Creating Bash Script Filenames Based on C++ Binary Runtime Parameters [duplicate] - bash

The following line in my Bash script
echo $AAAA" "$DDDD" "$MOL_TAG >> ${OUPUT_RESULTS}
gives me this error:
line 46: ${OUPUT_RESULTS}: ambiguous redirect
Why?

Bash can be pretty obtuse sometimes.
The following commands all return different error messages for basically the same error:
$ echo hello >
bash: syntax error near unexpected token `newline`
$ echo hello > ${NONEXISTENT}
bash: ${NONEXISTENT}: ambiguous redirect
$ echo hello > "${NONEXISTENT}"
bash: : No such file or directory
Adding quotes around the variable seems to be a good way to deal with the "ambiguous redirect" message: You tend to get a better message when you've made a typing mistake -- and when the error is due to spaces in the filename, using quotes is the fix.

Do you have a variable named OUPUT_RESULTS or is it the more likely OUTPUT_RESULTS?
michael#isolde:~/junk$ ABC=junk.txt
michael#isolde:~/junk$ echo "Booger" > $ABC
michael#isolde:~/junk$ echo "Booger" >> $ABB
bash: $ABB: ambiguous redirect
michael#isolde:~/junk$

put quotes around your variable. If it happens to have spaces, it will give you "ambiguous redirect" as well. also check your spelling
echo $AAAA" "$DDDD" "$MOL_TAG >> "${OUPUT_RESULTS}"
eg of ambiguous redirect
$ var="file with spaces"
$ echo $AAAA" "$DDDD" "$MOL_TAG >> ${var}
bash: ${var}: ambiguous redirect
$ echo $AAAA" "$DDDD" "$MOL_TAG >> "${var}"
$ cat file\ with\ spaces
aaaa dddd mol_tag

I've recently found that blanks in the name of the redirect file will cause the "ambiguous redirect" message.
For example if you redirect to application$(date +%Y%m%d%k%M%S).log and you specify the wrong formatting characters, the redirect will fail before 10 AM for example. If however, you used application$(date +%Y%m%d%H%M%S).log it would succeed. This is because the %k format yields ' 9' for 9AM where %H yields '09' for 9AM.
echo $(date +%Y%m%d%k%M%S) gives 20140626 95138
echo $(date +%Y%m%d%H%M%S) gives 20140626095138
The erroneous date might give something like:
echo "a" > myapp20140626 95138.log
where the following is what would be desired:
echo "a" > myapp20140626095138.log

Does the path specified in ${OUPUT_RESULTS} contain any whitespace characters? If so, you may want to consider using ... >> "${OUPUT_RESULTS}" (using quotes).
(You may also want to consider renaming your variable to ${OUTPUT_RESULTS})

If your script's redirect contains a variable, and the script body defines that variable in a section enclosed by parenthesis, you will get the "ambiguous redirect" error. Here's a reproducible example:
vim a.sh to create the script
edit script to contain (logit="/home/ubuntu/test.log" && echo "a") >> ${logit}
chmod +x a.sh to make it executable
a.sh
If you do this, you will get "/home/ubuntu/a.sh: line 1: $logit: ambiguous redirect". This is because
"Placing a list of commands between parentheses causes a subshell to
be created, and each of the commands in list to be executed in that
subshell, without removing non-exported variables. Since the list is
executed in a subshell, variable assignments do not remain in effect
after the subshell completes."
From Using parenthesis to group and expand expressions
To correct this, you can modify the script in step 2 to define the variable outside the parenthesis: logit="/home/ubuntu/test.log" && (echo "a") >> $logit

I got this error when trying to use brace expansion to write output to multiple files.
for example: echo "text" > {f1,f2}.txt results in -bash: {f1,f2}.txt: ambiguous redirect
In this case, use tee to output to multiple files:
echo "text" | tee {f1,f2,...,fn}.txt 1>/dev/null
the 1>/dev/null will prevent the text from being written to stdout
If you want to append to the file(s) use tee -a

If you are here trying to debug this "ambiguous redirect" error with GitHub Actions. I highly suggest trying it this way:
echo "MY_VAR=foobar" >> $GITHUB_ENV
The behavior I experienced with $GITHUB_ENV is that, it adds it to the pipeline environment variables as my example shows MY_VAR

I just had this error in a bash script. The issue was an accidental \ at the end of the previous line that was giving an error.

