I'm trying to build the last release of WebKitGTK (2.28.0) following the instructions they suggest here https://trac.webkit.org/wiki/BuildingGtk#BuildingWebKitGTKfromareleasetarball.
After extracting the downloaded tar.xz, I open that folder in a shell window and run the command:
cmake -DPORT=GTK -DCMAKE_BUILD_TYPE=RelWithDebInfo -GNinja
I previously installed Ninja via Homebrew:
brew install ninja
Unfortunately, I get some errors:
-- The following ICU libraries were not found:
-- data (required)
-- i18n (required)
-- uc (required)
CMake Error at /usr/local/Cellar/cmake/3.16.5/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:146 (message):
Failed to find all ICU components (missing: ICU_INCLUDE_DIR ICU_LIBRARY
_ICU_REQUIRED_LIBS_FOUND)
Call Stack (most recent call first):
/usr/local/Cellar/cmake/3.16.5/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:393 (_FPHSA_FAILURE_MESSAGE)
/usr/local/Cellar/cmake/3.16.5/share/cmake/Modules/FindICU.cmake:328 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
Source/cmake/OptionsGTK.cmake:28 (find_package)
Source/cmake/WebKitCommon.cmake:56 (include)
CMakeLists.txt:169 (include)
It seems like some libraries are not installed (data, i18n, uc). After trying to install uc via Homebrew, following the instructions in this StackOverflow answer, the same errors keep showing.
I am on a Mac machine, Mojave v. 10.14.6.
Related
-- Could NOT find LLVM (missing: LLVM_DIR)
CMake Error at /opt/_internal/cpython-3.7.6/lib/python3.7/site-packages/cmake/data/share/cmake-3.18/Modules/FindPackageHandleStandardArgs.cmake:165 (message):
Could NOT find LLVMAlt (missing: LLVM_PACKAGE_VERSION CLANG_EXECUTABLE
LLVM_FOUND LLVM_LINK_EXECUTABLE)
Call Stack (most recent call first):
/opt/_internal/cpython-3.7.6/lib/python3.7/site-packages/cmake/data/share/cmake-3.18/Modules/FindPackageHandleStandardArgs.cmake:458 (_FPHSA_FAILURE_MESSAGE)
cmake_modules/FindLLVMAlt.cmake:71 (find_package_handle_standard_args)
src/gandiva/CMakeLists.txt:28 (find_package)
I am currently trying to build a lighter wheel version of Apache Arrow for manylinux2014 using the guide in the Arrow repo here. I am on macOS Catalina 10.15.5 and have installed Docker desktop and have Xcode.
After getting this error, I ran brew install llvm and downloaded llvm 10.0.0_3 in /usr/local/Cellar/llvm/10.0.0_3/. I then did export LLVM_DIR=/usr/local/Cellar/llvm/10.0.0_3/lib/cmake as suggested here but am still getting the exact same error. What could I do here to allow me to run docker-compose run -e PYTHON_VERSION="3.8" centos-python-manylinux2014 without errors.
I'm trying to compile this project on Windows using MSYS2 with mingw64, and when running cmake . I get the following output:
-- Selecting Windows SDK version 10.0.17763.0 to target Windows 10.0.16299.
-- Build type: Release
-- Source of Randomness: random_device
CMake Error at C:/msys64/mingw64/share/cmake-3.13/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
Could NOT find OpenSSL, try to set the path to OpenSSL root folder in the
system variable OPENSSL_ROOT_DIR (missing: OPENSSL_CRYPTO_LIBRARY) (found
version "1.1.1b")
Call Stack (most recent call first):
C:/msys64/mingw64/share/cmake-3.13/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
C:/msys64/mingw64/share/cmake-3.13/Modules/FindOpenSSL.cmake:412 (find_package_handle_standard_args)
CMakeLists.txt:10 (find_package)
I have OpenSSL installed, as evidenced by:
$ which openssl
/mingw64/bin/openssl
$ openssl version
OpenSSL 1.1.1b 26 Feb 2019
And the OPENSSL_CRYPTO_LIBRARY that it seems to be looking for is either /mingw64/lib/libcrypto.a or /mingw64/lib/libcrypto.dll.a.
What's really throwing me for a loop is that in the CMake error message, it says "found version 1.1.1b", so clearly it is able to find it. Anyone have suggestions on how to resolve this error?
Turns out, I needed to add -G "Unix Makefiles" to my cmake command. By default it was producing Visual Studio solutions/projects, which is not what you want in mingw, and by adding this flag it was able to find the openssl files.
I am trying to compile libgit2 and followed the instruction on https://libgit2.github.com/docs/guides/build-and-link/ but lock so far.
Can someone tell me what to do?
Here is the result from my command line:
-- Building for: Visual Studio 12 2013
-- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE)
-- Could NOT find ZLIB (missing: ZLIB_LIBRARY ZLIB_INCLUDE_DIR)
-- zlib was not found; using bundled 3rd-party sources.
