Related
Basically I want to take as input text from a file, remove a line from that file, and send the output back to the same file. Something along these lines if that makes it any clearer.
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name > file_name
however, when I do this I end up with a blank file.
Any thoughts?
Use sponge for this kind of tasks. Its part of moreutils.
Try this command:
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | sponge file_name
You cannot do that because bash processes the redirections first, then executes the command. So by the time grep looks at file_name, it is already empty. You can use a temporary file though.
#!/bin/sh
tmpfile=$(mktemp)
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name > ${tmpfile}
cat ${tmpfile} > file_name
rm -f ${tmpfile}
like that, consider using mktemp to create the tmpfile but note that it's not POSIX.
Use sed instead:
sed -i '/seg[0-9]\{1,\}\.[0-9]\{1\}/d' file_name
try this simple one
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | tee file_name
Your file will not be blank this time :) and your output is also printed to your terminal.
You can't use redirection operator (> or >>) to the same file, because it has a higher precedence and it will create/truncate the file before the command is even invoked. To avoid that, you should use appropriate tools such as tee, sponge, sed -i or any other tool which can write results to the file (e.g. sort file -o file).
Basically redirecting input to the same original file doesn't make sense and you should use appropriate in-place editors for that, for example Ex editor (part of Vim):
ex '+g/seg[0-9]\{1,\}\.[0-9]\{1\}/d' -scwq file_name
where:
'+cmd'/-c - run any Ex/Vim command
g/pattern/d - remove lines matching a pattern using global (help :g)
-s - silent mode (man ex)
-c wq - execute :write and :quit commands
You may use sed to achieve the same (as already shown in other answers), however in-place (-i) is non-standard FreeBSD extension (may work differently between Unix/Linux) and basically it's a stream editor, not a file editor. See: Does Ex mode have any practical use?
One liner alternative - set the content of the file as variable:
VAR=`cat file_name`; echo "$VAR"|grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' > file_name
Since this question is the top result in search engines, here's a one-liner based on https://serverfault.com/a/547331 that uses a subshell instead of sponge (which often isn't part of a vanilla install like OS X):
echo "$(grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name)" > file_name
The general case is:
echo "$(cat file_name)" > file_name
Edit, the above solution has some caveats:
printf '%s' <string> should be used instead of echo <string> so that files containing -n don't cause undesired behavior.
Command substitution strips trailing newlines (this is a bug/feature of shells like bash) so we should append a postfix character like x to the output and remove it on the outside via parameter expansion of a temporary variable like ${v%x}.
Using a temporary variable $v stomps the value of any existing variable $v in the current shell environment, so we should nest the entire expression in parentheses to preserve the previous value.
Another bug/feature of shells like bash is that command substitution strips unprintable characters like null from the output. I verified this by calling dd if=/dev/zero bs=1 count=1 >> file_name and viewing it in hex with cat file_name | xxd -p. But echo $(cat file_name) | xxd -p is stripped. So this answer should not be used on binary files or anything using unprintable characters, as Lynch pointed out.
The general solution (albiet slightly slower, more memory intensive and still stripping unprintable characters) is:
(v=$(cat file_name; printf x); printf '%s' ${v%x} > file_name)
Test from https://askubuntu.com/a/752451:
printf "hello\nworld\n" > file_uniquely_named.txt && for ((i=0; i<1000; i++)); do (v=$(cat file_uniquely_named.txt; printf x); printf '%s' ${v%x} > file_uniquely_named.txt); done; cat file_uniquely_named.txt; rm file_uniquely_named.txt
Should print:
hello
world
Whereas calling cat file_uniquely_named.txt > file_uniquely_named.txt in the current shell:
printf "hello\nworld\n" > file_uniquely_named.txt && for ((i=0; i<1000; i++)); do cat file_uniquely_named.txt > file_uniquely_named.txt; done; cat file_uniquely_named.txt; rm file_uniquely_named.txt
Prints an empty string.
I haven't tested this on large files (probably over 2 or 4 GB).