One other thing that can cause "ambiguous redirect" is \t \n \r in the variable name you are writing too
Maybe not \n\r? But err on the side of caution
Try this
echo "a" > ${output_name//[$'\t\n\r']}
I got hit with this one while parsing HTML, Tabs \t at the beginning of the line.

This might be the case too.
you have not specified the file in a variable and redirecting output to it, then bash will throw this error.
files=`ls`
out_file = /path/to/output_file.t
for i in `echo "$files"`;
do
content=`cat $i`
echo "${content} ${i}" >> ${out_file}
done
out_file variable is not set up correctly so keep an eye on this too.
BTW this code is printing all the content and its filename on the console.

if you are using a variable name in the shell command, you must concatenate it with + sign.
for example :
if you have two files, and you are not going to hard code the file name, instead you want to use the variable name
"input.txt" = x
"output.txt" = y
then ('shell command within quotes' + x > + y)
it will work this way especially if you are using this inside a python program with os.system command probably

In my case, this was a helpful warning, because the target variable (not the file) was misspelled and did not exist.
echo "ja" >> $doesNotExist
resulting in
./howdy.sh: line 4: $doesNotExist: ambiguous redirect

For my case, if I specify the output file via a env (e.g $ENV_OF_LOG_FILE), then will get the error ambiguous redirect.
But, if I use plain text as file path (e.g /path/to/log_file), then there is no error.

Related

Bash script - stdout file descriptor?

I have the following in my script:
OUTFILE=./output.log
echo "foo" >> ${OUTFILE}
It works just fine when OUTFILE is an actual file path. However, sometimes I'd like to see the output on stdout by modifying OUTFILE but it doesn't work. I tried with 1 and &1, both quoted and unquoted, as well as leaving it empty.
It just keeps telling me this:
./foo.sh: line 2: ${OUTFILE}: ambiguous redirect
Use /dev/stdout as your filename for this. (See the Portability of “> /dev/stdout”.)
You can't use &1 in the variable because of parsing order issues. The redirection tokens are searched for before variable expansion is performed. So when you use:
$ o='&1'
$ echo >$o
the shell scans for redirection operators and sees the > redirection operator and not the >& operator. (And there isn't a >>& operator to begin with anyway so your appending example wouldn't work regardless. Though newer versions of bash do have an &>> operator for >> file 2>&1 use.)
Im guessing you want to do one of these
Print to file
OUTFILE=./output.log
echo "foo" >> "${OUTFILE}"
Print to stdout
OUTFILE=/dev/stdout
echo "foo" >> "${OUTFILE}"
or just
echo "foo"
Print to file and stdout
OUTFILE=./output.log
echo "foo" | tee "${OUTFILE}"

