I'm following this tutorial: https://training-legacy.genexus.com/en/training/global/courses/smart-devices-en/introduction-to-genexus-16
and i have the Genexus 16-trial version.
In the end of the "First Transaction design" lesson, you have to send the changes to Genexus server,
but this is what happens when i open the "Team Development" page
If i enter the link in the message, from my browser https://sandbox.genexusserver.com/v16/ i can login normally, authenticating with Genexus Account and i can see my knowledge base in there.
I have pending commits, following the steps of the tutorial but i can't commit them. I wrote a commit message and pressed commit at the right bottom corner of the window and it rerturns a similar message:
error: GAM11: The user or password is incorrect.
Failed: Commit
The only 3 user and password i found were:
When creating the KB (if you disable Windows NT integrated security) but i couldn't find a valid user id and password for that, also the tutorial doesn't do this so i doubt this is it.
At tools -> Genexus Account, i can enter my email and password, and i think the IDE asks you to do this when sending the KB to the Server the first time, but when i fill it with the same credentials i use to login in to the website and press "sign in" now, it doesn't give any response.
Lastly There's the Windows Generic credential that is created but i don't even know how, just found it browsing at the genexus wiki and i have no idea what interaction it has with all this (if it does).
it is below preferences. If you do not have the view near KB explorer then you should go to the menu toolbar —> View —> Other tool windows --> preferences in order to activate it.
Team Development properties in Full Version
Note: Trial has no properties available below TeamDevelopment Tab
Team Development properties in Trial Version
Could you double check if you have the correct credentials below TeamDevelopment node?
Team Development
Related
Locally installed TFS2013, VS2015 and VS2013 using SharePoint services.
So far the development system is kind of OK, meaning I can create a collection, create a team project within a collection, add a new solution to that, run it, do a Check In and the SharePoint site shows the project code, etc. I can also create work items at the SharePoint site and from within Visual Studio.
But I'm having difficulty understanding how the user accounts are interacting. On my development workstation I logged in with a normal domain account. But I do not see work items assigned to that user name. I only see work items if they are assigned to the system Admin account.
I would have expected VS would be operating under the user account that I logged into Win10 with, but it seems to be operating as though VS is logged in as the system Admin.
Why is that? Is there a place where VS sets data that tells TFS what user name it is operating under? And, of course, I may be asking the wrong question because I don't understand the problem, but this is how it appears.
Added after initial post for clarity
This panel shot shows where the Work Items were not showing up for the user under Available Work Items. Because of the issue identified in the answer below, only work items assigned to Admin were present. But after clearing the cached credentials the work items displayed correctly according to the proper account, no longer acting as Admin.
This may due to the VS had cached your system Admin account.
The simplest way is to delete the related credentials which stored in control panel > Credential Manager> Windows Credentials
Then reopen the VS and try to connect to TFS server. It will pops up a credential window, just type your login domain account.
I've been trying out the examples provided by microsoft
SampleCredentialProvider
as a test i've compiled one of them and registered the dll. The logon screen now displays two additional tiles, "Administrator" and "Guest", Clicking on Administrator and providing a valid password allows me to login without issues,
however once I lock the screen and then do unlock, I re-enter the password but I get "Logon failure: unknown user name or bad password".
Has anyone come across such issues?
Could it be that the computers are part of domain?
Answered : I was using a beta version of the samples, always ensure you download the latest version
Changes include
• Fixing unlock. Post-Beta2, Windows Vista changed to require a KerbWorkstationUnlockLogon message type to unlock the machine and a KerbInteractiveLogon message type to log on to the machine. Previously it would accept a KerbInteractiveLogon message type for both logon and unlock. The samples have been updated accordingly. [v3.0]
I am looking for a simple way to get the latest version of source code from Visual Studio Online through automation (usually command line).
I cannot seem to authenticate to VSO with the credentials I use to logon to the website with the TF or TEE command line. I have also searched and found a TFSGet C# code that has authentication failure.