I have borrowed this answer from Hart Simha and kos.
This is very much possible, you just have to make sure that by the time you write the output, you're writing it to a different file. This can be done by removing the file after opening a file descriptor to it, but before writing to it:
exec 3<file ; rm file; COMMAND <&3 >file ; exec 3>&-
Or line by line, to understand it better :
exec 3<file # open a file descriptor reading 'file'
rm file # remove file (but fd3 will still point to the removed file)
COMMAND <&3 >file # run command, with the removed file as input
exec 3>&- # close the file descriptor
It's still a risky thing to do, because if COMMAND fails to run properly, you'll lose the file contents. That can be mitigated by restoring the file if COMMAND returns a non-zero exit code :
exec 3<file ; rm file; COMMAND <&3 >file || cat <&3 >file ; exec 3>&-
We can also define a shell function to make it easier to use :
# Usage: replace FILE COMMAND
replace() { exec 3<$1 ; rm $1; ${#:2} <&3 >$1 || cat <&3 >$1 ; exec 3>&- }
Example :
$ echo aaa > test
$ replace test tr a b
$ cat test
bbb
Also, note that this will keep a full copy of the original file (until the third file descriptor is closed). If you're using Linux, and the file you're processing on is too big to fit twice on the disk, you can check out this script that will pipe the file to the specified command block-by-block while unallocating the already processed blocks. As always, read the warnings in the usage page.
The following will accomplish the same thing that sponge does, without requiring moreutils:
shuf --output=file --random-source=/dev/zero
The --random-source=/dev/zero part tricks shuf into doing its thing without doing any shuffling at all, so it will buffer your input without altering it.
However, it is true that using a temporary file is best, for performance reasons. So, here is a function that I have written that will do that for you in a generalized way:
# Pipes a file into a command, and pipes the output of that command
# back into the same file, ensuring that the file is not truncated.
# Parameters:
# $1: the file.
# $2: the command. (With $3... being its arguments.)
# See https://stackoverflow.com/a/55655338/773113
siphon()
{
local tmp file rc=0
[ "$#" -ge 2 ] || { echo "Usage: siphon filename [command...]" >&2; return 1; }
file="$1"; shift
tmp=$(mktemp -- "$file.XXXXXX") || return
"$#" <"$file" >"$tmp" || rc=$?
mv -- "$tmp" "$file" || rc=$(( rc | $? ))
return "$rc"
}
There's also ed (as an alternative to sed -i):
# cf. http://wiki.bash-hackers.org/howto/edit-ed
printf '%s\n' H 'g/seg[0-9]\{1,\}\.[0-9]\{1\}/d' wq | ed -s file_name
You can use slurp with POSIX Awk:
!/seg[0-9]\{1,\}\.[0-9]\{1\}/ {
q = q ? q RS $0 : $0
}
END {
print q > ARGV[1]
}
Example
This does the trick pretty nicely in most of the cases I faced:
cat <<< "$(do_stuff_with f)" > f
Note that while $(…) strips trailing newlines, <<< ensures a final newline, so generally the result is magically satisfying.
(Look for “Here Strings” in man bash if you want to learn more.)
Full example:
#! /usr/bin/env bash
get_new_content() {
sed 's/Initial/Final/g' "${1:?}"
}
echo 'Initial content.' > f
cat f
cat <<< "$(get_new_content f)" > f
cat f
This does not truncate the file and yields:
Initial content.
Final content.
Note that I used a function here for the sake of clarity and extensibility, but that’s not a requirement.
A common usecase is JSON edition:
echo '{ "a": 12 }' > f
cat f
cat <<< "$(jq '.a = 24' f)" > f
cat f
This yields:
{ "a": 12 }
{
"a": 24
}
Try this
echo -e "AAA\nBBB\nCCC" > testfile
cat testfile
AAA
BBB
CCC
echo "$(grep -v 'AAA' testfile)" > testfile
cat testfile
BBB
CCC
I usually use the tee program to do this:
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | tee file_name
It creates and removes a tempfile by itself.
