script is running in sh, "source" is not found.
The solution is to run the script in bash instead. Change the first line to...
#!/bin/bash
Then run with...
./virtualenv_activate.sh
...or...
/bin/bash virtualenv_activate.sh
Edit:
If you want the activation of the virtualenv to change the shell that you call the script from, you need to use the "source" or "dot operator". This ensures that the script is run in the current shell (and therefore changes the current environment)...
source virtualenv_activate.sh
...or...
. virtualenv_activate.sh
As a side note, this is why virtualenv always says you need to use "source" to run it's activate script.
source is an builtin shell command in bash, and is not available in sh. If i remember correctly then virtual env does a lot of path and environment variables manipulation. Even running it as bash virtualenv_blah.sh wont work since this will simply create the environment inside the sub-shell.
Try . virtualenv_activate.sh or source virtualenv_activate.sh this basically gets the script to run in your current environment and all the environment variables modified by virtualenv's activate will be available.
HTH.
Edit: Here is a link that might help - http://ss64.com/bash/period.html
On Mac OS X your proposals seems not working.
I have done it this way. I'am not very happy with solution, but share it anyway here and hope, that maybe somebody will suggest the better one:
In activate.sh I have
echo 'source /Users/andi/.virtualenvs/data_science/bin/activate'
I give execution permissions by: chmod +x activate.sh
And I execute this way:
`./activate.sh`
Notice that there are paranthesis in form of ASCII code 96 = ` ( Grave accent )
For me best way work as below.
Create start-my-py-software.sh and pest below code
#!/bin/bash
source "/home/snippetbucket.com/source/AIML-Server-CloudPlatform/bin/activate"
python --version
python /home/snippetbucket.com/source/AIML-Server-CloudPlatform/main.py
Give file permission to run like below.
chmod +x start-my-py-software.sh
Now run like below
.start-my-py-software.sh
and that's it, start my python based server or any other code.
ubuntu #18.0
In my case, Ubuntu 16.04, the methods above didn't worked well or it needs much works.
I just made a link of 'activate' script file and copy it to home folder(or $PATH accessible folder) and renamed it simple one like 'actai'.
Then in a terminal, just call 'source actai'. It worked!
I don't know what has happened, but in my Terminal on Mac OSX 10.5 it can no longer find my sudo command, or find command, etc. They are there because if I put /usr/bin/sudo or /usr/bin/find it works fine...
My .bash_login file looks like this:
export PATH="/usr/local/bin:/usr/local/sbin:/usr/local/mysql/bin:/usr/bin$PATH"
My .bash_profile file looks like this:
export PATH="/Library/Frameworks/Python.framework/Versions/Current/bin:/Library/Python/2.5/site-packages/django_trunk/django/bin:/usr/local/mysql/bin:/usr/bin/sudo$PATH"
I'll say now, I don't really know what I'm doing with the Terminal. I'm just a beginner to it all, and I must of done something for the environment variables (is that what they're called?) to be lost. I presumed I'd just have to make sure the /usr/bin/ path is in my bash files, but they are, and it doesn't seem to work. Please help!
Also, when I do use the /usr/bin/find command, it says "Permission denied" to me, even though I am logged into Mac OSX as the System Administrator account. I don't understand.
Any help would be grand. Thank you - James
It looks like both of your PATH exports are malformed:
export PATH="/usr/local/bin:/usr/local/sbin:/usr/local/mysql/bin:/usr/bin$PATH"
The end bit there won't work. It should be:
export PATH=/usr/local/bin:/usr/local/sbin:/usr/local/mysql/bin:/usr/bin:$PATH
Notice the colon before '$PATH'? It's important ;)
Also, the double quotes are not necessary.
If this doesn't work, we will need more information. It is possible that something else is modifying your path even after your shell configurations are loaded.
Can you post the results of:
$ echo $PATH
Configuration files are not always a good indication of the current environment variables, since they are modified by many programs and files, all across your system. To see all of your environment variables, you can run:
$ env
This should fix the problem completely and permanently.
first, export environment paths by using below command in the terminal.
export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
now you have the commands you want. (eg. try ls. You'll see the command is working). But this is only for the current session. If you close the terminal and open a new one, you will have the previous issue. To make this change permanent, use below command,
go to home directory
cd ~
open .bash_profile file in nano / vim (I'm using nano here)
nano .bash_profile
This will open up nano editor. In a new line, paste the following;
export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:$PATH
press 'control'+'o' to save (WriteOut) and 'control'+'x' to exit nano.
All done ! Now try the commands.
Check out --- http://www.sweeting.org/mark/blog/2008/05/26/mac-os-x-tip-setting-path-environment-variables
I went trough the same issue and here is how I solved it.
First of all I reverted the file to its original doing this way
/usr/bin/nano ~/.bash_profile
In my case I was not able to make work any command alias. Even vi or vim didnt work without specifying the full path of that command.
If nano is not installed just replace nano in the command by the editor installed
After that just restart the computer. In my case as I said bellow I could not use any command. When trying to do /usr/bin/source ~/.bash_profile
that command failed. So I had to restart the OS and it worked