I am trying to run a container which runs an automated build. Here is the dockerfile:
FROM ubuntu:14.04
MAINTAINER pmandayam
# update dpkg repositories
RUN apt-get update
# install wget
RUN apt-get install -y wget
# get maven 3.2.2
RUN wget --no-verbose -O /tmp/apache-maven-3.2.2.tar.gz http://archive.apache.or
g/dist/maven/maven-3/3.2.2/binaries/apache-maven-3.2.2-bin.tar.gz
# verify checksum
RUN echo "87e5cc81bc4ab9b83986b3e77e6b3095 /tmp/apache-maven-3.2.2.tar.gz" | md5
sum -c
# install maven
RUN tar xzf /tmp/apache-maven-3.2.2.tar.gz -C /opt/
RUN ln -s /opt/apache-maven-3.2.2 /opt/maven
RUN ln -s /opt/maven/bin/mvn /usr/local/bin
RUN rm -f /tmp/apache-maven-3.2.2.tar.gz
ENV MAVEN_HOME /opt/maven
# remove download archive files
RUN apt-get clean
# set shell variables for java installation
ENV java_version 1.8.0_11
ENV filename jdk-8u11-linux-x64.tar.gz
ENV downloadlink http://download.oracle.com/otn-pub/java/jdk/8u11-b12/$filename
# download java, accepting the license agreement
RUN wget --no-cookies --header "Cookie: oraclelicense=accept-securebackup-cookie
" -O /tmp/$filename $downloadlink
# unpack java
RUN mkdir /opt/java-oracle && tar -zxf /tmp/$filename -C /opt/java-oracle/
ENV JAVA_HOME /opt/java-oracle/jdk$java_version
ENV PATH $JAVA_HOME/bin:$PATH
# configure symbolic links for the java and javac executables
RUN update-alternatives --install /usr/bin/java java $JAVA_HOME/bin/java 20000 &
& update-alternatives --install /usr/bin/javac javac $JAVA_HOME/bin/javac 20000
# install mongodb
RUN echo 'deb http://downloads-distro.mongodb.org/repo/ubuntu-upstart dist 10gen
' | sudo tee /etc/apt/sources.list.d/mongodb.list && \
apt-get update && \
apt-get --allow-unauthenticated install -y mongodb-org mongodb-org-s
erver mongodb-org-shell mongodb-org-mongos mongodb-org-tools && \
echo "mongodb-org hold" | dpkg --set-selections && \
echo "mongodb-org-server hold" | dpkg --set-selections && \
echo "mongodb-org-shell hold" | dpkg --set-selections &&
\
echo "mongodb-org-mongos hold" | dpkg --set-selectio
ns && \
echo "mongodb-org-tools hold" | dpkg --set-selec
tions
RUN mkdir -p /data/db
VOLUME /data/db
EXPOSE 27017
COPY build-script /build-script
CMD ["/build-script"]
I can build the image successfully but when I try to run the container I get this error:
$ docker run mybuild
no such file or directory
Error response from daemon: Cannot start container 3e8aa828909afcd8fb82b5a5ac894
97a537bef2b930b71a5d20a1b98d6cc1dd6: [8] System error: no such file or directory
what does it mean 'no such file or directory'?
Here is my simple script:
#!/bin/bash
sudo service mongod start
mvn clean verify
sudo service mongod stop
I copy it like this: COPY build-script /build-script
and run it like this: CMD ["/build-script"] not sure why its not working
Using service isn't going to fly - the Docker base images are minimal and don't support this. If you want to run multiple processes, you can use supervisor or runit etc.
In this case, it would be simplest just to start mongo manually in the script e.g. /usr/bin/mongod & or whatever the correct incantation is.
BTW the lines where you try to clean up don't have much effect:
RUN rm -f /tmp/apache-maven-3.2.2.tar.gz
...
# remove download archive files
RUN apt-get clean
These files have already been committed to a previous image layer, so doing this doesn't save any disk-space. Instead you have to delete the files in the same Dockerfile instruction in which they're added.