Basically I want to take as input text from a file, remove a line from that file, and send the output back to the same file. Something along these lines if that makes it any clearer.
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name > file_name
however, when I do this I end up with a blank file.
Any thoughts?
Use sponge for this kind of tasks. Its part of moreutils.
Try this command:
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | sponge file_name
You cannot do that because bash processes the redirections first, then executes the command. So by the time grep looks at file_name, it is already empty. You can use a temporary file though.
#!/bin/sh
tmpfile=$(mktemp)
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name > ${tmpfile}
cat ${tmpfile} > file_name
rm -f ${tmpfile}
like that, consider using mktemp to create the tmpfile but note that it's not POSIX.
Use sed instead:
sed -i '/seg[0-9]\{1,\}\.[0-9]\{1\}/d' file_name
try this simple one
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | tee file_name
Your file will not be blank this time :) and your output is also printed to your terminal.
You can't use redirection operator (> or >>) to the same file, because it has a higher precedence and it will create/truncate the file before the command is even invoked. To avoid that, you should use appropriate tools such as tee, sponge, sed -i or any other tool which can write results to the file (e.g. sort file -o file).
Basically redirecting input to the same original file doesn't make sense and you should use appropriate in-place editors for that, for example Ex editor (part of Vim):
ex '+g/seg[0-9]\{1,\}\.[0-9]\{1\}/d' -scwq file_name
where:
'+cmd'/-c - run any Ex/Vim command
g/pattern/d - remove lines matching a pattern using global (help :g)
-s - silent mode (man ex)
-c wq - execute :write and :quit commands
You may use sed to achieve the same (as already shown in other answers), however in-place (-i) is non-standard FreeBSD extension (may work differently between Unix/Linux) and basically it's a stream editor, not a file editor. See: Does Ex mode have any practical use?
One liner alternative - set the content of the file as variable:
VAR=`cat file_name`; echo "$VAR"|grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' > file_name
Since this question is the top result in search engines, here's a one-liner based on https://serverfault.com/a/547331 that uses a subshell instead of sponge (which often isn't part of a vanilla install like OS X):
echo "$(grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name)" > file_name
The general case is:
echo "$(cat file_name)" > file_name
Edit, the above solution has some caveats:
printf '%s' <string> should be used instead of echo <string> so that files containing -n don't cause undesired behavior.
Command substitution strips trailing newlines (this is a bug/feature of shells like bash) so we should append a postfix character like x to the output and remove it on the outside via parameter expansion of a temporary variable like ${v%x}.
Using a temporary variable $v stomps the value of any existing variable $v in the current shell environment, so we should nest the entire expression in parentheses to preserve the previous value.
Another bug/feature of shells like bash is that command substitution strips unprintable characters like null from the output. I verified this by calling dd if=/dev/zero bs=1 count=1 >> file_name and viewing it in hex with cat file_name | xxd -p. But echo $(cat file_name) | xxd -p is stripped. So this answer should not be used on binary files or anything using unprintable characters, as Lynch pointed out.
The general solution (albiet slightly slower, more memory intensive and still stripping unprintable characters) is:
(v=$(cat file_name; printf x); printf '%s' ${v%x} > file_name)
Test from https://askubuntu.com/a/752451:
printf "hello\nworld\n" > file_uniquely_named.txt && for ((i=0; i<1000; i++)); do (v=$(cat file_uniquely_named.txt; printf x); printf '%s' ${v%x} > file_uniquely_named.txt); done; cat file_uniquely_named.txt; rm file_uniquely_named.txt
Should print:
hello
world
Whereas calling cat file_uniquely_named.txt > file_uniquely_named.txt in the current shell:
printf "hello\nworld\n" > file_uniquely_named.txt && for ((i=0; i<1000; i++)); do cat file_uniquely_named.txt > file_uniquely_named.txt; done; cat file_uniquely_named.txt; rm file_uniquely_named.txt
Prints an empty string.
I haven't tested this on large files (probably over 2 or 4 GB).
