Libreoffice PDF conversion command not working on Amazon instance.
I have got the below mentioned scenario. When I am executing same command through root user then its executing on command line but when I am executing same command as Apache user its giving error!!
Executing command with Root user.
/opt/libreoffice/program/soffice --headless --nologo --nofirststartwizard --norestore --convert-to pdf:writer_web_pdf_Export --outdir '/var/www/html/con/var/tmp' '/var/www/html/con/var/tmp/imagick-tmp-5e3a4b08d044d.xls'
Msg after execution above command with root user
/opt/libreoffice/program/soffice.bin: /lib64/libdbus-1.so.3: no version information available (required by /opt/libreoffice/program/libmergedlo.so)
convert /var/www/html/con/var/tmp/imagick-tmp-5e3a4b08d044d.xls -> /var/www/html/con/var/tmp/imagick-tmp-5e3a4b08d044d.pdf using filter : writer_web_pdf_Export
Executing command with Apache user.
-uapache /opt/libreoffice/program/soffice --headless --nologo --nofirststartwizard --norestore --convert-to pdf:writer_web_pdf_Export --outdir '/var/www/html/con/var/tmp' '/var/www/html/con/var/tmp/imagick-tmp-5e3a4b08d044d.xls'
Msg after execution above command with Apache user.
javaldx failed!
Warning: failed to read path from javaldx
/opt/libreoffice/program/soffice.bin: /lib64/libdbus-1.so.3: no version information available (required by /opt/libreoffice/program/libmergedlo.so)
LibreOffice 6.2 - Fatal Error: The application cannot be started.
User installation could not be completed.
I have checked all the installation and permission related things. Everything is fine.
Please help!
Finally I have got the solution, mentioned below.
Actual Command :-
export HOME=/var/www && /usr/bin/soffice --headless --nologo --nofirststartwizard --norestore --convert-to pdf:writer_web_pdf_Export --outdir '/var/www/html/pimcore_root/var/tmp' '/var/www/html/pimcore_root/web/var/assets/demo.xls'
Modified Command :-
export HOME=/var/www && /usr/bin/soffice --headless --nologo --nofirststartwizard --norestore -env:UserInstallation=file:///tmp/LibreOffice_Conversion_${USER} --convert-to pdf:writer_web_pdf_Export --outdir '/var/www/html/pimcore_root/var/tmp' '/var/www/html/pimcore_root/web/var/assets/demo.xls'
In modified command we have added
" -env:UserInstallation=file:///tmpLibreOffice_Conversion_${USER} "
and after that everything is working fine.
Related
In laravel 5.8 app I use https://github.com/spatie/browsershot
and if I save file as
$save_to_file= 'file.pdf';
Browsershot::html(htmlspecialchars_decode($pdf_content))
->showBackground()
->save($save_to_file);
it is downloaded and saved in /public dir of my app at my local OS
If I try to set path to ‘Downloads’ directory of my Kubuntu 18 as
$save_to_file= '/home/currentuser/Downloads/file.pdf';
Browsershot::html(htmlspecialchars_decode($pdf_content))
->showBackground()
->save($save_to_file);
I got error:
Symfony \ Component \ Process \ Exception \ ProcessFailedException
The command "PATH=$PATH:/usr/local/bin NODE_PATH=`npm root -g` node '/mnt/_work_sdb8/wwwroot/lar/votes/vendor/spatie/browsershot/src/../bin/browser.js' '{"url":"file:\/\/\/tmp\/0906513001561868598\/index.html","action":"pdf","options":{"path":"\/home\/serge\/Downloads\/file.pdf","args":[],"viewport":{"width":800,"height":600},"displayHeaderFooter":false,"printBackground":true}}'" failed. Exit Code: 1(General error) Working directory: /mnt/_work_sdb8/wwwroot/lar/votes/public Output: ================ Error Output: ==============
1) If there is a way to download generated file into ‘Downloads’(OS independently) ?