Also, I would consider changing the base image to a Java one, which would save a lot of work. However, you may have trouble finding one which bundles the official Oracle JDK rather than OpenJDK if that's a problem.
I have a docker volume set up in a gcc container. I need to compile the code and give it some stdin through a text file. I'm able to do that using the following command.
docker run \
-v /home/usr/workspace/proj/WebContent/files:/mycode \
gcc:4.9 \
sh -c 'cd mycode; gcc -o myapp ./mycode.c; ./myapp < ./test.txt'
now my question is, I need to make a separate folder for each of my users with their username, but the text.txt stays in the same folder as above. How do I give them their own paths. because right now i get an error that test.txt is not found, and of course it wouldn't. I tried making a separate volume for the test.txt but I guess making two volumes in one container isn't possible or I'm doing it wrong.
What I've tried (please don't judge, i'm just learning :P)
docker run \
-v /home/usr/workspace/proj/WebContent/file/username:/mycode \
-v /home/usr/workspace/proj/WebContent/file/:/tst \
gcc:4.9 \
sh -c 'cd mycode; gcc -o myapp ./mycode.c; cd tst; ./myapp < ./test.txt'
Have a close look at this command:
sh -c 'cd mycode; gcc -o myapp ./mycode.c; cd tst; ./myapp < ./test.txt'
Because you first cd mycode and then cd tst inside the same shell, you're trying to cd mycode/tst, whereas your mount is at /tst.
Similarly, myapp is in /mycode, not in tst, so you can't run ./myapp inside the tst directory and expect it to work.
Instead:
sh -xc 'cd /mycode && gcc -o myapp ./mycode.c && cd /tst && /mycode/myapp < ./test.txt'
Is it possible to generate a Dockerfile from an image? I want to know for two reasons:
I can download images from the repository but would like to see the recipe that generated them.
I like the idea of saving snapshots, but once I am done it would be nice to have a structured format to review what was done.
How to generate or reverse a Dockerfile from an image?
You can. Mostly.
Notes: It does not generate a Dockerfile that you can use directly with docker build; the output is just for your reference.
alias dfimage="docker run -v /var/run/docker.sock:/var/run/docker.sock --rm alpine/dfimage"
dfimage -sV=1.36 nginx:latest
It will pull the target docker image automatically and export Dockerfile. Parameter -sV=1.36 is not always required.
Reference: https://hub.docker.com/r/alpine/dfimage
Now hub.docker.com shows the image layers with detail commands directly, if you choose a particular tag.
Bonus
If you want to know which files are changed in each layer
alias dive="docker run -ti --rm -v /var/run/docker.sock:/var/run/docker.sock wagoodman/dive"
dive nginx:latest
On the left, you see each layer's command, on the right (jump with tab), the yellow line is the folder that some files are changed in that layer
(Use SPACE to collapse dir)
Old answer
below is the old answer, it doesn't work any more.
$ docker pull centurylink/dockerfile-from-image
$ alias dfimage="docker run -v /var/run/docker.sock:/var/run/docker.sock --rm centurylink/dockerfile-from-image"
$ dfimage --help
Usage: dockerfile-from-image.rb [options] <image_id>
-f, --full-tree Generate Dockerfile for all parent layers
-h, --help Show this message
To understand how a docker image was built, use the
docker history --no-trunc command.
You can build a docker file from an image, but it will not contain everything you would want to fully understand how the image was generated. Reasonably what you can extract is the MAINTAINER, ENV, EXPOSE, VOLUME, WORKDIR, ENTRYPOINT, CMD, and ONBUILD parts of the dockerfile.