I have borrowed this answer from Hart Simha and kos.
This is very much possible, you just have to make sure that by the time you write the output, you're writing it to a different file. This can be done by removing the file after opening a file descriptor to it, but before writing to it:
exec 3<file ; rm file; COMMAND <&3 >file ; exec 3>&-
Or line by line, to understand it better :
exec 3<file # open a file descriptor reading 'file'
rm file # remove file (but fd3 will still point to the removed file)
COMMAND <&3 >file # run command, with the removed file as input
exec 3>&- # close the file descriptor
It's still a risky thing to do, because if COMMAND fails to run properly, you'll lose the file contents. That can be mitigated by restoring the file if COMMAND returns a non-zero exit code :
exec 3<file ; rm file; COMMAND <&3 >file || cat <&3 >file ; exec 3>&-
We can also define a shell function to make it easier to use :
# Usage: replace FILE COMMAND
replace() { exec 3<$1 ; rm $1; ${#:2} <&3 >$1 || cat <&3 >$1 ; exec 3>&- }
Example :
$ echo aaa > test
$ replace test tr a b
$ cat test
bbb
Also, note that this will keep a full copy of the original file (until the third file descriptor is closed). If you're using Linux, and the file you're processing on is too big to fit twice on the disk, you can check out this script that will pipe the file to the specified command block-by-block while unallocating the already processed blocks. As always, read the warnings in the usage page.
The following will accomplish the same thing that sponge does, without requiring moreutils:
shuf --output=file --random-source=/dev/zero
The --random-source=/dev/zero part tricks shuf into doing its thing without doing any shuffling at all, so it will buffer your input without altering it.
However, it is true that using a temporary file is best, for performance reasons. So, here is a function that I have written that will do that for you in a generalized way:
# Pipes a file into a command, and pipes the output of that command
# back into the same file, ensuring that the file is not truncated.
# Parameters:
# $1: the file.
# $2: the command. (With $3... being its arguments.)
# See https://stackoverflow.com/a/55655338/773113
siphon()
{
local tmp file rc=0
[ "$#" -ge 2 ] || { echo "Usage: siphon filename [command...]" >&2; return 1; }
file="$1"; shift
tmp=$(mktemp -- "$file.XXXXXX") || return
"$#" <"$file" >"$tmp" || rc=$?
mv -- "$tmp" "$file" || rc=$(( rc | $? ))
return "$rc"
}
There's also ed (as an alternative to sed -i):
# cf. http://wiki.bash-hackers.org/howto/edit-ed
printf '%s\n' H 'g/seg[0-9]\{1,\}\.[0-9]\{1\}/d' wq | ed -s file_name
You can use slurp with POSIX Awk:
!/seg[0-9]\{1,\}\.[0-9]\{1\}/ {
q = q ? q RS $0 : $0
}
END {
print q > ARGV[1]
}
Example
This does the trick pretty nicely in most of the cases I faced:
cat <<< "$(do_stuff_with f)" > f
Note that while $(…) strips trailing newlines, <<< ensures a final newline, so generally the result is magically satisfying.
(Look for “Here Strings” in man bash if you want to learn more.)
Full example:
#! /usr/bin/env bash
get_new_content() {
sed 's/Initial/Final/g' "${1:?}"
}
echo 'Initial content.' > f
cat f
cat <<< "$(get_new_content f)" > f
cat f
This does not truncate the file and yields:
Initial content.
Final content.
Note that I used a function here for the sake of clarity and extensibility, but that’s not a requirement.
A common usecase is JSON edition:
echo '{ "a": 12 }' > f
cat f
cat <<< "$(jq '.a = 24' f)" > f
cat f
This yields:
{ "a": 12 }
{
"a": 24
}
Try this
echo -e "AAA\nBBB\nCCC" > testfile
cat testfile
AAA
BBB
CCC
echo "$(grep -v 'AAA' testfile)" > testfile
cat testfile
BBB
CCC
I usually use the tee program to do this:
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | tee file_name
It creates and removes a tempfile by itself.