2) I think that I can use php remove function but again how define ‘Downloads’(OS independently) directory ?
I received the exact same error. No idea why I got that. Followed all the steps mentioned in the docs. Tried various resources still could not figure it out.
Finally this worked
$save_to_file= '/var/www/laravel/storage/app/file.pdf';
Browsershot::url('https://www.google.com')
->noSandbox()->format('a4')->save($save_to_file);
The ->noSandbox() was the key. Let me know if this works for you.
Started working on an update to my website. It was working fine the other day but now I get an error.
I generally type on CMD (i'm on Windows 10) "bundle exec Jekyll serve --watch" and the server goes. I can edit and save and its all reflected in browser upon refresh.
Now I can do this, but if I make one change to any file it works. Do another change and I get an error. I have to terminate and type again.
Below is the error:
D:\Tristen Grant\Documents\GitHub\portfolio>bundle exec jekyll serve --watch
DL is deprecated, please use Fiddle
Configuration file: D:/Tristen Grant/Documents/GitHub/portfolio/_config.yml
Source: D:/Tristen Grant/Documents/GitHub/portfolio
Destination: D:/Tristen Grant/Documents/GitHub/portfolio/_site
Incremental build: disabled. Enable with --incremental
Generating...
done in 0.595 seconds.
Auto-regeneration: enabled for 'D:/Tristen Grant/Documents/GitHub/portfolio'
Configuration file: D:/Tristen Grant/Documents/GitHub/portfolio/_config.yml
Server address: http://127.0.0.1:3000//
Server running... press ctrl-c to stop.
Regenerating: 1 file(s) changed at 2016-09-06 16:16:28 ...done in 0.521498 seconds.
Regenerating: 1 file(s) changed at 2016-09-06 16:16:30 ...error:
Error: No such file or directory - git rev-parse HEAD
Error: Run jekyll build --trace for more information.
[2016-09-06 16:19:35] ERROR Errno::ENOTSOCK: An operation was attempted on something that is not a socket.
C:/Ruby21-x64/lib/ruby/2.1.0/webrick/server.rb:170:in `select'
Terminate batch job (Y/N)? y
Terminate batch job (Y/N)? y
I'm using Ruby 2.1.5 64 bit version. RubyDevKit, Sass, Bourbon.
Any ideas how to fix this? I don't know much about Jekyll or ruby. Just starting out.
I also get this error in CMD. You should have github's desktop app installed; try running the same commands from the GitShell you get with that app.
For me that works, it saves me the trouble of installing git globally on Windows and setting it up.
I am facing this error from two days. I'am able to get output from via command line at nagios end
/usr/local/nagios/libexec/check_oracle_health --connect 192.168.2.92:1521/modula --user nagios --password nagios --mode tnsping
Output is
OK - connection established to 192.168.2.92:1521/modula.
But when I am going to GUI mode it is giving me error
CRITICAL - cannot connect to 192.168.2.92:1521/modula.
install_driver(Oracle) failed:
Can't load '/usr/local/lib/perl5/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle:
libocci.so.11.1: cannot open shared object file:
No such file or directory at /usr/lib/perl5/DynaLoader.pm line 200.
at (eval 18) line 3
Compilation failed in require at (eval 18) line 3.
Perhaps a required shared library or dll isn't installed where expected
at /usr/local/nagios/libexec/check_oracle_health line 5837
\n
Plese help me to resolve the error.
I had this issue on CentOS 6 and here is how I resolved it:
`echo "$ORACLE_HOME/lib" >> /etc/ld.so.conf.d/oracle-x86_64.conf && ldconfig`
The answer by Jordan Neufeld is good and may be enough for you (I've tested it on CentOS 7), but I recommend setting these environment variables:
export ORACLE_HOME=/usr/lib/oracle/11.2/client64
export LD_LIBRARY_PATH=/usr/lib/oracle/11.2/client64/lib:$LD_LIBRARY_PATH
export PATH=/usr/lib/oracle/11.2/client64/bin:$PATH
[examples are for oracle-instantclient11.2-basic-11.2 rpm, change path if needed]
I'm trying to configure RHive in the CDH4 environment.