Shell Script Variable Scope with commnd

I came across an interesting thing in Shell Scripting and not 100% sure why the behaviour is like this
I tried the below script:
#!/bin/sh
CMD="curl -XGET http://../endpoint";
var1=eval $CMD | sed -e 's/find/replace/g';
echo $var1; # Output: printed the value on this line
echo $var1; # Output: blank/no data printed (Why it is blank?)
I had to change the command in variable enclosing with back-tick ` to print the variable as many time as I wanted.
CMD="curl -XGET http://../endpoint";
var1=`eval $CMD | sed -e 's/find/replace/g'`;
echo $var1; # Output: printed the value on this line
echo $var1; # Output: printed the value on this line
Why I have to surround my command with ` to assign it's o/p to the variable in subsequent variable usage?
I have a feeling that it has something to do with the variable-command scope.
Shedding light on my understanding will be appreciated!
UPDATE:
I tried the below command and it is working in my env.
#!/bin/sh
CMD="curl -XGET http://www.google.com/";
var1=eval $CMD | sed -e 's/find/replace/g';
echo $var1; # Output: printed the value on this line
echo "######";
echo $var1; # Output: blank/no data printed (Why it is blank?)
sh/bash allows you to run a command with a variable in its environment, without permanently modifying the variable in the shell. This is great, because you can e.g. run a command in a certain language just one time without having to change your entire user's or system's language:
$ LC_ALL=en_US.utf8 ls foo
ls: cannot access foo: No such file or directory
$ LC_ALL=nb_NO.utf8 ls foo
ls: cannot access foo: Ingen slik fil eller filkatalog
However, this means that when you try to do
var=this is some command
you're trigger this syntax.
It means "run the command is a command and tell it that the variable var is set to this"
It does not assign "this is my string" to the variable, and it definitely does not evaluate "this is a string" as a command, and then assign its output to var.
Given this, we can look at what actually happened:
CMD="curl -XGET http://../endpoint";
var1=eval $CMD | sed -e 's/find/replace/g'; # No assignment, output to screen
echo $var1; # Output: blank/no data printed
echo $var1; # Output: blank/no data printed
There is no scope issue and no inconsistency: the variable is never assigned, and is never written by an echo statement.
var=`some command` (or preferably, var=$(some command)) works because this is valid syntax to assign output from a program to a variable.
The first example isn't doing what you think it is.
Neither echo is printing anything. Make them echo "[$var1]" to see that.
You need the backticks to run the command and capture its output.
Your first attempt was running the $CMD | sed -e 's/find/replace/g'; pipeline with the environment of $CMD containing var1 set to a value of eval.
You also shouldn't be putting commands inside strings (or using eval in general). See http://mywiki.wooledge.org/BashFAQ/001 for more on why.

Store command to file

I'd like to create a script A which creates a script B. Script B creates a directory. So I created a file with this content, grant x permission to it, then execute it. Unfortunately it doesn't run as I expect. It makes directory first then create an empty file. Why?
#!/bin/bash
batch=`mkdir /home/hieund/bpl`
echo $batch > newfile
Update:
After trying your solution, I have:
#!/bin/bash
$myPath=$HOME/bpl
batch='mkdir ' $myPath
echo $batch > newfile
It doesn't work as well. Same unexpected behavior.
Update:
#!/bin/bash
$myPath=$HOME/bpl
batch="mkdir $myPath"
echo $batch > newfile
It doesn't work too. Same unexpected behavior.
bash: /home/hieund/bpl=/home/hieund/bpl: No such file or directory
It makes a directory at the moment of assignment, because you said this with "command substitution"
batch=`mkdir /home/hieund/bpl`
The flow of execution
mkdir /home/... - creates the directory - because of backticks - command substitution
the mkdir returns nothing, therefore
the assignment is like batch= (it assigns nothing)
the echo $batch echoes the "nothing" so: echo > newfile
you should to use
batch='mkdir /home/hieund/bpl'
for embedding variable use double quotes
batch="mkdir $myPath"
You always can use the bash -x script - to show what is executing. E.g. having a script myscript.sh
#!/bin/bash
MYDIR="./somedir"
batch="mkdir $MYDIR"
echo "$batch" > newfile
the command
bash -x myscript.sh
will show the execution of command and arguments. (note, not shown redirections)
+ MYDIR=./somedir
+ batch='mkdir ./somedir'
+ echo 'mkdir ./somedir'
One comment: You should generally assign things to variables with double quotes, because you can avoid problems with spaces. Note
myvar=$VAR/some
and
myvar="$VAR/some"
makes a big difference when the $VAR contains spaces.
Because backticks are not used for strings.
batch="mkdir /home/hieund/bpl"