The following script should work for you:
#!/bin/bash
docker history --no-trunc "$1" | \
sed -n -e 's,.*/bin/sh -c #(nop) \(MAINTAINER .*[^ ]\) *0 B,\1,p' | \
head -1
docker inspect --format='{{range $e := .Config.Env}}
ENV {{$e}}
{{end}}{{range $e,$v := .Config.ExposedPorts}}
EXPOSE {{$e}}
{{end}}{{range $e,$v := .Config.Volumes}}
VOLUME {{$e}}
{{end}}{{with .Config.User}}USER {{.}}{{end}}
{{with .Config.WorkingDir}}WORKDIR {{.}}{{end}}
{{with .Config.Entrypoint}}ENTRYPOINT {{json .}}{{end}}
{{with .Config.Cmd}}CMD {{json .}}{{end}}
{{with .Config.OnBuild}}ONBUILD {{json .}}{{end}}' "$1"
I use this as part of a script to rebuild running containers as images:
https://github.com/docbill/docker-scripts/blob/master/docker-rebase
The Dockerfile is mainly useful if you want to be able to repackage an image.
The thing to keep in mind, is a docker image can actually just be the tar backup of a real or virtual machine. I have made several docker images this way. Even the build history shows me importing a huge tar file as the first step in creating the image...
I somehow absolutely missed the actual command in the accepted answer, so here it is again, bit more visible in its own paragraph, to see how many people are like me
$ docker history --no-trunc <IMAGE_ID>
A bash solution :
docker history --no-trunc $argv | tac | tr -s ' ' | cut -d " " -f 5- | sed 's,^/bin/sh -c #(nop) ,,g' | sed 's,^/bin/sh -c,RUN,g' | sed 's, && ,\n & ,g' | sed 's,\s*[0-9]*[\.]*[0-9]*\s*[kMG]*B\s*$,,g' | head -n -1
Step by step explanations:
tac : reverse the file
tr -s ' ' trim multiple whitespaces into 1
cut -d " " -f 5- remove the first fields (until X months/years ago)
sed 's,^/bin/sh -c #(nop) ,,g' remove /bin/sh calls for ENV,LABEL...
sed 's,^/bin/sh -c,RUN,g' remove /bin/sh calls for RUN
sed 's, && ,\n & ,g' pretty print multi command lines following Docker best practices
sed 's,\s*[0-9]*[\.]*[0-9]*\s*[kMG]*B\s*$,,g' remove layer size information
head -n -1 remove last line ("SIZE COMMENT" in this case)
Example:
~ dih ubuntu:18.04
ADD file:28c0771e44ff530dba3f237024acc38e8ec9293d60f0e44c8c78536c12f13a0b in /
RUN set -xe
&& echo '#!/bin/sh' > /usr/sbin/policy-rc.d
&& echo 'exit 101' >> /usr/sbin/policy-rc.d
&& chmod +x /usr/sbin/policy-rc.d
&& dpkg-divert --local --rename --add /sbin/initctl
&& cp -a /usr/sbin/policy-rc.d /sbin/initctl
&& sed -i 's/^exit.*/exit 0/' /sbin/initctl
&& echo 'force-unsafe-io' > /etc/dpkg/dpkg.cfg.d/docker-apt-speedup
&& echo 'DPkg::Post-Invoke { "rm -f /var/cache/apt/archives/*.deb /var/cache/apt/archives/partial/*.deb /var/cache/apt/*.bin || true"; };' > /etc/apt/apt.conf.d/docker-clean
&& echo 'APT::Update::Post-Invoke { "rm -f /var/cache/apt/archives/*.deb /var/cache/apt/archives/partial/*.deb /var/cache/apt/*.bin || true"; };' >> /etc/apt/apt.conf.d/docker-clean
&& echo 'Dir::Cache::pkgcache ""; Dir::Cache::srcpkgcache "";' >> /etc/apt/apt.conf.d/docker-clean
&& echo 'Acquire::Languages "none";' > /etc/apt/apt.conf.d/docker-no-languages
&& echo 'Acquire::GzipIndexes "true"; Acquire::CompressionTypes::Order:: "gz";' > /etc/apt/apt.conf.d/docker-gzip-indexes
&& echo 'Apt::AutoRemove::SuggestsImportant "false";' > /etc/apt/apt.conf.d/docker-autoremove-suggests
RUN rm -rf /var/lib/apt/lists/*
RUN sed -i 's/^#\s*\(deb.*universe\)$/\1/g' /etc/apt/sources.list
RUN mkdir -p /run/systemd
&& echo 'docker' > /run/systemd/container
CMD ["/bin/bash"]
Update Dec 2018 to BMW's answer
chenzj/dfimage - as described on hub.docker.com regenerates Dockerfile from other images. So you can use it as follows:
docker pull chenzj/dfimage
alias dfimage="docker run -v /var/run/docker.sock:/var/run/docker.sock --rm chenzj/dfimage"
dfimage IMAGE_ID > Dockerfile
This is derived from #fallino's answer, with some adjustments and simplifications by using the output format option for docker history. Since macOS and Gnu/Linux have different command-line utilities, a different version is necessary for Mac. If you only need one or the other, you can just use those lines.