I have a input file, input.txt, and I want to run a command which should read two values from input.txt. Let us assume source name and destination name should be read from input and same command to be iterated thousands times based on input.txt.
Also the output of the command for each is to be stored in separate log. Is this possible with a singular input file or we need to use 2 files for source and destination? Request you to provide shell script to be used to achieve this as I am poor in shell scripting. I tried the below which is not working.
while read i j; do
command $i $j
done > output.txt
Sure. Suppose this is input.txt:
source1.txt dest1.txt
source2.txt dest2.txt
...
And you want to do this:
command source1.txt dest1.txt
command source2.txt dest2.txt
...
Here's a way:
while read i o; do
command $i $o
done < input.txt
This assumes that command command is already constructed to read from it's first argument and write to its second. If command instead prints to stdout (i.e., to the terminal screen), then replace command $i $o with command $i > $o. This also assumes that there are no spaces or funny characters in input.txt.
There is also a way that will be significantly faster if your input.txt has e.g. millions of lines or more:
awk '{printf "command %s\n", $0}' input.txt | sh
Or, if you must use command $i > $o:
awk '{printf "command %s > %s\n", $1, $2}' input.txt | sh
This method reads lines from input.txt and prints command source1.txt dest1.txt for the first line, command source2.txt dest2.txt for the second, etc... Then it "pipes" (|) those commands to sh, which executes them.
For error handling in command, try:
while read i o; do
command $i $o || command2 $i $o >> command2.log
done < input.txt 2> error.log
Or:
done < input.txt > error.log 2>&1
(One of these will work better, depending on whether command and command2 print their errors to stdout(1) or stderr(2).)
Say you want different outputs in different files, then on log file per command and one error file per command:
while read i o; do
command $i $o 2>"$i$o.err" >"$i$o.log"
done < input.txt
Error and log in same file: stderr is redirected to stdout thanks to 2>&1:
while read i o; do
command $i $o 2>&1 >"$i$o.log"
done < input.txt
You can also have all in same file output.log:
echo "" > output.log
while read i o; do
command $i $o 2>&1 >> output.log
done < input.txt
I have some files in fasta format and want to counts their reads and would like to have output in file names and their corresponding counts.
input file names:
1.fa
2.fa
3.fa
...
I tried:
for i in $(ls -t -v *.fa); do grep -c '>' $i > echo $i >> out.txt ; done
Problem:
It gives me out.txt but double file names and their counts by ':' separated. However, I need a tab and unique file names.
1.fa:7323580
1.fa:7323580
2.fa:5591179
2.fa:5591179
...
Suggested solution
grep -c '>' *.fa | sed 's/:/'$'\t'/ > out.txt
The $'\t\' is a Bash-ism called ANSI C Quoting.
Analysis of what went wrong
Your code is:
for i in $(ls -t -v *.fa); do grep -c '>' $i > echo $i >> out.txt ; done
It isn't a good idea to parse the output of the ls command. However, if your file names are well behaved (roughly, in the portable filename character set, which is [-A-Za-z._]), you'll be reasonably OK.
Your grep command, though, is confused. It is:
grep -c '>' $i > echo $i >> out.txt
That could be written more clearly as:
grep -c '>' $i $i > echo >> out.txt
This means 'count the number of lines containing > in $i, and then in $i again, and send the output first to a file echo, and then append to out.txt. Since the append overrides the redirection, the file echo is empty. You get the file name included in the output because there are two files to search; with only one file, you wouldn't get the file name too. (One way to ensure you get file names with regular (not -c or -l) grep is to scan /dev/null too. Many versions of grep also provide options to get the name explicitly, but POSIX doesn't mandate one. BSD grep uses -H; so does GNU grep.)
So, that's why you got the double file names and entries in your output.
Try this:
for i in $(ls -t -v *.fa)
do
c=$(grep -c '>' $i | awk -F: '{print $2}')
echo "$i: $c" >> out.txt
done
Basically I want to take as input text from a file, remove a line from that file, and send the output back to the same file. Something along these lines if that makes it any clearer.