When I use the regular TF.EXE it cannot understand my workspace. Credentials are cached in Source Control Explorer and Workspace is mapped.
When I use the TEE CLC TF.CMD it cannot authenticate using the user#domain.com and password I use to sign on to the Visual Studio Online web site.
When I use the TFSGet C# program I get TFS Authenticaton Failed.
I read something about alternate credentials, but am completely confused because to set that up I need website address and callback URL. I've never set up a website and URL for a command-line application before.
What I really want is a KISS principle SFTP or secure WGET access to the latest version of my source code!
You're right, you need to enable alternate credentials. You were looking in the wrong place to set it up, though. It looks like you were trying to use a service hook.
Just follows steps 1 and 2 in the VSO OAuth documentation: Click on your user name, go to your user profile, then click on the "Credentials" tab and click on "Enable alternate credentials".
I initially installed the Microsoft Visual Studio Express 2013 for Web on my desktop. My desktop runs Windows 8.1 with internet explorer 11. It ran fine until the license expired after the first 30 days. I tried to sign in to renew the license, however after clicking the 'sign in' button I get an error dialog. The dialog states 'Browser is security restricted or javaScript is disabled. I have no other option but to close and exit Visual Studio.
I went to the online forums for Microsoft. There were discussions and suggestions on how to fix the error. I tried lowering the settings for the security tab in internet explorer. I have validated the option for scripting is enabled. I have also added https://*.visualstudio.com to the trusted sites tab. Other users on the forum have tried the same suggestions and have not succeeded in signing into the visual studio application.
I had exactly the same problem, here is what I did:
a) Go in IE, click on settings wheel then Internet Options and Security tab.
b) Click on Custom level button (make sure you select Internet zone).
c) In Security Settings window, under Scripting I set Enabled for Active scripting.
After that Sign In should work. Even though Chrome is default browser, it seems that VS uses IE for sign in process.
Hope this helps!
There is another issue people are running into that is a bug with the login dialog. The login dialog is using a Web Browser control to login the user. By default it loads up "about:blank" as the URI. It then proceeds to try to execute some JavaScript (just ";") to verify it has permissions to do so. On some machines this is problematic because "about:blank" has been mapped to zone 0, or the Local Machine zone. When the JavaScript is executed MSHTML will check the zone of the URI and then the policy for executing scripts. By default the Local Machine zone is locked down, and all script executions result in a Query policy. What this means is if you're running in immersion mode (aka in Internet Explorer) you will get a message box asking if you want to execute the script. However, the Web Browser control used by VS 2013's "Sign In" dialog doesn't run MSHTML code in immersion mode, so the Query policy effectively equates to a Disallow policy. The bug here is someone in VS assumed "about:blank" resolves to the Internet zone, and when it resolves to the Local Computer zone you get this behavior.
The workaround is to remove "about:blank" zone mapping. Point regedit to this key:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap\Domains]
Remove the "blank" key.
Alternatively you can change the Local Machine Lockdown policy for executing scripts. The reg key for that is:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Lockdown_Zones\0]
Set the "1400" DWORD value to 0.
There are many sites you need to list in your Trusted Sites. Following the trace of what the stupid, stupid login script does:
https://.visualstudio.com
https://app.vssps.visualstudio.com
https://.accesscontrol.windows.net
https://auth.gfx.ms
https://login.live.com
Only then was I able to log on to my FREE software.
Hi this is Albert from Microsoft. Just want to let you all know that this issue has been fixed in the upcoming Update 2 for Visual Studio 2013. Thanks for your patience while we figured this one out :)
Same problem "Browser is security restricted or JavaScript is disabled" here but the solution from #jic didn't work for me..
If you can and it is convenient for you this is a solution which worked for me:
I have created a new user/profile on my PC and for this user it was just working fine.