-- LIBSSH2 not found. Set CMAKE_PREFIX_PATH if it is installed outside of the default search path.
CMake Error at d:/cmake/share/cmake-3.3/Modules/FindPackageHandleStandardArgs.cmake:148 (message):
Could NOT find PythonInterp (missing: PYTHON_EXECUTABLE)
Call Stack (most recent call first):
d:/cmake/share/cmake-3.3/Modules/FindPackageHandleStandardArgs.cmake:388 (_FPHSA_FAILURE_MESSAGE)
d:/cmake/share/cmake-3.3/Modules/FindPythonInterp.cmake:162 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
CMakeLists.txt:594 (FIND_PACKAGE)
-- Configuring incomplete, errors occurred!
See also "D:/temp/gitlib/libgit2-master/build/CMakeFiles/CMakeOutput.log".
See also "D:/temp/gitlib/libgit2-master/build/CMakeFiles/CMakeError.log".
Thanks,
libgit2 uses python (works both with versions 2 and 3 of the language) to build the tests. You can install python or ask CMake not to build the tests.
IIRC CMake will look in a few standard locations you don't necessarily need python in your path, though it doesn't hurt.
If you would rather not build the tests, you can pass -DBUILD_CLAR=OFF so it doesn't bother looking for python.
Download Python from Paython.org and install it (i.e. d:\python). Then Open your VS command line and type PATH D:\Python\Python35-32;d:\cmake\bin;%PATH%
That's all set now, go to your build folder run cmake .. and then cmake --build .
I'm trying to compile a package using Ros Indigo. I'm using a Raspberry Pi running Raspbian. The BZIP2_LIBRARIES BZIP2_INCLUDE_DIR are missing. When I run the make command, I get the following error:
-- +++ processing catkin package: 'rosbag_storage'
-- ==> add_subdirectory(ros_comm/rosbag_storage)
-- Boost version: 1.49.0
-- Found the following Boost libraries:
-- date_time
-- filesystem
-- program_options
-- regex CMake Error at /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:97 (MESSAGE): Could NOT find BZip2 (missing: BZIP2_LIBRARIES BZIP2_INCLUDE_DIR) Call Stack (most recent call first): /usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:288 (_FPHSA_FAILURE_MESSAGE) /usr/share/cmake-2.8/Modules/FindBZip2.cmake:47 (FIND_PACKAGE_HANDLE_STANDARD_ARGS) ros_comm/rosbag_storage/CMakeLists.txt:8 (find_package)
-- Configuring incomplete, errors occurred! Invoking "cmake" failed
How can I add these libraries?
You need to install libbz2-dev, it should contain the header files required to compile your package.
For Ubuntu, use:
sudo apt-get install libbz2-dev
I'm trying to build the latest sources of keepassX on OS X which I have found here: http://gitorious.org/keepassx .
I'm getting this error message complaining about a missing Qt4 library:
ernst#cnap-b13-01 ~/Temp/keepassx/build
[264] : cmake [-DCMAKE_INSTALL_PREFIX=/usr/local] [-DCMAKE_VERBOSE_MAKEFILE=ON] [-DWITH_GUI_TESTS=ON] ..
CMake Error at /Applications/CMake 2.8-7.app/Contents/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:91 (MESSAGE):
Could NOT find Qt4 (missing: QT_QMAKE_EXECUTABLE QT_MOC_EXECUTABLE
QT_RCC_EXECUTABLE QT_INCLUDE_DIR QT_LIBRARY_DIR QT_QTCORE_INCLUDE_DIR
QT_QTCORE_LIBRARY QT_QTGUI_INCLUDE_DIR QT_QTGUI_LIBRARY
QT_QTTEST_INCLUDE_DIR QT_QTTEST_LIBRARY QT_UIC_EXECUTABLE) (Required is at
least version "4.6.0")
Call Stack (most recent call first):
/Applications/CMake 2.8-7.app/Contents/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:252 (_FPHSA_FAILURE_MESSAGE)
/Applications/CMake 2.8-7.app/Contents/share/cmake-2.8/Modules/FindQt4.cmake:1171 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
CMakeLists.txt:68 (find_package)
-- Configuring incomplete, errors occurred!
Any ideas on how to get this compiling?
I was able to solve this by installing the Qt SDK using the Mac OS X online installer and passing -DQT_QMAKE_EXECUTABLE=~/QtSDK/Desktop/Qt/4.8.1/gcc/bin/qmake to cmake.
Note that as the /Developer directory is no longer there with XCode 4.3 I also had to do sudo ln -s /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /Developer in order for keepassx to find some header files and compile successfully.
If Qt4 is installed in your system set QT_QMAKE_EXECUTABLE to the path for the qmake binary. You can do that in cmake-gui or ccmake. Or even with the -D parameter to cmake.
Use the option -no-framework when configuring qt:
./configure -no-framework -static -prefix ~/Libraries/qt-installed