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name > file_name
however, when I do this I end up with a blank file.
Any thoughts?
Use sponge for this kind of tasks. Its part of moreutils.
Try this command:
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | sponge file_name
You cannot do that because bash processes the redirections first, then executes the command. So by the time grep looks at file_name, it is already empty. You can use a temporary file though.
#!/bin/sh
tmpfile=$(mktemp)
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name > ${tmpfile}
cat ${tmpfile} > file_name
rm -f ${tmpfile}
like that, consider using mktemp to create the tmpfile but note that it's not POSIX.
Use sed instead:
sed -i '/seg[0-9]\{1,\}\.[0-9]\{1\}/d' file_name
try this simple one
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | tee file_name
Your file will not be blank this time :) and your output is also printed to your terminal.
You can't use redirection operator (> or >>) to the same file, because it has a higher precedence and it will create/truncate the file before the command is even invoked. To avoid that, you should use appropriate tools such as tee, sponge, sed -i or any other tool which can write results to the file (e.g. sort file -o file).
Basically redirecting input to the same original file doesn't make sense and you should use appropriate in-place editors for that, for example Ex editor (part of Vim):
ex '+g/seg[0-9]\{1,\}\.[0-9]\{1\}/d' -scwq file_name
where:
'+cmd'/-c - run any Ex/Vim command
g/pattern/d - remove lines matching a pattern using global (help :g)
-s - silent mode (man ex)
-c wq - execute :write and :quit commands
You may use sed to achieve the same (as already shown in other answers), however in-place (-i) is non-standard FreeBSD extension (may work differently between Unix/Linux) and basically it's a stream editor, not a file editor. See: Does Ex mode have any practical use?
One liner alternative - set the content of the file as variable:
VAR=`cat file_name`; echo "$VAR"|grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' > file_name
Since this question is the top result in search engines, here's a one-liner based on https://serverfault.com/a/547331 that uses a subshell instead of sponge (which often isn't part of a vanilla install like OS X):
echo "$(grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name)" > file_name
The general case is:
echo "$(cat file_name)" > file_name
Edit, the above solution has some caveats:
printf '%s' <string> should be used instead of echo <string> so that files containing -n don't cause undesired behavior.
Command substitution strips trailing newlines (this is a bug/feature of shells like bash) so we should append a postfix character like x to the output and remove it on the outside via parameter expansion of a temporary variable like ${v%x}.
Using a temporary variable $v stomps the value of any existing variable $v in the current shell environment, so we should nest the entire expression in parentheses to preserve the previous value.
Another bug/feature of shells like bash is that command substitution strips unprintable characters like null from the output. I verified this by calling dd if=/dev/zero bs=1 count=1 >> file_name and viewing it in hex with cat file_name | xxd -p. But echo $(cat file_name) | xxd -p is stripped. So this answer should not be used on binary files or anything using unprintable characters, as Lynch pointed out.
The general solution (albiet slightly slower, more memory intensive and still stripping unprintable characters) is:
(v=$(cat file_name; printf x); printf '%s' ${v%x} > file_name)
Test from https://askubuntu.com/a/752451:
printf "hello\nworld\n" > file_uniquely_named.txt && for ((i=0; i<1000; i++)); do (v=$(cat file_uniquely_named.txt; printf x); printf '%s' ${v%x} > file_uniquely_named.txt); done; cat file_uniquely_named.txt; rm file_uniquely_named.txt
Should print:
hello
world
Whereas calling cat file_uniquely_named.txt > file_uniquely_named.txt in the current shell:
printf "hello\nworld\n" > file_uniquely_named.txt && for ((i=0; i<1000; i++)); do cat file_uniquely_named.txt > file_uniquely_named.txt; done; cat file_uniquely_named.txt; rm file_uniquely_named.txt
Prints an empty string.
I haven't tested this on large files (probably over 2 or 4 GB).
I have borrowed this answer from Hart Simha and kos.