Echo newline in Bash prints literal \n

How do I print a newline? This merely prints \n:
$ echo -e "Hello,\nWorld!"
Hello,\nWorld!
Use printf instead:
printf "hello\nworld\n"
printf behaves more consistently across different environments than echo.
Make sure you are in Bash.
$ echo $0
bash
All these four ways work for me:
echo -e "Hello\nworld"
echo -e 'Hello\nworld'
echo Hello$'\n'world
echo Hello ; echo world
echo $'hello\nworld'
prints
hello
world
$'' strings use ANSI C Quoting:
Words of the form $'string' are treated specially. The word expands to string, with backslash-escaped characters replaced as specified by the ANSI C standard.
You could always do echo "".
For example,
echo "Hello,"
echo ""
echo "World!"
On the off chance that someone finds themselves beating their head against the wall trying to figure out why a coworker's script won't print newlines, look out for this:
#!/bin/bash
function GET_RECORDS()
{
echo -e "starting\n the process";
}
echo $(GET_RECORDS);
As in the above, the actual running of the method may itself be wrapped in an echo which supersedes any echos that may be in the method itself. Obviously, I watered this down for brevity. It was not so easy to spot!
You can then inform your comrades that a better way to execute functions would be like so:
#!/bin/bash
function GET_RECORDS()
{
echo -e "starting\n the process";
}
GET_RECORDS;
Simply type
echo
to get a new line
POSIX 7 on echo
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/echo.html
-e is not defined and backslashes are implementation defined:
If the first operand is -n, or if any of the operands contain a <backslash> character, the results are implementation-defined.
unless you have an optional XSI extension.
So I recommend that you should use printf instead, which is well specified:
format operand shall be used as the format string described in XBD File Format Notation [...]
the File Format Notation:
\n <newline> Move the printing position to the start of the next line.
Also keep in mind that Ubuntu 15.10 and most distros implement echo both as:
a Bash built-in: help echo
a standalone executable: which echo
which can lead to some confusion.
str='hello\nworld'
$ echo | sed "i$str"
hello
world
You can also do:
echo "hello
world"
This works both inside a script and from the command line.
On the command line, press Shift+Enter to do the line break inside the string.
This works for me on my macOS and my Ubuntu 18.04 (Bionic Beaver) system.
For only the question asked (not special characters etc) changing only double quotes to single quotes.
echo -e 'Hello,\nWorld!'
Results in:
Hello,
World!
There is a new parameter expansion added in Bash 4.4 that interprets escape sequences:
${parameter#operator} - E operator
The expansion is a string that is the value of parameter with
backslash escape sequences expanded as with the $'…' quoting
mechanism.
$ foo='hello\nworld'