When reading a package 'RHive' in R, the error below got returned.
I'm guessing that's due to wrong homes.
If so, what would be the correct ones?
Or if that's not the reason, what's wrong with that?
Any help would be very appreciated.
Thanks.
> Sys.setenv(HIVE_HOME="/etc/hive")
> Sys.setenv(HADOOP_HOME="/etc/hadoop")
> library(RHive)
Loading required package: rJava
Loading required package: Rserve
This is RHive 0.0-7. For overview type '?RHive'.
HIVE_HOME=/etc/hive
[1] "there is no slaves file of HADOOP. so you should pass hosts argument when you call rhive.connect()."
Error : .onLoad failed in loadNamespace() for 'RHive', details:
call: .jnew("org/apache/hadoop/conf/Configuration")
error: java.lang.ClassNotFoundException
In addition: Warning message:
In file(file, "rt") :
cannot open file '/etc/hadoop/conf/slaves': No such file or directory
Error: package/namespace load failed for 'RHive'
Had the problems but solved it. Downside is that I have to keep track of a bunch of sym links
After struggling with install RHive_0.0-7.tar.gz on CDH 4.7.x and getting:
Warning in file(file, "rt") :
cannot open file '/etc/hadoop/conf/slaves': No such file or directory
[1] "there is no slaves file of HADOOP. so you should pass hosts argument when you call rhive.connect()."
In /etc/hadoop/conf
I added a the following sym link ----> ln -s /opt/cloudera/parcels/CDH-4.4.0-1.cdh4.4.0.p0.39/etc/hadoop/conf.empty/slaves slaves
(why Cloudera CHD 4.7 installs in /opt without creating the proper sym links from /usr/lib is puzzling)
I also defined the followingin /usr/lib64/R/etc/Renviron
## set hive paths
HIVE_HOME='/opt/cloudera/parcels/CDH-4.4.0-1.cdh4.4.0.p0.39/lib/hive'
HADOOP_HOME='/opt/cloudera/parcels/CDH-4.4.0-1.cdh4.4.0.p0.39/lib/hadoop'
LD_LIBRARY_PATH='/opt/cloudera/parcels/CDH-4.4.0-1.cdh4.4.0.p0.39/lib/hadoop'
At a shell prompt I ran R CMD INSTALL RHive_0.0-7.tar.gz
Installation Happiness!!
++++++
Inside R-Studio (server)
>
> library(RHive)
Loading required package: rJava
Loading required package: Rserve
This is RHive 0.0-7. For overview type ‘?RHive’.
HIVE_HOME=/opt/cloudera/parcels/CDH-4.4.0-1.cdh4.4.0.p0.39/lib/hive
call rhive.init() because HIVE_HOME is set.
rhive.init()
>
+++++++
You should set the HADOOP_CONF_DIR separately.
Try export $HADOOP_CONF_DIR=/etc/hadoop/conf/conf.pseudo
The conf.pseudo has the slaves file.
Though I'd be curious to see if you can make RHive work with CDH4.
I am trying to run cellcli on my one of the Exadata Cell Server.
When I login to the Server, I am able to see all the files as expected.
(Like: all_group all_nodelist_group cell_group all_ib_group etc)
When I issue command to start cellcli it gives me error that command not found:
# cellcli
-bash: cellcli: command not found
# which cellcli
which: no cellcli in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
Any idea what is the location of the cellclie executable on exadata?
Do I need to export any other path to get this command?
cellcli is in /opt/oracle/cell/cellsrv/bin. It should be put in path by /etc/profile.d/cell_env.sh
(from Marc Fielding)