profile logic in my application.properties file.My problem is when I use -dev ,it reads value from application-dev.properties.But I have same key which does not exist in my application-dev.properties but exist on application.properties,spring continue to read values from application.properties
application.properties
myfirstkey=x
mysecondkey=x
application-dev.properties
mysecondkey=dev
-Dspring.profiles.active=dev (// I pass profile value and see result by the way)
Output mysecondkey dev ,it is okay no problem
Output myfirstkey is x (my expectation is empty),but it doesnt exist in application-dev.properties?Is there anyway to prevent application.properties read
Well, application.properties are basically your 'default' .properties and you can't just (on a case-per-case basis) disable them, so the fix would be to do this in your -dev.properties.
myfirstkey=
Related
I have basic idea how spring profile works. But here in this file this - i am not able to get it. And current Application.yml file mentioning the three profile which one will get active and when that i need to know as well. Below is the Application.yml file content.
spring:
application:
name:
profiles:
active:
-default
-local
-swaggerinfo
Note: i have three config files present in my resources. Also if i want to look another config file
then spring use the naming convention like Application-<Name>.extension . so - is already get added for the new config file then why we explicitly need
to put another one in our application.yml file under spring.profile.active.
Below are the names of the three config files present under the resources folder.
application.yml
application-local.yml
bootstrap-default.yml
But here in this file this - i am not able to get it. spring use the
naming convention like Application-.extension . so - is already
get added for the new config file then why we explicitly need to put
another one in our application.yml file under spring.profile.active
spring:
application:
name:
profiles:
active:
-default
-local
-swaggerinfo
The declaration of profiles are incorrect. You must either put space or should not use (-) at all.
spring:
profiles:
active:
- default
- local
- swaggerinfo
The Spring also supports the following way of declarations.
spring:
profiles:
active: default,local,swaggerinfo
or
spring:
profiles:
active:
default
local
swaggerinfo
Here default refers to application.properties file not bootstrap-default.properties. Also, You don't need to specify the default profile. Spring automatically use application.properties as default one. So, in your case it's appropriate to go with local and swaggerinfo.
current Aplication.yml file mentioning the three profile which one
will get active and when that i need to know as well.
Let's talk about the following declaration.
spring:
profiles:
active:
- local
- swaggerinfo
Both local and swaggerinfo profiles will be active for props loading. So,which means that all the three files (application.yml by default) will be consumed by spring.
Let's talk about the order.
The order in the above case would be
application -> application-local -> application-swaggerinfo
Note:
Assume that you've mentioned the same prop in all the three files then in that case the precedence will be given as per the order highlighted above i.e prop mentioned in the application-swaggerinfo will override the ones available in the other twos.
I have a Spring boot application with different environments. I have a main application.yml with a set of properties and an application-test.yml for my test environment.
Inside my application.yml, I have the following config
spring:
liquibase:
enabled: false
user: ${SPRING_DATASOURCE_USERNAME}
password: ${SPRING_DATASOURCE_PASSWORD}
change-log: classpath:db/changelog-master.yaml
And inside my application-test.yml, I have the following
spring
liquibase:
user: sa
password: password
I was expecting my test environment to use liquibase.user and liquibase.password from the application-test.yml and pick the two other sub-properties (liquibase.enabled and liquibase.change-log) from application.yml. My reasoning was that in my test environment, the Application context would pick up all the properties in application.yml and then overwrite only the subkeys defined in application-test.yml, while keeping the original values of application.yml if not explicitly overwritten.
But that does not seem to be the case; it looks as if the key liquibase in my application-test.yml overwrites all the key and subkeys of the liquibase defined in application.yml.
Therefore since in my application-test.yml, liquibase.enabled and liquibase.change-log are not defined; the test environment does not know about these values. I was expecting them to be picked up from the main application.yml instead. I tried to define them manually in my application-test.yml and my tests work fine. If I remove them, my tests fail because they use the default properties for liquibase instead of liquibase.enabled: false and liquibase.change-log: classpath:db/changelog-master.yaml
What I would like to do is the following:
In my main application.yml, have
main_key:
sub_key_1: value_1
sub_key_2: value_2
sub_key_3: value_3
And in my application-test.yml, have only
main_key:
sub_key_1: test_value_1
have my test environment pickup sub_key_2: value_2 and sub_key_3: value_3 directly from application.yml, without them being overwritten by nothing in my test environment (since they are not defined in my application-test.yml)
Is it possible to have think kind of logic : if main_key.sub_key_2 is defined in application-test.yml is defined, then use it, otherwise use the main_key.sub_key_2 defined in application.yml ?
I feel that if I don't define all the sub_keys of my main_key in my application-test.yml, it is not possible to do it.
Many thanks for your help
Actually, I think I know why it does not work.
I had an empty application.yml inside my test/resources/application.yml. So I believe spring boot picks up the test/resources/application.yml instead of the src/main/resources/application.yml when test/resources/application.yml exists.
Which explains why the properties in my src/main/resources/application.yml were not picked up at all.
The solution was simply to delete the test/resources/application.yml
I want to setting the default logging level to error on springboot
enter image description here
But the console still has the dubug and info output. It seems that logging.level.root=error doesn't work.
Be carefull if you are using Spring Boot Devtools, the properties defined in $HOME/.config/spring-boot folder will override all other properties as specified in Spring Boot documentation : https://docs.spring.io/spring-boot/docs/current/reference/html/spring-boot-features.html
I found a environment variable named debug,even though its value is a string not true,which caused the problem.Actually,I tried to remove the variable before,but I didn't restart the eclipse.Now,I remove the varibale named DEBUG and restart the eclipse,and it success.
I would like to use a dynamic placeholder inside the PropertySource value options.
This is in order to have the ability to have one file for each environment which overrides the default one. Just like application.properties and application-dev.properties.
Current setup:
#PropertySource("classpath:ione.properties")
I would like to have something like
#PropertySource("classpath:ione-{optionalEnvName}.properties")
Thus reading the --spring.profiles.active=dev option.
Thanks!
Run with:
-Dspring.profiles.active=dev
and then:
#PropertySource("classpath:ione-${spring.profiles.active}.properties")
should work
I have use springboot to creat a project.
when I make yml file at src/main/resources/config or src/main/resources , I cant set :
spring:
profiles:
include:
- 'scheduling'
- 'yml'
in application.yml to appoint file file path,
and use #Value("${importance_info.message.notice}") to get the appointed value from
src/main/resources/config/application-scheduling.yml
but if I create yml not in the src/main/resources/config or src/main/resources, I can't get appointted value from it.
when I use #PropertySource(value = {"classpath:config/sub/sub-scheduling.yml"}), still can't get appointted.
Please tell me , how to make config or code to get appointed value from yml file in that file.