Before this action I have tried to make an user account which had this problem as:
Power user - didn't work
Administrator - didn't work as well
So the last solution in my case was a brand new user on the PC..
Here's what worked for me.
Open Control Panel, Internet Options.
First, I clicked the Security tab and turned security the security for the Internet zone to its minimum.
Next, click the Privacy tab, then click Advanced. Choose "Accept" for both types of cookies.
Of course you can change these all back after extending your VS trial.
you must change secure settings of iexplore for admin account. If logon by other account, you must start iexplore under admin account or logon under admin account, because you will get license after admin account.
Click on Start --> Run --> type cmd and click on OK.
Command Prompt will be opened. Then enter this command.
ipconfig /flushdns
and press Enter.
Now try to access https://app.vssps.visualstudio.com/Profile/View
It worked for me...
As I can not add a comment yet to the answer of CBGraham, I've to add this note over here:
The solution described from CBGraham worked for me (Thanks Graham). I had to add an additional link:
https://account.live.com
Then I opened the IE and tried to login to a Microsoft site. I left the IE window open and just clicked once again on the VS to login. Then it worked for me. Even with strong restrictions on the IE settings. While I'm surprised why someone should set down his security settings, just to register VS.
I am trying to access the report manager url for SSRS. But, I keep on getting the error below -
User mycomputer\myloginName does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
I tried to run my browser as admin as described here - User '' does not have required permissions, SSRS 2008 on Windows 8
with no success. I also don't see the 'site settings' on top-right corner as mentioned by so many people. Also, I cannot go through the pain of reinstalling SQL server all over again. I don't want to disable UAC.
I am unable to do anything because of this problem.
How do I fix this problem?
This solution is for Internet Explorer. I don't know how it can be done for firefox or chrome.
Link 1 -
http://social.msdn.microsoft.com/Forums/en-US/sqlexpress/thread/9b5a8763-84ce-46d0-b011-067ad39223d1/
See the solutions by Chirag Shah. Follow only up to step 13. I could not follow Step 14 because I found no home dialog box.
In the steps Chirag talks about some URL's. I don't really understand the meaning of any of those URL's. So, I used the URL under "Report Manager URL" in "Reporting Services Configuration Manager". It was
http://localhost:8080/MyReportServer.
The 8080 is a port number.
Once you finished this, go to the link below and follow all the steps -
http://www.soheib.com/technical-knowledge/sql-server-2012-reporting-services-uac-user-access-control/
In the 7th step, I saw a lot of check boxes. I selected all of them.
Finally, I can rest in peace. Hope it works for you too.
Also, when making the accounts described in the above link, you might see "BUILTIN\Administrators" account. Ignore it - thats what i did.
**END OF POST**
Steps taken from Chirag Shah's post -
Configure the report server for local administration. To access the report server and Report Manager locally, follow these steps:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Click Security.
Click Trusted Sites.
Click Sites.
Under Add this Web site to the zone, type http://ServerName. If you are not using HTTPS for the default site, click to clear the Require server certification (https:) for all sites in this zone check box.
Click Add.
Repeat step 7f and step 7g to add the http localhost URL, and then click Close.
Note This step enables you to start Internet Explorer and open either the localhost or the network computer name of the server for both the Report Server application and the Report Manager application.
Create role assignments that explicitly grant you access together with full permissions. To do this, follow these steps:
Start Internet Explorer together with the Run as administrator option. To do this, click Start, click All Programs, right-click Internet Explorer, and then click Run as administrator.
Open Report Manager. By default, the Report Manager URL is http://ServerName/reports. If you use SQL Server Express with Advanced Services SP2, the Report Manager URL is http://ServerName/reports$sqlexpress. If you use a named instance of Reporting Services, the Report Manager URL is http://ServerName/reports$InstanceName
i was receiving blank page after i was logging exactly 3 times on my report server URL.
i've Turn Off Internet Explorer Enhanced Security. On different OS's it is in different location. find the location and turn it off.
I hope this will help you.