$ echo "${foo#E}"
hello
world
I just use echo without any arguments:
echo "Hello"
echo
echo "World"
To print a new line with echo, use:
echo
or
echo -e '\n'
This could better be done as
x="\n"
echo -ne $x
-e option will interpret backslahes for the escape sequence
-n option will remove the trailing newline in the output
PS: the command echo has an effect of always including a trailing newline in the output so -n is required to turn that thing off (and make it less confusing)
My script:
echo "WARNINGS: $warningsFound WARNINGS FOUND:\n$warningStrings
Output:
WARNING : 2 WARNINGS FOUND:\nWarning, found the following local orphaned signature file:
On my Bash script I was getting mad as you until I've just tried:
echo "WARNING : $warningsFound WARNINGS FOUND:
$warningStrings"
Just hit Enter where you want to insert that jump. The output now is:
WARNING : 2 WARNINGS FOUND:
Warning, found the following local orphaned signature file:
If you're writing scripts and will be echoing newlines as part of other messages several times, a nice cross-platform solution is to put a literal newline in a variable like so:
newline='
'
echo "first line${newline}second line"
echo "Error: example error message n${newline}${usage}" >&2 #requires usage to be defined
If the previous answers don't work, and there is a need to get a return value from their function:
function foo()
{
local v="Dimi";
local s="";
.....
s+="Some message here $v $1\n"
.....
echo $s
}
r=$(foo "my message");
echo -e $r;
Only this trick worked on a Linux system I was working on with this Bash version:
GNU bash, version 2.2.25(1)-release (x86_64-redhat-linux-gnu)
You could also use echo with braces,
$ (echo hello; echo world)
hello
world
This got me there....
outstuff=RESOURCE_GROUP=[$RESOURCE_GROUP]\\nAKS_CLUSTER_NAME=[$AKS_CLUSTER_NAME]\\nREGION_NAME=[$REGION_NAME]\\nVERSION=[$VERSION]\\nSUBNET-ID=[$SUBNET_ID]
printf $outstuff
Yields:
RESOURCE_GROUP=[akswork-rg]
AKS_CLUSTER_NAME=[aksworkshop-804]
REGION_NAME=[eastus]
VERSION=[1.16.7]
SUBNET-ID=[/subscriptions/{subidhere}/resourceGroups/makeakswork-rg/providers/Microsoft.Network/virtualNetworks/aks-vnet/subnets/aks-subnet]
Sometimes you can pass multiple strings separated by a space and it will be interpreted as \n.
For example when using a shell script for multi-line notifcations:
#!/bin/bash
notify-send 'notification success' 'another line' 'time now '`date +"%s"`
With jq:
$ jq -nr '"Hello,\nWorld"'
Hello,
World
Additional solution:
In cases, you have to echo a multiline of the long contents (such as code/ configurations)
For example:
A Bash script to generate codes/ configurations
echo -e,
printf might have some limitation
You can use some special char as a placeholder as a line break (such as ~) and replace it after the file was created using tr:
echo ${content} | tr '~' '\n' > $targetFile
It needs to invoke another program (tr) which should be fine, IMO.