#!/bin/bash
case "$OSTYPE" in
linux*)
docker history --no-trunc --format "{{.CreatedBy}}" $1 | # extract information from layers
tac | # reverse the file
sed 's,^\(|3.*\)\?/bin/\(ba\)\?sh -c,RUN,' | # change /bin/(ba)?sh calls to RUN
sed 's,^RUN #(nop) *,,' | # remove RUN #(nop) calls for ENV,LABEL...
sed 's, *&& *, \\\n \&\& ,g' # pretty print multi command lines following Docker best practices
;;
darwin*)
docker history --no-trunc --format "{{.CreatedBy}}" $1 | # extract information from layers
tail -r | # reverse the file
sed -E 's,^(\|3.*)?/bin/(ba)?sh -c,RUN,' | # change /bin/(ba)?sh calls to RUN
sed 's,^RUN #(nop) *,,' | # remove RUN #(nop) calls for ENV,LABEL...
sed $'s, *&& *, \\\ \\\n \&\& ,g' # pretty print multi command lines following Docker best practices
;;
*)
echo "unknown OSTYPE: $OSTYPE"
;;
esac
It is not possible at this point (unless the author of the image explicitly included the Dockerfile).
However, it is definitely something useful! There are two things that will help to obtain this feature.
Trusted builds (detailed in this docker-dev discussion
More detailed metadata in the successive images produced by the build process. In the long run, the metadata should indicate which build command produced the image, which means that it will be possible to reconstruct the Dockerfile from a sequence of images.
If you are interested in an image that is in the Docker hub registry and wanted to take a look at Dockerfile?.
Example:
If you want to see the Dockerfile of image "jupyter/datascience-notebook" type the word "Dockerfile" in the address bar of your browser as shown below.
https://hub.docker.com/r/jupyter/datascience-notebook/
https://hub.docker.com/r/jupyter/datascience-notebook/Dockerfile
Note:
Not all the images have Dockerfile, for example, https://hub.docker.com/r/redislabs/redisinsight/Dockerfile
Sometimes this way is much faster than searching for Dockerfile in Github.
docker pull chenzj/dfimage
alias dfimage="docker run -v /var/run/docker.sock:/var/run/docker.sock --rm chenzj/dfimage"
dfimage image_id
Below is the output of the dfimage command:
$ dfimage 0f1947a021ce
FROM node:8
WORKDIR /usr/src/app
COPY file:e76d2e84545dedbe901b7b7b0c8d2c9733baa07cc821054efec48f623e29218c in ./
RUN /bin/sh -c npm install
COPY dir:a89a4894689a38cbf3895fdc0870878272bb9e09268149a87a6974a274b2184a in .
EXPOSE 8080
CMD ["npm" "start"]
it is possible in just two step. First pull the image then run docker history command. also, shown in SS.
docker pull kalilinux/kali-rolling
docker history --format "{{.CreatedBy}}" kalilinux/kali-rolling --no-trunc
What is image2df
image2df is tool for Generate Dockerfile by an image.
This tool is very useful when you only have docker image and need to generate a Dockerfile whit it.
How does it work
Reverse parsing by history information of an image.