This is very much possible, you just have to make sure that by the time you write the output, you're writing it to a different file. This can be done by removing the file after opening a file descriptor to it, but before writing to it:
exec 3<file ; rm file; COMMAND <&3 >file ; exec 3>&-
Or line by line, to understand it better :
exec 3<file # open a file descriptor reading 'file'
rm file # remove file (but fd3 will still point to the removed file)
COMMAND <&3 >file # run command, with the removed file as input
exec 3>&- # close the file descriptor
It's still a risky thing to do, because if COMMAND fails to run properly, you'll lose the file contents. That can be mitigated by restoring the file if COMMAND returns a non-zero exit code :
exec 3<file ; rm file; COMMAND <&3 >file || cat <&3 >file ; exec 3>&-
We can also define a shell function to make it easier to use :
# Usage: replace FILE COMMAND
replace() { exec 3<$1 ; rm $1; ${#:2} <&3 >$1 || cat <&3 >$1 ; exec 3>&- }
Example :
$ echo aaa > test
$ replace test tr a b
$ cat test
bbb
Also, note that this will keep a full copy of the original file (until the third file descriptor is closed). If you're using Linux, and the file you're processing on is too big to fit twice on the disk, you can check out this script that will pipe the file to the specified command block-by-block while unallocating the already processed blocks. As always, read the warnings in the usage page.
The following will accomplish the same thing that sponge does, without requiring moreutils:
shuf --output=file --random-source=/dev/zero
The --random-source=/dev/zero part tricks shuf into doing its thing without doing any shuffling at all, so it will buffer your input without altering it.
However, it is true that using a temporary file is best, for performance reasons. So, here is a function that I have written that will do that for you in a generalized way:
# Pipes a file into a command, and pipes the output of that command
# back into the same file, ensuring that the file is not truncated.
# Parameters:
# $1: the file.
# $2: the command. (With $3... being its arguments.)
# See https://stackoverflow.com/a/55655338/773113
siphon()
{
local tmp file rc=0
[ "$#" -ge 2 ] || { echo "Usage: siphon filename [command...]" >&2; return 1; }
file="$1"; shift
tmp=$(mktemp -- "$file.XXXXXX") || return
"$#" <"$file" >"$tmp" || rc=$?
mv -- "$tmp" "$file" || rc=$(( rc | $? ))
return "$rc"
}
There's also ed (as an alternative to sed -i):
# cf. http://wiki.bash-hackers.org/howto/edit-ed
printf '%s\n' H 'g/seg[0-9]\{1,\}\.[0-9]\{1\}/d' wq | ed -s file_name
You can use slurp with POSIX Awk:
!/seg[0-9]\{1,\}\.[0-9]\{1\}/ {
q = q ? q RS $0 : $0
}
END {
print q > ARGV[1]
}
Example
This does the trick pretty nicely in most of the cases I faced:
cat <<< "$(do_stuff_with f)" > f
Note that while $(…) strips trailing newlines, <<< ensures a final newline, so generally the result is magically satisfying.
(Look for “Here Strings” in man bash if you want to learn more.)
Full example:
#! /usr/bin/env bash
get_new_content() {
sed 's/Initial/Final/g' "${1:?}"
}
echo 'Initial content.' > f
cat f
cat <<< "$(get_new_content f)" > f
cat f
This does not truncate the file and yields:
Initial content.
Final content.
Note that I used a function here for the sake of clarity and extensibility, but that’s not a requirement.
A common usecase is JSON edition:
echo '{ "a": 12 }' > f
cat f
cat <<< "$(jq '.a = 24' f)" > f
cat f
This yields:
{ "a": 12 }
{
"a": 24
}
Try this
echo -e "AAA\nBBB\nCCC" > testfile
cat testfile
AAA
BBB
CCC
echo "$(grep -v 'AAA' testfile)" > testfile
cat testfile
BBB
CCC
I usually use the tee program to do this:
grep -v 'seg[0-9]\{1,\}\.[0-9]\{1\}' file_name | tee file_name
It creates and removes a tempfile by itself.