Getting an "ambiguous redirect" error

The following line in my Bash script
echo $AAAA" "$DDDD" "$MOL_TAG >> ${OUPUT_RESULTS}
gives me this error:
line 46: ${OUPUT_RESULTS}: ambiguous redirect
Why?
Bash can be pretty obtuse sometimes.
The following commands all return different error messages for basically the same error:
$ echo hello >
bash: syntax error near unexpected token `newline`
$ echo hello > ${NONEXISTENT}
bash: ${NONEXISTENT}: ambiguous redirect
$ echo hello > "${NONEXISTENT}"
bash: : No such file or directory
Adding quotes around the variable seems to be a good way to deal with the "ambiguous redirect" message: You tend to get a better message when you've made a typing mistake -- and when the error is due to spaces in the filename, using quotes is the fix.
Do you have a variable named OUPUT_RESULTS or is it the more likely OUTPUT_RESULTS?
michael#isolde:~/junk$ ABC=junk.txt
michael#isolde:~/junk$ echo "Booger" > $ABC
michael#isolde:~/junk$ echo "Booger" >> $ABB
bash: $ABB: ambiguous redirect
michael#isolde:~/junk$
put quotes around your variable. If it happens to have spaces, it will give you "ambiguous redirect" as well. also check your spelling
echo $AAAA" "$DDDD" "$MOL_TAG >> "${OUPUT_RESULTS}"
eg of ambiguous redirect
$ var="file with spaces"
$ echo $AAAA" "$DDDD" "$MOL_TAG >> ${var}
bash: ${var}: ambiguous redirect
$ echo $AAAA" "$DDDD" "$MOL_TAG >> "${var}"
$ cat file\ with\ spaces
aaaa dddd mol_tag
I've recently found that blanks in the name of the redirect file will cause the "ambiguous redirect" message.
For example if you redirect to application$(date +%Y%m%d%k%M%S).log and you specify the wrong formatting characters, the redirect will fail before 10 AM for example. If however, you used application$(date +%Y%m%d%H%M%S).log it would succeed. This is because the %k format yields ' 9' for 9AM where %H yields '09' for 9AM.
echo $(date +%Y%m%d%k%M%S) gives 20140626 95138
echo $(date +%Y%m%d%H%M%S) gives 20140626095138
The erroneous date might give something like:
echo "a" > myapp20140626 95138.log
where the following is what would be desired:
echo "a" > myapp20140626095138.log
Does the path specified in ${OUPUT_RESULTS} contain any whitespace characters? If so, you may want to consider using ... >> "${OUPUT_RESULTS}" (using quotes).
(You may also want to consider renaming your variable to ${OUTPUT_RESULTS})
If your script's redirect contains a variable, and the script body defines that variable in a section enclosed by parenthesis, you will get the "ambiguous redirect" error. Here's a reproducible example:
vim a.sh to create the script
edit script to contain (logit="/home/ubuntu/test.log" && echo "a") >> ${logit}
chmod +x a.sh to make it executable
a.sh
If you do this, you will get "/home/ubuntu/a.sh: line 1: $logit: ambiguous redirect". This is because
"Placing a list of commands between parentheses causes a subshell to
be created, and each of the commands in list to be executed in that
subshell, without removing non-exported variables. Since the list is
executed in a subshell, variable assignments do not remain in effect
after the subshell completes."
From Using parenthesis to group and expand expressions
To correct this, you can modify the script in step 2 to define the variable outside the parenthesis: logit="/home/ubuntu/test.log" && (echo "a") >> $logit
I got this error when trying to use brace expansion to write output to multiple files.
for example: echo "text" > {f1,f2}.txt results in -bash: {f1,f2}.txt: ambiguous redirect
In this case, use tee to output to multiple files:
echo "text" | tee {f1,f2,...,fn}.txt 1>/dev/null
the 1>/dev/null will prevent the text from being written to stdout
If you want to append to the file(s) use tee -a
If you are here trying to debug this "ambiguous redirect" error with GitHub Actions. I highly suggest trying it this way:
echo "MY_VAR=foobar" >> $GITHUB_ENV
The behavior I experienced with $GITHUB_ENV is that, it adds it to the pipeline environment variables as my example shows MY_VAR
I just had this error in a bash script. The issue was an accidental \ at the end of the previous line that was giving an error.
One other thing that can cause "ambiguous redirect" is \t \n \r in the variable name you are writing too
Maybe not \n\r? But err on the side of caution
Try this
echo "a" > ${output_name//[$'\t\n\r']}
I got hit with this one while parsing HTML, Tabs \t at the beginning of the line.
This might be the case too.
you have not specified the file in a variable and redirecting output to it, then bash will throw this error.
files=`ls`
out_file = /path/to/output_file.t
for i in `echo "$files"`;
do
content=`cat $i`
echo "${content} ${i}" >> ${out_file}
done
out_file variable is not set up correctly so keep an eye on this too.
BTW this code is printing all the content and its filename on the console.
if you are using a variable name in the shell command, you must concatenate it with + sign.
for example :
if you have two files, and you are not going to hard code the file name, instead you want to use the variable name
"input.txt" = x
"output.txt" = y
then ('shell command within quotes' + x > + y)
it will work this way especially if you are using this inside a python program with os.system command probably
In my case, this was a helpful warning, because the target variable (not the file) was misspelled and did not exist.
echo "ja" >> $doesNotExist
resulting in
./howdy.sh: line 4: $doesNotExist: ambiguous redirect
For my case, if I specify the output file via a env (e.g $ENV_OF_LOG_FILE), then will get the error ambiguous redirect.
But, if I use plain text as file path (e.g /path/to/log_file), then there is no error.

Resources