How to use this image
# Command alias
echo "alias image2df='docker run -v /var/run/docker.sock:/var/run/docker.sock --rm cucker/image2df'" >> ~/.bashrc
. ~/.bashrc
# Excute command
image2df <IMAGE>
See help
docker run --rm cucker/image2df --help
For example
$ echo "alias image2df='docker run -v /var/run/docker.sock:/var/run/docker.sock --rm cucker/image2df'" >> ~/.bashrc
$ . ~/.bashrc
$ docker pull mysql
$ image2df mysql
========== Dockerfile ==========
FROM mysql:latest
RUN groupadd -r mysql && useradd -r -g mysql mysql
RUN apt-get update && apt-get install -y --no-install-recommends gnupg dirmngr && rm -rf /var/lib/apt/lists/*
ENV GOSU_VERSION=1.12
RUN set -eux; \
savedAptMark="$(apt-mark showmanual)"; \
apt-get update; \
apt-get install -y --no-install-recommends ca-certificates wget; \
rm -rf /var/lib/apt/lists/*; \
dpkgArch="$(dpkg --print-architecture | awk -F- '{ print $NF }')"; \
wget -O /usr/local/bin/gosu "https://github.com/tianon/gosu/releases/download/$GOSU_VERSION/gosu-$dpkgArch"; \
wget -O /usr/local/bin/gosu.asc "https://github.com/tianon/gosu/releases/download/$GOSU_VERSION/gosu-$dpkgArch.asc"; \
export GNUPGHOME="$(mktemp -d)"; \
gpg --batch --keyserver hkps://keys.openpgp.org --recv-keys B42F6819007F00F88E364FD4036A9C25BF357DD4; \
gpg --batch --verify /usr/local/bin/gosu.asc /usr/local/bin/gosu; \
gpgconf --kill all; \
rm -rf "$GNUPGHOME" /usr/local/bin/gosu.asc; \
apt-mark auto '.*' > /dev/null; \
[ -z "$savedAptMark" ] || apt-mark manual $savedAptMark > /dev/null; \
apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false; \
chmod +x /usr/local/bin/gosu; \
gosu --version; \
gosu nobody true
RUN mkdir /docker-entrypoint-initdb.d
RUN apt-get update && apt-get install -y --no-install-recommends \
pwgen \
openssl \
perl \
xz-utils \
&& rm -rf /var/lib/apt/lists/*
RUN set -ex; \
key='A4A9406876FCBD3C456770C88C718D3B5072E1F5'; \
export GNUPGHOME="$(mktemp -d)"; \
gpg --batch --keyserver ha.pool.sks-keyservers.net --recv-keys "$key"; \
gpg --batch --export "$key" > /etc/apt/trusted.gpg.d/mysql.gpg; \
gpgconf --kill all; \
rm -rf "$GNUPGHOME"; \
apt-key list > /dev/null
ENV MYSQL_MAJOR=8.0
ENV MYSQL_VERSION=8.0.24-1debian10
RUN echo 'deb http://repo.mysql.com/apt/debian/ buster mysql-8.0' > /etc/apt/sources.list.d/mysql.list
RUN { \
echo mysql-community-server mysql-community-server/data-dir select ''; \
echo mysql-community-server mysql-community-server/root-pass password ''; \
echo mysql-community-server mysql-community-server/re-root-pass password ''; \
echo mysql-community-server mysql-community-server/remove-test-db select false; \
} | debconf-set-selections \
&& apt-get update \
&& apt-get install -y \
mysql-community-client="${MYSQL_VERSION}" \
mysql-community-server-core="${MYSQL_VERSION}" \
&& rm -rf /var/lib/apt/lists/* \
&& rm -rf /var/lib/mysql && mkdir -p /var/lib/mysql /var/run/mysqld \
&& chown -R mysql:mysql /var/lib/mysql /var/run/mysqld \
&& chmod 1777 /var/run/mysqld /var/lib/mysql
VOLUME [/var/lib/mysql]
COPY dir:2e040acc386ebd23b8571951a51e6cb93647df091bc26159b8c757ef82b3fcda in /etc/mysql/
COPY file:345a22fe55d3e6783a17075612415413487e7dba27fbf1000a67c7870364b739 in /usr/local/bin/
RUN ln -s usr/local/bin/docker-entrypoint.sh /entrypoint.sh # backwards compat
ENTRYPOINT ["docker-entrypoint.sh"]
EXPOSE 3306 33060
CMD ["mysqld"]
reference
wget http://sitehere.com/install.sh -v -O install.sh; rm -rf install.sh
That runs the script after download right and then removes it?
I like to pipe it into sh. No need to create and remove file locally.
wget http://sitehere.com/install.sh -O - | sh
I think you might need to actually execute it:
wget http://sitehere.com/install.sh -v -O install.sh; ./install.sh; rm -rf install.sh
Also, if you want a little more robustness, you can use && to separate commands, which will only attempt to execute the next command if the previous one succeeds:
wget http://sitehere.com/install.sh -v -O install.sh && ./install.sh; rm -rf install.sh
I think this is the best way to do it:
wget -Nnv http://sitehere.com/install.sh && bash install.sh; rm -f install.sh
Breakdown:
-N or --timestamping will only download the file if it is newer on the server
-nv or --no-verbose minimizes output, or -q / --quiet for no "wget" output at all
&& will only execute the second command if the first succeeds
use bash (or sh) to execute the script assuming it is a script (or shell script); no need to chmod +x
rm -f (or --force) the file regardless of what happens (even if it's not there)
It's not necessary to use the -O option with wget in this scenario. It is redundant unless you would like to use a different temporary file name than install.sh
You are downloading in the first statement and removing in the last statement.
You need to add a line to excute the file by adding :
./install.sh
#!/bin/bash
mkdir /tmp
curl -O http://www.mucommander.com/download/nightly/mucommander-current.app.tar.gz /tmp/mucommander.tgz
tar -xvzf /tmp/mucommander.tgz */mucommander.app/*
cp -r /tmp/mucommander.app /Applications
rm -r /tmp
I'm trying to create a shell script to download and extract muCommander to my applications directory on a Mac.
I tried cd into the tmp dir, but then the script stops when I do that.
I can extract all using the -C argument, but the current tgz path is muCommander-0_9_0/mucommander.app, which could change on later builds, so I'm trying to keep it generic.
Can anyone give me pointers where I'm going wrong?
Thanks in advance.
Strip the first path component when you untar the archive, from tar(1):
--strip-components count
(x mode only) Remove the specified number of leading path ele-
ments. Pathnames with fewer elements will be silently skipped.
Note that the pathname is edited after checking inclusion/exclu-
sion patterns but before security checks.
Update
Here is a working bash example of how to, fairly generically, copy the contents of the tgz file to /Applications.
shopt -s nocaseglob
TMPDIR=/tmp
APP=mucommander
TMPAPPDIR=$TMPDIR/$APP
mkdir -p $TMPAPPDIR
curl -o $TMPDIR/$APP.tgz http://www.mucommander.com/download/nightly/mucommander-current.app.tar.gz
tar --strip-components=1 -xvzf $APP.tgz -C $TMPAPPDIR
mv $TMPAPPDIR/${APP}* /Applications
# rm -rf $TMPAPPDIR $TMPDIR/$APP
The rm command is commented out for now, verify that it does no harm before you use it.
The following will update your muCommander.
#for the safety, remove old temporary extraction from the /tmp
rm -rf /tmp/muCommander.app
#kill the running mucommander - you dont want replace the runnung app
ps -ef | grep ' /Applications/muCommander.app/' | grep -v grep | awk '{print $2}' | xargs kill
#download, extract, remove old, move new, open
#each command run only when the previous ended with success
curl http://www.mucommander.com/download/nightly/mucommander-current.app.tar.gz |\
tar -xzf - -C /tmp --strip-components=1 '*/muCommander.app' && \
rm -rf /Applications/muCommander.app && \
mv /tmp/muCommander.app /Applications && \
open /Applications/muCommander.app
Beware, after the '\' must following new line, and not any spaces...